4 files changed, 154 insertions, 0 deletions

diff --git a/meta-networking/recipes-connectivity/tayga/files/0001-include-sys-uio.patch b/meta-networking/recipes-connectivity/tayga/files/0001-include-sys-uio.patch
new file mode 100644
index 0000000000..0c6f1609af
--- /dev/null
+++ b/meta-networking/recipes-connectivity/tayga/files/0001-include-sys-uio.patch
@@ -0,0 +1,18 @@
+
+This patch addresses the following clang failure: tayga-0.9.2/nat64.c:119:6:
+error: call to undeclared function 'writev'; ISO C99 and later do not support
+implicit function declarations [-Wimplicit-function-declaration]
+
+Upstream-Status: Pending
+Signed-off-by: Pawel Langowski <pawel.langowski@3mdeb.com>
+
+--- tayga.h     2023-09-29 14:38:05.005837695 +0200
++++ tayga-2.h   2023-09-29 14:37:45.560837257 +0200
+@@ -20,6 +20,7 @@
+ #include <sys/stat.h>
+ #include <sys/ioctl.h>
+ #include <sys/socket.h>
++#include <sys/uio.h>
+ #include <netinet/in.h>
+ #include <arpa/inet.h>
+ #include <unistd.h>
diff --git a/meta-networking/recipes-connectivity/tayga/files/tayga.conf b/meta-networking/recipes-connectivity/tayga/files/tayga.conf
new file mode 100644
index 0000000000..c1b6163a45
--- /dev/null
+++ b/meta-networking/recipes-connectivity/tayga/files/tayga.conf
@@ -0,0 +1,103 @@
+#
+# Sample configuration file for TAYGA 0.9.2
+#
+# Modify this to use your own addresses!!
+#
+
+#
+# TUN device that TAYGA will use to exchange IPv4 and IPv6 packets with the
+# kernel.  You may use any name you like, but `nat64' is recommended.
+#
+# This device may be created before starting the tayga daemon by running
+# `tayga --mktun`.  This allows routing and firewall rules to be set up prior
+# to commencement of packet translation.
+#
+# Mandatory.
+#
+tun-device nat64
+
+#
+# TAYGA's IPv4 address.  This is NOT your router's IPv4 address!  TAYGA
+# requires its own address because it acts as an IPv4 and IPv6 router, and
+# needs to be able to send ICMP messages.  TAYGA will also respond to ICMP
+# echo requests (ping) at this address.
+#
+# This address can safely be located inside the dynamic-pool prefix.
+#
+# Mandatory.
+#
+ipv4-addr 192.168.254.1
+
+#
+# TAYGA's IPv6 address.  This is NOT your router's IPv6 address!  TAYGA
+# requires its own address because it acts as an IPv4 and IPv6 router, and
+# needs to be able to send ICMP messages.  TAYGA will also respond to ICMP
+# echo requests (ping6) at this address.
+#
+# You can leave ipv6-addr unspecified and TAYGA will construct its IPv6
+# address using ipv4-addr and the NAT64 prefix.
+#
+# Optional if the NAT64 prefix is specified, otherwise mandatory.  It is also
+# mandatory if the NAT64 prefix is 64:ff9b::/96 and ipv4-addr is a private
+# (RFC1918) address.
+#
+#ipv6-addr 2001:db8:1::2
+ipv6-addr fdaa:bb:1::1
+
+#
+# The NAT64 prefix.  The IPv4 address space is mapped into the IPv6 address
+# space by prepending this prefix to the IPv4 address.  Using a /96 prefix is
+# recommended in most situations, but all lengths specified in RFC 6052 are
+# supported.
+#
+# This must be a prefix selected from your organization's IPv6 address space
+# or the Well-Known Prefix 64:ff9b::/96.  Note that using the Well-Known
+# Prefix will prohibit IPv6 hosts from contacting IPv4 hosts that have private
+# (RFC1918) addresses, per RFC 6052.
+#
+# The NAT64 prefix need not be specified if all required address mappings are
+# listed in `map' directives.  (See below.)
+#
+# Optional.
+#
+##prefix 2001:db8:1:ffff::/96
+prefix 64:ff9b::/96
+
+#
+# Dynamic pool prefix.  IPv6 hosts which send traffic through TAYGA (and do
+# not correspond to a static map or an IPv4-translatable address in the NAT64
+# prefix) will be assigned an IPv4 address from the dynamic pool.  Dynamic
+# maps are valid for 124 minutes after the last matching packet is seen.
+#
+# If no unassigned addresses remain in the dynamic pool (or no dynamic pool is
+# configured), packets from unknown IPv6 hosts will be rejected with an ICMP
+# unreachable error.
+#
+# Optional.
+#
+dynamic-pool 192.168.254.0/24
+
+#
+# Persistent data storage directory.  The dynamic.map file, which saves the
+# dynamic maps that are created from dynamic-pool, is stored in this
+# directory.  Omit if you do not need these maps to be persistent between
+# instances of TAYGA.
+#
+# Optional.
+#
+data-dir /var/spool/tayga
+
+#
+# Establishes a single-host map.  If an IPv6 host should be consistently
+# reachable at a specific IPv4 address, the mapping can be specified in a
+# `map' directive.  (IPv6 hosts numbered with an IPv4-translatable address do
+# not need map directives.)
+#
+# IPv4 addresses specified in the `map' directive can safely be located inside
+# the dynamic-pool prefix.
+#
+# Optional.
+#
+#map 192.168.5.42 2001:db8:1:4444::1
+#map 192.168.5.43 2001:db8:1:4444::2
+#map 192.168.255.2 2001:db8:1:569::143
diff --git a/meta-networking/recipes-connectivity/tayga/files/tayga.service b/meta-networking/recipes-connectivity/tayga/files/tayga.service
new file mode 100644
index 0000000000..0bffeb92a5
--- /dev/null
+++ b/meta-networking/recipes-connectivity/tayga/files/tayga.service
@@ -0,0 +1,12 @@
+[Unit]
+SourcePath=/usr/sbin/tayga
+Description=LSB: userspace NAT64
+
+[Service]
+Type=forking
+ExecStart=/usr/sbin/tayga -d --config /etc/tayga.conf
+RemainAfterExit=yes
+TimeoutStopSec=infinity
+
+[Install]
+WantedBy=multi-user.target
diff --git a/meta-networking/recipes-connectivity/tayga/tayga_0.9.2.bb b/meta-networking/recipes-connectivity/tayga/tayga_0.9.2.bb
new file mode 100644
index 0000000000..36d35e6dee
--- /dev/null
+++ b/meta-networking/recipes-connectivity/tayga/tayga_0.9.2.bb
@@ -0,0 +1,21 @@
+LICENSE = "GPL-2.0-only"
+LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
+
+SRC_URI = " \
+        http://www.litech.org/tayga/tayga-${PV}.tar.bz2 \
+        file://tayga.conf \
+        file://tayga.service \
+        file://0001-include-sys-uio.patch;striplevel=0 \
+        "
+SRC_URI[sha256sum] = "2b1f7927a9d2dcff9095aff3c271924b052ccfd2faca9588b277431a44f0009c"
+
+SYSTEMD_PACKAGES = "${PN}"
+SYSTEMD_SERVICE:${PN} = "tayga.service"
+
+do_install:append() {
+  install -m 0644 ${WORKDIR}/tayga.conf ${D}${sysconfdir}/tayga.conf
+  install -d ${D}${systemd_unitdir}/system/
+  install -m 0644 ${WORKDIR}/tayga.service ${D}${systemd_unitdir}/system/
+}
+
+inherit autotools systemd