summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* networkmanager: introduce polkit package configStefan Agner2019-01-201-4/+3
| | | | | | | | | | | | Currently polkit is enabled if systemd is in package config. Those two things are orthogonal: NetworkManager can be used with systemd and without polkit just fine. Introduce a new polkit package config and enable it depending on whether polkit is in DISTRO_FEATURES. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* polkit: add polkit as a required distro featureStefan Agner2019-01-201-0/+2
| | | | | | | | | | Make sure polkit is in DISTRO_FEATURERS if this package is being installed. This will make sure that people who do use polkit in their image also do enabled the recently introduced distro feature polkit in their distro. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* atkmm: upgrade 2.24.2 -> 2.28.0Andreas Müller2019-01-191-2/+2
| | | | | Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* glibmm: upgrade 2.56.0 -> 2.58.0Andreas Müller2019-01-192-6/+7
| | | | | | | remove-examples.patch was refreshed with devtool Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* libsigc++-2.0: upgrade 2.10.0 -> 2.10.1Andreas Müller2019-01-191-2/+2
| | | | | Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* nginx: add default proxy_paramsAndré Draszik2019-01-192-0/+7
| | | | | | | | | | | | | As per Debian packaging - to use it, see https://wiki.debian.org/Nginx/DirectoryStructure#Extra_Parameters This file is most commonly included when Nginx is acting as a reverse proxy: include /etc/nginx/proxy_params; proxy_pass http://localhost:8000; Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* nginx: configuration updateAndré Draszik2019-01-193-105/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restructure the main configuration file to simplify custom configuration: * support inclusion of configuration fragments from subdirectories: - /etc/nginx/modules-enabled/*.conf - /etc/nginx/conf.d/*.conf - /etc/nginx/sites-enabled/* * default site (port 80): - move into /etc/nginx/sites-available/default_server and enable via symlink in /etc/nginx/sites-enabled/ - listen on IPv6 - drop unneeded example fragments * configure and enable gzip * update TLS settings to drop SSLv3 and enable TLSv1.3 for some safer defaults * update remaining bits to follow Debian standard configuration https://salsa.debian.org/nginx-team/nginx/blob/62a54a8ba66ee6cc1b4f8a33dab9a6f27a3fdac4/debian/conf/nginx.conf * drop unneeded example configuration bits from /etc/nginx/*.default These changes, in particular the configuration fragment support allow to easily customise nginx based on individual requirements. In addition, it is now possible for other recipes / packages to drop fragments into the respective directories in /etc/nginx without having to meddle with /etc/nginx/nginx.conf Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* nginx: update systemd unit using nginx recommendationAndré Draszik2019-01-192-3/+8
| | | | | | | | | | | | | | | | | | Our systemd unit doesn't follow the official recommendation, see https://www.nginx.com/resources/wiki/start/topics/examples/systemd/ Most importantly: * it should start after some additional specific targets/units * using PrivateTmp is a useful security feature, in particular to avoid cross domain scripting via the temp folder * using systemd's $MAINPID, we can distinguish between multiple running nginx instances correctly Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* rocksdb: make resulting cmake config relocatablePascal Bach2019-01-191-3/+3
| | | | | | | | | | | | | RocksDB is still using CMake 2.8 and thus does not make use of importet targets. This leads to hardcoded paths to the build directory in the resulting packaged files. The workaround for the issue is to bypass CMakes detection and let the linker deal with finding the right library. This is necessary until RocksDB moves to a more modern CMake. It's also applied in the Poco recipe right now. Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* logwatch:replace mv with cpHong Liu2019-01-191-3/+3
| | | | | | | | 1.Mv is used in the original code, which may cause "mv: cannot stat 'conf/': No such file or directory". So we use cp instead of it. Signed-off-by: Hong Liu <hongl.fnst@cn.fujitsu.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* python-pyinotify.inc: add RDEPEND on ${PYTHON_PN}-smtpdIoan-Adrian Ratiu2019-01-191-0/+1
| | | | | | | | pyinotify depends on having asyncore.py available which is provided by python2/3-smtpd. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* rocksdb: fix qa warning of buildpathsKai Kang2019-01-191-0/+5
| | | | | | | | | | | | | rocksdb fails qa check buildpaths: | WARNING: rocksdb-5.17.2-r0 do_package_qa: QA Issue: File | /work/core2-64-poky-linux/rocksdb/5.17.2-r0/packages-split/rocksdb-dev/usr/lib64/cmake/rocksdb/RocksDBTargets.cmake | in package contained reference to tmpdir [buildpaths] Removing buildpath info from the cmake file. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* xorg-driver: xf86-video-ati: Remove x86 COMPATIBLE_MACHINEAlistair Francis2019-01-161-2/+0
| | | | | | | | The ATI drivers can work on non-x86 platforms such as RISC-V, remove the x86 specific COMPATIBLE_MACHINE requirement. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* fluidsynth: upgrade 1.1.11 -> 2.0.3Andreas Müller2019-01-168-100/+563
| | | | | | | | | | | | | | | | * Fallout caused by API change should be fixed in all recipes depending fluidsynth. To make this happen I sent out patches to many projects during last autumn. * Add PACKAGECONFIG for profiling (disabled by default). * ARM-NEON-patch was reworked and profiling runs were performed with and without the patch. See patch description for profiling results. * We need to split tool to generate parameter tables to native. Since target and native builds do not share much in common we don't use BBCALLSEXTEND * Add patch which allows clients to reduce useless copies of buffers. Fluidsynth-DSSI (in meta-qt5-extra currently) is going to make use of this. Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* postgresql: Update the regex to determine PGMAJORVERSION to match v10+ ↵Akram Hameed2019-01-151-2/+2
| | | | | | | | database clusters Older versions of postgresql would generate MAJVER.MINVER in new clusters. 10+ do not. Update the regex to determine PGMAJORVERSION as a single int. Signed-off-by: Khem Raj <raj.khem@gmail.com>
* cli11: Add recipeWilliam A. Kennington III via Openembedded-devel2019-01-151-0/+16
| | | | | | | | cli11 is a c++ command line parser library that provides a simple user interface with modern c++ semantics. Signed-off-by: William A. Kennington III <wak@google.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* tcpdump: misc recipe cleanup + drop obsolete workaroundsAndre McCurdy2019-01-153-26/+54
| | | | | | | | | | | Remove obsolete workarounds and improve the workarounds that remain. For example, it hasn't been necessary to set ac_cv_linux_vers since tcpdump 4.6.0: https://github.com/the-tcpdump-group/tcpdump/commit/a42fc6e764abfe4a99eef993784733f735f6c874 Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* python-cryptography: drop python-pycparser dependencyStefan Agner2019-01-151-2/+0
| | | | | | | | The python-cryptography package is in fact not depending on python-pycparser. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* lockdev: Switch to use archive tarballs for SRC_URIKhem Raj2019-01-145-54/+82
| | | | | | | | | | | anonscm.debian.org has been replaced with https://salsa.debian.org however, lockdev has been dropped from debian packages, so its not maintained at salsa.debian.org, therefore resort to archives and add few more fixes to get it building from archive. bump PE since version still remains 1.0.3 but we drop +git${...} from PV Signed-off-by: Khem Raj <raj.khem@gmail.com>
* openal-soft: Upgrade to 1.19.1Khem Raj2019-01-143-5/+74
| | | | | | | | | | License-Update: Removed sections that are not needed see https://github.com/kcat/openal-soft/commit/4c61103e34b190c53f0669cb341355d031044571#diff-7116ef0705885343c9e1b2171a06be0e Switch to github for SRC_URI Signed-off-by: Khem Raj <raj.khem@gmail.com>
* haveged: Upgrade 1.9.4Khem Raj2019-01-142-10/+10
| | | | | | | Upstream release mechanism has switched to using github Forward port and update patch status Signed-off-by: Khem Raj <raj.khem@gmail.com>
* dhcpcd: upgrade to dhcpcd 7.0.8Stefano Cappa2019-01-132-3/+50
| | | | | Signed-off-by: Stefano Cappa <stefano.cappa.ks89@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* python-pbr_4.2.0.bb: Define src uri checksums in recipeKhem Raj2019-01-131-0/+4
| | | | | | There moved out from inc file in oe-core Signed-off-by: Khem Raj <raj.khem@gmail.com>
* meta-oe: remove True option to getVar calls (again)André Draszik2019-01-137-12/+12
| | | | | | | | | | | | | | A couple have still been missed in the past despite multiple attempts at doing so (or simply have re-appeared?). Search & replace made using the following command: sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' \ -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' \ | cut -d':' -f1 \ | sort -u) Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* meta-networking: remove True option to getVar calls (again)André Draszik2019-01-134-8/+8
| | | | | | | | | | | | | | A couple have still been missed in the past despite multiple attempts at doing so (or simply have re-appeared?). Search & replace made using the following command: sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' \ -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' \ | cut -d':' -f1 \ | sort -u) Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* meta-initramfs: remove True option to getVar calls (again)André Draszik2019-01-131-2/+2
| | | | | | | | | | | | | | A couple have still been missed in the past despite multiple attempts at doing so (or simply have re-appeared?). Search & replace made using the following command: sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' \ -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' \ | cut -d':' -f1 \ | sort -u) Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* wireshark: update to 2.6.6Armin Kuster2019-01-131-2/+2
| | | | | | | | | | | | | | includes: wnpa-sec-2019-01 The 6LoWPAN dissector could crash. Bug 15217. CVE-2019-5716. wnpa-sec-2019-02 The P_MUL dissector could crash. Bug 15337. CVE-2019-5717. wnpa-sec-2019-03 The RTSE dissector and other dissectors could crash. Bug 15373. CVE-2019-5718. wnpa-sec-2019-04 The ISAKMP dissector could crash. Bug 15374. CVE-2019-5719. For more info see: https://www.wireshark.org/docs/relnotes/wireshark-2.6.6.html Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* meta-initramfs: add pkg group and imageArmin Kuster2019-01-132-0/+44
| | | | | Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* meta-networking: add pkg group and imagesArmin Kuster2019-01-133-0/+132
| | | | | Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* meta-webserver: add pkg group and imageArmin Kuster2019-01-133-0/+47
| | | | | Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* meta-multimedia: add pgk group and imagesArmin Kuster2019-01-133-0/+63
| | | | | Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* meta-filesystems: add pkg groups and test imageArmin Kuster2019-01-133-0/+45
| | | | | Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* meta-python: add pkg groups and image for testingArmin Kuster2019-01-134-0/+168
| | | | | Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* mete-perl: add pkg groups and image for testingArmin Kuster2019-01-134-0/+69
| | | | | Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* drbd: update to 9.0.16Armin Kuster2019-01-131-4/+3
| | | | | Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* modemmanager: Add libxslt-native to DEPENDSTheodore A. Roth2019-01-111-1/+1
| | | | | | | | | | | | | | | | | Addresses the following build error: | make[2]: Entering directory '/home/matt/renew_thud/build/tmp/work/armv5e-poky-linux-gnueabi/modemmanager/1.8.2-r0.tr0/build/include' | xsltproc --xinclude --nonet ../../ModemManager-1.8.2/build-aux/header-generator.xsl ../../ModemManager-1.8.2/introspection/all.xml > ModemManager-names.h | /bin/bash: xsltproc: command not found | make[2]: *** [Makefile:651: ModemManager-names.h] Error 127 Problem doesn't manifest if the host has already installed xsltproc outside of OE environment. Signed-off-by: Theodore A. Roth <troth@openavr.org> Signed-off-by: Matthew Stanger <matthew_stanger@trimble.com> Signed-off-by: Theodore A. Roth <theodore_roth@trimble.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* openipmi: correctly build against target perl headersAlexander Kanavin2019-01-111-1/+2
| | | | | | | | Previously it was built with native perl headers, which was okay with perl 5.24, but not with perl 5.28. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* postgresql: correctly build against target perlAlexander Kanavin2019-01-111-2/+6
| | | | | | | | Previously perl-native headers were erroneously included, which was causing issues with the new perl recipe. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* adduser: correct perl installation directory to match new perl recipeAlexander Kanavin2019-01-111-1/+1
| | | | | Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* libteam: Upgrade to 1.28Mingli Yu2019-01-111-4/+1
| | | | | | | | Remove the useless checksum lines as the source is git repo, not the tar file. Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* libdbi-perl: Upgrade to 1.642Mingli Yu2019-01-111-2/+2
| | | | | Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* minicoredumper: Update to 2.0.1Pierre-Jean Texier2019-01-101-3/+2
| | | | | | | | | - Drop upstreamed patch - Update COPYING file checksum: the copyright date changes and there is a convertion to SPDX Format. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* guider: add a new runtime profiler packagePeace Lee2019-01-101-0/+35
| | | | | | | | | | | | guider [1] is a system-wide performance analyzer for platforms based on linux kernel. It can measure a variety of system resource usage and trace thread/process activities. It also reports vary meaningful output to analyze system status. [1] https://github.com/iipeace/guider Signed-off-by: Peace Lee <iipeace5@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* licenses: Add Arphic-Public-License textKhem Raj2019-01-101-0/+58
| | | | | | | ttf-arphic-uming recipe in meta-oe needs this source: http://ftp.gnu.org/gnu/non-gnu/chinese-fonts-truetype/LICENSE Signed-off-by: Khem Raj <raj.khem@gmail.com>
* mini-iconv: Don't use ${PN}Richard Weinberger2019-01-101-1/+1
| | | | | | | | | Don't use ${PN} for the source dir, it will break multilib builds. The correct variable is ${BPN}. Cc: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* mksh: Don't use ${PN}Richard Weinberger2019-01-101-1/+1
| | | | | | | | | Don't use ${PN} for the source dir, it will break multilib builds. The correct variable is ${BPN}. Cc: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* libdc1394: Don't use ${PN}Richard Weinberger2019-01-101-1/+1
| | | | | | | | | Don't use ${PN} for the source dir, it will break multilib builds. The correct variable is ${BPN}. Cc: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* caps: Don't use ${PN}Richard Weinberger2019-01-101-3/+1
| | | | | | | | | | | | | | | Don't use ${PN} for the source dir, it will break multilib builds. The correct variable is ${BPN}. The bitbake defaults are: BP = "${BPN}-${PV}" S = "${WORKDIR}/${BP}" Therefore we can remove this line. Cc: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* wv: Don't use ${PN}Richard Weinberger2019-01-101-2/+0
| | | | | | | | | | | | | | | Don't use ${PN} for the source dir, it will break multilib builds. The correct variable is ${BPN}. The bitbake defaults are: BP = "${BPN}-${PV}" S = "${WORKDIR}/${BP}" Therefore we can remove this line. Cc: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Khem Raj <raj.khem@gmail.com>
* fuse-exfat: Don't use ${PN}Richard Weinberger2019-01-101-1/+0
| | | | | | | | | | | | | | | Don't use ${PN} for the source dir, it will break multilib builds. The correct variable is ${BPN}. The bitbake defaults are: BP = "${BPN}-${PV}" S = "${WORKDIR}/${BP}" Therefore we can remove this line. Cc: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Khem Raj <raj.khem@gmail.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-04 19:46:48 +0000