summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* linux-fslc-imx: Bump revision to 77f6154Otavio Salvador2016-07-142-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This merges the 4.1.15-1.2.0 GA release onto the Linux FSLC fork. It includes following changes: 77f6154 MLK-12948 ARM: dts: imx7d-sdb: change the hardware reset gpio for mipi dsi 042fabd MLK-12946 media: pxp-v4l2: correct the 32 bpp pixel format passed to pxp 801b839 mmc: mmc: fix switch timeout issue caused by jiffies precision 38ed99e mmc: core: fix __mmc_switch timeout caused by preempt c6c8f8d MLK-12934-2 mmc: sdhci-esdhc-imx: do not touch other bit when config DTOCV 6905ad8 MLK-12934-1 mmc: sdhci-esdhc-imx: correct the max timeout count a7f1dc6 MLK-12944 fix makefile miss imx7d-12x12-lpddr3-arm2-pcie.dtb 470f930 MLK-12935 ARM: imx: switch system counter clock to 32K in suspend d86edca MLK-12902: usdhc: Revert "MLK-11685-5 mmc: sdhci-esdhc-imx: no need busfreq for imx6qdl" fc72198 MLK-12899-2 video: mipi_dsi_samsung: add panel 'TFT3P5581' driver. e01451b MLK-12899-1 ARM: dts: imx7d-sdb: add dts support for panel 'TFT3P5581'. 9a38200 MLK-12901-3 video: mipi_dsi_samsung: alwasy use video mode to transfer data and cmds. c88b735 MLK-12901-2 video: mipi_dsi_samsung: add 10msec delay after all the pkt write operation. f154b5e MLK-12901-1 video: mipi_dsi_samsung: correct the hardware reset calling position. 30b8226 MLK_12886-2 video: mxsfb: handle the assert gpio in driver to support deferred probe f0fdb61 MLK-12886-1 ARM: dts: imx7d-sdb: the assert gpio for lcdif should be active low c1d7c35 MLK-12898: ov5640 mipi: Add more delay to wait sensor stable bbe0e5a MLK-12880 arm: dts: imx7d: correct the PAD_GPIO1_IO01 pin ctrl setting c29dda8 MLK-12876: mipi csi: Remove regulator enable code when driver probe d95d2e8 MLK-12860-4 usb: chipidea: imx: add HSIC support for imx7d abc9926 MLK-12860-3 ARM: imx: gpcv2: add reg_1p2's notifier 85d2f3f MLK-12860-2 ARM: dts: add imx7d 12x12 ARM2 ddr3 board dts b104675 MLK-12860-1 ARM: dts: imx7d: add vcc-supply at gpc node e28ae27 MLK-12861-2 ARM: imx: enable necessary clock for RDC resume on i.mx7d 02a2e8d MLK-12861-1 ARM: imx: support runtime clock management on i.mx7d when M4 is enabled 059449a MGS-1851 [#2332] fix the integer id resource leak 7b3c314 MLK-12795 pinctrl: imx: fix initialization of imx_pinctrl_desc 1c60143 MLK-12781 ARM: dts: imx7d-12x12-lpddr3-arm2: add pinctrl for usb vbus aca1386 MLK-12695 dma: pxp-v2: fixing the mismatch calls of pm_runtime suspend/resume 3455774 MLK-12669-2 dma: pxp-v3: add 'ipg' and 'axi' clocks 9e04de3 MLK-12699-1 ARM: imx7d: clk: add two clocks definition for pxp 2b25e7d MLK-12622: mtd: gpmi: fix the issue in legacy bch support c479a94 MLK-12602: Documentation: gpmi-nand: legacy bch geometry option for NAND 5102a01 MLK-12601: mtd: gpmi: provide the option to use legacy bch geometry 30c1b15 MLK-12421 usb: chipidea: fix build warning if disable CONFIG_USB_CHIPIDEA_HOST a49b611 MLK-12509-3 video: mipi_dsi_samsung: add build support for TFT3P5079E panel. 0038221 MLK-12509-2 video: mipi_dsi_samsung: add 'TFT3P5079E' panel driver. e3a5bdf MLK-12509-1 video: mipi_dsi_samsung: create a new dts for mipi dsi. 83f0dd3 MLK-12449: mtd: gpmi: fix integer overflow issue 4198b7b MLK-12448: mtd: gpmi: fix nand double free issue 8b38103 MLK-12371: ARM: imx: suspend-imx7: correct HW_ANADIG_SNVS_MISC_CTRL set 5db98a4 MLK-12420 fix potential head list corruption. e6ea96a MLK-12731-2 ARM: dts: Makefile: add dts entry for imx6q-arm2-hsic b1e060d MLK-12731-1 usb: chipidea: imx: add missing HSIC initialization for imx6qdl/sl 3268392 MLK-12688-02: arm dts: Add csis-clk-settle property 9504f74 MLK-12688-01: mipi csi: Add clk_settle setting 517f750 MLK-12432-03: arm: dts: Replace ov5647 mipi sensor with ov5640 488fd31 MLK-12432-02: capture: Add support for mipi input c02abe7 MLK-12432-01: ov5640 mipi: support more platform and reduce support mode 9f0881f MLK-12763 ARM: imx7d: iomux: correct uart input sel option value 07c9f26 MLK-12765 ARM: imx: make sure DLL is locked on i.MX7D a38a53d MLK-12748-3 ARM: imx: adjust imx7d lpddr3 retention exit flow adfc24c MLK-12748-2 ARM: imx: remove IOMUXC GPR setting for i.mx7d TO1.2 07184c5 MLK-12748-1 ARM: dts: imx7d: correct usdhc1 cd pin setting 8ad5988 MLK-12761 ARM: imx: add mu as wakeup source for i.mx7d cf0a95b MLK-11262-5: ARM: imx: Change A7 MU ready timing Change-Id: Id25f069f639654a104bcd17c5b354335b95e7d64 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-fslc-imx: Fix DESCRIPTION to mention 4.1.15-1.0.0 GA as basedOtavio Salvador2016-07-112-2/+2
| | | | | | | | | | The base kernel has been updated for the 4.1.15-1.0.0 GA but the DESCRIPTION has not been updated when updating the recipes, this fixes that so the DESCRIPTION in the generated packages and release notes are right. Change-Id: Id7539aa65f5466f0bd285766931d4648b0445e44 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* gstreamer1.0-plugins-bad: Remove PACKAGE_ARCH override for i.MX7 and i.MX6ULOtavio Salvador2016-07-111-2/+0
| | | | | | | | | The CFLAGS and PACKAGECONFIG changes are applied just for i.MX6 Q, DL, SX and SL so we can remove the PACKAGE_ARCH override for the i.MX7 and i.MX6UL as those are unaffected. Change-Id: Ice33fd3a12566875f9ec2559d0a044f38916d244 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* gstreamer1.0-plugins-bad: remove patchMax Krummenacher2016-07-112-67/+0
| | | | | | | | | | | | | | | | With the upgrade to gstremaer 1.8.x this patch does no longer apply. Upstream changed to install the headers required, so the patch is also no longer needed: https://cgit.freedesktop.org/gstreamer/gst-plugins-bad/commit?h=1.8&id=c87a7e266732ab9a0bd0e5a5c104b06d0f1a2072 Updated to 1.8 in oe-core: http://cgit.openembedded.org/openembedded-core/commit/meta/recipes-multimedia/gstreamer?id=6a326f2b37b0b49e1144428becda32400498c024 or the poky git: http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/meta/recipes-multimedia/gstreamer?id=79ca8d031e5a706f00d5c97ba23b496e6d700b7e Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Upgrade to 2016.07-based forkOtavio Salvador2016-07-063-9/+9
| | | | | | | | This upgrades for the upcoming 2016.07 release. This is based on top of 2016.07-rc3 plus i.MX pending patches. Change-Id: I6abdde5f7ada253f62c3adc884a497888a609db8 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx7dsabresd: Fix the boot of a NXP kernelOtavio Salvador2016-07-041-1/+1
| | | | | | | | | | | | | | | | | | | | Booting a NXP kernel with mainline U-boot leads to the following kernel crash: ,---- | caam: probe of 30900000.caam failed with error -11 | Unable to handle kernel NULL pointer dereference at virtual address 00000004 | pgd = 80004000 | [00000004] *pgd=00000000 | Internal error: Oops: 805 [#1] PREEMPT SMP ARM `---- This happens because NXP kernel expects MX7 to boot in secure mode, so introduce mx7dsabresd_secure_defconfig that selects CONFIG_MX7_SEC and allows booting a NXP provided kernel successfully. Change-Id: Ic05912c1328c75e8e25c89e7543b67c8c214e20d Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-fslc-imx: Bump to revision 960f493Otavio Salvador2016-07-041-1/+1
| | | | | | | | | This merges the 4.1.26 stable release and include following change: 960f493 of: Allow NXP 4.1 kernel to allocate memory on 2GiB RAM boards Change-Id: Iacc788ccc36920f9ce7292ece5ce2e9ac210beb2 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-fslc-imx: Disable Vivante GPU supportOtavio Salvador2016-07-041-1/+0
| | | | | | | | | | | | | The Vivante GPU is used as kernel module for all i.MX6, by default, so the defconfig should not enable it as other SoC (as i.MX6UL and i.MX7D) uses the same defconfig and does not have the Vivante GPU. This avoids the built-in driver build for other SoCs, thus fixing a build error with GCC 6, which is hidden when using the external module. Change-Id: Ib12cfe494d75b6407eaf72c386094cc03606c7f8 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* fsl-vivante-kernel-driver-handler.bbclass: Allow build for non-i.MX6Otavio Salvador2016-07-041-2/+2
| | | | | | | | | When building for non-i.MX6, we ought to assume the SoC does not has Vivante GPU at all, or the build will fail. This fixes the build of linux-fslc-imx-rt for i.MX7D as it does not have a Vivante GPU. Change-Id: Ic8fc4808880aca381e88f6e1b6c52416bb4520c4 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Use linux-fslc-imx for i.MX6ULOtavio Salvador2016-07-041-1/+1
| | | | | Change-Id: I5e075f683e6f39bc2f2e1058eacdbef371a37abf Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Use linux-fslc-imx for i.MX7Otavio Salvador2016-07-041-0/+1
| | | | | Change-Id: I6ef0574f3be9a3afd76ed4fbf36dbefab1e207ad Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Bump revision to 3106462Otavio Salvador2016-06-302-2/+2
| | | | | | | | | | This includes following fixes: 3106462 mx7dsabresd: Fix the boot of a NXP kernel 401468c mx7: Place MX7_SEC option in Kconfig Change-Id: If54a89f104a6d340df911c43ba4b22f526aa6c65 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* libimxvpuapi: use libdir from cross environmentMax Krummenacher2016-06-271-0/+2
| | | | | | | | | | | | | | | Pass $libdir to 'waf configure' to prevent using the build hosts libdir. Fixes: WARNING: libimxvpuapi-0.10.2-r0 do_package: QA Issue: libimxvpuapi: Files/directories were installed but not shipped in any package: /usr/lib64/libimxvpuapi.so /usr/lib64/libimxvpuapi.so.0 /usr/lib64/libimxvpuapi.so.0.10.2 /usr/lib64/pkgconfig /usr/lib64/pkgconfig/libimxvpuapi.pc Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base: Add MACHINE_SOCARCH_FILTER for mx6ul and mx7dLauren Post2016-06-231-0/+2
| | | | | | | Add missing MACHINE_SOCARCH_FILTER for mx6ul and 7d to include imx multimedia Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base: Specific 7d for MACHINE_SOCARCH_SUFFIXLauren Post2016-06-231-1/+1
| | | | | | | Future mx7 will need separate SOCARCH_SUFFIX so don't apply to all mx7 Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base: Remove XSERVER_DRIVER_mx6ul - default case will workLauren Post2016-06-231-1/+0
| | | | | | | mx6ul is not mx6 so default case applies. This is redundant Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* weston: Fix weston window manager for i.MX 6UltraLiteTom Hochstein2016-06-161-0/+7
| | | | | | | | | | | The weston window manager failed to start on i.MX 6UltraLite EVK. 6UL has no GPU, so we need to use pixman. Fixed by removing EGL/GLES support, and by configuring to use Framebuffer backend as native. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* fsl-kernel-localversion: Configure kernel in a separate taskAdrian Dudau2016-06-161-1/+2
| | | | | | | | | | | As it is implemented right now this class overwrites the .config file making it impossible for any other layer to configure the kernel in a .bbappend to the kernel recipe. By doing it in a separate task before do_configure we ensure that recipe .bbappends can make further kernel configurations in do_configure_prepend. Signed-off-by: Adrian Dudau <adrian.dudau@enea.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot: fix build error under gcc6Zhenhua Luo2016-06-022-1/+94
| | | | | | | | | Fix the following build error under gcc6: | ../include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory | #include gcc_header(__GNUC__) Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* qemu-fsl: disable do_compile_ptest_base executionZhenhua Luo2016-06-021-0/+2
| | | | | | | This qemu doesn't support ptest, do disable do_compile_ptest_base. Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* qemu-fsl: remove unsupported configure optionsZhenhua Luo2016-06-021-0/+7
| | | | | | | | | | | | | Fix the following errors: | DEBUG: Executing shell function do_configure | ERROR: unknown option --disable-static | ERROR: unknown option --disable-gnutls | ERROR: unknown option --disable-gcrypt | ERROR: unknown option --disable-nettle | ERROR: unknown option --disable-smartcard Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-ls1: fix build issue under gcc6Zhenhua Luo2016-06-022-0/+93
| | | | | Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* asf: correct the branchZhenhua Luo2016-06-021-1/+1
| | | | | | | | | Fix the following build error: | asf-git-r0 do_fetch: Fetcher failure: Unable to find revision | 62ba10ab6bab8f8f53934e4bb55b5a552bf3fd6b in branch master even from upstream Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-ls1: exclude DATETIME from vardepsexclude of ZIMAGE_BASE_NAME to fix ↵Zhenhua Luo2016-05-311-0/+1
| | | | | | | | | | | taskhash mismatch issue The siggen.py checks the task hash, DATETIME dependency causes Taskhash mismatch error, exxclude DATETIME variable from vardepsexclude of ZIMAGE_BASE_NAME. Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* kernel-module-imx-gpu-viv: Upgrade to 5.0.11.p8.4Tom Hochstein2016-05-301-1/+1
| | | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* xf86-video-imxfb-vivante: Upgrade to 5.0.11.p8.4Lauren Post2016-05-301-2/+2
| | | | | | | | Fix to fallback to software path when transform is not supported Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-gpu-viv: Upgrade to p8.4Lauren Post2016-05-301-2/+2
| | | | | | | | | | Changes in this release are listed here: http://git.freescale.com/git/cgit.cgi/imx/fsl-arm-yocto-bsp.git/tree/GraphicsChangeLog?h=imx-3.14.52-1.1.0_ga Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* weston: Fix g2d compositor startup failureTom Hochstein2016-05-302-0/+32
| | | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* core-image-weston: Don't install clutter-1.0-examples for i.MX6SLTom Hochstein2016-05-301-0/+3
| | | | | | | | Remove clutter-1.0-examples in case we are generating an image for the i.MX6SL SoC family as it does not provide GPU 3D support. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* weston: Rebase Vivante patch for Yocto 2.2Tom Hochstein2016-05-231-52/+40
| | | | | | Change-Id: Ideb91234d9aba465968f278955e74c13248cc1c7 Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* core-image-weston: Remove now that Wayland backend is preferredOtavio Salvador2016-05-231-4/+0
| | | | | | | | Now that Wayland backend is preferred over X11, we can use this image with X11 DISTRO_FEATURE enabled. Change-Id: Ief201823644b5982b6c4b64c1234c5d65cca15e4 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-gpu-viv: Ensure the Wayland backend provides Xorg driverOtavio Salvador2016-05-231-0/+1
| | | | | | | | | For the XWayland use, we ought to avoid installing the Xorg Vivante driver so we make the Wayland backend to provide it so the runtime dependency is satisfied. Change-Id: Id92afcb8ad611db8b4b26a952bbf93ad86a46924 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-gpu-viv: Prefer using Wayland over X11 backendOtavio Salvador2016-05-231-13/+14
| | | | | | | | The Wayland backend ought to be used over the X11, if both DISTRO_FEATURES are enabled. Change-Id: I64d793a9a46d4d9a8a02caf210a259123a8bc56e Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* kernel-module-imx-gpu-viv: Fix gcc 6 build error -Werror=misleading-indentationTom Hochstein2016-05-232-1/+32
| | | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* chromium: Update bbappend to version 48.0.2548.0Carlos Rafael Giani2016-05-232-7/+4
| | | | | Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision 6e4d8c5Fabio Estevam2016-05-172-2/+2
| | | | | | | | This includes the following commit from U-Boot fslc: 6e4d8c5 pico-imx6ul: Select CONFIG_HUSH_PARSER option Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision 158a5196Otavio Salvador2016-05-172-2/+2
| | | | | | | This merges the changes of final 2016.05 release on top of FSLC fork. Change-Id: I99179beec9a75aead1bbe27de689005b9d129490 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base: Improve sstate signature handling for BSP packagesOtavio Salvador2016-05-161-0/+8
| | | | | | | | | | | | | | | | | There are BSP packages which can have some dependencies removed from the sstate signature; this is beneficial as it reduces a lot the build time and increases the binaries reuse. Following changes are done: - Mark kernel-module-imx-gpu-viv and safe for imx-gpu-viv - Mark imx-vpu as safe for libimxvpuapi - Mark imx-vpu as safe for imx-vpuwrap - Mark imx-vpu as safe for imx-codec - Mark imx-vpu as safe for imx-test Change-Id: I1625d1e4d1cda529069c2d88218c4c84844ee4a8 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Fix PACKAGE_ARCH attribution for multimedia librariesOtavio Salvador2016-05-161-2/+2
| | | | | | | | | | | | | The multimedia libraries offer the APIs for the application and as consequence every user of those libraries should be set as MACHINE_SOCARCH. This fixes the setting for: - imx-vpu - libimxvpuapi Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-vpu: Set PACKAGE_ARCH to MACHINE_ARCHOtavio Salvador2016-05-161-0/+2
| | | | | | | | | The imx-vpu is a machine specific package, as it depends on the kernel for build. We are going to change the PACKAGE_ARCH of it to be MACHINE_SOCARCH as the interface provided by it is stable thus not requring that the library users to be rebuild. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* opencv: Remove bbappend to block 3.1 version useOtavio Salvador2016-05-161-4/+0
| | | | | | | | We can now use the OpenCV 3.1. This removes the bbappend file which where ensuring we never use it with an i.MX6-based SoC. Change-Id: Icf6e3161c01155ee4bf20b3d7baca26eba52da62 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* pulseaudio: Remove the control for speaker/headphone widget for i.MX7DYuqing Zhu2016-05-162-1/+76
| | | | | | | | In order to fix issue "headphone volume will be set to zero when pulseaudio can't detect the headphone jack status", remove the control in configuration file. Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mesa-demos: Fix incorrent spelling of Upstream-Status tag.Tom Hochstein2016-05-161-1/+1
| | | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* linux-fslc: Update to 4.6-based forkOtavio Salvador2016-05-164-331/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This upgrades the Linux kernel to the upcoming 4.6 release. This includes some NXP related changes, which are target for 4.7. Those are: 9be3cdc ARM: mx5: dts: Enable USB OTG on M53EVK fe805c7 ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY e23d4ee ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO bc9f274 ARM: dts: imx6ul-14x14-evk: Add audio support 9214de9 ARM: dts: imx6qdl: Remove unneeded unit-addresses 49d0bea clk: imx7d: fix ahb clock mux 1 eda0002 ARM: dts: imx6: apalis: parallel lcd display support on ixora d9f2c8c ARM: dts: imx6sx-sdb: Add 198MHz operational point fa13784 ARM: dts: imx28-m28: Remove unneeded partition nodes 67c050c ARM: dts: imx6ul-pico-hobbit: Add initial support 41de276 ARM: dts: imx6: Do not hardcode the CLKO clock 13d63a6 ARM: dts: imx6: Add dts for Embest MarS Board 7d9db51 arm64: defconfig: enable freescale/nxp config options b9990f8 arm64: defconfig: enable 48-bit virtual addresses 36e1773 arm64: defconfig: cleanup the defconfig 3eb72e5 clk: imx: return correct frequency for Ethernet PLL 4e744f4 ARM: dts: imx6: fix dtc warnings for ipu endpoints 9c17803 ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation b6e07a8 ARM: dts: imx6sx: Add 198MHz operating point c4cb697 ARM: dts: imx6ul: Fix operating points e593654 arm64: dts: ls2080a: fsl-mc dt node updates dc4a4c1 Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs 43efec0 ARM: dts: imx6q-ba16: use wdog external reset 6a5ebd9 ARM: dts: imx: b450/b650v3: Move ldb_di clk assignment ecfff5f ARM: dts: imx6q-b850v3: Update display clock source 82b8386 ARM: dts: imx6q-b850v3: Remove ldb panel b0b039a ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support 1d5276b ARM: dts: i.MX3x: add keypad port devicetree nodes db45d65 ARM: dts: imx35: restore existing used clock enumeration 3af9f8f arm64: dts: ls1043a: add the DTS node for QSPI support e651264 Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string 5712e33 ARM: dts: ls1021a: add pix clock to DCU dts node 8ad4cee ARM: dts: ls1021a: DSPI has 6 chip-selects 8804a3f ARM: dts: ls1021a: Add gpio support for ls1021a platform f0f7b30 ARM: dts: imx6q-ba16: Remove unused vqmmc-supply cb8dacf ARM: dts: ls1021a: add SCFG MSI dts node 4a26cfb ARM: dts: imx28: add alternative pinmuxing for mac0 f407acf ARM: dts: imx6q-tbs2910: fix fec reset polarity aefe710 ARM: dts: vf610-zii-dev: Add ZII development board. 2045498 ARM: dts: vfxxx: add missing reg properties 95bd770 ARM: dts: vf-colibri: increase NAND clock speed cbd99f4 ARM: dts: vf-colibri: alias the primary FEC as ethernet0 6216880 ARM: dts: imx6sx-sdb: Add SAI support b547d70 bindings: fsl-imx-sdma: Document 'fsl,sdma-event-remap' property e74a168 ARM: dts: imx6sx: Remove unused property 4d9b42e ARM: dts: imx6sx: Fix SAI DMA index 6f7a786 ARM: dts: imx6q-ba16: Disable pwm2 by default d28c0fc ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board d2985a5 ARM: dts: imx6qdl-sabresd: Pass the hannstar panel compatible string 815f031 ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard 4531f68 ARM: dts: imx6: add support for more Ka-Ro electronics modules a5c5a20 ARM: dts: imx6-tx6: enable support for rtscts on UARTs 7686c67 ARM: dts: imx6-tx6: remove LED pinctrl setting from hoggrp e806f1d6 ARM: dts: imx6-tx6: remove regulator bus 5288f69 ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board 84757ea ARM: dts: imx6qdl-tx6: add mdio node for ethernet phy f756d41 ARM: dts: imx6-tx6: remove container node around pinctrl nodes 72e625a ARM: dts: imx6-tx6: disable the spi node by default 69751fa ARM: dts: imx6-tx6: cleanup; no functional change 0f276c6 ARM: dts: imx6-tx6: Relicense the Ka-Ro DT files under GPLv2/X11 2fb431b ARM: dts: imx25-pinfunc: remove SION for pins with an UART handshaking input mode 7a1e22f ARM: dts: imx25-pinfunc: add all UART mux modes 395dbf3 ARM: dts: imx: ba16: Add correct PCIe Tx Values b872157 ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL mainboard 290d3f9 ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules 2ce39b6 ARM: dts: vf610-colibri: enable display controller 8411ccb ARM: dts: vf610: add display nodes 4c36ca7 ARM: dts: imx: add Boundary Devices Nitrogen7 board b46656d ARM: dts: imx7d: add flexcan support d587538 ARM: dts: imx7d: add lcdif support b1334df arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes 8e403e3 arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes 9c3e8d5 arm64: dts: ls2080a: update the DTS for QSPI and DSPI support d03665c Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string 0e01fa6 arm64: dts: ls1043a-rdb: add the DTS for DSPI support 5139b339 ARM: multi_v5_defconfig: Enable recommended options for systemd c29da9c4 ARM: imx: always use TWD on IMX6Q dbcb3b1 clk: imx: vf610: fix whitespace in vf610-clock.h 7115a09 clk: imx: vf610: add TCON ipg clock 9241416 clk: imx: vf610: fix DCU clock tree be27a3e ARM: multi_v5_defconfig: Enable support for MX21/MX27 4cedc0d ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 7241dc3 ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO a60e2c2 ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support e4ca550 clk: imx: add ckil clock for i.MX7 118e922 clk: imx: vf610: add suspend/resume support 189c8c1 clk: imx: vf610: add WKPU unit ef2f187 clk: imx: vf610: leave DDR clock on 9a0e7b6 clk: imx: clk-gate2: allow custom gate configuration 4ecea9b clk: imx6sx: Register SAI clocks as shared clocks abb9468 arm64: dts: add LS1043a-QDS board support d6505c6 Documentation: DT: Add entry for Freescale LS1043a-QDS board Change-Id: Ia4693a462743e532d412fb3213cfee1149496c8a Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 2016.05-based forkOtavio Salvador2016-05-163-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The U-Boot 2016.05 is close to release and it is time to upgrade. This includes following changes on top of upcoming release, which are Yocto Project related: 0fcd279 wandboard: Drop revision specific DeviceTree support 0ab586a mx6sabresd: Enable video interfaces in bootargs 5976978 Revert "embestmx6boards: convert to use config_distro_bootcmd.h" 91f4fa5 iMX6: Change mmcroot to use fixed mmc block index for USDHC 968d872 embestmx6boards: Change default bootenv configuration 3233072 mx6sabresd: Use LDO dtb file until LDO bypass support is added df5f668 mx6slevk: Use LDO dtb file until LDO bypass support is added The following changes are included here, and queued for U-Boot 2016.07 release: a858d98 ARM: mx6: Enable MMC and SATA extfs boot support 70f4d22 SPL: Add CONFIG_SPL_ABORT_ON_RAW_IMAGE 5054e50 SPL: Let spl_parse_image_header() return value bf9c724 imx: imx-common: print i.MX 7 SoC names consistently dd6d9db imx: imx7d: fix ahb clock mux 1 24f4bb6 imx: iomux-v3: fix UART input selects 83609b3 ARM: mx6: Enable STDIO deregistering on Novena 0fc4e56 imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5 ffae8c1 imx: tools: imximage: fix CLR bit command Change-Id: I82aba59b47dfe530a6a1243f3227b914b973205f Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mesa-demos: Rebase patches due to OE-Core changesTom Hochstein2016-05-111-30/+15
| | | | | | | | Update patch Add-OpenVG-demos-to-support-wayland.patch due to changes applied in OE-Core:b851cb0a. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* asound.state: Update to 4.1.15-1.1.0Yuqing Zhu2016-05-111-44/+62
| | | | | | | | | | | | | | --Update wm8960audio configuration for mx6ul/mx7 1."Capture Switch" has been enabled, and 'Capture Volume' will make sense. The current 'Capture Volume' value is the max value 63. So need to modify the capture volume. 2.Add ADC data output select. 3.Remove amixer control 'Headset Jack' as mx7d-sdb doesn't have it. --Adding sii902xaudio configuration for mx7 Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* asound.conf: Update asound.conf to set default ctrl for kernel 4.1Yuqing Zhu2016-05-111-0/+5
| | | | | | | | | The default ctrl is missing from /etc/asound.conf. If don't using “-Dhw:0”, the sound will rout from alsa to pulseaudio, then to the sound device. Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-gst1.0-plugin: Stop using base_containsOtavio Salvador2016-05-091-1/+1
| | | | | | | | The base_contains function is deprecated and we ought to use bb.utils.contains instead. Change-Id: Ibdd989c45731b3d81507fc55cb989138875c23f7 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* gstreamer1.0-plugins-imx: Stop using base_containsOtavio Salvador2016-05-061-4/+4
| | | | | | | | The base_contains function is deprecated and we ought to use bb.utils.contains instead. Change-Id: Ia6c35c969b85062676e6c73359f392bb6a0c0f8a Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-05 17:38:26 +0000