| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FIT_CONF_DEFAULT_DTB config specifies the default dtb file for the FIT
image when multiple ones are provided[1].
Since the variable is not set in current machine configs, the default is
set to the first dtb read during FIT image creation which doesn't give
us direct control over the default configuration.
Therefore this patch adds default dtbs for am62 evms.
[1]:
https://docs.yoctoproject.org/ref-manual/variables.html#term-FIT_CONF_DEFAULT_DTB
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Updated the value(s) for:
am57xx-evm: KERNEL_DEVICETREE
am62axx-evm: KERNEL_DEVICETREE
am62pxx-evm: KERNEL_DEVICETREE
am62xx-evm: KERNEL_DEVICETREE
am62xx-lp-evm: KERNEL_DEVICETREE
am68-sk: KERNEL_DEVICETREE
am69-sk: KERNEL_DEVICETREE
beagleplay: KERNEL_DEVICETREE
am64xx-evm: KERNEL_DEVICETREE
am65xx-evm: KERNEL_DEVICETREE
am335x-evm: KERNEL_DEVICETREE
am437x-evm: KERNEL_DEVICETREE
j7200-evm: KERNEL_DEVICETREE
j721e-evm: KERNEL_DEVICETREE
j721e-sk: KERNEL_DEVICETREE
j721s2-evm: KERNEL_DEVICETREE
j722s-evm: KERNEL_DEVICETREE
j784s4-evm: KERNEL_DEVICETREE
linux-ti-mainline: PV,SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Updated the value(s) for:
am57xx-evm: KERNEL_DEVICETREE
am62axx-evm: KERNEL_DEVICETREE
am62pxx-evm: KERNEL_DEVICETREE
am62xx-evm: KERNEL_DEVICETREE
am62xx-lp-evm: KERNEL_DEVICETREE
am68-sk: KERNEL_DEVICETREE
am69-sk: KERNEL_DEVICETREE
beagleplay: KERNEL_DEVICETREE
am64xx-evm: KERNEL_DEVICETREE
am65xx-evm: KERNEL_DEVICETREE
am335x-evm: KERNEL_DEVICETREE
am437x-evm: KERNEL_DEVICETREE
j7200-evm: KERNEL_DEVICETREE
j721e-evm: KERNEL_DEVICETREE
j721e-sk: KERNEL_DEVICETREE
j721s2-evm: KERNEL_DEVICETREE
j722s-evm: KERNEL_DEVICETREE
j784s4-evm: KERNEL_DEVICETREE
linux-ti-mainline: PV,SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new V3Link camera fusion board [1] comes with a CSI to FPDLink
serializer board, which allows interfacing multiple 22-pin FFC
compatible sensors with SK-AM62A.
Currently overlays for interfacing IMX219 sensor with V3Link are built
as part of the TI linux kernel, so pick these in the BSP filesystem.
[1]: https://www.arducam.com/fpd-link-3-cameras/
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit f5851386 ("conf: machine: am62*: Pick common overlays by prefix")
picks common HDMI and CSI overlays for am62 platform variants.
Adding capability to extend the same prefix for common overlays for applicable
am62 platforms in more generic way to include new mcan overlays added [1]
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=3b01c392627f
given the differences in SK-AM62-LP containing B2B HDMI Samtec connector,
just added the kernel prefix to pick common mcan overlay.
for am62pxx: It has 4 MCANs vs all other am62xx devices have 3 MCANs,
hence keeping this prefix seperate for am62pxx to pick right overlay.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SK boards of AM62 SoC family share peripheral expansions for camera
and audio-over-HDMI.
The HDMI bridge is common across all SK-AM62* boards. The CSI2 FFC
camera connector is common across all except SK-AM62-LP which only has a
B2B Samtec connector.
As the kernel now uses the same prefix "k3-am62x-sk-" for the devicetree
overlays for these peripherals, make sure we pick them by prefix for
applicable boards.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=b50ccab9e07c
Link: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=0432df3d2ae7
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
| |
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
The FPDLink overlays are platform-agnostic, and have been renamed to
match that in the tiL6.1 kernel [1]. So use the generic k3-fpdlink
prefix to pick the overlays in the builds.
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/arch/arm64/boot/dts/ti/Makefile?id=13ef48e91#n62
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We often carry more dtbs/dtbos in our kernel than we have upstreamed.
The inclusion of all of the dtb/dtbo in the KERNEL_DEVICETREE has become
problematic as we start testing the linux-next and 6.1 as part of our
LTS migration. To address this issue we are adding in two step method
for managing the KERNEL_DEVICETREE.
Going forward we will only accept dtb/dtbo in KERNEL_DEVICETREE if it is
available in upstream. This way we ensure that the variable is more
accurate for whichever kernel you might be looking at. We have also
added a new variable KERNEL_DEVICETREE_PREFIX which our kernel recipes
will use to auto set KERNEL_DEVICETREE based on what files are in the
kernel and not a fixed list in the conf files.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A-SK board supports
RGMII mode.
Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the
Add-On Ethernet Card.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally
targeted for J7-based devices, but AM62A can re-use the existing
overlays. Both the CM and RCM type of modules are supported.
As AM62A only has one CSI-RX port, we only use 4 out of the 8 total
FPDLink ports on the fusion board.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Add the following overlay files on AM62A SK:
1. Fusion board (For FPDLink-III cameras)
2. OV2312 FPDLink camera module
3. IMX219 RPi-compatible camera module
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Lets add the basic AM62A configuration
- Add machine conf for AM62A.
- The wic images will boot on AM62A HS-FS devices by default.
- The sysfw image for GP and HS-SE will be packaged in the wic image as
tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively.
- Add ti-sci-firmware overrides.
- Sign ATF, OPTEE and RTOS Firmware.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
|
Lets add the basic AM62Axx-evm configuration.
- Add configurations.
- Add firmware overrides.
- Add u-boot overrides.
- Add tifs-lpm-stub.
- Add cnm-wave-fw.
Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
