From db5575b55e2245fdab8eb6e711cf4d1d061f5aa7 Mon Sep 17 00:00:00 2001 From: Markus Volk Date: Sun, 18 Aug 2024 19:13:59 +0200 Subject: pipewire: update 1.2.1 -> 1.2.2 PipeWire 1.2.2 (2024-07-31) This is a bugfix release that is API and ABI compatible with the previous 1.2.x and 1.0.x releases. Highlights - Fix some more fallout of the async nodes rewrite. Fixes some crackling, xruns and possibly also some crashes in some cases. - Fix freewheeling timeouts in case of xruns. This fixes ardour export. - Fix event mixdown in JACK. Fixes qsynth and possibly other apps. - Some more small fixes and improvements. PipeWire - Add a new SPA_IO_CLOCK_FLAG_XRUN_RECOVER flag when the process function is called because of xrun recovery. - Properly stop nodes in all cases, this avoids spurious xruns and scheduling errors. (#4122) - Make sure async nodes receive an async link in all cases. Do the processing of source output ports slightly differently to make sure we don't cause latency for sources. (#4138) (#4133) - Fix some races when negotiating and starting nodes. (#4094) - Actually include the config.h header to use malloc_trim() to reduce memory usage in pulse-server. Modules - Avoid unloading some modules on stream errors because it is possible to recover from the error. (#4121) - Fix a (harmless) warning in module-rtp because of comparing samples and time. (#4095) SPA - Let the freewheel driver detect xrun recovery and handle the timeouts correctly. This fixes an issue with ardour export. - Remove the HDMI/AC3 profiles. they turn out to fail on some hardware with no way to detect this. - Signal the eventfd when the loop is full to make sure the other thread is woken up to process the queue. JACK - Don't check timestamps when mixing down events. The timestamps are only checked when writing new events with the public API. This fixes an issue where qsynth would not receive midi events anymore. - Fix the jack_get_time() function, it was returning nano instead of micro seconds. Signed-off-by: Markus Volk Signed-off-by: Khem Raj --- .../recipes-multimedia/pipewire/pipewire_1.2.1.bb | 392 --------------------- .../recipes-multimedia/pipewire/pipewire_1.2.2.bb | 392 +++++++++++++++++++++ 2 files changed, 392 insertions(+), 392 deletions(-) delete mode 100644 meta-multimedia/recipes-multimedia/pipewire/pipewire_1.2.1.bb create mode 100644 meta-multimedia/recipes-multimedia/pipewire/pipewire_1.2.2.bb (limited to 'meta-multimedia') diff --git a/meta-multimedia/recipes-multimedia/pipewire/pipewire_1.2.1.bb b/meta-multimedia/recipes-multimedia/pipewire/pipewire_1.2.1.bb deleted file mode 100644 index a938ca632a..0000000000 --- a/meta-multimedia/recipes-multimedia/pipewire/pipewire_1.2.1.bb +++ /dev/null @@ -1,392 +0,0 @@ -SUMMARY = "Multimedia processing server for Linux" -DESCRIPTION = "Linux server for handling and routing audio and video streams between applications and multimedia I/O devices" -HOMEPAGE = "https://pipewire.org/" -BUGTRACKER = "https://gitlab.freedesktop.org/pipewire/pipewire/issues" -SECTION = "multimedia" - -LICENSE = "MIT & LGPL-2.1-or-later & GPL-2.0-only" -LIC_FILES_CHKSUM = " \ - file://LICENSE;md5=2158739e172e58dc9ab1bdd2d6ec9c72 \ - file://COPYING;md5=97be96ca4fab23e9657ffa590b931c1a \ -" - -DEPENDS = "dbus ncurses" - -SRCREV = "d55f5ef60869fcd0b8ea4879b51607efab2eef33" -SRC_URI = "git://gitlab.freedesktop.org/pipewire/pipewire.git;branch=1.2;protocol=https" - -S = "${WORKDIR}/git" - -inherit meson pkgconfig systemd gettext useradd - -USERADD_PACKAGES = "${PN}" - -GROUPADD_PARAM:${PN} = "--system pipewire" - -USERADD_PARAM:${PN} = "--system --home / --no-create-home \ - --comment 'PipeWire multimedia daemon' \ - --gid pipewire --groups audio,video \ - pipewire" - -SYSTEMD_PACKAGES = "${PN}" - -# For "EVL", look up https://evlproject.org/ . It involves -# a specially prepared kernel, and is currently unavailable -# in Yocto. -# -# -# manpage generation requires xmltoman, which is not available. -# -# The session-managers list specifies which session managers Meson -# shall download (via git clone) and build as subprojects. In OE, -# this is not how a session manager should be built. Instead, they -# should be integrated as separate OE recipes. To prevent PipeWire -# from using this Meson feature, set an empty list. -# This does not disable support or the need for session managers, -# it just prevents this subproject feature. -# -# AptX and LDAC are not available in OE. Currently, neither -# are lv2, ROC, and libmysofa. -# -# The RTKit module is deprecated in favor of the newer RT module. -# It still exists for legacy setups that still include it in -# their PipeWire configuration files. -EXTRA_OEMESON += " \ - -Devl=disabled \ - -Dtests=disabled \ - -Dudevrulesdir=${nonarch_base_libdir}/udev/rules.d/ \ - -Dsystemd-system-unit-dir=${systemd_system_unitdir} \ - -Dsystemd-user-unit-dir=${systemd_user_unitdir} \ - -Dman=disabled \ - -Dsession-managers='[]' \ - -Dlv2=disabled \ - -Droc=disabled \ - -Dbluez5-codec-aptx=disabled \ - -Dbluez5-codec-ldac=disabled \ - -Dlegacy-rtkit=false \ - -Dlibmysofa=disabled \ -" - -# spa alsa plugin code uses typedef redefinition, which is officially a C11 feature. -# Pipewire builds with 'c_std=gnu99' by default. Recent versions of gcc don't issue this warning in gnu99 -# mode but it looks like clang still does -CFLAGS:append = " -Wno-typedef-redefinition" - -# Specify linking with -latomic on architectures missing 64bit atomics. -LDFLAGS += "${@bb.utils.contains_any('TUNE_FEATURES', 'riscv32 armv5 mips ppc32 m32', '-latomic', '', d)}" - -# According to wireplumber documentation only one session manager should be installed at a time -# Possible options are media-session, which has fewer dependencies but is very simple, -# or wireplumber, which is more powerful. -PIPEWIRE_SESSION_MANAGER ??= "wireplumber" - -FFMPEG_AVAILABLE = "${@bb.utils.contains('LICENSE_FLAGS_ACCEPTED', 'commercial', 'ffmpeg', '', d)}" -BLUETOOTH_AAC = "${@bb.utils.contains('LICENSE_FLAGS_ACCEPTED', 'commercial', 'bluez-aac', '', d)}" - -PACKAGECONFIG:class-target ??= " \ - ${@bb.utils.contains('DISTRO_FEATURES', 'zeroconf', 'avahi', '', d)} \ - ${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', 'bluez bluez-opus ${BLUETOOTH_AAC}', '', d)} \ - ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd systemd-system-service systemd-user-service', '', d)} \ - ${@bb.utils.filter('DISTRO_FEATURES', 'alsa vulkan pulseaudio', d)} \ - ${PIPEWIRE_SESSION_MANAGER} \ - ${FFMPEG_AVAILABLE} avahi flatpak gstreamer gsettings jack libusb pw-cat raop sndfile v4l2 udev volume webrtc-echo-cancelling libcamera readline \ -" - -# "jack" and "pipewire-jack" packageconfigs cannot be both enabled, -# since "jack" imports libjack, and "pipewire-jack" generates -# libjack.so* files, thus colliding with the libpack package. This -# is why these two are marked in their respective packageconfigs -# as being in conflict. -PACKAGECONFIG[alsa] = "-Dalsa=enabled,-Dalsa=disabled,alsa-lib udev,,pipewire-alsa pipewire-alsa-card-profile" -PACKAGECONFIG[avahi] = "-Davahi=enabled,-Davahi=disabled,avahi" -PACKAGECONFIG[bluez] = "-Dbluez5=enabled,-Dbluez5=disabled,bluez5 sbc" -PACKAGECONFIG[bluez-aac] = "-Dbluez5-codec-aac=enabled,-Dbluez5-codec-aac=disabled,fdk-aac" -PACKAGECONFIG[bluez-opus] = "-Dbluez5-codec-opus=enabled,-Dbluez5-codec-opus=disabled,libopus" -PACKAGECONFIG[bluez-lc3] = "-Dbluez5-codec-lc3=enabled,-Dbluez5-codec-lc3=disabled,liblc3" -# From the pipewire git log: -# "Some Linux phones doesn't use oFono but ModemManager to control the modem." -# This packageconfig enables modemmanager specific code in the BlueZ backend. -PACKAGECONFIG[bluez-backend-native-mm] = "-Dbluez5-backend-native-mm=enabled,-Dbluez5-backend-native-mm=disabled,modemmanager" -PACKAGECONFIG[docs] = "-Ddocs=enabled,-Ddocs=disabled,doxygen-native graphviz-native" -PACKAGECONFIG[ffmpeg] = "-Dffmpeg=enabled,-Dffmpeg=disabled,ffmpeg" -PACKAGECONFIG[flatpak] = "-Dflatpak=enabled,-Dflatpak=disabled,glib-2.0" -PACKAGECONFIG[gsettings] = "-Dgsettings=enabled,-Dgsettings=disabled,glib-2.0" -PACKAGECONFIG[gstreamer] = "-Dgstreamer=enabled,-Dgstreamer=disabled,glib-2.0 gstreamer1.0 gstreamer1.0-plugins-base,,gstreamer1.0-pipewire" -PACKAGECONFIG[jack] = "-Djack=enabled,-Djack=disabled,jack,,,pipewire-jack" -PACKAGECONFIG[libcamera] = "-Dlibcamera=enabled,-Dlibcamera=disabled,libcamera libdrm" -PACKAGECONFIG[libcanberra] = "-Dlibcanberra=enabled,-Dlibcanberra=disabled,libcanberra" -PACKAGECONFIG[libusb] = "-Dlibusb=enabled,-Dlibusb=disabled,libusb" -PACKAGECONFIG[media-session] = ",,,pipewire-media-session,,wireplumber" -PACKAGECONFIG[pulseaudio] = "-Dlibpulse=enabled,-Dlibpulse=disabled,pulseaudio,,pipewire-pulse" -PACKAGECONFIG[pipewire-alsa] = "-Dpipewire-alsa=enabled,-Dpipewire-alsa=disabled,alsa-lib" -PACKAGECONFIG[pipewire-jack] = "-Dpipewire-jack=enabled -Dlibjack-path=${libdir}/${PW_MODULE_SUBDIR}/jack,-Dpipewire-jack=disabled,jack,,pipewire-jack,jack" -PACKAGECONFIG[pw-cat] = "-Dpw-cat=enabled,-Dpw-cat=disabled" -PACKAGECONFIG[raop] = "-Draop=enabled,-Draop=disabled,openssl" -# Starting with version 0.3.60, readline usage can be turned off in pw-cli. -# If it is disabled, getline() is used as a fallback. -PACKAGECONFIG[readline] = "-Dreadline=enabled,-Dreadline=disabled,readline" -PACKAGECONFIG[sdl2] = "-Dsdl2=enabled,-Dsdl2=disabled,libsdl2" -PACKAGECONFIG[sndfile] = "-Dsndfile=enabled,-Dsndfile=disabled,libsndfile1" -PACKAGECONFIG[systemd] = "-Dsystemd=enabled,-Dsystemd=disabled,systemd" -PACKAGECONFIG[systemd-system-service] = "-Dsystemd-system-service=enabled,-Dsystemd-system-service=disabled,systemd" -# "systemd-user-service" packageconfig will only install service -# files to rootfs but not enable them as systemd.bbclass -# currently lacks the feature of enabling user services. -PACKAGECONFIG[systemd-user-service] = "-Dsystemd-user-service=enabled,-Dsystemd-user-service=disabled,systemd" -# pw-cat needs sndfile packageconfig to be enabled -PACKAGECONFIG[udev] = "-Dudev=enabled,-Dudev=disabled,udev" -PACKAGECONFIG[v4l2] = "-Dv4l2=enabled,-Dv4l2=disabled,udev" -PACKAGECONFIG[volume] = "-Dvolume=enabled,-Dvolume=disabled" -PACKAGECONFIG[vulkan] = "-Dvulkan=enabled,-Dvulkan=disabled,vulkan-headers vulkan-loader" -PACKAGECONFIG[webrtc-echo-cancelling] = "-Decho-cancel-webrtc=enabled,-Decho-cancel-webrtc=disabled,webrtc-audio-processing-1" -PACKAGECONFIG[wireplumber] = ",,,wireplumber,,media-session" - -PACKAGESPLITFUNCS:prepend = " split_dynamic_packages " -PACKAGESPLITFUNCS:append = " set_dynamic_metapkg_rdepends " - -SPA_SUBDIR = "spa-0.2" -PW_MODULE_SUBDIR = "pipewire-0.3" - -remove_unused_installed_files() { - # jack.conf is used by pipewire-jack (not the JACK SPA plugin). - # Remove it if pipewire-jack is not built to avoid creating the - # pipewire-jack package. - if ${@bb.utils.contains('PACKAGECONFIG', 'pipewire-jack', 'false', 'true', d)}; then - rm -f "${D}${datadir}/pipewire/jack.conf" - fi - - # minimal.conf is an example of how to minimally configure the - # daemon and is not meant to be used for production. - rm -f "${D}${datadir}/pipewire/minimal.conf" -} - -do_install[postfuncs] += "remove_unused_installed_files" - -python split_dynamic_packages () { - # Create packages for each SPA plugin. These plugins are located - # in individual subdirectories, so a recursive search is needed. - spa_libdir = d.expand('${libdir}/${SPA_SUBDIR}') - do_split_packages(d, spa_libdir, r'^libspa-(.*)\.so$', d.expand('${PN}-spa-plugins-%s'), 'PipeWire SPA plugin for %s', extra_depends='', recursive=True) - - # Create packages for each PipeWire module. - pw_module_libdir = d.expand('${libdir}/${PW_MODULE_SUBDIR}') - do_split_packages(d, pw_module_libdir, r'^libpipewire-module-(.*)\.so$', d.expand('${PN}-modules-%s'), 'PipeWire %s module', extra_depends='', recursive=False) -} - -python set_dynamic_metapkg_rdepends () { - import os - import oe.utils - - if bb.data.inherits_class('nativesdk', d) or bb.data.inherits_class('native', d): - return - - # Go through all generated SPA plugin and PipeWire module packages - # (excluding the main package and the -meta package itself) and - # add them to the -meta package as RDEPENDS. - - base_pn = d.getVar('PN') - - spa_pn = base_pn + '-spa-plugins' - spa_metapkg = spa_pn + '-meta' - - pw_module_pn = base_pn + '-modules' - pw_module_metapkg = pw_module_pn + '-meta' - - d.setVar('ALLOW_EMPTY:' + spa_metapkg, "1") - d.setVar('FILES:' + spa_metapkg, "") - - d.setVar('ALLOW_EMPTY:' + pw_module_metapkg, "1") - d.setVar('FILES:' + pw_module_metapkg, "") - - blacklist = [ spa_pn, spa_metapkg, pw_module_pn, pw_module_metapkg ] - spa_metapkg_rdepends = [] - pw_module_metapkg_rdepends = [] - pkgdest = d.getVar('PKGDEST') - - for pkg in oe.utils.packages_filter_out_system(d): - if pkg in blacklist: - continue - - is_spa_pkg = pkg.startswith(spa_pn) - is_pw_module_pkg = pkg.startswith(pw_module_pn) - if not is_spa_pkg and not is_pw_module_pkg: - continue - - if pkg in spa_metapkg_rdepends or pkg in pw_module_metapkg_rdepends: - continue - - # See if the package is empty by looking at the contents of its - # PKGDEST subdirectory. If this subdirectory is empty, then then - # package is empty as well. Empty packages do not get added to - # the meta package's RDEPENDS. - pkgdir = os.path.join(pkgdest, pkg) - if os.path.exists(pkgdir): - dir_contents = os.listdir(pkgdir) or [] - else: - dir_contents = [] - is_empty = len(dir_contents) == 0 - if not is_empty: - if is_spa_pkg: - spa_metapkg_rdepends.append(pkg) - if is_pw_module_pkg: - pw_module_metapkg_rdepends.append(pkg) - - d.setVar('RDEPENDS:' + spa_metapkg, ' '.join(spa_metapkg_rdepends)) - d.setVar('DESCRIPTION:' + spa_metapkg, spa_pn + ' meta package') - - d.setVar('RDEPENDS:' + pw_module_metapkg, ' '.join(pw_module_metapkg_rdepends)) - d.setVar('DESCRIPTION:' + pw_module_metapkg, pw_module_pn + ' meta package') -} - -PACKAGES =+ "\ - libpipewire \ - ${PN}-tools \ - ${PN}-pulse \ - ${PN}-alsa \ - ${PN}-jack \ - ${PN}-spa-plugins \ - ${PN}-spa-plugins-meta \ - ${PN}-spa-tools \ - ${PN}-modules \ - ${PN}-modules-meta \ - ${PN}-alsa-card-profile \ - ${PN}-v4l2 \ - ${PN}-aes67 \ - gstreamer1.0-pipewire \ -" - -PACKAGES_DYNAMIC = "^${PN}-spa-plugins.* ^${PN}-modules.*" -PACKAGES_DYNAMIC:class-native = "" - -SYSTEMD_SERVICE:${PN} = "${@bb.utils.contains('PACKAGECONFIG', 'systemd-system-service', 'pipewire.service', '', d)}" -CONFFILES:${PN} += "${datadir}/pipewire/pipewire.conf" -FILES:${PN} = " \ - ${datadir}/pipewire \ - ${systemd_system_unitdir}/pipewire* \ - ${systemd_user_unitdir} \ - ${bindir}/pipewire \ - ${bindir}/pipewire-avb \ - ${bindir}/pipewire-vulkan \ -" - -RRECOMMENDS:${PN}:class-target += " \ - pipewire-modules-meta \ - pipewire-spa-plugins-meta \ -" - -FILES:${PN}-dev += " \ - ${libdir}/${PW_MODULE_SUBDIR}/jack/libjack*.so \ -" - -CONFFILES:libpipewire += "${datadir}/pipewire/client.conf" -FILES:libpipewire = " \ - ${datadir}/pipewire/client.conf \ - ${libdir}/libpipewire-*.so.* \ -" -# Add the bare minimum modules and plugins required to be able -# to use libpipewire. Without these, it is essentially unusable. -RDEPENDS:libpipewire += " \ - ${PN}-modules-client-node \ - ${PN}-modules-protocol-native \ - ${PN}-spa-plugins-support \ -" - -FILES:${PN}-tools = " \ - ${bindir}/pw-cat \ - ${bindir}/pw-cli \ - ${bindir}/pw-config \ - ${bindir}/pw-container \ - ${bindir}/pw-dot \ - ${bindir}/pw-dsdplay \ - ${bindir}/pw-dump \ - ${bindir}/pw-encplay \ - ${bindir}/pw-link \ - ${bindir}/pw-loopback \ - ${bindir}/pw-metadata \ - ${bindir}/pw-mididump \ - ${bindir}/pw-midiplay \ - ${bindir}/pw-midirecord \ - ${bindir}/pw-mon \ - ${bindir}/pw-play \ - ${bindir}/pw-profiler \ - ${bindir}/pw-record \ - ${bindir}/pw-reserve \ - ${bindir}/pw-top \ -" - -# This is a shim daemon that is intended to be used as a -# drop-in PulseAudio replacement, providing a pulseaudio-compatible -# socket that can be used by applications that use libpulse. -CONFFILES:${PN}-pulse += "${datadir}/pipewire/pipewire-pulse.conf" -FILES:${PN}-pulse = " \ - ${datadir}/pipewire/pipewire-pulse.conf \ - ${systemd_system_unitdir}/pipewire-pulse.* \ - ${systemd_user_unitdir}/pipewire-pulse.* \ - ${bindir}/pipewire-pulse \ -" -RDEPENDS:${PN}-pulse += " \ - ${PN}-modules-protocol-pulse \ -" - -# ALSA plugin to redirect audio to pipewire. -FILES:${PN}-alsa = "\ - ${libdir}/alsa-lib/* \ - ${datadir}/alsa/alsa.conf.d/* \ -" - -# JACK drop-in libraries to redirect audio to pipewire. -CONFFILES:${PN}-jack = "${datadir}/pipewire/jack.conf" -FILES:${PN}-jack = "\ - ${bindir}/pw-jack \ - ${datadir}/pipewire/jack.conf \ - ${libdir}/${PW_MODULE_SUBDIR}/jack/libjack*.so.* \ -" - -# Dynamic SPA plugin packages (see set_dynamic_metapkg_rdepends). -FILES:${PN}-spa-plugins = "" -RRECOMMENDS:${PN}-spa-plugins += "${PN}-spa-plugins-meta" - -FILES:${PN}-spa-plugins-bluez5 += " \ - ${datadir}/${SPA_SUBDIR}/bluez5/* \ -" - -FILES:${PN}-spa-tools = " \ - ${bindir}/spa-* \ -" - -# Dynamic PipeWire module packages (see set_dynamic_metapkg_rdepends). -FILES:${PN}-modules = "" -RRECOMMENDS:${PN}-modules += "${PN}-modules-meta" - -CONFFILES:${PN}-modules-rt = "${datadir}/pipewire/client-rt.conf" -FILES:${PN}-modules-rt += " \ - ${datadir}/pipewire/client-rt.conf \ - ${sysconfdir}/security/limits.d/* \ - " - -CONFFILES:${PN}-modules-filter-chain = "${datadir}/pipewire/filter-chain/*" -FILES:${PN}-modules-filter-chain += " \ - ${datadir}/pipewire/filter-chain/* \ -" - -FILES:${PN}-alsa-card-profile = " \ - ${datadir}/alsa-card-profile/* \ - ${nonarch_base_libdir}/udev/rules.d/90-pipewire-alsa.rules \ -" - -# V4L2 interface emulator for sending/receiving data between PipeWire and V4L2 applications. -FILES:${PN}-v4l2 += " \ - ${bindir}/pw-v4l2 \ - ${libdir}/${PW_MODULE_SUBDIR}/v4l2/libpw-v4l2.so \ -" - -# AES67 is a standard for audio over IP, from the Audio Engineering Society (AES). -FILES:${PN}-aes67 += " \ - ${bindir}/pipewire-aes67 \ -" - -FILES:gstreamer1.0-pipewire = " \ - ${libdir}/gstreamer-1.0/* \ -" - -BBCLASSEXTEND = "native nativesdk" diff --git a/meta-multimedia/recipes-multimedia/pipewire/pipewire_1.2.2.bb b/meta-multimedia/recipes-multimedia/pipewire/pipewire_1.2.2.bb new file mode 100644 index 0000000000..ab9f0c19d5 --- /dev/null +++ b/meta-multimedia/recipes-multimedia/pipewire/pipewire_1.2.2.bb @@ -0,0 +1,392 @@ +SUMMARY = "Multimedia processing server for Linux" +DESCRIPTION = "Linux server for handling and routing audio and video streams between applications and multimedia I/O devices" +HOMEPAGE = "https://pipewire.org/" +BUGTRACKER = "https://gitlab.freedesktop.org/pipewire/pipewire/issues" +SECTION = "multimedia" + +LICENSE = "MIT & LGPL-2.1-or-later & GPL-2.0-only" +LIC_FILES_CHKSUM = " \ + file://LICENSE;md5=2158739e172e58dc9ab1bdd2d6ec9c72 \ + file://COPYING;md5=97be96ca4fab23e9657ffa590b931c1a \ +" + +DEPENDS = "dbus ncurses" + +SRCREV = "e224ccdcb7514bc7417f46c75d137fbee231e7fc" +SRC_URI = "git://gitlab.freedesktop.org/pipewire/pipewire.git;branch=1.2;protocol=https" + +S = "${WORKDIR}/git" + +inherit meson pkgconfig systemd gettext useradd + +USERADD_PACKAGES = "${PN}" + +GROUPADD_PARAM:${PN} = "--system pipewire" + +USERADD_PARAM:${PN} = "--system --home / --no-create-home \ + --comment 'PipeWire multimedia daemon' \ + --gid pipewire --groups audio,video \ + pipewire" + +SYSTEMD_PACKAGES = "${PN}" + +# For "EVL", look up https://evlproject.org/ . It involves +# a specially prepared kernel, and is currently unavailable +# in Yocto. +# +# +# manpage generation requires xmltoman, which is not available. +# +# The session-managers list specifies which session managers Meson +# shall download (via git clone) and build as subprojects. In OE, +# this is not how a session manager should be built. Instead, they +# should be integrated as separate OE recipes. To prevent PipeWire +# from using this Meson feature, set an empty list. +# This does not disable support or the need for session managers, +# it just prevents this subproject feature. +# +# AptX and LDAC are not available in OE. Currently, neither +# are lv2, ROC, and libmysofa. +# +# The RTKit module is deprecated in favor of the newer RT module. +# It still exists for legacy setups that still include it in +# their PipeWire configuration files. +EXTRA_OEMESON += " \ + -Devl=disabled \ + -Dtests=disabled \ + -Dudevrulesdir=${nonarch_base_libdir}/udev/rules.d/ \ + -Dsystemd-system-unit-dir=${systemd_system_unitdir} \ + -Dsystemd-user-unit-dir=${systemd_user_unitdir} \ + -Dman=disabled \ + -Dsession-managers='[]' \ + -Dlv2=disabled \ + -Droc=disabled \ + -Dbluez5-codec-aptx=disabled \ + -Dbluez5-codec-ldac=disabled \ + -Dlegacy-rtkit=false \ + -Dlibmysofa=disabled \ +" + +# spa alsa plugin code uses typedef redefinition, which is officially a C11 feature. +# Pipewire builds with 'c_std=gnu99' by default. Recent versions of gcc don't issue this warning in gnu99 +# mode but it looks like clang still does +CFLAGS:append = " -Wno-typedef-redefinition" + +# Specify linking with -latomic on architectures missing 64bit atomics. +LDFLAGS += "${@bb.utils.contains_any('TUNE_FEATURES', 'riscv32 armv5 mips ppc32 m32', '-latomic', '', d)}" + +# According to wireplumber documentation only one session manager should be installed at a time +# Possible options are media-session, which has fewer dependencies but is very simple, +# or wireplumber, which is more powerful. +PIPEWIRE_SESSION_MANAGER ??= "wireplumber" + +FFMPEG_AVAILABLE = "${@bb.utils.contains('LICENSE_FLAGS_ACCEPTED', 'commercial', 'ffmpeg', '', d)}" +BLUETOOTH_AAC = "${@bb.utils.contains('LICENSE_FLAGS_ACCEPTED', 'commercial', 'bluez-aac', '', d)}" + +PACKAGECONFIG:class-target ??= " \ + ${@bb.utils.contains('DISTRO_FEATURES', 'zeroconf', 'avahi', '', d)} \ + ${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', 'bluez bluez-opus ${BLUETOOTH_AAC}', '', d)} \ + ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd systemd-system-service systemd-user-service', '', d)} \ + ${@bb.utils.filter('DISTRO_FEATURES', 'alsa vulkan pulseaudio', d)} \ + ${PIPEWIRE_SESSION_MANAGER} \ + ${FFMPEG_AVAILABLE} avahi flatpak gstreamer gsettings jack libusb pw-cat raop sndfile v4l2 udev volume webrtc-echo-cancelling libcamera readline \ +" + +# "jack" and "pipewire-jack" packageconfigs cannot be both enabled, +# since "jack" imports libjack, and "pipewire-jack" generates +# libjack.so* files, thus colliding with the libpack package. This +# is why these two are marked in their respective packageconfigs +# as being in conflict. +PACKAGECONFIG[alsa] = "-Dalsa=enabled,-Dalsa=disabled,alsa-lib udev,,pipewire-alsa pipewire-alsa-card-profile" +PACKAGECONFIG[avahi] = "-Davahi=enabled,-Davahi=disabled,avahi" +PACKAGECONFIG[bluez] = "-Dbluez5=enabled,-Dbluez5=disabled,bluez5 sbc" +PACKAGECONFIG[bluez-aac] = "-Dbluez5-codec-aac=enabled,-Dbluez5-codec-aac=disabled,fdk-aac" +PACKAGECONFIG[bluez-opus] = "-Dbluez5-codec-opus=enabled,-Dbluez5-codec-opus=disabled,libopus" +PACKAGECONFIG[bluez-lc3] = "-Dbluez5-codec-lc3=enabled,-Dbluez5-codec-lc3=disabled,liblc3" +# From the pipewire git log: +# "Some Linux phones doesn't use oFono but ModemManager to control the modem." +# This packageconfig enables modemmanager specific code in the BlueZ backend. +PACKAGECONFIG[bluez-backend-native-mm] = "-Dbluez5-backend-native-mm=enabled,-Dbluez5-backend-native-mm=disabled,modemmanager" +PACKAGECONFIG[docs] = "-Ddocs=enabled,-Ddocs=disabled,doxygen-native graphviz-native" +PACKAGECONFIG[ffmpeg] = "-Dffmpeg=enabled,-Dffmpeg=disabled,ffmpeg" +PACKAGECONFIG[flatpak] = "-Dflatpak=enabled,-Dflatpak=disabled,glib-2.0" +PACKAGECONFIG[gsettings] = "-Dgsettings=enabled,-Dgsettings=disabled,glib-2.0" +PACKAGECONFIG[gstreamer] = "-Dgstreamer=enabled,-Dgstreamer=disabled,glib-2.0 gstreamer1.0 gstreamer1.0-plugins-base,,gstreamer1.0-pipewire" +PACKAGECONFIG[jack] = "-Djack=enabled,-Djack=disabled,jack,,,pipewire-jack" +PACKAGECONFIG[libcamera] = "-Dlibcamera=enabled,-Dlibcamera=disabled,libcamera libdrm" +PACKAGECONFIG[libcanberra] = "-Dlibcanberra=enabled,-Dlibcanberra=disabled,libcanberra" +PACKAGECONFIG[libusb] = "-Dlibusb=enabled,-Dlibusb=disabled,libusb" +PACKAGECONFIG[media-session] = ",,,pipewire-media-session,,wireplumber" +PACKAGECONFIG[pulseaudio] = "-Dlibpulse=enabled,-Dlibpulse=disabled,pulseaudio,,pipewire-pulse" +PACKAGECONFIG[pipewire-alsa] = "-Dpipewire-alsa=enabled,-Dpipewire-alsa=disabled,alsa-lib" +PACKAGECONFIG[pipewire-jack] = "-Dpipewire-jack=enabled -Dlibjack-path=${libdir}/${PW_MODULE_SUBDIR}/jack,-Dpipewire-jack=disabled,jack,,pipewire-jack,jack" +PACKAGECONFIG[pw-cat] = "-Dpw-cat=enabled,-Dpw-cat=disabled" +PACKAGECONFIG[raop] = "-Draop=enabled,-Draop=disabled,openssl" +# Starting with version 0.3.60, readline usage can be turned off in pw-cli. +# If it is disabled, getline() is used as a fallback. +PACKAGECONFIG[readline] = "-Dreadline=enabled,-Dreadline=disabled,readline" +PACKAGECONFIG[sdl2] = "-Dsdl2=enabled,-Dsdl2=disabled,libsdl2" +PACKAGECONFIG[sndfile] = "-Dsndfile=enabled,-Dsndfile=disabled,libsndfile1" +PACKAGECONFIG[systemd] = "-Dsystemd=enabled,-Dsystemd=disabled,systemd" +PACKAGECONFIG[systemd-system-service] = "-Dsystemd-system-service=enabled,-Dsystemd-system-service=disabled,systemd" +# "systemd-user-service" packageconfig will only install service +# files to rootfs but not enable them as systemd.bbclass +# currently lacks the feature of enabling user services. +PACKAGECONFIG[systemd-user-service] = "-Dsystemd-user-service=enabled,-Dsystemd-user-service=disabled,systemd" +# pw-cat needs sndfile packageconfig to be enabled +PACKAGECONFIG[udev] = "-Dudev=enabled,-Dudev=disabled,udev" +PACKAGECONFIG[v4l2] = "-Dv4l2=enabled,-Dv4l2=disabled,udev" +PACKAGECONFIG[volume] = "-Dvolume=enabled,-Dvolume=disabled" +PACKAGECONFIG[vulkan] = "-Dvulkan=enabled,-Dvulkan=disabled,vulkan-headers vulkan-loader" +PACKAGECONFIG[webrtc-echo-cancelling] = "-Decho-cancel-webrtc=enabled,-Decho-cancel-webrtc=disabled,webrtc-audio-processing-1" +PACKAGECONFIG[wireplumber] = ",,,wireplumber,,media-session" + +PACKAGESPLITFUNCS:prepend = " split_dynamic_packages " +PACKAGESPLITFUNCS:append = " set_dynamic_metapkg_rdepends " + +SPA_SUBDIR = "spa-0.2" +PW_MODULE_SUBDIR = "pipewire-0.3" + +remove_unused_installed_files() { + # jack.conf is used by pipewire-jack (not the JACK SPA plugin). + # Remove it if pipewire-jack is not built to avoid creating the + # pipewire-jack package. + if ${@bb.utils.contains('PACKAGECONFIG', 'pipewire-jack', 'false', 'true', d)}; then + rm -f "${D}${datadir}/pipewire/jack.conf" + fi + + # minimal.conf is an example of how to minimally configure the + # daemon and is not meant to be used for production. + rm -f "${D}${datadir}/pipewire/minimal.conf" +} + +do_install[postfuncs] += "remove_unused_installed_files" + +python split_dynamic_packages () { + # Create packages for each SPA plugin. These plugins are located + # in individual subdirectories, so a recursive search is needed. + spa_libdir = d.expand('${libdir}/${SPA_SUBDIR}') + do_split_packages(d, spa_libdir, r'^libspa-(.*)\.so$', d.expand('${PN}-spa-plugins-%s'), 'PipeWire SPA plugin for %s', extra_depends='', recursive=True) + + # Create packages for each PipeWire module. + pw_module_libdir = d.expand('${libdir}/${PW_MODULE_SUBDIR}') + do_split_packages(d, pw_module_libdir, r'^libpipewire-module-(.*)\.so$', d.expand('${PN}-modules-%s'), 'PipeWire %s module', extra_depends='', recursive=False) +} + +python set_dynamic_metapkg_rdepends () { + import os + import oe.utils + + if bb.data.inherits_class('nativesdk', d) or bb.data.inherits_class('native', d): + return + + # Go through all generated SPA plugin and PipeWire module packages + # (excluding the main package and the -meta package itself) and + # add them to the -meta package as RDEPENDS. + + base_pn = d.getVar('PN') + + spa_pn = base_pn + '-spa-plugins' + spa_metapkg = spa_pn + '-meta' + + pw_module_pn = base_pn + '-modules' + pw_module_metapkg = pw_module_pn + '-meta' + + d.setVar('ALLOW_EMPTY:' + spa_metapkg, "1") + d.setVar('FILES:' + spa_metapkg, "") + + d.setVar('ALLOW_EMPTY:' + pw_module_metapkg, "1") + d.setVar('FILES:' + pw_module_metapkg, "") + + blacklist = [ spa_pn, spa_metapkg, pw_module_pn, pw_module_metapkg ] + spa_metapkg_rdepends = [] + pw_module_metapkg_rdepends = [] + pkgdest = d.getVar('PKGDEST') + + for pkg in oe.utils.packages_filter_out_system(d): + if pkg in blacklist: + continue + + is_spa_pkg = pkg.startswith(spa_pn) + is_pw_module_pkg = pkg.startswith(pw_module_pn) + if not is_spa_pkg and not is_pw_module_pkg: + continue + + if pkg in spa_metapkg_rdepends or pkg in pw_module_metapkg_rdepends: + continue + + # See if the package is empty by looking at the contents of its + # PKGDEST subdirectory. If this subdirectory is empty, then then + # package is empty as well. Empty packages do not get added to + # the meta package's RDEPENDS. + pkgdir = os.path.join(pkgdest, pkg) + if os.path.exists(pkgdir): + dir_contents = os.listdir(pkgdir) or [] + else: + dir_contents = [] + is_empty = len(dir_contents) == 0 + if not is_empty: + if is_spa_pkg: + spa_metapkg_rdepends.append(pkg) + if is_pw_module_pkg: + pw_module_metapkg_rdepends.append(pkg) + + d.setVar('RDEPENDS:' + spa_metapkg, ' '.join(spa_metapkg_rdepends)) + d.setVar('DESCRIPTION:' + spa_metapkg, spa_pn + ' meta package') + + d.setVar('RDEPENDS:' + pw_module_metapkg, ' '.join(pw_module_metapkg_rdepends)) + d.setVar('DESCRIPTION:' + pw_module_metapkg, pw_module_pn + ' meta package') +} + +PACKAGES =+ "\ + libpipewire \ + ${PN}-tools \ + ${PN}-pulse \ + ${PN}-alsa \ + ${PN}-jack \ + ${PN}-spa-plugins \ + ${PN}-spa-plugins-meta \ + ${PN}-spa-tools \ + ${PN}-modules \ + ${PN}-modules-meta \ + ${PN}-alsa-card-profile \ + ${PN}-v4l2 \ + ${PN}-aes67 \ + gstreamer1.0-pipewire \ +" + +PACKAGES_DYNAMIC = "^${PN}-spa-plugins.* ^${PN}-modules.*" +PACKAGES_DYNAMIC:class-native = "" + +SYSTEMD_SERVICE:${PN} = "${@bb.utils.contains('PACKAGECONFIG', 'systemd-system-service', 'pipewire.service', '', d)}" +CONFFILES:${PN} += "${datadir}/pipewire/pipewire.conf" +FILES:${PN} = " \ + ${datadir}/pipewire \ + ${systemd_system_unitdir}/pipewire* \ + ${systemd_user_unitdir} \ + ${bindir}/pipewire \ + ${bindir}/pipewire-avb \ + ${bindir}/pipewire-vulkan \ +" + +RRECOMMENDS:${PN}:class-target += " \ + pipewire-modules-meta \ + pipewire-spa-plugins-meta \ +" + +FILES:${PN}-dev += " \ + ${libdir}/${PW_MODULE_SUBDIR}/jack/libjack*.so \ +" + +CONFFILES:libpipewire += "${datadir}/pipewire/client.conf" +FILES:libpipewire = " \ + ${datadir}/pipewire/client.conf \ + ${libdir}/libpipewire-*.so.* \ +" +# Add the bare minimum modules and plugins required to be able +# to use libpipewire. Without these, it is essentially unusable. +RDEPENDS:libpipewire += " \ + ${PN}-modules-client-node \ + ${PN}-modules-protocol-native \ + ${PN}-spa-plugins-support \ +" + +FILES:${PN}-tools = " \ + ${bindir}/pw-cat \ + ${bindir}/pw-cli \ + ${bindir}/pw-config \ + ${bindir}/pw-container \ + ${bindir}/pw-dot \ + ${bindir}/pw-dsdplay \ + ${bindir}/pw-dump \ + ${bindir}/pw-encplay \ + ${bindir}/pw-link \ + ${bindir}/pw-loopback \ + ${bindir}/pw-metadata \ + ${bindir}/pw-mididump \ + ${bindir}/pw-midiplay \ + ${bindir}/pw-midirecord \ + ${bindir}/pw-mon \ + ${bindir}/pw-play \ + ${bindir}/pw-profiler \ + ${bindir}/pw-record \ + ${bindir}/pw-reserve \ + ${bindir}/pw-top \ +" + +# This is a shim daemon that is intended to be used as a +# drop-in PulseAudio replacement, providing a pulseaudio-compatible +# socket that can be used by applications that use libpulse. +CONFFILES:${PN}-pulse += "${datadir}/pipewire/pipewire-pulse.conf" +FILES:${PN}-pulse = " \ + ${datadir}/pipewire/pipewire-pulse.conf \ + ${systemd_system_unitdir}/pipewire-pulse.* \ + ${systemd_user_unitdir}/pipewire-pulse.* \ + ${bindir}/pipewire-pulse \ +" +RDEPENDS:${PN}-pulse += " \ + ${PN}-modules-protocol-pulse \ +" + +# ALSA plugin to redirect audio to pipewire. +FILES:${PN}-alsa = "\ + ${libdir}/alsa-lib/* \ + ${datadir}/alsa/alsa.conf.d/* \ +" + +# JACK drop-in libraries to redirect audio to pipewire. +CONFFILES:${PN}-jack = "${datadir}/pipewire/jack.conf" +FILES:${PN}-jack = "\ + ${bindir}/pw-jack \ + ${datadir}/pipewire/jack.conf \ + ${libdir}/${PW_MODULE_SUBDIR}/jack/libjack*.so.* \ +" + +# Dynamic SPA plugin packages (see set_dynamic_metapkg_rdepends). +FILES:${PN}-spa-plugins = "" +RRECOMMENDS:${PN}-spa-plugins += "${PN}-spa-plugins-meta" + +FILES:${PN}-spa-plugins-bluez5 += " \ + ${datadir}/${SPA_SUBDIR}/bluez5/* \ +" + +FILES:${PN}-spa-tools = " \ + ${bindir}/spa-* \ +" + +# Dynamic PipeWire module packages (see set_dynamic_metapkg_rdepends). +FILES:${PN}-modules = "" +RRECOMMENDS:${PN}-modules += "${PN}-modules-meta" + +CONFFILES:${PN}-modules-rt = "${datadir}/pipewire/client-rt.conf" +FILES:${PN}-modules-rt += " \ + ${datadir}/pipewire/client-rt.conf \ + ${sysconfdir}/security/limits.d/* \ + " + +CONFFILES:${PN}-modules-filter-chain = "${datadir}/pipewire/filter-chain/*" +FILES:${PN}-modules-filter-chain += " \ + ${datadir}/pipewire/filter-chain/* \ +" + +FILES:${PN}-alsa-card-profile = " \ + ${datadir}/alsa-card-profile/* \ + ${nonarch_base_libdir}/udev/rules.d/90-pipewire-alsa.rules \ +" + +# V4L2 interface emulator for sending/receiving data between PipeWire and V4L2 applications. +FILES:${PN}-v4l2 += " \ + ${bindir}/pw-v4l2 \ + ${libdir}/${PW_MODULE_SUBDIR}/v4l2/libpw-v4l2.so \ +" + +# AES67 is a standard for audio over IP, from the Audio Engineering Society (AES). +FILES:${PN}-aes67 += " \ + ${bindir}/pipewire-aes67 \ +" + +FILES:gstreamer1.0-pipewire = " \ + ${libdir}/gstreamer-1.0/* \ +" + +BBCLASSEXTEND = "native nativesdk" -- cgit v1.2.3-54-g00ecf