summaryrefslogtreecommitdiffstats
path: root/conf
Commit message (Collapse)AuthorAgeFilesLines
* Generalize the naming of the bootfiles deploy directoryJeff Ithier2020-08-061-2/+6
| | | | | | | | | | The raspberry pi 4 variant has a BCM2711 chip, however it still uses the same boot files as the BCM2835 used in previous generations. This change generalizes the naming of the directory generated in the $DEPLOY_DIR to avoid the implication that the files are only meant for the BCM2835. Signed-off-by: Jeff Ithier <ithijme@gmail.com>
* conf/machine/include/rpi-base.inc: Added can1 interface to bspcolin2020-07-231-0/+1
| | | | | | | | | The device tree only supports a single CAN interface. This prevents compatiblity with dual-CAN boards like the PiCAN2 Duo. The mcp2515-can1 device tree blob for overlay was added to RPI_KERNEL_DEVICETREE_OVERLAYS in order to support dual-CAN hats. Signed-off-by: Colin McAllister <colinmca242@gmail.com>
* rpi-base: add SERIAL_CONSOLES_CHECK to default to SERIAL_CONSOLESChristopher Clark2020-07-171-0/+1
| | | | | | | | As per the example in the bsp-guide, and the qemu and other machine configs. Assists when running virtualized, where serial console device can differ. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
* rpi-base.inc: Include modules if IR is enabledLeon Anavi2020-06-241-0/+1
| | | | | | | | | | | | | Add kernel modules gpio-ir and gpio-ir-tx to variable MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_IR is set to 1. Variable ENABLE_IR enables infrared support (for LIRC). This change affects images based on packagegroup-core-boot, including the core-image-minimal image. For other images (based on packagegroup-base) kernel modules are provide through variable MACHINE_EXTRA_RRECOMMENDS. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* rpi-base.inc: Add infrared dtboLeon Anavi2020-06-041-0/+2
| | | | | | | Add device tree binary overlays gpio-ir-tx and gpio-ir-tx to support peripherals for sending and receiving infrared signals. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* rpi-base.inc: Include modules if I2C is enaledLeon Anavi2020-04-281-1/+3
| | | | | | | | | | | | Add kernel modules i2c-dev and i2c-bcm2708 to variable MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_I2C is set to 1. This affects images based on packagegroup-core-boot, including the core-image-minimal image. For other images (based on packagegroup-base) kernel modules are provide through variable MACHINE_EXTRA_RRECOMMENDS. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* rpi-base.inc: Add kernel modules to all imagesLeon Anavi2020-04-151-1/+1
| | | | | | | | | | | | | | Add kernel modules, including i2c-dev and i2c-bcm2708, to variable MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS. This way kernel modules will be present in all images based on packagegroup-core-boot, including the core-image-minimal image. Otherwise, if modules, are in variable MACHINE_EXTRA_RRECOMMENDS they will be added only in images based on packagegroup-base, which does not include the core-image-minimal or core-image-full-cmdline images. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* raspberrypi3: Switch to vc4-fkms-v3d.Drew Moseley2020-04-152-0/+2
| | | | | | This seems to be required to have a functional DSI display. Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
* rpi-base: Drop old dtbo namesKhem Raj2020-04-081-2/+0
| | | | | | | | pi3-disable-bt is renamed to disable-bt and pi3-miniuart-bt is renamed to miniuart-bt in 2014, now with 5.4 these are not recognised anymore and miniuart-bt and disable-bt are already part of RPI_KERNEL_DEVICETREE_OVERLAYS Signed-off-by: Khem Raj <raj.khem@gmail.com>
* rpi-u-boot-scr: Set u-boot-default-script as providerFabio Berton2020-04-031-0/+2
| | | | | | | | | Add u-boot-default-script to the PROVIDES variable to make easier to replace boot script in another layer just by changing PREFERRED_PROVIDER_u-boot-default-script variable. Set rpi-u-boot-scr as the default provider for meta-raspberrypi. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
* rpi-base.conf: add disable-bt.dtbo and miniuart-bt.dtbo overlays.Orne Brocaar2020-03-311-0/+2
| | | | | | Closes #602. Signed-off-by: Orne Brocaar <info@brocaar.com>
* oeqa: Add rpi specific kernel dmesg parserKhem Raj2020-03-171-0/+3
| | | | | | | | These errors are harmless on rpi3/rpi4 [1] [1] https://github.com/raspberrypi/linux/issues/3195 Signed-off-by: Khem Raj <raj.khem@gmail.com>
* layer.conf: add dunfell to compat layerPierre-Jean Texier2020-03-161-1/+1
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* rpi-base.inc: use wic.bz2 for all rpi machines by defaultPierre-Jean Texier2020-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | This change moves the default image for all rpi machines. We moved from rpi-sdimg to wic.bz2. Also enable wic.bmap image generation. From the documentation in [1], Bmaptool is a generic tool for creating the block map (bmap) for a file and copying files using the block map. The idea is that large files, like raw system image files, can be copied or flashed a lot faster and more reliably with bmaptool than with traditional tools, like "dd" or "cp". Example: $: sudo bmaptool copy <image-name>.wic.xz /dev/<your-block-device> [1] - https://github.com/intel/bmap-tools Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* gstreamer1.0-omx: let virtual/libomxil dependency to pull userlandMartin Jansa2020-01-241-0/+3
| | | | | | * and adjust VIRTUAL-RUNTIME_libomxil to pull runtime provider for libomxil Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Add support for PiTFT 2.8" with capacitive touchErik Botö2020-01-141-0/+1
| | | | | | | | Add support for the Adafruit PiTFT Plus 320x240 2.8" TFT with Capacitive Touchscreen, using the same patterns used for the other versions of the PiTFT screens. Signed-off-by: Erik Botö <erik.boto@gmail.com>
* raspberrypi-cm3.conf: drop KBUILD_DEFCONFIG definitionRicardo Salveti2020-01-081-1/+0
| | | | | | | KBUILD_DEFCONFIG should be defined by the kernel recipe instead, such as linux-raspberrypi. Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
* conf/machine: add pci to MACHINE_FEATURES for Pi4Allen Wild2020-01-072-0/+2
| | | | | | | This pulls in the pciutils package (including `lspci`) via packagegroup-base. Signed-off-by: Allen Wild <allenwild93@gmail.com>
* rpi-base.inc: Introduce DISABLE_VC4GRAPHICSAndrei Gherzan2019-09-161-1/+1
| | | | | | | | | | | | Since we enabled vc4graphics by default[1], there is no easy way to disable it if needed. This patch introduces a variable (DISABLE_VC4GRAPHICS) which when set to '1' will not add 'vc4graphics' to MACHINE_FEATURES forcing the old behaviour. One could use it in 'local.conf' for example. [1] https://github.com/agherzan/meta-raspberrypi/pull/417 Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi*.conf: Remove vc4 configuration as we already default to itAndrei Gherzan2019-09-163-3/+0
| | | | | | | | | As of late[1], we defaulted to enabling vc4graphics in MACHINE_FEATURES. Let's cleanup the machine configurations as per this change. [1] https://github.com/agherzan/meta-raspberrypi/pull/417 Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* layer.conf: Add zeus to compatible layersKhem Raj2019-09-041-1/+1
| | | | | | zeus is codename for next 3.0 release Signed-off-by: Khem Raj <raj.khem@gmail.com>
* raspberrypi4-64: Remove the 3G RAM limitationAndrei Gherzan2019-08-151-1/+1
| | | | | | | | | The PCIe bounce buffers were ported[1] in the kernel so we can remove this limitation now. [1] https://github.com/raspberrypi/linux/pull/3144 Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* layer.conf: Add meta-networking to dynamic layersKhem Raj2019-07-281-0/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* raspberrypi4-64.conf: Limit RAM to 3GAndrei Gherzan2019-07-251-1/+1
| | | | | | | | | | | | | | | The PCI controller on the Raspberry Pi 4 acts as a DMA controller and can only address the first 3Gb[1] of the memory space. On 32bit this was addressed by implementing bouncing buffers[2] but this currently has no support for arm64. In order to have working USB, as a workaround, we limit the ram to 3G. Fixes #446 [1] https://github.com/raspberrypi/linux/issues/3093 [2] https://github.com/raspberrypi/linux/blob/rpi-4.19.y/drivers/pci/controller/pcie-brcmstb-bounce.c Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi*: Define ARMSTUB for all machinesAndrei Gherzan2019-07-199-0/+17
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* rpi-base.inc: Enabling open-source vc4graphics driver for all RPI platformsRiyaz2019-07-181-1/+1
| | | | | | | | Vc4graphics enables drm backend on wayland Compositor (weston & westeros) Appending vc4graphics machine feature to use mesa drivers for OpenGL and V4l2 for video. Signed-off-by: Riyaz <Riyaz.l@ltts.com>
* raspberrypi4-64.conf: Remove memory limitationAndrei Gherzan2019-07-181-1/+1
| | | | | | | | We can do this because the kernel now includes a workaround for the DMA issue. https://github.com/raspberrypi/linux/pull/3080 Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi4.conf: The firmware uses kernel7l.img when LPAE is supportedAndrei Gherzan2019-07-161-1/+2
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi4-64.conf: Uboot configuration and drop armstubAndrei Gherzan2019-07-161-2/+8
| | | | | | We drop armstub configuration because the new firmware includes them. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi4.conf: Define uboot defconfigAndrei Gherzan2019-07-161-0/+1
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi4-64.conf: Define a machine feature for armstubsAndrei Gherzan2019-07-041-1/+1
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi4-64.conf: Initial machine configurationAndrei Gherzan2019-07-041-1/+4
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi4-64.conf: Introduce RPi arm64 machineAndrei Gherzan2019-07-041-0/+25
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi4: Use vc4-fkms-v3dAndrei Gherzan2019-06-301-0/+1
| | | | | | | | Currently, we use vc4-kms-v3d as the default overlay for VC4 but this seems to break vc4 at runtime on RPi4. Change this to vc4-fkms-v3d for now as this is the default Raspbian ons as well. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* rpi-base.inc: Include the "fake" KMS dtboAndrei Gherzan2019-06-301-0/+1
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi4.conf: Add initial machine 32 bit configurationAndrei Gherzan2019-06-301-0/+17
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* rpi-base: Rename the rpi0w dtbAndrei Gherzan2019-06-301-1/+1
| | | | | | | | | | This change is following the rename in the kernel: commit 6f91b5dbfdb62a434571a73f2dc15181963e3bea Author: Phil Elwell <phil@raspberrypi.org> Date: Tue May 28 16:36:04 2019 +0100 Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi3.conf: Clarify machine modeAndrei Gherzan2019-06-301-2/+2
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* rpi-base.inc: Include rpi4 dtbAndrei Gherzan2019-06-301-0/+1
| | | | Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* rpi-default-versions: Switch defaults to 4.19Khem Raj2019-05-291-1/+1
| | | | | | | 4.19 is now declared stable, see https://github.com/raspberrypi/linux/issues/2931#issuecomment-494016355 Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi: Switch default back to 4.14.yPaul Barker2019-04-241-1/+1
| | | | | | | | | | The 4.19.y kernel is not yet considered stable upstream as discussed in the following GitHub issues: https://github.com/agherzan/meta-raspberrypi/issues/410 https://github.com/raspberrypi/linux/issues/2931 Signed-off-by: Paul Barker <paul@betafive.co.uk>
* layer.conf: Add warrior to compatible release seriesKhem Raj2019-04-051-1/+1
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* machines: Switch default kernel to 4.19Khem Raj2019-02-241-1/+1
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* dtbo: Remove lirc-rpi overlayKhem Raj2019-02-241-1/+0
| | | | | | kernel 4.19 does not have this overlay Signed-off-by: Khem Raj <raj.khem@gmail.com>
* raspberrypi-cm3.conf: Define it as a stand alone machineAndrei Gherzan2019-02-191-2/+8
| | | | | | | | | As well, define the correct configuration for this machine. Tested this with and without u-boot on CM3 (with internal storage) and CM3+ without internal storage. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* raspberrypi3-64.conf: Use more appropriate tuneKhem Raj2019-02-071-1/+1
| | | | | | | | rpi3 is based on cortex-a53 implementation which is armv8+crc+simd now that OE-Core has the appropriate tunes, switch to using the new tune file, bonus, is that chromium will be more optimized now Signed-off-by: Khem Raj <raj.khem@gmail.com>
* layer.conf: Fix typo for openembedded-layer dynamic layer additionKhem Raj2018-12-201-2/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* rpi-default-providers.inc: use virtual/libgbm instead of libgbmMing Liu2018-12-181-1/+1
| | | | | | This is to be consistent with the latest OE. Signed-off-by: Ming Liu <liu.ming50@gmail.com>
* Add Pican2 supportFabien Lahoudere2018-12-121-0/+1
| | | | | | | | | | | In order to make Pican 2 work, we : - add mcp2515.dto to the overlay list - add a variable to enable it in local.conf - create a udev rule to mount interface http://skpang.co.uk/catalog/pican2-canbus-board-for-raspberry-pi-23-p-1475.html Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
* Add meta-oe to dynamic-layersKhem Raj2018-12-121-0/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-07-23 03:49:06 +0000