imx8mnul-ddr3l-evk: Add i.MX 8M Nano UltraLite EVK machine

The new machine is currently supported only by linux-imx and u-boot-imx.

Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>

1 files changed, 69 insertions, 0 deletions

diff --git a/conf/machine/imx8mnul-ddr3l-evk.conf b/conf/machine/imx8mnul-ddr3l-evk.conf
new file mode 100644
index 000000000..9d7bafd6f
--- /dev/null
+++ b/conf/machine/imx8mnul-ddr3l-evk.conf
@@ -0,0 +1,69 @@
+#@TYPE: Machine
+#@NAME: NXP i.MX 8MNUL EVK with DDR3L
+#@SOC: i.MX8MN
+#@DESCRIPTION: Machine configuration for NXP i.MX 8M Nano UltraLite Evaluation Kit with DDR3L
+#@MAINTAINER: Jun Zhu <junzhu@nxp.com>
+
+MACHINEOVERRIDES =. "imx-boot-container:mx8mnul:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+MACHINE_FEATURES += "wifi bluetooth bcm43455 bcm4356"
+
+# NXP BSP can consume proprietary jailhouse and Broadcom drivers
+# OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
+# a full support for it yet.
+MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359"
+
+KERNEL_DEVICETREE_BASENAME = "imx8mn-ddr3l-evk"
+KERNEL_DEVICETREE = " \
+    freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
+"
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
+    freescale/${KERNEL_DEVICETREE_BASENAME}-ak5558.dtb \
+    freescale/${KERNEL_DEVICETREE_BASENAME}-rpmsg.dtb \
+"
+
+UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
+
+IMX_DEFAULT_BOOTLOADER = "u-boot-imx"
+IMX_DEFAULT_KERNEL = "linux-imx"
+
+UBOOT_SUFFIX = "bin"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG_BASENAME      = "imx8mn_ddr3l_evk"
+UBOOT_CONFIG[sd]   = "${UBOOT_CONFIG_BASENAME}_config,sdcard"
+UBOOT_CONFIG[fspi] = "${UBOOT_CONFIG_BASENAME}_defconfig"
+
+SPL_BINARY = "spl/u-boot-spl.bin"
+
+ATF_PLATFORM = "imx8mn"
+
+# Set DDR FIRMWARE
+DDR_FIRMWARE_VERSION = "201810"
+DDR_FIRMWARE_NAME = " \
+    ddr3_dmem_1d_${DDR_FIRMWARE_VERSION}.bin \
+    ddr3_imem_1d_${DDR_FIRMWARE_VERSION}.bin \
+"
+
+# Set imx-mkimage boot target
+IMXBOOT_TARGETS_BASENAME = "flash_ddr3l_evk"
+IMXBOOT_TARGETS = " \
+    ${@bb.utils.contains('UBOOT_CONFIG', 'fspi', '${IMXBOOT_TARGETS_BASENAME}_flexspi', \
+                                                 '${IMXBOOT_TARGETS_BASENAME}', d)}"
+
+IMX_BOOT_SOC_TARGET = "iMX8MN"
+
+SERIAL_CONSOLES = "115200;ttymxc1"
+
+IMAGE_BOOTLOADER = "imx-boot"
+
+BOOT_SPACE = "65536"
+LOADADDR = ""
+UBOOT_MAKE_TARGET = "all"
+UBOOT_MAKE_TARGET:pn-u-boot-imx = ""
+IMX_BOOT_SEEK = "32"
+
+OPTEE_BIN_EXT = "8mnul"