summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* linux-ti-mainline: Remove ti-upstream-toolsAndrew Davis2023-04-141-14/+3
| | | | | | | | | | Mainline should test the mainline kernel as it is, not with out-of-tree changes like new DTB/DTBOs. Use only upstream DTB/DTBOs. As that was the last thing provided by ti-upstream-tools, remove it here. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-mainline: Use upstream configs with upstream kernelAndrew Davis2023-04-147-9/+5
| | | | | | | | | | Mainline should test the mainline kernel as it is, not with out-of-tree changes like to the default configuration that one would get when using a stock distro. Use only upstream configuration. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: switch beaglebone and beagle-x15 to bb.org kernel/u-bootDenys Dmytriyenko2023-04-102-0/+8
| | | | | | | | | | | Switch 32-bit beaglebone and beagle-x15 platforms to use linux-bb.org and u-boot-bb.org recipes for simplicity and for additional Beagle-specific features that are added on top of TI reference kernel, such as dynamic management of capes and other OOBE enhancements. Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: beagleplay: add new BeaglePlay platformDenys Dmytriyenko2023-04-104-0/+90
| | | | | | | | | | * Add configs for BeaglePlay Cortex-A53 and Cortex-R5F cores (am62xx SoC family) * Uses corresponding linux-bb.org and u-boot-bb.org recipes * U-boot for now uses a separate branch for BeaglePlay Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* beaglebone-ai64: add new DTBOs, remove duplicate settingsDenys Dmytriyenko2023-04-101-4/+2
| | | | | | | | | * 5.10.162 added 2 new DT overlays * Remove duplicate settings that are already set in SoC config Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-bb.org: use dedicated branch for beaglebone-ai64Denys Dmytriyenko2023-04-101-0/+5
| | | | | | | | | Use dedicated branch for BB-AI64 that includes recent changes for new memory part. Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-bb.org: update to 5.10.162 and dedicated branchesDenys Dmytriyenko2023-04-102-8/+39
| | | | | | | | | | | | * Update both 32 and 64-bit trees to 5.10.162 * Switch from using a common branch that gets periodically rebased to using dedicated per-merge branches * Patch 32-bit defconfig to use LZMA compression instead of LZO, that is being deprecated in OE-Core Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: change from do_image_wic/tar to do_image_completeRyan Eatmon2023-04-0511-21/+21
| | | | | | | | | When trying to support OpenBMC, we found that our use of do_image_wic and do_image_tar for adding depends and mcdepends was too limiting. Moving to do_image_complete is a higher level in the tree that means for any image type the dependencies will be correct. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: BeagleBoard-u-boot switch to GitHub mirrorRobert Nelson2023-04-041-1/+1
| | | | | | | | | BeagleBoard.org use the new u-boot mirror on GitHub https://github.com/beagleboard/u-boot as https://git.beagleboard.org/ easily becomes overloaded Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging: Fix build with gcc13Khem Raj2023-04-042-0/+352
| | | | | | | | | | | Backport a patch from Linux mainline [1] Thanks Martin Jansa for figuring it out. [1] https://github.com/torvalds/linux/commit/f07788079f515 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sgx-ddk-um: fix error in postinst with sysvinit+udevMatthias Schiffer2023-04-031-3/+8
| | | | | | | | | | | | When sysvinit is in DISTRO_FEATURES, the update-rc.d class must only be inherited when the script referenced by INITSCRIPT_NAME actually exists, or the update-rc.d command in the generated postinst script will fail. Reported-by: Denys Dmytriyenko <denis@denix.org> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Davis <afd@ti.com> Acked-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: BeagleBoard switch to GitHub mirrorRobert Nelson2023-03-311-1/+1
| | | | | | | | | BeagleBoard.org's GitLab instance: https://git.beagleboard.org/ easily becomes overloaded, switch to GitHub mirror. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Add 2023.04 in prep for LTS migrationRyan Eatmon2023-03-311-0/+11
| | | | | | | | | | | We are preparing to migrate our u-boot version to 2023.04. As we are still working on the migration, mark the default preference low for this version. We will enable building with this u-boot in a meta-arago brand in the near future. Once the migration is complete, we will remove the 2021.01 u-boot and make this the default. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
* linux-ti-staging: Add 6.1 kernel in prep for LTS migrationRyan Eatmon2023-03-3112-0/+72
| | | | | | | | | | | | We are preparing to migrate our kernel version to 6.1. As we are still working on the migration, mark the default preference low for this version. We will enable building with this kernel in a meta-arago brand in the near future. Once the migration is complete, we will remove the 5.10 kernel and make this the default. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-*: Add filtering for which dtb/dtbo to includeRyan Eatmon2023-03-3120-189/+115
| | | | | | | | | | | | | | | | | | | We often carry more dtbs/dtbos in our kernel than we have upstreamed. The inclusion of all of the dtb/dtbo in the KERNEL_DEVICETREE has become problematic as we start testing the linux-next and 6.1 as part of our LTS migration. To address this issue we are adding in two step method for managing the KERNEL_DEVICETREE. Going forward we will only accept dtb/dtbo in KERNEL_DEVICETREE if it is available in upstream. This way we ensure that the variable is more accurate for whichever kernel you might be looking at. We have also added a new variable KERNEL_DEVICETREE_PREFIX which our kernel recipes will use to auto set KERNEL_DEVICETREE based on what files are in the kernel and not a fixed list in the conf files. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* kernel-fitimage: Add signing of fitImage entries for 5.10 kernelRyan Eatmon2023-03-312-0/+216
| | | | | | | | | | | | | | | | While we are mirgrating to kernel v6.1 and u-boot v2023.04, we want to keep kernel v5.10 and u-boot v2021.01 "working" for anyone looking at kirkstone. One of the items we are looking at changing is the signing of entries in the fitImage. To try and acheive a limited parity with dunfell while we work on the migration, this commit creates a class that implements the logic that was in dunfell and applies that class to the 5.10 kernel. This is a temporary patch that will be remvoed when we remove the 5.10 recipe down the road. This logic will not apply to the 6.1 kernel. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee-os: Only sign files for platforms that support itRyan Eatmon2023-03-301-1/+43
| | | | | | | | We are seeing some testing issues where the new code that signs all of the files at all times is causing issues. So rollback the logic and only sign for platforms that support it. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Only sign files for platforms that support itRyan Eatmon2023-03-301-2/+38
| | | | | | | | We are seeing some testing issues where the new code that signs all of the files at all times is causing issues. So rollback the logic and only sign for platforms that support it. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Fix u-boot configs to match oe-core fitImageRyan Eatmon2023-03-302-1/+151
| | | | | | | | | | | After moving to the oe-core kernel-fitimage.bbclass we found that the dtb names we were searching for did not match. This was due to the KERNEL_DEVICETREE entries including the vendor subdir in the section names of the fitImage file. This patch updates support in 2021 so that we can temporarily get to a stable boot point before starting our LTS migration and changing a lot of things in the recipes. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Fix some syntax issuesRyan Eatmon2023-03-211-2/+2
| | | | | | | Fixing some syntax issues from the last dunfell to kirkstone sync up patch series. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-rtos-firmware: numerous fixes and cleanupsDenys Dmytriyenko2023-03-201-32/+31
| | | | | | | | | | | | | | | | | | | | | | Doing multiple do_install:prepend overrides does not guarantee the order - it was observed that signing could fail as it was happening prior to symlinking to the correct name. Move signing code inside the main do_install, so the machine-specific do_install:prepend works correctly. Also, pass -f flag for symlinking, otherwise it could fail with "file already exists" error when trying to re-build the recipe again. Several IPC list/matrix fixes: * j721e was missing MCU_1_1_FW entry * j721s2 was also missing MCU_1_1_FW entry * j721s2 had a second MCU_2_0_FW in place of MCU_3_0_FW * j784s4 was missing MCU_4_0_FW and MCU_4_1_FW entries Other minor cleanups and indentation fixes. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging: update to the latest from DunfellDenys Dmytriyenko2023-03-202-4/+4
| | | | | | | Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: update to the latest from DunfellDenys Dmytriyenko2023-03-201-1/+1
| | | | | | | Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: update to the latest from DunfellDenys Dmytriyenko2023-03-201-2/+2
| | | | | | | Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-k3-secdev: update to the latest from DunfellDenys Dmytriyenko2023-03-201-1/+1
| | | | | | | Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add overlay for second CPSW3G PortSiddharth Vadapalli2023-03-201-0/+1
| | | | | | | | | | | | | The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A-SK board supports RGMII mode. Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the Add-On Ethernet Card. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add MCSPI loopback overlay for J784S4Vaishnav Achath2023-03-201-0/+1
| | | | | | | | | | | | Add the MCSPI loopback overlay file for J784S4 EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add MCSPI loopback overlay for J721S2Vaishnav Achath2023-03-201-0/+1
| | | | | | | | | | | | Add the MCSPI loopback overlay file for J721S2 EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Add MCSPI loopback overlay for J721EVaishnav Achath2023-03-201-0/+1
| | | | | | | | | | | | Add the MCSPI loopback overlay file for J721E EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add uarts overlay for J784S4Bhavya Kapoor2023-03-201-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J784S4 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add uarts overlay for J721S2Bhavya Kapoor2023-03-201-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J721S2 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Add uarts overlay for J721EBhavya Kapoor2023-03-201-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J721E SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7200-evm: Add uarts overlay for J7200Bhavya Kapoor2023-03-201-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J7200 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add camera overlays for J784S4 EVMVaishnav Achath2023-03-201-0/+2
| | | | | | | | | | | | Add the following overlay files on J784S4 EVM: 1. Fusion board (For FPDLink-III cameras) 2. OV5640 camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add camera overlays for J721S2 EVMVaishnav Achath2023-03-201-0/+2
| | | | | | | | | | | | Add the following overlay files on J721S2 EVM: 1. Fusion board (For FPDLink-III cameras) 2. OV5640 camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Add camera overlays for J721E EVMVaishnav Achath2023-03-201-0/+21
| | | | | | | | | | | | | Add the following overlay files on J721E EVM: 1. Fusion board (For FPDLink-III cameras) 2. IMX390 FPDLink camera module 3. IMX219 RPi-compatible camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7200-evm: Add MCSPI loopback overlay for J7200Vaishnav Achath2023-03-201-0/+1
| | | | | | | | | | Add the MCSPI loopback overlay file for J7200 EVM which helps users to enable MCU-MAIN MCSPI loopback applications. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add ehrpwm overlay for am69-skDasnavis Sabiya2023-03-201-0/+1
| | | | | | | | | | The AM69 SK has PWM output pins connected to its RPi header. Add overlay file to enable PWM pins. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx-lp-evm: Add OLDI Panel overlayAradhya Bhatia2023-03-201-0/+1
| | | | | | | | | | Add the Microtips OLDI Panel DT overlay for AM62 LP SK. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add ehrpwm overlay for am68-skSinthu Raja2023-03-201-0/+1
| | | | | | | | | | The AM68 SK has PWM output pins connected to its RPi headers. Add overlay file to enable PWM pins. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add FPDLink overlays for AM69 SKDasnavis Sabiya2023-03-201-0/+17
| | | | | | | | | | | | Add the overlay files for AM69 SK: 1. Fusion board (For FPDLink-III cameras). 2. IMX390 FPDLink-III camera module that includes both the CM and RCM type of modules. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add FPDLink overlays for am68-skSinthu Raja2023-03-201-0/+17
| | | | | | | | | | | | | Add the overlay files, over AM68 SK, for the following: 1. Fusion board (For FPDLink-III cameras). 2. IMX390 FPDLink-III camera module which includes both the CM and RCM type of modules. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Fix DTB overlay extension for OV5640Sinthu Raja2023-03-201-1/+1
| | | | | | | | | | | The extension for OV5640 overlay is incorrect. Therefore, update the correct extension to build the overlay with .dtbo Fixes: f67e9805 ("conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREE") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add AM69 SK specific dtb and dtbo to KERNEL_DEVICETREEDasnavis Sabiya2023-03-201-0/+4
| | | | | | | | | | | | | | | | | | | AM69 Starter Kit is a single board designed based on TI's AM69 SOC providing advanced system integration in automotive ADAS applications, autonomous mobile robot and edge AI applications. Add support for the same to include the board dtb file into the root filesystem. Add DT overlays support for the following features on AM69 SK: * Add DTBO entry to support OV5640 camera * Add DTBO entry to support RPi(IMX219) camera * Add DTBO entry for the DDR memory carveout. [1]:https://www.ti.com/lit/zip/spruj52 Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add overlays for IMX390 camerasJai Luthra2023-03-201-0/+8
| | | | | | | | | | | | | | IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally targeted for J7-based devices, but AM62A can re-use the existing overlays. Both the CM and RCM type of modules are supported. As AM62A only has one CSI-RX port, we only use 4 out of the 8 total FPDLink ports on the fusion board. Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREESinthu Raja2023-03-201-0/+4
| | | | | | | | | | | | | | | | AM68 Starter Kit is a low cost, small form factor board designed for TI's AM68/J721S2 SoC[1] which is optimized to provide best in class performance for industrial applications. Add DTB entry for the same. AM68 SK features camera support with MIPI(OV5640) and RPi(IMX219) connectors. Add DTBO for the same. Also, add DTBO entry for the DDR memory carveout. [1]:http://www.ti.com/lit/zip/spruj28 Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add camera overlays for AM62A SKJai Luthra2023-03-201-0/+6
| | | | | | | | | | | | | Add the following overlay files on AM62A SK: 1. Fusion board (For FPDLink-III cameras) 2. OV2312 FPDLink camera module 3. IMX219 RPi-compatible camera module Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx: Add missing overlays for AM625 SKAradhya Bhatia2023-03-201-0/+5
| | | | | | | | | | | | | | | Add the overlay files, over AM625 SK, for the following: 1. Technexion OV5640 Camera 2. Enhanced Capture (ECAP) 3. HDMI Audio Output 4. MCAN Transceiver 5. Microtips OLDI Panel Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add support for J784S4 HS-FSDasnavis2023-03-205-2/+62
| | | | | | | | | | | | | Add the basic J784S4 HS-FS configuration. * Add configurations to support both HS-FS and GP keeping GP as default. * Add ti-sci-firmware overrides for HS-FS. * Remove evm conf file inclusion in hs-evm conf. * Add j784s4 hs-evm specific config to hs-evm conf. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62axx-evm: Add AM62A HS-FS evm configurationSai Sree Kartheek Adivi2023-03-207-14/+75
| | | | | | | | | | | | | | | Lets add the basic AM62A configuration - Add machine conf for AM62A. - The wic images will boot on AM62A HS-FS devices by default. - The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively. - Add ti-sci-firmware overrides. - Sign ATF, OPTEE and RTOS Firmware. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-09 19:46:41 +0000