summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* conf: machine: Remove multi-certificate image commentAndrew Davis2023-01-241-2/+0
| | | | | | | Multi-cert is already now the default, no need to add a comment on that. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee-os: sync up with upstream meta-arm updateDenys Dmytriyenko2023-01-241-9/+0
| | | | | | | | Upstream meta-arm has updated optee-os to 3.19 and our local changes conflict with that. Update bbappend to match upstream. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Move legacy HS signing classes into this layerAndrew Davis2023-01-246-0/+932
| | | | | | | | | These were in the meta-arago layer, but any distro should be able to run on HS devices. So move the classes and setup to the BSP layer. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sgx-ddk-um: Update SRCREV for Kirkstone supportAndrew Davis2023-01-241-4/+5
| | | | | Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Add am57xx.inc allowing use of SoC name over full EVM nameAndrew Davis2023-01-249-18/+17
| | | | | | | | | | In many spots we have to use the full EVM name for each EVM using the AM57x SoC leading to missed features on some EVMs. Add the am57xx name so we can generically add for AM57x. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* layer.conf: Add kirkstone, langdale back into LAYERSERIES_COMPATRyan Eatmon2023-01-112-2/+2
| | | | | | | | Rather than just support mickledore we should also support the other layers that we still support to ensure that as many as different versions we can. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* layer.conf: Update LAYERSERIES_COMPAT for mickledoreKhem Raj2023-01-042-2/+2
| | | | | | | | | oe-core switched to mickedore [1] [1] https://git.openembedded.org/openembedded-core/commit/?id=57239d66b933c4313cf331d35d13ec2d0661c38f Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* k3r5: Use the ?= default assignment to allow for overridesRyan Eatmon2023-01-041-3/+3
| | | | | | | | Move to setting the values for PREFERRED_PROVIDER using the ?= default assignment so that we can override the setting if we would like to. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging: Clean up init_disassemble_info() patchRyan Eatmon2022-12-043-222/+4
| | | | | | | | There were fuzz errors with the patch that needed to be cleaned up, and for some reason a v2 that was supposed to move the duplicate patches in files/ was not pushed properly before merging. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee: drop 3.17 versionsDenys Dmytriyenko2022-12-014-9/+0
| | | | | | | | | These bbappends were bumping versions to 3.17 when upstream only provided 3.16 version. Now that upstream meta-arm provides 3.18 versions, there's no need for the bbappends, especially since they break in do_install. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ffa-debugfs-mod: Remove bbappendKhem Raj2022-12-011-5/+0
| | | | | | | The main recipe in meta-arm is gone with 5.19 kernel onwards Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: make dependency on meta-ti-extras softDenys Dmytriyenko2022-12-011-2/+2
| | | | | | | | | | | | | | | | | | Replace "require" with "include" to load ti-paths.inc and not break parsing when meta-ti-extras is not in the BBLAYERS list. As ti-paths.inc is only needed to define TI_K3_SECDEV_INSTALL_DIR for ti-k3-secdev when TI_SECURE_DEV_PKG_K3 is not set and building for K3 HS platforms. Since ti-k3-secdev resides in meta-ti-extras, the soft dependency will still work fine and give a build error "Nothing PROVIDES 'ti-k3-secdev-native'" when it is needed. Also, since TI_K3_SECDEV_INSTALL_DIR can now be undefined, use d.getVar() to access it ensuring it doesn't break the condition. Reported-by: Daniel Díaz <mrchapp@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging: work around for too few arguments to function ↵Ryan Eatmon2022-11-274-0/+328
| | | | | | | | | | | | | | | | | | | | | init_disassemble_info() error binutils 2.39 changed the signature of init_disassemble_info(), which now causes perf and bpftool to fail to compile. Relevant binutils commit: [1] There is a proper fix in development upstream[2]. This is a work-around for older kernels. Inspired by a patch by Anton Antonov to fix this issue on meta-arm kernels. [3] [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=60a3da00bd5407f07d64dff82a4dae98230dfaac [2] https://patchwork.kernel.org/project/netdevbpf/cover/20220801013834.156015-1-andres@anarazel.de/ [3] https://patchwork.yoctoproject.org/project/arm/patch/20220824025819.4888-1-jon.mason@arm.com/#5104 Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-unpack: Remove update_data callRyan Eatmon2022-11-251-1/+0
| | | | | | | | | update_data() was removed from upstream bitbake, so we should remove the call from our code as well. https://github.com/openembedded/bitbake/commit/584989ed2b5af4e8799571dece0cf94f995ef14e Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee-os: Remove 3.18 patches from our 3.19 recipeRyan Eatmon2022-11-231-0/+6
| | | | | | | | These patches are from upstream against v3.18, but we moved to v3.19 and the patches are now invalid. These can be removed once upstream moves up to or beyond v3.19. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf/machine/omapl138: correct few of the machine settingsDenys Dmytriyenko2022-11-237-35/+13
| | | | | | | | | | | | Cleanup and unify again - omapl138-lcdk is the only platform supported in the OMAP-L1 family. Plus there's no longer DaVinci family with corresponding settings. Adjust accordingly. Please note, there's currently a bug building Rust on ARMv5 platforms: https://bugzilla.yoctoproject.org/show_bug.cgi?id=14967 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cmem-mod: Remove CMEM kernel moduleAndrew Davis2022-11-2313-431/+0
| | | | | | | | | | | | | | CMEM has been deprecated for removal for some time now. All users should have migrated to the Linux upstream DMA-BUF Heaps framework. Remove CMEM. We only remove the kernel module part in this patch to prevent builds from breaking in the meta-arago layer due to dependencies on the CMEM library. These packages should either be updated or disabled. After that we will remove the library. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee-os: Upgrade to upstream 3.19.0Praneeth Bajjuri2022-11-231-2/+2
| | | | | | | | | Update to the latest upstream master which is 3.19.0. Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-driver: Bump the source revisionRandolph Sapp2022-11-231-1/+1
| | | | | | | | | | | | | Bump the source revision for the rogue pvr kernel module. Source changelog: - A hack was added to increase stability on J7 platforms while we are looking into a proper fix for cache coherency issues in this module Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: use getVar() to check if TI_SECURE_DEV_PKG_K3 is definedDenys Dmytriyenko2022-11-231-1/+1
| | | | | | | | | Otherwise undefined variable is returned literally as ${TI_SECURE_DEV_PKG_K3} and the condition won't work. Cc: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-k3-secdev: include ti-paths.incDenys Dmytriyenko2022-11-231-0/+2
| | | | | | | | | Include ti-paths.inc so TI_K3_SECDEV_INSTALL_DIR_RECIPE gets defined and artifacts are installed in the correct location. Cc: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging: update to the latestDenys Dmytriyenko2022-11-232-4/+4
| | | | | | | This matches current version in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: update to the latestDenys Dmytriyenko2022-11-231-1/+1
| | | | | | | This matches current version in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: update to the latestDenys Dmytriyenko2022-11-231-2/+2
| | | | | | | This matches current version in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cnm-wave-fw: update firmware name to wave521c_k3_codec_fw.binRyan Eatmon2022-11-231-3/+1
| | | | | | | | | | | | | update firmware name to wave521c_k3_codec_fw.bin to align with linux-firmware main branch. the following patch is part of ti-linux-firmware thru mainline sync. commit 48407ffd ("cnm: update chips&media wave521c firmware.") Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee-os: Enable TRNG driver as OP-TEE support is addedJayesh Choudhary2022-11-231-1/+0
| | | | | | | | | | OP-TEE upstream now has support for sa3ul for j721s2 platform. Re-enable the trng driver which was disabled earlier. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add OP-TEE flavourJayesh Choudhary2022-11-231-0/+1
| | | | | | | | | | | Change the OP-TEE flavour from default k3-j721e to k3-j784s4 as sa3ul support for j784s4 is upstreamed in OP-TEE and we can use the same settings in j721s2 to access TRNG. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add OP-TEE flavourJayesh Choudhary2022-11-231-0/+1
| | | | | | | | | | | Add the new OP-TEE flavour for J784S4 instead of default k3-j721e. The TI-SCI ID for MCU domain sa2ul/sa3ul are not the same for J721E and J784S4. So a new flavour is added in upstream OP-TEE. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee-os: Update SRCREV for OP-TEE TRNG in J784S4Jayesh Choudhary2022-11-231-1/+1
| | | | | | | | | | Update the SRCREV to the commit when sa3ul support was added in upstream OP-TEE for J784S4 platform to access rng. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* j721s2 and j784s4: Correct serial console deviceRyan Eatmon2022-11-232-2/+2
| | | | | | | | | | | | | Serial console in J721S2/J784S4 EVM config was set to ttyS10. It should be ttyS2. This caused sysv based systems (eg, tiny) to apparently hang because of no login prompt. This didn't show up as a problem on systemd systems (eg, default) because systemd will automatically setup a serial tty with the console option passed in on the kernel command line (using console=...), which U-Boot correctly passes in as ttyS2 for J721S2/J784S4. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-driver: drop local patch as upstream is now fixedDenys Dmytriyenko2022-11-232-35/+0
| | | | | Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-*: Bump the graphics recipesRandolph Sapp2022-11-232-7/+3
| | | | | | | | | | | Bump the graphics recipes source revision and remove the old BVNC switch. The BVNC is now baked into the platform Makefile that is selected with PVR_BUILD_DIR / TARGET_PRODUCT. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Update to latest upstream masterAndrew Davis2022-11-231-1/+1
| | | | | | | | | Notable changes include support for J784s4. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add j784s4-evm configuration.Ryan Eatmon2022-11-239-6/+123
| | | | | | | | | | | | | | | Adding support for j784s4-evm: - Add configurations. - Add firmware. - Add u-boot. - Add gpu support. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-driver: Fix git SRC_URIRyan Eatmon2022-11-231-1/+1
| | | | | | | | | We missed a spot when updating all of the git access for git.ti.com to use HTTPS. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ipc: ti-rpmsg-char: Update library to 0.5.1Praneeth Bajjuri2022-11-231-3/+3
| | | | | | | | | | Update the ti-rpmsg-char library to 0.5.1 version that enables the support for R5F on am62x SoCs. Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-rtos-firmware: j721s2-hs-evm: add secure firmware imagesManorit Chawdhry2022-11-231-0/+49
| | | | | | | | | Adds support for secure firmware images in J721S2 HS EVM. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-rtos-firmware: j7200-hs-evm: add secure firmware imagesManorit Chawdhry2022-11-231-0/+28
| | | | | | | | | Adds support for secure firmware images in J7200 HS EVM. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-rtos-firmware: j721e-hs-evm: add secure firmware imagesManorit Chawdhry2022-11-231-1/+79
| | | | | | | | | Adds support for secure firmware images in J721E HS EVM. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-mainline: unbreak devtoolDenys Dmytriyenko2022-11-231-3/+3
| | | | | | | | | | | | | | | | | | devtool has a long-standing bug where it cannot handle references to ${WORKDIR} due to externalsrc: https://bugzilla.yoctoproject.org/show_bug.cgi?id=12677 linux-ti-mainline clones additional ti-upstream-tools repo alongside the kernel sources into ${WORKDIR}, which exposes this devtool bug. Work around the issue by moving ti-upstream-tools inside the kernel source tree, i.e. inside ${S} Reported-by: Radoslav Pesek <radoslav.pesek@microstep-mis.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx: Move multi-config targets into base SoC includeAndrew Davis2022-11-232-12/+13
| | | | | | | | | | | The supported device types depends on the SoC, not on any specific board or EVM. Any board can be populated with any of the 3 supported AM64x types. Move these into the AM64x common include. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx-evm: Switch to SR2.0 HS-FS build by defaultAndrew Davis2022-11-237-19/+48
| | | | | | | | | | | | | | | AM64x devices will only be available as SR2.0 HS-FS. Set this as the default type provided by the SDK. To allow SR2.0 HS-SE to continue to boot, like we did with GP, we add an extra machine to build SR2.0 HS-SE SYSFW. To use on SR2.0 HS-SE boards simply switch out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am64x_sr2-hs-evm.bin tiboot3.bin Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cadence-mhdp-fw: Add dependency for j721s2Rahul T R2022-11-232-1/+2
| | | | | | | | | | cdns mhdp bridge is present in j721s2 soc. Add the dependency for the same Signed-off-by: Rahul T R <r-ravikumar@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use d.getVar() in DEPENDS expressionRandolph Sapp2022-11-231-1/+1
| | | | | | | | | | | | Switch the DEPENDS_append expression to use d.getVar() instead of the usual variable expansion to prevent the inline Python command from becoming mangled. Signed-off-by: Randolph Sapp <rs@ti.com> Acked-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee-os: Lower log level for AM62xAndrew Davis2022-11-231-1/+1
| | | | | | | | | | | | | | During resume from low power mode suspend OP-TEE prints some messages on the UART. It seems this UART is not powered at this point in the sequence breaking suspend/resume. We should track down the exact prints and quiet them. Until we get that fix upstream, lets lower the log level for this platform to unblock the LPM work. Signed-off-by: Andrew Davis <afd@ti.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee-os: Upgrade to upstream 3.18.0Andrew Davis2022-11-231-4/+2
| | | | | | | | | | Update to the latest upstream master which is 3.18.0. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: add am62xx-lp-evm configurationAnand Gadiyar2022-11-235-3/+30
| | | | | | | | | | | | | | | This platform is similar to the currently supported am62xx-evm, except that we currently need new defconfigs for u-boot and new dtbs in the filesystem. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Hari Nagalla <hnagalla@ti.com> Cc: Andrew Davis <afd@ti.com> Cc: Praneeth Bajjuri <praneeth@ti.com> Cc: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx-evm: Update default HS namesAndrew Davis2022-11-231-4/+0
| | | | | | | | | | | In the latest U-Boot the HS images for AM64x have been renamed to the default names, and the GP have been changed to *_unsigned. Remove the overrides to pull the now default HS images. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* all: Stop using git://git.ti.comRyan Eatmon2022-11-2336-55/+55
| | | | | | | | | | | | Stop using un-encrypted git:// protocol to access TI repositories. This is inline with the same arguments as made by github in https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx-evm: Make HS-SE the defaultAndrew Davis2022-11-2310-53/+33
| | | | | | | | | | | | The HS-SE AM64xx machine can now be run on GP devices and built without needing the TI_SECURE_DEV_PKG for the same. AM64xx will only be available in the HS-FS type going forward. Make the HS-SE the default and remove the original GP machine. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-09 23:26:33 +0000