summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* linux-timesys: Remove unused kernelOtavio Salvador2016-04-194-236/+0
| | | | | | | | The Vybrid reference board (twr-vf65gs10) now uses the linux-fslc (4.1) kernel. This makes this kernel recipe unused. Remove it as it has known security flaws, toolchain problems and is quite old. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* twr-vf65gs10: move to Linux 4.1 based linux-fslc treeStefan Agner2016-04-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Change the default Kernel to the linux-fslc 4.1 kernel. What seems to work: - UART - CPU/Memory (obviously) and L2 Cache - ARM global timer as clock source - Pinctrl/GPIO support - SD-Card - USB Host (according to bootlog, not tested) - SoC internal RTC (SNVS RTC) - Watchdog Not tested, but should be working: - Audio using SGTL5000 connected via SAI (hardware not available) - DCU Framebuffer device (hardware not available) - Ethernet PHYs (not sure, might be a hardware issue) Known to be missing: - Spansion Flash S25FL128S connected via QuadSPI - MCC v1 and v2 - Touchscreen with TWR-LCD-RGB (according to Tony) Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-fslc (4.1): Add defconfig for Vybrid SoCsStefan Agner2016-04-191-0/+322
| | | | | | | | Add an optimized defconfig for Vybrid which includes NFC (NAND) and DCU (fbdev) support for Vybrid. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-fslc (4.1): Update to latest version 622e3d41Stefan Agner2016-04-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates linux-fslc to the latest version which includes the Vybrid related patches. 622e3d4 video: fsl-dcu-fb: fix compile issue without PM_RUNTIME b71a77f video: fsl-dcu-fb: fix pixel clock polarity 55a3f93 video: fsl-dcu-fb: add suspend/resume support 526c502 video: fsl-dcu-fb: fix signal polarity defines 3b5d7a3 ARM: dts: vf610-colibri: enable DCU framebuffer 0614d77 video: fsl-dcu-fb: support signal polarity configuration 202f53d video: fsl-dcu-fb: use native-display timing 1f632a8 video: fsl-dcu-fb: use num_timings to iterate timings 5801959 Documentation: DT: Add DCU framebuffer driver 5afe56f fb: Add DCU framebuffer driver for Vybrid VF610 platform fdad0f6 ARM: clk: vf610: Add DCU and TCON clock support 0cdb0dc ARM: dts: vf610-twr: Enable DCU and TCON devices ca0333a ARM: dts: vf610: Add DCU and TCON nodes 463b5a3 ARM: dts: vf-colibri: enable NAND flash controller e439239 ARM: dts: vf610twr: add NAND flash controller peripherial 031328c mtd: nand: vf610_nfc: include missing pincrl/consumer.h 5812299 mtd: nand: vf610_nfc: add device tree bindings 48ea668 mtd: nand: vf610_nfc: add hardware BCH-ECC support ce28974 mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others 4fc9a49 mtd: nand: add common DT init code Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-fslc (4.1): Update to revision 14b3c25bFabio Estevam2016-04-191-1/+1
| | | | | | | This merges the 4.1.11 stable release fixes into the fork. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* efl: fix build with current master meta-oe/oe-coreAndreas Müller2016-04-191-6/+14
| | | | | | | | | | | | | | | fixes: | In file included from /home/a.mueller/tmp/oe-core-glibc/sysroots/zeravarimx6q/usr/include/EGL/eglplatform.h:38:0, | from /home/a.mueller/tmp/oe-core-glibc/sysroots/zeravarimx6q/usr/include/EGL/egl.h:39, | from ../src/modules/evas/engines/gl_common/evas_gl_api_ext.h:7, | from ../src/modules/evas/engines/gl_common/evas_gl_core_private.h:5, | from modules/evas/engines/gl_generic/evas_engine.c:2: | /home/a.mueller/tmp/oe-core-glibc/sysroots/zeravarimx6q/usr/include/EGL/eglvivante.h:266:2: error: #error "Platform not recognized" | #error "Platform not recognized" | ^ Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
* imx6ulevk: Configure machine to use u-boot SPLDaiane Angolini2016-04-191-0/+3
| | | | | | | | | | | | | | At first, this machine was supported only by u-boot-imx U-Boot provider, however as soon as u-boot-fslc included this support, the U-Boot provider was changed. During the change of default U-Boot provider, the SPL configuration end up being missed. The needed SPL configuration is set up in this patch. Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: add default tune for VybridStefan Agner2016-04-191-0/+1
| | | | | | | | All Vybrid SoC's use the Cortex-A5 CPU. Add an appropriate default tune for the vf SoC. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* image_types_fsl.bbclass: Fix image generation for i.MX 6UltraLiteFelipe Provenzano2016-04-191-0/+1
| | | | | | | | | | | | | | When the i.MX 6UltraLite (mx6ul) was separated from the SoC family mx6 (commit 24396b28f0137464cd82b9a19f705c1db180ead2) it started to create invalid sdcard images. This is because of SDCARD_GENERATION_COMMAND no more being triggered. The solution in this moment is add a mx6ul override for the SDCARD_GENERATION_COMMAND definition. Signed-off-by: Felipe Provenzano <felipeprovenzano@maxtrack.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision a4338ecfOtavio Salvador2016-04-192-2/+2
| | | | | | | This merges the v2015.10 final changes onto the FSLC fork, bringing the fixes done on top of the rc5 release. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* Remove unused patch filesOtavio Salvador2016-04-197-589/+0
| | | | | | | | Those patch files were left orphan when upgrading the linux-imx and u-boot-imx recipes, becoming unused. The removal of them cause no harm and helps to keep the metadata clean. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* image_types_fsl.bbclass: Use FAT 32 for images larger than 512MBTzu-Jung Lee2016-04-191-1/+8
| | | | | | | | | | | | | | | Refers to the following commit of poky for more detail. commit 722430a488f39bf583e4a557a254fb84fae4d0a7 Author: Darren Hart <dvhart@linux.intel.com> Date: Wed Dec 12 14:39:15 2012 -0800 bootimg: Use FAT 32 for images larger than 512MB Fixes [YOCTO #2138] Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 982a6474 revisionOtavio Salvador2016-04-192-2/+2
| | | | | | | | | | | | | | | | | Update the U-Boot fork to a 2015.10-rc5 based version. This brings several fixes for i.MX and Vybrid based systems. Mainly: cf04ad3 arm: vf610twr: improve memory layout d45fd01 colibri_vf: Fix bstlen field e24bb2b mtd: nand: vf610_nfc: resync with upstream Linux version f861f51 ls102xa: Fix reset hang f532727 imx_watchdog: Add a header file for watchdog registers 040ef8f pcm052: fix MTD partitioning 61903b7 imximage: fix commands other than write_data 835c30e imximage: header.length of 4 is valid Change-Id: Ifdb607d9a94ef594f3fe37d2b6388dc9a8268106 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* image_types_fsl.bbclass: Fail if a Device Tree file is missingOtavio Salvador2016-04-191-0/+2
| | | | | | | | | | | | | | | | | | | When generating the rootfs we need to include all the referenced Device Tree files. The code were gracefully checking if the file existed before building the image however the expected behavior is to fail. As consequence of this change, if someone is using a very old kernel (no Device Tree based) and tries to generate an image, it will fail until the machine definition is changed to not list Device Tree files for installation. Currently all machines supported by meta-fsl-arm BSP are consistent for the default kernel in use however custom BSP may need to be changed accordingly. Change-Id: I548c65c61dfefe24154a455d097032b1598b14d3 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* image_types_fsl.bbclass: Refactor boot image duplicated codeOtavio Salvador2016-04-191-47/+42
| | | | | | | | | The code which copies the boot scripts and Device Tree files is duplicated across the different image types. This patch reworks this code to avoid this duplication. Change-Id: Ib9405067a5419e1b295dfac9e3d3bd9b896d424e Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-fslc (4.1): Add Vybrid SoC to compatible machinesStefan Agner2016-04-191-1/+1
| | | | | | | | | Upstream Linux 4.1 supports the Vybrid SoC quite well, so enable linux-fslc also for Vybrid SoC's. Change-Id: I6745b67f4cc4b12ccc6f05754af9241e60731c6a Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Set a default provider for u-boot-mxsboot-nativeOtavio Salvador2016-04-191-0/+2
| | | | | | | | | | | | | The O.S. Systems Embedded Linux provides an alternative version of U-Boot and, for completeness, an alternative recipe for u-boot-mxsboot-native. The provider, in imx-base.inc, had no default thus raising a warning. This turns the u-boot-fslc-mxsboot-native as the default provider but allows custom distributions to override it. Change-Id: I46799f9ec744a074d95c383561cf0cbddb26e151 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* opencv: Use the 2.4 release onlyOtavio Salvador2016-04-192-0/+4
| | | | | | | | | | | | | | | | The opencv 3.0 is not tested and does not have the i.MX6 specific patch ported so we disable it for the i.MX6 SoC from Quad, DualLite, SoloX and SoloLite families. The 2.4 is used instead. This fixes following warning: ,---- | NOTE: multiple providers are available for runtime opencv-samples (opencv-samples, opencv) | NOTE: consider defining a PREFERRED_PROVIDER entry to match opencv-samples `---- Change-Id: I2f897cdd31dcee9046ee7d28ef4dcadb154ae88c Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mesa-gl: Blacklist the recipe for i.MX6 SoCs with GPUOtavio Salvador2016-04-191-0/+4
| | | | | | | | | | | | | | | | | | The mesa-gl is not in sure for the i.MX6 SoC from Quad, DualLite, SoloX and SoloLite families. The full featured, but trimmed, mesa is used instead. This fixes following warning: ,---- | NOTE: multiple providers are available for runtime libgl-mesa-dev (mesa, mesa-gl) | NOTE: consider defining a PREFERRED_PROVIDER entry to match libgl-mesa-dev | NOTE: multiple providers are available for runtime mesa-driver-swrast (mesa, mesa-gl) | NOTE: consider defining a PREFERRED_PROVIDER entry to match mesa-driver-swrast `---- Change-Id: I082b8f7a739e4ea3cfe5f1760c7163d118e9883c Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-qoriq: fix gcc 5.2 build issues of ls1021atwrZhenhua Luo2016-04-194-0/+163
| | | | | | | | | | Cherry picked patches from future kernel versions to fix gcc5.2 build errors (Port from meta-fsl-arm rev: d4da62e1972d78a0ebfa51e6bad232732144e4b2) Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
* cryptodev-qoriq: Fix runtime providers so 'cryptodev' is not taken as providerZhenhua Luo2016-04-191-0/+9
| | | | | | | | | QorIQ targets should use FSL custom cryprodev instead of the one provided by poky, fix the runtime providers to ensure 'cryptodev-qoriq' is taken as provider. Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* t4240qds.conf: add missing quotation markZhenhua Luo2016-04-191-1/+1
| | | | | Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-fslc-mx6: Update revision to 964e5a3 revisionOtavio Salvador2016-04-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 964e5a3 revision includes the 3.14.54 stable release fixes plus following changes contributed by Gateworks: 7292dc7 ASoC: add tda1997x codec support aa4ee3d ipu3: keep buffer offset aligned 05608b5 ipu3: fix stripe calculation 30c6d90 thermal: imx: allow crit_delta to be passed in via kernel param 334fc35 arm: dts: add handles to anatop regulators c7a4d85 fec: Russell Kings corruption fix 0c2c11f net: fec: fix the warning found by dma debug b5b53b5 pci: imx6: Add delay after LTSSM transition 6dba6b0 fec_main: add mb() before setting status 05ab2a6 net: fec: fix NULL pointer dereference in fec_enet_timeout_work 07465db drivers: video: mxc: Add support for interlace on hdmi out 3eca3ca imx: thermal: use CPU temperature grade info for thresholds 172ad49 media: pci: tw6869: Implement ENUM_FRAMESIZES ioctl a7d429e media: pci: tw6869: add device registered dev info 957f3fa media: pci: tw6869: initial add cb61124 ARM: dts: imx: fix invalid #address-cells value ea53bf7f imx:busfreq: disable busfreq driver by default e3e114d video: mxc: ldb: use native mode for display timings fa6b13a net: igb: register mii_bus for SerDes w/ external phy 09359b6 net: igb: add phy read/write functions that accept phy addr d6daeac net: igb: add i210/i211 support for phy read/write 00b2ceb video: mxc: add adv739x TV encoder 3117a93 mxc_capture: add tda1997x HDMI receiver video support 9348099 imx: add imx tda1997x i2s DAI support b81d263 mfd: add tda1997x HDMI receiver support dba225f mxc_capture: check for init_camera_struct failure 09f7c1f mxc_capture: add device registration info 1db12fc mxc_hdmi: present sysfs edid as binary data instead of ascii bd0601d mxc_hdmi: enable overflow interrupt after initialization complete d6cc9e6 mxc_ipuv3: show device name for overlay fb a7f44be mxc_ipuv3: show ipu_id/disp_id of registered device e9ea090 regulator: Add LTC3676 support 3e12a168 regulator: core: Fix the init of DT defined fixed regulators 154b8be hwmon: mma8451: add fxos8700 magnetometer support e19d671 hwmon: mma8451: add fxos8700 accel support 760c31c cpufreq: imx: add a 25mV tollerance to the operating point voltages ef2eda1 cpufreq: imx: show soc voltage when debugging b205762d cpufreq: imx: init mutex before it can be used 04bc9ed input: edt-ft5x06 - add device-tree config for screen res and inversion 1ca89b6 Input: edt-ft5x06 - fix an i2c write for M09 support dc5f6c9 Input: edt-ft5x06 - add a missing condition f2854dd Input: edt-ft5x06 - add support for M09 firmware version 390394c Input: edt-ft5x06 - ignore touchdown events 6b60fb3 Input: edt-ft5x06 - adjust delays to conform datasheet 74bceb0 Input: edt-ft5x06 - add DT support 481da81 input: goodix: add invert and rotate support via device-tree 6297f18 input: goodix: add support for performing init sqequence 4746ef3 input: goodix: add device-tree support For compatibility with the Vivante kernel module build, the following commit has be also applied: 964e5a3 FSLC: Add busfreq-imx.h header for forward compatibility Change-Id: I92b566943c7245751b484302f2320b42ec7d761c Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* kernel-module-imx-gpu-viv: Fork driver for FSL CommunityOtavio Salvador2016-04-194-211/+17
| | | | | | | | | | | | The driver source code provided by Freescale needs fixes. This fork is a community driven development and allow faster development and easier integration of fixes. The "+fslc" suffix is added to the module during probing to make a clear identification. Change-Id: I914f1a7731263effdef75827e3a9fb8daba37ec9 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Ensure MACHINE_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT is expandedOtavio Salvador2016-04-191-1/+1
| | | | | | | | | The MACHINE_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT needs to be expanded and cannot have a default overriden later, otherwise it does not respect the default set in the SoC. Change-Id: I1d90d173603e6ee258f3e05c7a53e576b3b1f552 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx7dsabresd: Use U-Boot FSLC by defaultOtavio Salvador2016-04-191-3/+0
| | | | | | | | The U-Boot 2015.10 adds support for the i.MX7 so we can use it instead of Freescale fork, preferring the mainline code. Change-Id: Ib375f8aa10a482b631eb99d7b5eb86866c87351e Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx6ulevk: Use U-Boot FSLC by defaultOtavio Salvador2016-04-191-3/+0
| | | | | | | | The U-Boot 2015.10 adds support for the i.MX6 UltraLite so we can use it instead of Freescale fork, preferring the mainline code. Change-Id: I5dc770bcecd14120b5478b67d9a47eebfc834300 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 2015.10-based forkOtavio Salvador2016-04-194-10/+10
| | | | | | | | | This updates the fork based on upcoming 2015.10 release. This is currently based on 2015.10-rc3 tag and offers a very solid release for start the tests for Yocto Project 2.0 release. Change-Id: I1d35409a9806a96f8dd538e2b8c2a3520e9104ba Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-gpu-viv.inc: Stop adding libglapi as runtime dependencyOtavio Salvador2016-04-191-1/+0
| | | | | | | | The runtime dependency of libglapi is automatically added due the symbols use by the libGL library, so we can stop adding it manually. Change-Id: I590f25226cf2d8e2bf1f82dccd05db0b0d734b86 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-gpu-viv.inc: Allow libGL libraries to be installed without X11Otavio Salvador2016-04-191-10/+0
| | | | | | | | The libGL libraries has been fixed to so the libraries can now be used with the other backends. This removed the old FIXME item. Change-Id: I99c7e68591a11fd590982690a8502bb60dc65513 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* kernel-module-imx-gpu-viv: Better work-around for change in name of ↵Gary Thomas2016-04-193-36/+38
| | | | | | | | | | | busfreq-imx.h The renaming of include/linux/busfreq-imx6.h to include/linux/busfreq-imx.h is not consistent over the many kernel versions currently being built. This changeset works around this inconsistency by creating a local symbolic link to whatever file is actually present in the kernel sources. Signed-off-by: Gary Thomas <gary@mlbassoc.com>
* qt4: Fix *.la pollutionGary Thomas2016-04-191-0/+5
| | | | | | | | | | | | | | | | Recent [platform dependent] changes to QT_CONFIG_FLAGS allow some C-preprocessor defines to creep into *.la (libtool) files. This are not allowed (or even handled) and cause linker errors when trying to link against these libraries. This patch removes the incorrect/erroneous preprocessor directives to leave the *.la files useable once again. The change is done in a post-processing step to clean up the *.la files as they are only used externally to this package. Signed-off-by: Gary Thomas <gary@mlbassoc.com> Upstream-status: Innapropriate [OE patch causes the problem] Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* image_types_fsl.bbclass: make mkfs.vfat use FAT32 in all casesSchrempf Frieder2016-04-191-3/+4
| | | | | | | | | as otherwise FAT16 might be used, which seems quite outdated and can cause issues in certain environments (e.g. older versions of U-Boot) Change-Id: I2d89ad235084c4a1289fae180df043a2f9e05e63 Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Drop explicit 'ext4' filesystem from IMAGE_FSTYPESOtavio Salvador2016-04-191-2/+2
| | | | | | | | | The 'ext4' filesystem is automatically included as dependency of the SDCard image, so we can avoid this duplication in the IMAGE_FSTYPES variable. Change-Id: I235e2478845a4e394bbacd42d2e6e8170d1d4ce0 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* gst1.0-fsl-plugin: Upgrade to version 4.0.7Yuqing Zhu2016-04-191-3/+3
| | | | | | | | | | | | | --Upgrade gst1.0-fsl-plugin to version 4.0.7 released in 3.14.38-6UL_ga and 3.14.38-6QP_ga releases. --Add gstreamer-plugins-bad as one of the dependency. --Imxcompositor enhancement: 1. fix alpha blending capbility query issue of g2d. 2. add zorder feature. 3. add keep ratio feature. 4. find best output format by leverage the total complexity and picture quality. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* gstreamer1.0-plugins-bad: Install head file of gstaggregator and ↵Yuqing Zhu2016-04-192-0/+70
| | | | | | | | | | | | gstvideoaggregator Install the head file of gstaggregator and gstvideoaggregator. So that we can use them outside of gstreamer-plugins-bad package. Add SoC family and package arch. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* Move mxs-base.inc contents to imx-base.incOtavio Salvador2016-04-194-45/+13
| | | | | | | | | | | | | | The consolidation of all i.MX related base settings allows a more global view of the settings in place. One of the reasons for this patch is the fragmentation caused by i.MX23 and i.MX28 SoCs using mxs-base.inc. The changes needed to get i.MX23 and i.MX28 SoCs working have been included in imx-base.inc file already and some values required rework to apply to specific SoC families to avoid regressions. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc, mxs-base.inc: Use ext4 filesystem for images as defaultOtavio Salvador2016-04-192-4/+4
| | | | | | | The ext4 is now the default for images in OpenEmbedded-Core, we now follow this change for all i.MX reference boards. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc, mxs-base.inc: Change default image to sdcard.gzOtavio Salvador2016-04-192-2/+2
| | | | | | | | | | Replace .sdcard image to sdcard.gz image as a default image type for all machines. The SDCard class has the feature of compress the generated .sdcard image. It can be used to ease the exchange of this image among developers or machines. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc, mxs-base.inc: Stop generating tar.bz2 image tarball by defaultOtavio Salvador2016-04-192-2/+2
| | | | | | | | | | The tar.bz2 is useful for people using NFS or generating the SD card image byhand, those can enable this in the board file or in the local.conf when needed. By default the SD card image should be the only image built as it is the most commonly used one for initial development. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs-base.inc: Consolidate IMAGE_FSTYPES definitionOtavio Salvador2016-04-193-6/+3
| | | | | | | | | | | | The default value for IMAGE_FSTYPES including SDCard class enable all machine to work out of the box using the .sdcard image. The removed duplication affected the following machines: - imx23evk - imx28evk Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* image_types_fsl.bbclass: Fix DeviceTree copy for FAT partitionOtavio Salvador2016-04-191-3/+3
| | | | | | | | | | The rootfs generation script now runs outside of the deploy directory so the code need to use the full path for the installed files. This fixes the rootfs generation process so the files are copied to the FAT partition, allowing the system to boot. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Daiane Angolini <daiane.angolini@freescale.com>
* kernel-module-imx-gpu-viv: Fix build against 3.14-based kernels - againOtavio Salvador2016-04-192-1/+36
| | | | | | | | | | | | | The build fail about the bus frequency header (linux/busfreq-imx6.h) not being found is caused by the mistaken check for the wrong kernel version. The regression has been introduced by d476c35 (kernel-module-imx-gpu-viv: Upgrade to 5.0.11.p7.1 for 3.14.38-6QP_ga release) which has been not properly tested. This patch fixes it, again, by adding back the removed patch. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* Enable Vivante kernel driver dynamic providerOtavio Salvador2016-04-193-2/+20
| | | | | | | | | | The linux-imx.inc based kernels now can dynamically provide the Vivante kernel driver and satisfy the runtime dependency added for the Vivante GPU user space libraries. The beauty of this solution is that it makes ease for 3rd party kernel to reuse the same infrastructure and use the external module easily. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* fsl-vivante-kernel-driver-handler.bbclass: Handle Vivante kernel driver providerOtavio Salvador2016-04-191-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | Enable the kernel to provide or not the Vivante kernel driver and dynamically set the proper providers per machine. The following options are supported: MACHINE_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT Machine does or does not have support for the Vivante kernel driver, options are: 0 - machine does not have Vivante GPU driver support 1 - machine has Vivante GPU driver support MACHINE_USES_VIVANTE_KERNEL_DRIVER_MODULE Machine uses the Vivante kernel driver as module, options are: 0 - enable the builtin kernel driver module 1 - enable the external kernel module Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* kernel-module-imx-gpu-viv: Upgrade to 5.0.11.p7.1 for 3.14.38-6QP_ga releaseNeena Busireddy2016-04-194-52/+174
| | | | | | | | | | | - Package name is changed to kernel-module-imx-gpu-viv. - Patch platform-Fix-kernel-version-check-for-3.14-based-ker.patch is no longer required as the fix has been applied upstream. - Upgrade to graphics version 5.0.11.p7.1 - Makefile patch will be included in next release. Signed-off-by: Neena Busireddy <neena.busireddy@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* adjust MACHINEOVERRIDES orderingTing Liu2016-04-197-7/+7
| | | | | | | | | | | | | | | | FILESPATH is in part built by using MACHINEOVERRIDES and the path is built working right to left. Use =. instead of .= to prepend (e6500-64b:qoriq-ppc) to (soc:board). Take t2080rdb-64b as example, change from: FILESOVERRIDES="powerpc64:t2:t2080:t2080rdb-64b:qoriq-ppc:e6500-64b:poky" MACHINEOVERRIDES="t2:t2080:t2080rdb-64b:qoriq-ppc:e6500-64b" To: FILESOVERRIDES="powerpc64:e6500-64b:qoriq-ppc:t2:t2080:t2080rdb-64b:poky" MACHINEOVERRIDES="e6500-64b:qoriq-ppc:t2:t2080:t2080rdb-64b" Signed-off-by: Ting Liu <ting.liu@freescale.com>
* udev-rules-qoriq: avoid conflict with udev-extraconfTing Liu2016-04-191-5/+0
| | | | | | | | udev-extraconf installs file mount.blacklist too. rpm/ndb bits should go into udev-extraconf recipes, otherwise there will be file conflict. Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* openssl-qoriq: Fix runtime providers so 'openssl' is not taken as providerOtavio Salvador2016-04-192-3/+11
| | | | | | | | | | | Fix the following parse error: ERROR: Multiple .bb files are due to be built which each provide openssl (.../meta-freescale/recipes-connectivity/openssl/openssl-qoriq_1.0.1i.bb /poky/meta/recipes-connectivity/openssl/openssl_1.0.2d.bb). This usually means one provides something the other doesn't and should. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* libfslvpuwrap: Upgrade to 1.0.61 versionYuqing Zhu2016-04-191-3/+3
| | | | | | | | | | | Upgrade to 1.0.61 version released in 3.14.38-6UL_ga and 3.14.38-6QP_ga releases. Update EULA file to the latest v8 June 2015. Enable resolution change for H.263 and VP8 Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-07-24 13:40:22 +0000