summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ti-sgx-ddk-um: avoid unnecessary dependency on -dev packageMatthias Schiffer2022-05-021-1/+1
| | | | | | | | | | | | | | | | | | ti-sgx-ddk-um's do_install creates a symlink libGLESv2.so.1 to libGLESv2.so. As this symlink will be installed to ti-sgx-ddk-um, but its target libGLESv2.so is in ti-sgx-ddk-um-dev, the automated dependency analysis will add ti-sgx-ddk-um-dev to ti-sgx-ddk-um's RDEPENDS. This will pull in a large number of other -dev packages through RDEPENDS and RRECOMMENDS in turn. Avoid this by having libGLESv2.so.1 point to libGLESv2.so.2 instead of libGLESv2.so, so the symlink's target is in ti-sgx-ddk-um as well. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: Enable bmap file for wic images on legacy platformsJonathan Humphreys2022-05-023-3/+3
| | | | | | | | | | To allow a consistent experience across current devices, enable wic.bmap file generation for AM3/4/5 images. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* wlconf: Use nonarch_base_libdir instead of hardcoding /libKhem Raj2022-04-261-3/+3
| | | | | | | Helps with usrmerge builds Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* uim-sysfs: Specify branch and protocol for git fetcherKhem Raj2022-04-051-1/+1
| | | | | | | | bitbake git fetcher warns about protocol and fall back branches therefore be explicit about these parameters in source uri Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* wl18xx-fw: Make it support usrmergeAlessio Igor Bogani2022-04-051-2/+6
| | | | | Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-cgt-pru: Update to version 2.3.3Alessio Igor Bogani2022-03-301-4/+4
| | | | | Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sgx-ddk-um: only the am65xx member of the k3 family is supportedAndrew Davis2022-03-291-2/+2
| | | | | | | | | The AM65xx is the only member of the K3 family with an SGX GPU. Be specific here to avoid confusion. Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-umlibs: only the j721e SoC is currently supportedAndrew Davis2022-03-291-1/+1
| | | | | | | | | There are now three SoCs in the J7 family, but only the j721e variant is currently supported. Be specific here. Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: add SoC families for the J7 SoCsAndrew Davis2022-03-296-5/+11
| | | | | | | | | | This allows us to be more specific around what SoCs we support and lets us add features based on the SoC family not just at the EVM or whole J7family level. Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: rename j7-evm to j721e-evmAndrew Davis2022-03-299-19/+19
| | | | | | | | | | | | | | | | In many places we use "j7" the family when we should be using a specific SoC or EVM and vice-versa. For instance when including graphics drivers we add for all "j7" family, but what we really want is only for some specific j7 SoC. First step in untangling this is to make it clear that there is no SoC called j7. There is a SoC called j721e with a j721e-evm. Fix up this naming here. Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: correct and do not skip "installed-vs-shipped" QA checkDenys Dmytriyenko2022-03-013-4/+5
| | | | | | | | | | | Skipping "installed-vs-shipped" QA check is now considered bad practice due to possible SDK issues and is being flagged by yocto-check-layer [1] script and could affect "Yocto Project Compatible" status for the layer. [1] https://git.openembedded.org/openembedded-core/commit/?id=e8baa75535fc888f1d768b23a0140475e832c910 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: convert licenses to SPDX formatDenys Dmytriyenko2022-02-2521-21/+21
| | | | | | | Update LICENSE variable to use SPDX license identifiers. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: add README for meta-ti-extras and update maintainerDenys Dmytriyenko2022-02-232-1/+32
| | | | | | | | Add README for the newly added meta-ti-extras layer and update the maintainer. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Bump to 08.02.00.003 releaseRyan Eatmon2022-02-221-2/+2
| | | | | | | | Updated the u-boot version for 08.02.00.003 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging-rt: Bump to 08.02.00.003 releaseRyan Eatmon2022-02-221-2/+2
| | | | | | | | Updated the linux rt version for 08.02.00.003 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging: Bump to 08.02.00.003 releaseRyan Eatmon2022-02-221-2/+2
| | | | | | | | Updated the linux version for 08.02.00.003 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: Bump to 08.02.00.003 releaseRyan Eatmon2022-02-221-1/+1
| | | | | | | | Updated the ti-linux-fw version for 08.02.00.003 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: Bump to 08.02.00.002 releaseRyan Eatmon2022-02-221-1/+1
| | | | | | | | Updated the ti-linux-fw version for 08.02.00.002 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Bump to 08.02.00.002 releaseRyan Eatmon2022-02-221-2/+2
| | | | | | | | Updated the u-boot version for 08.02.00.002 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging-rt: Bump to 08.02.00.002 releaseRyan Eatmon2022-02-221-1/+1
| | | | | | | | Updated the linux rt version for 08.02.00.002 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging: Bump to 08.02.00.002 releaseRyan Eatmon2022-02-221-1/+1
| | | | | | | | Updated the linux version for 08.02.00.002 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf/machine/am57xx-evm: add overlay for OV10635 sensorKevin Hilman2022-02-221-0/+1
| | | | | | | | | | | | The VIP camera capture driver recently ported to ti-linux-5.10.y adds a DT overlay for the OV10635 camera sensor. Add this to KERNEL_DEVICTREE so it's added to the artifacts. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cnm-wave-fw: Split firmware name into target and sourceRyan Eatmon2022-02-221-2/+4
| | | | | | | | | | We need to control both the source name of the firmware and the target name, so split the current variable into two and update the install command. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: Bump to 08.02.00.001 releaseRyan Eatmon2022-02-221-3/+3
| | | | | | | | | Updated the ti-linux-fw version for 08.02.00.001 - Changed CORESDK_RTOS_VERSION version to 08.02.00.04 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Bump to 08.02.00.001 releaseRyan Eatmon2022-02-221-2/+2
| | | | | | | | Updated the u-boot version for 08.02.00.001 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging-rt: Bump to 08.02.00.001 releaseRyan Eatmon2022-02-221-1/+1
| | | | | | | | Updated the linux rt version for 08.02.00.001 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-staging: Bump to 08.02.00.001 releaseRyan Eatmon2022-02-221-1/+1
| | | | | | | | Updated the linux version for 08.02.00.001 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ipc: ti-rpmsg-char: Update library to 0.4.0Hari Nagalla2022-02-221-3/+3
| | | | | | | | | | Update the ti-rpmsg-char library to 0.4.0 version that enables the support for j721s2 SoC family remote processors. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Support binman image generationRoger Quadros2022-02-221-1/+1
| | | | | | | | | | | | | | | We are now using binman to generate the images for K3 AM64 in u-boot. tools/binman/binman needs python3-setuptools so add it to DEPENDS. Reported-by: Praneeth Bajjuri <praneeth@ti.com> Suggested-by: Denys Dmytriyenko <denis@denix.org> Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cnm-wave-fw: lock the compatiable machine to j721s2-evmRyan Eatmon2022-02-222-2/+2
| | | | | | | | | The original recipe listed the compatible platforms to all of j7, but at this time it is limited to j721s2-evm. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Revert "ti-sci-fw: Fix for k3-image-gen issue for combined boot images"Praneeth Bajjuri2022-02-223-70/+1
| | | | | | | | | | | | | | This reverts commit d29025f7e868bea6299b55caf78e684fc647be33. * associated fix in k3-image-gen is picked up now. commit 892c86501ff7 ("Makefile: Skip signing of binaries for HS combined boot") hence its no longer needed to carry the same fix from meta-ti here. Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: Bump up TIFS and DM to v2022.01Praneeth Bajjuri2022-02-221-4/+4
| | | | | | | | | | | | Update ti-linux-firmware and k3-image-gen to pick latest TIFS and DM v2022.01 This version also adds support to j721s2 Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cnm-wave-fw: Fix name of firmware for j721s2Ryan Eatmon2022-02-221-5/+6
| | | | | | | | | Update the name of the firmware for j721s2 as the file was renamed. Also, fix a typo in the variable name. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-ti/ti-rtos-bin: Fix unavailable binary pathHari Nagalla2022-02-221-1/+1
| | | | | | | | | | | | Lets fix the missing switch firmware binary to point to ping binary instead. If we attempt to start alternate CPU, we get a very beserk system. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-bsp: Add cnm-wave-fw firmware recipeNishanth Menon2022-02-223-0/+45
| | | | | | | | | | Add firmware recipe to add the Wave521cl firmware pieces in for j7 platform. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipies-ti: ti-rtos-firmware: Fixup typo for rtos firmwareNishanth Menon2022-02-221-8/+8
| | | | | | | Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-bsp/ti-rtos: Define the TARGET and ALTERNATE_TARGET as well.Nishanth Menon2022-02-221-1/+18
| | | | | | | | | Dont forget the alternate-target as well. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-rtos-bin: Add j721s2Nishanth Menon2022-02-221-0/+38
| | | | | | | | | | Lets keep ethernet switch firmware disabled till we can actually integrate it. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-bsp/ti-rtos: Use target_c7x_0 instead of just c7xNishanth Menon2022-02-221-2/+2
| | | | | | | | | Lets enumerate the C7x target instead of defaulting as a since C7x. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Add support for alternate consoleNishanth Menon2022-02-221-0/+2
| | | | | | | | | | | | Actual systems may choose to use a different console from the default Allow the machine configurations to describe the same. Since the option provided is custom to TI K3, make this a k3 product override capability. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* optee-os: Add support for alternate consoleNishanth Menon2022-02-221-0/+2
| | | | | | | | | | | | | Actual systems may choose to use a different console from the default Allow the machine configurations to describe the same. Since the option provided is custom to TI K3, make this a k3 product override capability. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add j721s2 evm configurationNishanth Menon2022-02-224-2/+59
| | | | | | | Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: use nonarch_base_libdir for firmware installationsDenys Dmytriyenko2022-02-2221-246/+246
| | | | | | | | | Firmware images should always be installed under /lib and hence should use nonarch_base_libdir, as regular base_libdir is configuration-specific and doesn't always resolve to /lib. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-rtos-firmware: use nonarch_base_libdir for deploymentAwais Belal2022-02-221-51/+51
| | | | | | | | | | | | | base_libdir is not configuration safe while firmware binaries should always be deployed to /lib. In configurations where base_libdir is not /lib the firmware gets deployed to wrong paths. This is fixed by using the nonarch_base_libdir which is configuration agnostic. Signed-off-by: Awais Belal <awais_belal@mentor.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti33x: move screen feature to machine configsVivien Didelot2022-02-223-6/+3
| | | | | | | | | | | | | | | | | | | | The AM335x SoC has a built-in 16bit/24bit RGB LCD controller, and the BeagleBone Black uses an external chip to convert this to HDMI. But the SoC does not have a video output port per-se, thus the "screen" machine feature does not belong to its configuration but rather to the machine configurations. Move the feature (and the MACHINE_GUI_CLASS definition) out of ti33x.inc into am335x-evm.conf and beaglebone.conf respectively. At the same time, drop the irrelevant comments regarding the external screen, since MACHINE_GUI_CLASS is unlikely used and the BeagleBone Black has a micro HDMI port, not a DVI port. Signed-off-by: Vivien Didelot <vdidelot@pbsc.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* beaglebone: move kernel and dtb to packagegroup-core-bootVivien Didelot2022-02-221-1/+1
| | | | | | | | | | | | | | | | | Require kernel image and device tree as machine-specific packages with MACHINE_ESSENTIAL_EXTRA_RDEPENDS instead of appending IMAGE_INSTALL. This binds the packages to the packagegroup-core-boot package group, allowing one to skip their installation, e.g. for container trees. This patch reflects commit d4cbe0e43393 [1] from meta-yocto-bsp ("beaglebone-yocto: move kernel and dtb to packagegroup-core-boot"). [1] https://git.yoctoproject.org/meta-yocto/commit/?id=d4cbe0e43393ec70e98caf006372b5311597d377 Signed-off-by: Vivien Didelot <vdidelot@pbsc.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: set layer compatibility with kirkstoneDenys Dmytriyenko2022-02-222-2/+2
| | | | | Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: update ambiguous "BSD" license with "BSD-3-Clause"Denys Dmytriyenko2022-02-2218-18/+18
| | | | | | | | | | | OE-Core recently removed ambiguous "BSD" license[1] in order for recipes to be more specific and use the exact variants of BSD. Update meta-ti recipes with "BSD-3-Clause" as that was the previous default. [1] https://git.openembedded.org/openembedded-core/commit/?id=14d4c007c49652d836d325a12bdbcd3bfa42e6d5 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: move beaglebone-specific components to meta-ti-extrasDenys Dmytriyenko2022-02-2216-0/+0
| | | | | | | Move beagleboard.org beaglebone componentns to meta-ti-extras. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: move cuia to meta-ti-extrasDenys Dmytriyenko2022-02-221-0/+0
| | | | | | | | Move TI Unified Instrumentation Architecture in C (cUIA) to meta-ti-extras under recipes-devtools. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-11 15:17:22 +0000