| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The U-Boot 2016.05 is close to release and it is time to upgrade. This
includes following changes on top of upcoming release, which are Yocto
Project related:
0fcd279 wandboard: Drop revision specific DeviceTree support
0ab586a mx6sabresd: Enable video interfaces in bootargs
5976978 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
91f4fa5 iMX6: Change mmcroot to use fixed mmc block index for USDHC
968d872 embestmx6boards: Change default bootenv configuration
3233072 mx6sabresd: Use LDO dtb file until LDO bypass support is added
df5f668 mx6slevk: Use LDO dtb file until LDO bypass support is added
The following changes are included here, and queued for U-Boot 2016.07
release:
a858d98 ARM: mx6: Enable MMC and SATA extfs boot support
70f4d22 SPL: Add CONFIG_SPL_ABORT_ON_RAW_IMAGE
5054e50 SPL: Let spl_parse_image_header() return value
bf9c724 imx: imx-common: print i.MX 7 SoC names consistently
dd6d9db imx: imx7d: fix ahb clock mux 1
24f4bb6 imx: iomux-v3: fix UART input selects
83609b3 ARM: mx6: Enable STDIO deregistering on Novena
0fc4e56 imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5
ffae8c1 imx: tools: imximage: fix CLR bit command
Change-Id: I82aba59b47dfe530a6a1243f3227b914b973205f
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
Includes support for i.MX 6UltraLite T1.1 silicon.
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
Mistake in usptreaming 4.1.15-1.0.0 - should use SRC_URI instead of UBOOT_SRC
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This brings following backports/fixes:
1e82446 mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
e578035 mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation
adc86d5 mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file
83195c2 warp7: Pass the UART base definition
87a2283 mx6sabresd: Remove unneeded enable_lvds() function
8f1927e arm: mxs: Update MX28EVK config
db8b958 mx6sabresd: Use VESA 1024x768 timings
49185d3 mx27: 16-bit wide watchdog registers
cfc4a96 mx6sabre_common: Fix U-Boot corruption after 'saveenv'
d955806 arm: mx5: Enable NAND TrimFFS on M53EVK
0aea495 imx: print ARM clock for clocks command
1a1ac16 imx: mx6ul configure the PMIC_STBY_REQ pin as open drain
6f8ee92 imx: mx6ul: skip setting ahb rate
60b774d imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask
fe3704b Revert conversion for config_distro_bootcmd.h
8a68957 Revert "warp7: Add initial support"
Change-Id: I7a04b21f4ec9aac0a58adb1233d208b1ae2c3258
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates the fork for the 2016.03 release. Currently following
patches are applied on top of it:
fd6b196 warp7: Add initial support
f9dc5fe wandboard: Drop revision specific DeviceTree support
b3e771e mx6sabresd: Enable video interfaces in bootargs
e0a65b1 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
af0e438 iMX6: Change mmcroot to use fixed mmc block index for USDHC
36a641b embestmx6boards: Change default bootenv configuration
f97660e mx6sabresd: Use LDO dtb file until LDO bypass support is added
4064b09 mx6slevk: Use LDO dtb file until LDO bypass support is added
f854376 imx: mx7d: move MX7D to Kconfig entry
8a29233 imx: mx6sx: move MX6SX to Kconfig entry
d85319f arm: mx6: Add CCV xPress board support
fe7917e arm: mx6: Add UART8 base address for i.MX6UL
8730cc5 arm: imx6: Switch DDR3 calibration to wait_for_bit()
91c85e8 warp7: Add initial support
ca3306a mx7_common: Put early/late init configs into board file
1dfebcc mx7: Distinguish between dual and solo versions
dfcf27d mx7dsabresd: Define serial port locally
95817e0 mx7_common: Remove unexisting options
78eb121 arm: imx: Add support for GE Bx50v3 boards
Change-Id: I0e7ddd021fd87ffe8a5ad6916fd1eb7a3243b21b
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This runs:
sed -e 's:\(\.getVar([^,()]*\)):\1, False):g' -i `grep -ril getVar *`
on the layer to update the getVar usages without an expand parameter,
This ensures the layer continues to work with bitbake master.
There is no functionality change although some of these sites
may benefit from expand=True.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
Consolidate GA support i.MX 6Q/QP/D/S/SL/UL and 7Dual
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates the fork for the 2016.01 release. Currently following
patches are applied on top of it:
5da7953 wandboard: Drop revision specific DeviceTree support
3a636ab mx6sabresd: Enable video interfaces in bootargs
bec0ad3 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
fad3922 iMX6: Change mmcroot to use fixed mmc block index for USDHC
3c73816 embestmx6boards: Change default bootenv configuration
90bac9b mx6sabresd: Use LDO dtb file until LDO bypass support is added
885c473 mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
New commit imported:
eb3d4fc powerpc/mpc85xx: fix disable port for FMAN erratum A007273
63dfac1 powerpc/mpc85xx: restrict platform for FMAN erratum A007273
54e5fde powerpc/mpc85xx: Add workaround for FMAN erratum A007273
61ac6ba drivers:usb:fsl: Add affected SOCs for USB Erratum A007792
ced4086 fsl/ddr: updated ddr errata-A008378 for arm and power SoCs
17f724f fsl/errata: move fsl_errata.h to common directory
6acff65 arm: ls102x: add get_svr and IS_SVR_REV helper
0caf24c arm: ls102xa: Set fdt_high and initrd_high to the value of 0xffffffff
263a323 powerpc: e6500: Lock/unlock L2 cache instead of L1 as init_ram
f28fd70 powerpc: configs: Fix init_ram physical address for several boards
46be0a4 ls102xa: fdt: Disable IFC in SD boot for QSPI
f1ca68a ls102xa: etsec: Use proper settings for BE BDs
e0712fe mpc85xx/u-boot*.lds: remove _GLOBAL_OFFSET_TABLE_ definition
a04b8b3 mmc: fsl_esdhc: fix mmc read/write error on T4160/T4080
23a735b arm: ls1021a: Fix the patch check warnings for the previous commit
5a42d5d SECURE_BOOT: Correct reading of ITS bit
f6310eb arm: ls1021a: Add QSPI or IFC support in SD boot
ab2db1a arm: ls102xa: fix patch check issue.
7611d2c Merge pull request #40 in SDK/u-boot-devel from ~B29983/u-boot-devel-tyt:feature/QUBOOT-1181-the-u-boot-deepsleep-resume-time to master
d406c4f arm: ls102xa: enable all the snoop signal for masters.
1686b84 Merge pull request #38 in SDK/u-boot-devel from ~B46683/u-boot-devel:bugfix/QUBOOT-1173-ls1021atwr-sd-boot-don-t-support to master
0258a33 Merge pull request #37 in SDK/u-boot-devel from ~B18965/my-u-boot-devel:master to master
dfc49e9 arm: ls1021atwr: optimize the deep sleep latency
2023326 Merge pull request #34 in SDK/u-boot-devel from ~B40530/u-boot-devel:feature/QUBOOT-789-sd-boot-on-t4-rdb to master
3a8f547 Merge pull request #35 in SDK/u-boot-devel from ~B47093/u-boot-devel-sdhc:feature/QLINUX-3755-support-the-uhs-speed-mode-for to master
e4957df Merge pull request #31 in SDK/u-boot-devel from DNNPI/ls1-uboot:feature/LS1-for-SDK1.9 to master
774b080 configs: ls1021atwr: Enable ID EEPROM for SD boot
95a9abb arm: mmu: Add missing volatile for reading SCTLR register
c9a7868 mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC legacy card
3fe5a18 Merge pull request #27 in SDK/u-boot-devel from ~B45475/u-boot-devel-fork:feature/QUBOOT-1057-support-qe-tdm-on-t1040rdbd4 to master
767a4ad powerpc/t1040qds: enable peripheral clock for eSDHC
0867fed powerpc/t1040qds: enable adapter card type identification support
26d6853 mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5
acd4c74 powerpc/t4rdb: Add SD boot support for T4240RDB board
b773c94 configs: ls1021atwr: Disable DSPI2 with NOR boot
98bf337 mtd: sf: Add support AT26DF081A chip
91bdf34 dm: dts: ls1021a-twr: Enable DSPI2 on LS1021ATWR
7289cb9 configs: ls1021atwr: Enable DSPI for LS1021ATWR
870af21 t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm
300674e powerpc/t1023rdb: change default core frequency to 1200MHz
45f88eb powerpc/t1023rdb: eMMC boot without external SD card
aee4875 board/t1023rdb: add support for T1023RDB RevC
2c86026 ls1021atwr: sdboot: change serdes 0x20 to 0x30
8d38d25 LS102XA:workaround:disable priorities within DDR
2621445 arm: ls1021a: allow OCRAM access permission as R/W in SPL
10bc2b0 crypto/fsl: fix "era" property value on LE platforms
6d5733d arm: ls102xa: enable snooping for CAAM transactions
d3e6f11 Revert "Enable snooping on transactions from CAAM block"
a5dc0f7 arm: ls1021a: Ensure LS1021 ARM Generic Timer CompareValue Set 64-bit
0669b57 LS102XA: Workaround: DDR require a register write
449ab6a ls102xa: Enable snoop and DVM message requests.
6ae8810 Revert "arm: ls102xa: workaround for cache coherency problem"
617f1fd Revert "sf: Add support for flag status register on Micron chips"
18bd7bb arm: ls102xa: Add LE mode support for audio IPs on Rev2.0 silicon
80a22d8 QE: modify the address of qe ucode
784f7f2 arm: ls1021atwr: program the regulator for deep sleep
8971e50 ls1021atwr: added deep sleep support in uboot
9f692ae ls102xa: etsec: Enable Tx Data and TxBD snooping
79da560 arm/ls102xa:Add support of conditional workaround implementation as per SoC ver
b6876d0 arm: ls102xa: Adjust the load address of U-Boot for NOR boot
Remove the useless Fix-the-depend-race-issue.patch.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
external-fsl should be standalone. Add the changes in its sperated layers.
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This includes following backported changes from 2016.01 development tree:
1b6aee7 mx7dsabresd: add secure boot support
54021ea imx: hab: add mx7 secure boot support
eea967b imx: hab: use read_fuse for secure boot settings
cca95ea arm: imx: add secure boot fuse details for imx7 SoC
5ef219e arm: imx: add secure boot fuse details for imx6 SoC
b2842cc imx: hab: add secure boot fuse details
31454f2 imx: hab: rework unified rom section for mx7
9ac3e4b imx: hab: use unified rom section for mx6sx and mx6ul
20235de imx: hab: rework secure boot support for imx6
8574461 imx: cpu: move common chip revision id's
a0c37ef imx: mx6sabresd: add i.MX6DQP Sabresd support
93bcc5f imx35, flea3: add FIT image support
10ca202 ts4800: add CONFIG_OF_LIBFDT
4198580 arm, imx6, aristainetos2: set gpr register after reset
e06ab75 arm, imx: add some gpr register defines
8af784c driver: misc: add MXC_OCOTP Kconfig entry
a022163 imx-common: timer: clean up code
Besides those, it also include:
4238786 cgtqmx6eval: Fix SPL support
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This includes the Congatec QMX6 SPL support which is targetting
inclusion for U-Boot 2016.01 release. The following patches are
included:
23575d2 cgtqmx6eval: Add DFU support
112dfb1 iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad()
bf2ca16 cgtqmx6eval: Add SPL support
3bce451 cgtqmx6eval: Add fastboot support
77b786a cgtqmx6eval: Use SPI NOR to store the environment
f6bc396 cgtqmx6eval: Add SPI NOR flash support
540baa3 spi: Add SPI NOR protection mechanism
6e057b9 spi: sf_ops: Add SPI protection mechanism from the kernel
3f150e4 powerpc: Remove __ilog2_u64 and ffs4 from bitops
2feb00c compat: Remove is_power_of_2() definition
254550e nios2: Use the generic bitops headers
7611cdc nds32: Use the generic bitops headers
f9bfea4 openrisc: Use the generic bitops headers
d2f21eb sparc: Use the generic bitops headers
fde093e sandbox: Use the generic bitops headers
ef582a7 sh: bitops: Use the generic bitops headers
d068eae blackfin: bitops: Use the generic bitops headers
37d32df m68k: bitops: Use the generic bitops headers
902775c4 x86: bitops: Use the generic bitops headers
6ab6bf2 ARM: bitops: Use the generic bitops headers
8324309 include: Add generic bitops headers
5054c77 include: Add log2 header from the kernel
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
This merges the v2015.10 final changes onto the FSLC fork, bringing
the fixes done on top of the rc5 release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
Those patch files were left orphan when upgrading the linux-imx and
u-boot-imx recipes, becoming unused. The removal of them cause no harm
and helps to keep the metadata clean.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update the U-Boot fork to a 2015.10-rc5 based version. This brings
several fixes for i.MX and Vybrid based systems. Mainly:
cf04ad3 arm: vf610twr: improve memory layout
d45fd01 colibri_vf: Fix bstlen field
e24bb2b mtd: nand: vf610_nfc: resync with upstream Linux version
f861f51 ls102xa: Fix reset hang
f532727 imx_watchdog: Add a header file for watchdog registers
040ef8f pcm052: fix MTD partitioning
61903b7 imximage: fix commands other than write_data
835c30e imximage: header.length of 4 is valid
Change-Id: Ifdb607d9a94ef594f3fe37d2b6388dc9a8268106
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
This updates the fork based on upcoming 2015.10 release. This is
currently based on 2015.10-rc3 tag and offers a very solid release for
start the tests for Yocto Project 2.0 release.
Change-Id: I1d35409a9806a96f8dd538e2b8c2a3520e9104ba
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
QuadPlus and Ultralite were each standalone releases so keep
baranches and commits specific to each standalone release.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
Use the following machine specific variables which are defined in machine
conf file:
* UBOOT_SOURCE_NAND
* UBOOT_SOURCE_SPI
* UBOOT_SOURCE_SD
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
configs are built
The the following build error:
./poky/p4080ds/tmp/work/p4080ds-poky-linux/u-boot-qoriq/2015.01+fslgit-r0/temp/run.do_deploy.16948: line 172: P4080DS_config: command not found
UBOOT_MACHINES= P4080DS_config P4080DS_SECURE_BOOT_config P4080DS_SDCARD_config P4080DS_SPIFLASH_config
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
* update u-boot-qoriq recipe to support QorIQ ARM and QorIQ PPC
* remove u-boot-ls1 recipe which is replaced by u-boot-qoriq
* move PREFERRED_PROVIDER_u-boot to qoriq-base.inc
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Acked-by: Daiane Angolini <daiane.angolini@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This upgrades the U-Boot 2015.07 fork to include following backports:
3f0c535 udoo: Remove SPL fat support
87c4294 arm: mxs: make inline function compatible for GCC 5
a3c103e udoo: Switch to SPL support
963982d cgtqmx6eval: Use standard boot script
70bbfc1 cgtqmx6eval: Align DCD settings with Congatec's U-boot
a17e383 cgtqmx6eval: Add SATA support
825ced0 cgtqmx6eval: Add splash screen support
26a3d35 cgtqmx6eval: Add USB support
7a902c7 cgtqmx6eval: Add PMIC support
9991641 cgtqmx6eval: Add thermal support
1702fa7 cgtqmx6eval: Add ESDHC3 support
4a01796 cgtqmx6eval: Fit into single lines
3b8bc2d cgtqmx6eval: Improve the error handling
03d8850 cgtqmx6eval: Staticize when possible
d199d1f cgtqmx6eval: Use the default CONFIG_SYS_PBSIZE
c3bb8cc cgtqmx6eval: Use default prompt
389d672 mmc:fsl_esdhc invalidate dcache before read
2aa590e warp: Add MAX77696 support
b446a29 power: pmic: Add support for MAX77696 PMIC
0c610df thermal: Fix comments
7869cf1 imx: imximage: add new CHECK/CLR BIT command
f18b011 arm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoM
7e23759 mx6sabresd: Use 'int' for return values
c5fb677 mx6sxsabresd: Use 'int' for return values
b713ff9 builderthread.py: Keep 'SPL'
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
Upgrade to 2015.04 version and add i.MX 6UltraLite.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
Update to latest fixes in 3.14.38-6QP_beta which adds
support for i.MX 7Dual and i.MX 6QuadPlus boot configurations.
Bug fixes for i.MX 6 boards including ARM errata fixes.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix the below build issues:
CC drivers/crypto/fsl/sec.o
LD arch/powerpc/cpu/mpc8xxx/built-in.o
arch/powerpc/cpu/mpc8xxx/fdt.o: In function `ld_le16':
../arch/powerpc/include/asm/byteorder.h:12: multiple definition of `ld_le16'
The problem is the change of the default C standard from gnu89 to gnu11
which changes the semantics of 'inline'. The issue is described in the
Porting guide at https://gcc.gnu.org/gcc-5/porting_to.html. Adding the
'-fgnu89-inline' option fixes the issue.
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
u-boot-qoriq was upgraded to 2015.01 now. Use _append to not override
the PV in recipe.
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
This commit is just a rename of all contents of meta-fsl-ppc
subdirectory to this layer's root, merging the contents of common
files, subsequent changes are based on top of that.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This upgrades the FSL Community fork to a 2015.07-based one. The
following patches are applied on top of the original source code:
31851bd wandboard: Drop revision specific DeviceTree support
a31d74b mx6sabresd: Enable video interfaces in bootargs
9aaf17f Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
05c69ef wandboard: Changed mmcroot variable so kernel 3.10.31 boots
3e86dfb iMX6: Change mmcroot to use fixed mmc block index for USDHC
44ffc6d mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
7767edb embestmx6boards: Change default bootenv configuration
bebd6c7 mx6sabresd: Use LDO dtb file until LDO bypass support is added
8a82d9d mx6slevk: Use LDO dtb file until LDO bypass support is added
6f3f04e thermal: imx_thermal: fix busywait if IMX6 temp <0C
a978050 tools: mkimage: fix imximage header size
8788cb7 i2c: fix vf610 support
a7fd9dd net: fec_mxc: remove useless struct nbuf
823ba31 iMX: adding parsing to hab_status command
0210211 imx: mx6 add i2c4 clock support for i.MX6SX
8e45722 imx: mx6 remove duplicated enable_cspi_clock
bf639dd imx6: standardise OCOTP and fuse config to mx6_common
4d4c88c thermal:imx_thermal: enter busywait cooling loop when over max CPU temp
c23cd60 mx53loco: Use generic 'load' command instead of 'fatload'
Change-Id: I7215c00328e6110fb40effa0514a28d076bbedf0
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The i.MX31 and i.MX35 has been barely used and without much community
coverage since its inclusion making them untested boards.
There is no reason to keep the support for those SoCs in the BSP layer
as those are virtually not tested and unkown to be working or not.
The metadata related to the i.MX3 SoC family has been removed in this
commit so if someone ever wants to bring it back it is easy to find
out all the necessary changes.
Change-Id: I808bf7d1cfa97eb7d444fba711a93b1e074d5f4d
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
Builds for 'nand' booting were failing because of an incorrect path
during compilation.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The meta-fsl-arm is going to be used as the base for this layer. It
contains a clean history and allowing a more granullar set of changes.
This commit is just a rename of all contents of meta-fsl-arm
subdirectory to this layer's root, subsequent changes are based on top
of that.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|