1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
|
From 7d0fc874871d79125b1c17b32fec9742b2f5839e Mon Sep 17 00:00:00 2001
From: Samuli Piippo <samuli.piippo@qt.io>
Date: Wed, 14 Sep 2016 10:22:27 +0300
Subject: [PATCH] Update only u-boot
---
flash_blk.scr | 4 ++--
flash_eth.scr | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/flash_blk.scr b/flash_blk.scr
index ae0fd5c..1b34c75 100644
--- a/flash_blk.scr
+++ b/flash_blk.scr
@@ -11,7 +11,7 @@ setenv update_kernel 'fatload ${interface} 0:1 ${fdt_addr_r} ${board_name}/zImag
setenv update_fdt 'fatload ${interface} 0:1 ${fdt_addr_r} ${board_name}/${soc}-colibri-${fdt_board}.dtb && ubi write ${fdt_addr_r} dtb ${filesize}'
setenv update_rootfs 'fatload ${interface} 0:1 ${fdt_addr_r} ${board_name}/ubifs.img && ubi write ${fdt_addr_r} rootfs ${filesize}'
-setenv update_new 'run update_uboot; run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs; reset'
+setenv update_new 'run update_uboot; reset'
# Upgrade part 1, write new U-Boot, but with old ECC format still...
# Store config block temporarly in memory at kernel_addr_r.
@@ -19,7 +19,7 @@ setenv upgrade_part1 'run update_uboot && nand read ${kernel_addr_r} 0x800 0x20
setenv upgrade_part1_msg 'Successfully updated U-Boot, NAND upgrade required. Enter "reset", interrupt boot process and enter "run setupdate; run upgrade_part2" to complete upgrade.'
# Upgrade part 2, use new ECC format for the whole device...
-setenv upgrade_part2 'run create_bcb && nand write ${kernel_addr_r} 0x800 0x20 && run update_uboot && nand erase.part ubi && run update_rootfs && echo ${upgrade_part2_msg}'
+setenv upgrade_part2 'run create_bcb && nand write ${kernel_addr_r} 0x800 0x20 && run update_uboot && echo ${upgrade_part2_msg}'
setenv upgrade_part2_msg 'Successfully upgraded module, enter "reset" to restart the module.'
# fsl_nfc indicates old NAND format (24-bit ECC), start migration process
diff --git a/flash_eth.scr b/flash_eth.scr
index b0e4904..0a8e3cc 100644
--- a/flash_eth.scr
+++ b/flash_eth.scr
@@ -11,7 +11,7 @@ setenv update_kernel 'tftpboot ${fdt_addr_r} ${board_name}/zImage && ubi write $
setenv update_fdt 'tftpboot ${fdt_addr_r} ${board_name}/${soc}-colibri-${fdt_board}.dtb && ubi write ${fdt_addr_r} dtb ${filesize}'
setenv update_rootfs 'tftpboot ${fdt_addr_r} ${board_name}/ubifs.img && ubi write ${fdt_addr_r} rootfs ${filesize}'
-setenv update_new 'run update_uboot; run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs; reset'
+setenv update_new 'run update_uboot; reset'
# Upgrade part 1, write new U-Boot, but with old ECC format still...
# Store config block temporarly in memory at kernel_addr_r.
@@ -19,7 +19,7 @@ setenv upgrade_part1 'run update_uboot && nand read ${kernel_addr_r} 0x800 0x20
setenv upgrade_part1_msg 'Successfully updated U-Boot, NAND upgrade required. Enter "reset", interrupt boot process and enter "run setupdate; run upgrade_part2" to complete upgrade.'
# Upgrade part 2, use new ECC format for the whole device...
-setenv upgrade_part2 'run create_bcb && nand write ${kernel_addr_r} 0x800 0x20 && run update_uboot && nand erase.part ubi && run update_rootfs && echo ${upgrade_part2_msg}'
+setenv upgrade_part2 'run create_bcb && nand write ${kernel_addr_r} 0x800 0x20 && run update_uboot && echo ${upgrade_part2_msg}'
setenv upgrade_part2_msg 'Successfully upgraded module, enter "reset" to restart the module.'
# fsl_nfc indicates old NAND format (24-bit ECC), start migration process
|
