summaryrefslogtreecommitdiffstats
path: root/meta-ti-bsp/conf/machine
Commit message (Collapse)AuthorAgeFilesLines
...
* conf: machine: j7200-evm: Add MCSPI loopback overlay for J7200Vaishnav Achath2023-03-201-0/+1
| | | | | | | | | | Add the MCSPI loopback overlay file for J7200 EVM which helps users to enable MCU-MAIN MCSPI loopback applications. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add ehrpwm overlay for am69-skDasnavis Sabiya2023-03-201-0/+1
| | | | | | | | | | The AM69 SK has PWM output pins connected to its RPi header. Add overlay file to enable PWM pins. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx-lp-evm: Add OLDI Panel overlayAradhya Bhatia2023-03-201-0/+1
| | | | | | | | | | Add the Microtips OLDI Panel DT overlay for AM62 LP SK. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add ehrpwm overlay for am68-skSinthu Raja2023-03-201-0/+1
| | | | | | | | | | The AM68 SK has PWM output pins connected to its RPi headers. Add overlay file to enable PWM pins. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add FPDLink overlays for AM69 SKDasnavis Sabiya2023-03-201-0/+17
| | | | | | | | | | | | Add the overlay files for AM69 SK: 1. Fusion board (For FPDLink-III cameras). 2. IMX390 FPDLink-III camera module that includes both the CM and RCM type of modules. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add FPDLink overlays for am68-skSinthu Raja2023-03-201-0/+17
| | | | | | | | | | | | | Add the overlay files, over AM68 SK, for the following: 1. Fusion board (For FPDLink-III cameras). 2. IMX390 FPDLink-III camera module which includes both the CM and RCM type of modules. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Fix DTB overlay extension for OV5640Sinthu Raja2023-03-201-1/+1
| | | | | | | | | | | The extension for OV5640 overlay is incorrect. Therefore, update the correct extension to build the overlay with .dtbo Fixes: f67e9805 ("conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREE") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add AM69 SK specific dtb and dtbo to KERNEL_DEVICETREEDasnavis Sabiya2023-03-201-0/+4
| | | | | | | | | | | | | | | | | | | AM69 Starter Kit is a single board designed based on TI's AM69 SOC providing advanced system integration in automotive ADAS applications, autonomous mobile robot and edge AI applications. Add support for the same to include the board dtb file into the root filesystem. Add DT overlays support for the following features on AM69 SK: * Add DTBO entry to support OV5640 camera * Add DTBO entry to support RPi(IMX219) camera * Add DTBO entry for the DDR memory carveout. [1]:https://www.ti.com/lit/zip/spruj52 Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add overlays for IMX390 camerasJai Luthra2023-03-201-0/+8
| | | | | | | | | | | | | | IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally targeted for J7-based devices, but AM62A can re-use the existing overlays. Both the CM and RCM type of modules are supported. As AM62A only has one CSI-RX port, we only use 4 out of the 8 total FPDLink ports on the fusion board. Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREESinthu Raja2023-03-201-0/+4
| | | | | | | | | | | | | | | | AM68 Starter Kit is a low cost, small form factor board designed for TI's AM68/J721S2 SoC[1] which is optimized to provide best in class performance for industrial applications. Add DTB entry for the same. AM68 SK features camera support with MIPI(OV5640) and RPi(IMX219) connectors. Add DTBO for the same. Also, add DTBO entry for the DDR memory carveout. [1]:http://www.ti.com/lit/zip/spruj28 Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add camera overlays for AM62A SKJai Luthra2023-03-201-0/+6
| | | | | | | | | | | | | Add the following overlay files on AM62A SK: 1. Fusion board (For FPDLink-III cameras) 2. OV2312 FPDLink camera module 3. IMX219 RPi-compatible camera module Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx: Add missing overlays for AM625 SKAradhya Bhatia2023-03-201-0/+5
| | | | | | | | | | | | | | | Add the overlay files, over AM625 SK, for the following: 1. Technexion OV5640 Camera 2. Enhanced Capture (ECAP) 3. HDMI Audio Output 4. MCAN Transceiver 5. Microtips OLDI Panel Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add support for J784S4 HS-FSDasnavis2023-03-204-1/+60
| | | | | | | | | | | | | Add the basic J784S4 HS-FS configuration. * Add configurations to support both HS-FS and GP keeping GP as default. * Add ti-sci-firmware overrides for HS-FS. * Remove evm conf file inclusion in hs-evm conf. * Add j784s4 hs-evm specific config to hs-evm conf. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62axx-evm: Add AM62A HS-FS evm configurationSai Sree Kartheek Adivi2023-03-206-13/+72
| | | | | | | | | | | | | | | Lets add the basic AM62A configuration - Add machine conf for AM62A. - The wic images will boot on AM62A HS-FS devices by default. - The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively. - Add ti-sci-firmware overrides. - Sign ATF, OPTEE and RTOS Firmware. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add support for J721S2 HS-FSSinthu Raja2023-03-204-1/+58
| | | | | | | | | | | | | | | Add the basic J721S2 HS-FS configuration. - Add configurations to support both HS-FS and GP keeping GP as default. - Add ti-sci-firmware overrides for HS-FS. - Remove evm conf file inclusion in hs-evm conf. - Add j721s2 hs-evm specific config to hs-evm conf. Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-lp-evm: Add AM62x LP HS-FS evm configurationChirag Shilwant2023-03-203-1/+27
| | | | | | | | | | | | | | Lets add the basic AM62x LP HS-FS configuration - Add machine conf for AM62x LP HS-FS. - The wic images will boot on AM62x LP HS-FS devices by default. - The sysfw image for HS-SE will be packaged in the wic image as tiboot3-am62x-hs-evm.bin. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-evm: Add AM62x HS-FS evm configurationChirag Shilwant2023-03-203-3/+27
| | | | | | | | | | | | | | Lets add the basic AM62x HS-FS configuration - Add machine conf for AM62x HS-FS. - The wic images will boot on AM62x HS-FS devices by default. - The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62x-gp-evm.bin and tiboot3-am62x-hs-evm.bin respectively. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: k3: Define RD, DTB and DTBO load address for FIT imageSinthu Raja2023-03-205-32/+5
| | | | | | | | | | | | | | | | | K3 platforms include the FIT image-based kernel by default. The bootloader loads the kernel and DTB from the FIT image. The DTB/DTBOs are added to the FIT image but the load address is not included in the image section of each DTB/DTBO. This load address is determined by the LOADADDRESS macros in the kernel-fitmage class. Hence, define the RD/DTB/DTBOs LOADADDRESS and OFFSET macros in the K3 common include, and remove those macros defined in the K3 board specific config files. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62x HS-SE evm configurationChirag Shilwant2023-03-204-0/+36
| | | | | | | | | | | | | | | | | Lets add the basic AM62x HS-SE configuration. - Add machine conf for AM62x HS-SE. - The wic images will boot on AM62x GP devices by default. - To boot on AM62x HS-SE, simply switch out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am62x-hs-evm.bin tiboot3.bin - Add ti-sci-firmware overrides. - Add support to sign ATF and OPTEE. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62Q HS-SE evm configurationChirag Shilwant2023-03-204-3/+45
| | | | | | | | | | | | | | Lets add the basic AM62Q HS-SE configuration. - Add configurations. - Add ti-sci-firmware overrides. - Add u-boot overrides. - Add optee overrides. - Add ti-rtos-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add am62axx evm configurationParesh Bhagat2023-03-203-0/+37
| | | | | | | | | | | | | | | Lets add the basic AM62Axx-evm configuration. - Add configurations. - Add firmware overrides. - Add u-boot overrides. - Add tifs-lpm-stub. - Add cnm-wave-fw. Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com> Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: Remove vmlinux.gz from KERNEL_IMAGETYPESRyan Eatmon2023-03-201-1/+1
| | | | | | | | | | | With a recent patch to the TI kernel that includes debug symbols, the vmlinux.gz file grew in size that impacted the testing. This file is not needed to be in the final image so remove it from the list. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: omap-a15: Fix parsing when KERNEL_DEVICETREE is not setZachary Booth2023-03-201-1/+1
| | | | | | | | | | | Correctly handle parsing when KERNEL_DEVICETREE is not set. Signed-off-by: Zachary Booth <zachary.booth@garmin.com> Signed-off-by: Joshua Watt <Joshua.Watt@garmin.com> Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Add J784S4 hs platformManorit Chawdhry2023-03-202-0/+22
| | | | | | | | | | Machine conf for J784S4 HS platform. Used J721S2 hs as reference. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: k3: Remove unneeded TI_SECURE_DEV_PKG_K3 assignmentsAndrew Davis2023-03-017-14/+0
| | | | | | | | | For K3 machines the SECDEV selection happens in the recipes that use it. This assignment is therefor no longer needed. Remove it. Suggested-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf/machine: fix use of screen and touchscreen machine featuresDenys Dmytriyenko2023-02-245-6/+4
| | | | | | | | Some machine configs didn't specify their use of screen and touchscreen machine features correctly, fix them. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Fallback to software renderingRyan Eatmon2023-02-244-4/+4
| | | | | | | | | | | While we are working to update our platforms to support Weston 10 and beyond, we are falling back to software rendering for platforms that do not currently have a solution for GPU drivers (namely the boards that use SGX). Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: machine: set SGX display controller aliasRandolph Sapp2023-02-243-0/+9
| | | | | | | | | Set SGX display controller alias variables accordingly, as SGX has a few different aliases across platforms. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: machine: remove default preferences for egl,gles,gbmRandolph Sapp2023-02-249-34/+0
| | | | | | | | | | | Remove default preferences for virtual/egl, virtual/libgles and virtual/libgbm from machine configs to follow the new dependency chains via mesa in oder to support accelerated and software-rendered graphics, which is selected by virtual/gpudriver preference. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Revert "meta-ti-bsp: machine: Remove all gpu features"Denys Dmytriyenko2023-02-219-5/+45
| | | | | | | | | Merged by accident. This reverts commit 51bb56b74cd2e7f7e922cce84a023f669291ef00. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Revert "meta-ti-bsp: machine: Attempt to update DC alias"Denys Dmytriyenko2023-02-213-9/+0
| | | | | | | | | Merged by accident. This reverts commit 0dd6a86b9a20bc1117d19bec3e642602b6c54b8c. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Revert "conf: machine: Fallback to software rendering"Denys Dmytriyenko2023-02-214-4/+4
| | | | | | | | | Merged by accident. This reverts commit 5ae790999e762063446ec4623693eecd8ecd6be9. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Fallback to software renderingRyan Eatmon2023-02-154-4/+4
| | | | | | | | | While we are working to update our platforms to support Weston 10 and beyond, we are falling back to software rendering for platforms that do not currently have a solution for GPU drivers (namely the boards that use SGX). Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: machine: Attempt to update DC aliasRandolph Sapp2023-02-153-0/+9
| | | | | | | | | Attempt to update the SGX display controller alias variable according to what Andrew told me. SGX apparently had a few different aliases across platforms. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: machine: Remove all gpu featuresRandolph Sapp2023-02-159-45/+5
| | | | | | | | | Remove all gpu machine features and instead rely on the new dependency chain for resolving gpu dependencies. Set preferred providers for virtual/gpudriver where needed. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf/machine/k3r5.inc: update bootflow linksDenys Dmytriyenko2023-02-151-2/+3
| | | | | | | | | Original READMEs with bootflows were reworked and moved to a dedicated doc/ folder in more recent U-boot versions. Update links in the k3r5 config file accordingly to provide some basic explanation of K3 bootflows. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: add BeagleBone AI-64 supportDenys Dmytriyenko2023-01-312-0/+101
| | | | | | | | | | | | | BeagleBone AI-64 (https://beagleboard.org/ai-64) uses Texas Instruments Jacinto TDA4VM/J721e SoC. Officially BeagleBone AI-64 supports Debian Linux and builds its BSP on top of meta-ti and TI SDK, but adds custom DTBs and DTBO overlays, plus integrates other drivers and features. Let's add corresponding recipes for beagleboard.org kernel and u-boot along with the BeagleBone AI-64 machine config. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Rework do_image_wic dependenciesAndrew Davis2023-01-2014-49/+17
| | | | | | | | | | | | | | | | | | The WIC image for K3 depends on the TI-SCI firmware, on AM65x and J721e also the bootloader. Make this clear by only depending on firmware in the base k3.inc file, then adding the bootloader dependency in AM65x and J721e specific includes. Remove unneeded overrides from the evm level files. Remove do_image_tar dependencies as the tar files do not include the bootloader nor TI-SCI firmware, only the boot partition of the WIC file needs these. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Move TFA_BOARD and OPTEEMACHINE to the SoC levelAndrew Davis2023-01-209-12/+17
| | | | | | | | | These defines are specific to a SoC, not a SoC family (K3) nor any specific board. Move these to the SoC level for all boards to be consistent with boards already doing this correctly. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Remove OPTEEOUTPUTMACHINE definitionAndrew Davis2023-01-2010-10/+0
| | | | | | | | This was used in the base Linaro optee-os_git.bb recipe, it is no longer used, remove it from our boards. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Remove j7 grouping and j7.incAndrew Davis2023-01-205-9/+16
| | | | | | | | | | | J7 is an unneeded level of grouping that is now causing issues and leading to mistakes when adding new J7 based platforms. Each J7x family device should use the SoC name specifically to prevent accidentally adding or removing features that are not meant for the new SoC. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Move common defines into j784s4.incAndrew Davis2023-01-202-3/+11
| | | | | | | | | Like we do with J721e, J7200, and J721s2, use a SoC header include file to define common properties. This eases adding new boards based on these SoC. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Remove multi-certificate image commentAndrew Davis2023-01-201-2/+0
| | | | | | | Multi-cert is already now the default, no need to add a comment on that. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Move legacy HS signing classes into this layerAndrew Davis2023-01-204-0/+43
| | | | | | | | | These were in the meta-arago layer, but any distro should be able to run on HS devices. So move the classes and setup to the BSP layer. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Add am57xx.inc allowing use of SoC name over full EVM nameAndrew Davis2023-01-203-2/+7
| | | | | | | | | | In many spots we have to use the full EVM name for each EVM using the AM57x SoC leading to missed features on some EVMs. Add the am57xx name so we can generically add for AM57x. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf/machine/omapl138: correct few of the machine settingsDenys Dmytriyenko2022-11-153-4/+13
| | | | | | | | | | | | Cleanup and unify again - omapl138-lcdk is the only platform supported in the OMAP-L1 family. Plus there's no longer DaVinci family with corresponding settings. Adjust accordingly. Please note, there's currently a bug building Rust on ARMv5 platforms: https://bugzilla.yoctoproject.org/show_bug.cgi?id=14967 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add OP-TEE flavourJayesh Choudhary2022-11-101-0/+1
| | | | | | | | | | | Change the OP-TEE flavour from default k3-j721e to k3-j784s4 as sa3ul support for j784s4 is upstreamed in OP-TEE and we can use the same settings in j721s2 to access TRNG. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add OP-TEE flavourJayesh Choudhary2022-11-101-0/+1
| | | | | | | | | | | Add the new OP-TEE flavour for J784S4 instead of default k3-j721e. The TI-SCI ID for MCU domain sa2ul/sa3ul are not the same for J721E and J784S4. So a new flavour is added in upstream OP-TEE. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* j721s2 and j784s4: Correct serial console deviceRyan Eatmon2022-11-102-2/+2
| | | | | | | | | | | | | Serial console in J721S2/J784S4 EVM config was set to ttyS10. It should be ttyS2. This caused sysv based systems (eg, tiny) to apparently hang because of no login prompt. This didn't show up as a problem on systemd systems (eg, default) because systemd will automatically setup a serial tty with the console option passed in on the kernel command line (using console=...), which U-Boot correctly passes in as ttyS2 for J721S2/J784S4. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add j784s4-evm configuration.Ryan Eatmon2022-11-102-0/+35
| | | | | | | | | | | | | | | Adding support for j784s4-evm: - Add configurations. - Add firmware. - Add u-boot. - Add gpu support. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-08 11:13:27 +0000