summaryrefslogtreecommitdiffstats
path: root/meta-ti-bsp/conf
Commit message (Collapse)AuthorAgeFilesLines
...
* conf: machine: j721s2: Add AM68 SK dtbs to KERNEL_DEVICETREE_PREFIXRyan Eatmon2023-05-092-0/+2
| | | | | | | Add in missing am68 based dtbs that were added in dunfell at the end of the 8.6 release cycle. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: Sync KERNEL_DEVICETREE(_PREFIX) with upstreamRyan Eatmon2023-05-093-2/+13
| | | | | | | | Some of the settings for KERNEL_DEVICETREE_PREFIX were missed in the first pass. Additionally, some new dts files that were not present in upstream are now there and can be updated in KERNEL_DEVICETREE. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: conf: am62xx-lp-evm: Fix DT and DT prefixesAradhya Bhatia2023-05-081-2/+2
| | | | | | | | | | | | | | | The DT name k3-am62-lp-sk.dts was adopted instead of k3-am62x-lp-sk.dts because the community prefers avoiding the wildcard letter 'x'.[1] Drop the letter 'x' from the strings in KERNEL_DEVICETREE_PREFIX and KERNEL_DEVICETREE to accurately reflect the DT names. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> [1]: https://lore.kernel.org/all/06cbcd7d-bc83-bfeb-0821-72c7caf9a5e7@linaro.org/ Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-ti: Add recipe and patches for jailhouse support for am62xxParesh Bhagat2023-05-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add and enable Jailhouse support for TI's k3-am625-sk similarly to how other TI platforms were added and enabled in the past by adding platform-specific configuration variables for the root cell DTB overlay, and the Linux demo inmate DTB, configuration, and Kernel command line settings. Migrate the jailhouse recipe to kirkstone from dunfell. Switch to latest upstream source tree for jailhouse. The TI Jailhouse repo has gone stale and now upstream is really the happening place where new development happens including for new devices such as AM62x. Hence go ahead and switch to using the upstream repo. Update the platform-specific config files to such that the root cell DTB overlay gets included in the file system images. Enable additional console on ttyS3 (usually mapped to main_uart1) and ttyS2 for the Linux demo inmate to use. Add patches for the Jailhouse source tree for am62xx. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: include: k3: Select correct WKS fileDaniel Schultz2023-05-081-1/+2
| | | | | | | | | | | Select the correct WKS file according to the MACHINE_FEATURE efi. Right now, the sdimage-2part-efi.wks is set by default. Switch to the sdimage-2part.wks file, if efi was removed from MACHINE_FEATURES to allow non-efi boot methods. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: add mesa to SIGGEN_EXCLUDERECIPES_ABISAFE listDenys Dmytriyenko2023-04-181-0/+1
| | | | | | | | | | | | | | | | For TI platforms with SGX and Rogue graphics we patch upstream Mesa with PVR support and conditionally enable features based on virtual/gpudriver preference. This makes Mesa package platform-specific and it contains the corresponding PACKAGE_ARCH = "${MACHINE_ARCH}" line. In order to get greater re-use from generic non-machine-speciofic packages down the dependency chain, such as Wayland, Weston, Qt5 modules, etc. we need to mark mesa recipe as still providing stable OpenGL ABIs, such as EGL, GLES, GBM, etc. - add it to SIGGEN_EXCLUDERECIPES_ABISAFE list. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Remove SGX driver from SIGGEN_EXCLUDERECIPES_ABISAFEAndrew Davis2023-04-181-2/+0
| | | | | | | | | | | | | Neither of recipes nor their ABI is all that stable. OpenGL might be slightly more stable, but that is not what these provide anymore. The variable helps with re-use of generic packages down the dependency tree, when they depend on a machine-specific package. SGX UM used to provide different standard OpenGL ABIs (EGL, GLES, GBM) and hence was listed here. Now those ABIs are provided by Mesa, so SGX is removed. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Set common default SERIAL_CONSOLES for all K3Andrew Davis2023-04-1813-33/+3
| | | | | | | | | | | The traditional order of serial consoles for K3 has ttyS2 being the primary UART attached console. ttyS0 is also a common choice for distros and the TI kernel may switch at some point. To prepare we check both UARTs on all K3 devices. Move this common check to a K3 common location. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: switch beaglebone and beagle-x15 to bb.org kernel/u-bootDenys Dmytriyenko2023-04-102-0/+8
| | | | | | | | | | | Switch 32-bit beaglebone and beagle-x15 platforms to use linux-bb.org and u-boot-bb.org recipes for simplicity and for additional Beagle-specific features that are added on top of TI reference kernel, such as dynamic management of capes and other OOBE enhancements. Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: beagleplay: add new BeaglePlay platformDenys Dmytriyenko2023-04-102-0/+84
| | | | | | | | | | * Add configs for BeaglePlay Cortex-A53 and Cortex-R5F cores (am62xx SoC family) * Uses corresponding linux-bb.org and u-boot-bb.org recipes * U-boot for now uses a separate branch for BeaglePlay Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* beaglebone-ai64: add new DTBOs, remove duplicate settingsDenys Dmytriyenko2023-04-101-4/+2
| | | | | | | | | * 5.10.162 added 2 new DT overlays * Remove duplicate settings that are already set in SoC config Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: change from do_image_wic/tar to do_image_completeRyan Eatmon2023-04-0511-21/+21
| | | | | | | | | When trying to support OpenBMC, we found that our use of do_image_wic and do_image_tar for adding depends and mcdepends was too limiting. Moving to do_image_complete is a higher level in the tree that means for any image type the dependencies will be correct. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-*: Add filtering for which dtb/dtbo to includeRyan Eatmon2023-03-3116-151/+92
| | | | | | | | | | | | | | | | | | | We often carry more dtbs/dtbos in our kernel than we have upstreamed. The inclusion of all of the dtb/dtbo in the KERNEL_DEVICETREE has become problematic as we start testing the linux-next and 6.1 as part of our LTS migration. To address this issue we are adding in two step method for managing the KERNEL_DEVICETREE. Going forward we will only accept dtb/dtbo in KERNEL_DEVICETREE if it is available in upstream. This way we ensure that the variable is more accurate for whichever kernel you might be looking at. We have also added a new variable KERNEL_DEVICETREE_PREFIX which our kernel recipes will use to auto set KERNEL_DEVICETREE based on what files are in the kernel and not a fixed list in the conf files. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add overlay for second CPSW3G PortSiddharth Vadapalli2023-03-211-0/+1
| | | | | | | | | | | | | The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A-SK board supports RGMII mode. Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the Add-On Ethernet Card. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add MCSPI loopback overlay for J784S4Vaishnav Achath2023-03-211-0/+1
| | | | | | | | | | | | Add the MCSPI loopback overlay file for J784S4 EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add MCSPI loopback overlay for J721S2Vaishnav Achath2023-03-211-0/+1
| | | | | | | | | | | | Add the MCSPI loopback overlay file for J721S2 EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Add MCSPI loopback overlay for J721EVaishnav Achath2023-03-211-0/+1
| | | | | | | | | | | | Add the MCSPI loopback overlay file for J721E EVM which helps users to enable MCU-MAIN MCSPI loopback applications, even though the overlay is named j7200-mcspi-loopback.dtbo, same can be used for testing on other J7 platforms as well. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add uarts overlay for J784S4Bhavya Kapoor2023-03-211-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J784S4 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add uarts overlay for J721S2Bhavya Kapoor2023-03-211-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J721S2 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Add uarts overlay for J721EBhavya Kapoor2023-03-211-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J721E SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7200-evm: Add uarts overlay for J7200Bhavya Kapoor2023-03-211-0/+1
| | | | | | | | | | | Add device tree overlay for extending support for mcu_uart0 as well as wkup_uart0 for boards with J7200 SoC. This overlay will mainly be used for the purpose of testing uart instances. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add camera overlays for J784S4 EVMVaishnav Achath2023-03-211-0/+2
| | | | | | | | | | | | Add the following overlay files on J784S4 EVM: 1. Fusion board (For FPDLink-III cameras) 2. OV5640 camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add camera overlays for J721S2 EVMVaishnav Achath2023-03-211-0/+2
| | | | | | | | | | | | Add the following overlay files on J721S2 EVM: 1. Fusion board (For FPDLink-III cameras) 2. OV5640 camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Add camera overlays for J721E EVMVaishnav Achath2023-03-211-0/+21
| | | | | | | | | | | | | Add the following overlay files on J721E EVM: 1. Fusion board (For FPDLink-III cameras) 2. IMX390 FPDLink camera module 3. IMX219 RPi-compatible camera module Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j7200-evm: Add MCSPI loopback overlay for J7200Vaishnav Achath2023-03-211-0/+1
| | | | | | | | | | Add the MCSPI loopback overlay file for J7200 EVM which helps users to enable MCU-MAIN MCSPI loopback applications. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add ehrpwm overlay for am69-skDasnavis Sabiya2023-03-211-0/+1
| | | | | | | | | | The AM69 SK has PWM output pins connected to its RPi header. Add overlay file to enable PWM pins. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx-lp-evm: Add OLDI Panel overlayAradhya Bhatia2023-03-211-0/+1
| | | | | | | | | | Add the Microtips OLDI Panel DT overlay for AM62 LP SK. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add ehrpwm overlay for am68-skSinthu Raja2023-03-211-0/+1
| | | | | | | | | | The AM68 SK has PWM output pins connected to its RPi headers. Add overlay file to enable PWM pins. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add FPDLink overlays for AM69 SKDasnavis Sabiya2023-03-211-0/+17
| | | | | | | | | | | | Add the overlay files for AM69 SK: 1. Fusion board (For FPDLink-III cameras). 2. IMX390 FPDLink-III camera module that includes both the CM and RCM type of modules. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add FPDLink overlays for am68-skSinthu Raja2023-03-211-0/+17
| | | | | | | | | | | | | Add the overlay files, over AM68 SK, for the following: 1. Fusion board (For FPDLink-III cameras). 2. IMX390 FPDLink-III camera module which includes both the CM and RCM type of modules. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Fix DTB overlay extension for OV5640Sinthu Raja2023-03-211-1/+1
| | | | | | | | | | | The extension for OV5640 overlay is incorrect. Therefore, update the correct extension to build the overlay with .dtbo Fixes: f67e9805 ("conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREE") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4: Add AM69 SK specific dtb and dtbo to KERNEL_DEVICETREEDasnavis Sabiya2023-03-211-0/+4
| | | | | | | | | | | | | | | | | | | AM69 Starter Kit is a single board designed based on TI's AM69 SOC providing advanced system integration in automotive ADAS applications, autonomous mobile robot and edge AI applications. Add support for the same to include the board dtb file into the root filesystem. Add DT overlays support for the following features on AM69 SK: * Add DTBO entry to support OV5640 camera * Add DTBO entry to support RPi(IMX219) camera * Add DTBO entry for the DDR memory carveout. [1]:https://www.ti.com/lit/zip/spruj52 Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add overlays for IMX390 camerasJai Luthra2023-03-211-0/+8
| | | | | | | | | | | | | | IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally targeted for J7-based devices, but AM62A can re-use the existing overlays. Both the CM and RCM type of modules are supported. As AM62A only has one CSI-RX port, we only use 4 out of the 8 total FPDLink ports on the fusion board. Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREESinthu Raja2023-03-211-0/+4
| | | | | | | | | | | | | | | | AM68 Starter Kit is a low cost, small form factor board designed for TI's AM68/J721S2 SoC[1] which is optimized to provide best in class performance for industrial applications. Add DTB entry for the same. AM68 SK features camera support with MIPI(OV5640) and RPi(IMX219) connectors. Add DTBO for the same. Also, add DTBO entry for the DDR memory carveout. [1]:http://www.ti.com/lit/zip/spruj28 Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62axx: Add camera overlays for AM62A SKJai Luthra2023-03-211-0/+6
| | | | | | | | | | | | | Add the following overlay files on AM62A SK: 1. Fusion board (For FPDLink-III cameras) 2. OV2312 FPDLink camera module 3. IMX219 RPi-compatible camera module Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62xx: Add missing overlays for AM625 SKAradhya Bhatia2023-03-211-0/+5
| | | | | | | | | | | | | | | Add the overlay files, over AM625 SK, for the following: 1. Technexion OV5640 Camera 2. Enhanced Capture (ECAP) 3. HDMI Audio Output 4. MCAN Transceiver 5. Microtips OLDI Panel Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add support for J784S4 HS-FSDasnavis2023-03-214-1/+60
| | | | | | | | | | | | | Add the basic J784S4 HS-FS configuration. * Add configurations to support both HS-FS and GP keeping GP as default. * Add ti-sci-firmware overrides for HS-FS. * Remove evm conf file inclusion in hs-evm conf. * Add j784s4 hs-evm specific config to hs-evm conf. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62axx-evm: Add AM62A HS-FS evm configurationSai Sree Kartheek Adivi2023-03-216-13/+72
| | | | | | | | | | | | | | | Lets add the basic AM62A configuration - Add machine conf for AM62A. - The wic images will boot on AM62A HS-FS devices by default. - The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively. - Add ti-sci-firmware overrides. - Sign ATF, OPTEE and RTOS Firmware. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add support for J721S2 HS-FSSinthu Raja2023-03-216-1/+64
| | | | | | | | | | | | | | | Add the basic J721S2 HS-FS configuration. - Add configurations to support both HS-FS and GP keeping GP as default. - Add ti-sci-firmware overrides for HS-FS. - Remove evm conf file inclusion in hs-evm conf. - Add j721s2 hs-evm specific config to hs-evm conf. Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-lp-evm: Add AM62x LP HS-FS evm configurationChirag Shilwant2023-03-213-1/+27
| | | | | | | | | | | | | | Lets add the basic AM62x LP HS-FS configuration - Add machine conf for AM62x LP HS-FS. - The wic images will boot on AM62x LP HS-FS devices by default. - The sysfw image for HS-SE will be packaged in the wic image as tiboot3-am62x-hs-evm.bin. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-evm: Add AM62x HS-FS evm configurationChirag Shilwant2023-03-214-3/+30
| | | | | | | | | | | | | | Lets add the basic AM62x HS-FS configuration - Add machine conf for AM62x HS-FS. - The wic images will boot on AM62x HS-FS devices by default. - The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62x-gp-evm.bin and tiboot3-am62x-hs-evm.bin respectively. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: k3: Define RD, DTB and DTBO load address for FIT imageSinthu Raja2023-03-215-32/+5
| | | | | | | | | | | | | | | | | K3 platforms include the FIT image-based kernel by default. The bootloader loads the kernel and DTB from the FIT image. The DTB/DTBOs are added to the FIT image but the load address is not included in the image section of each DTB/DTBO. This load address is determined by the LOADADDRESS macros in the kernel-fitmage class. Hence, define the RD/DTB/DTBOs LOADADDRESS and OFFSET macros in the K3 common include, and remove those macros defined in the K3 board specific config files. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62x HS-SE evm configurationChirag Shilwant2023-03-214-0/+36
| | | | | | | | | | | | | | | | | Lets add the basic AM62x HS-SE configuration. - Add machine conf for AM62x HS-SE. - The wic images will boot on AM62x GP devices by default. - To boot on AM62x HS-SE, simply switch out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am62x-hs-evm.bin tiboot3.bin - Add ti-sci-firmware overrides. - Add support to sign ATF and OPTEE. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62Q HS-SE evm configurationChirag Shilwant2023-03-215-3/+48
| | | | | | | | | | | | | | Lets add the basic AM62Q HS-SE configuration. - Add configurations. - Add ti-sci-firmware overrides. - Add u-boot overrides. - Add optee overrides. - Add ti-rtos-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add am62axx evm configurationParesh Bhagat2023-03-213-0/+37
| | | | | | | | | | | | | | | Lets add the basic AM62Axx-evm configuration. - Add configurations. - Add firmware overrides. - Add u-boot overrides. - Add tifs-lpm-stub. - Add cnm-wave-fw. Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com> Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: Remove vmlinux.gz from KERNEL_IMAGETYPESRyan Eatmon2023-03-211-1/+1
| | | | | | | | | | | With a recent patch to the TI kernel that includes debug symbols, the vmlinux.gz file grew in size that impacted the testing. This file is not needed to be in the final image so remove it from the list. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: omap-a15: Fix parsing when KERNEL_DEVICETREE is not setZachary Booth2023-03-211-1/+1
| | | | | | | | | | | Correctly handle parsing when KERNEL_DEVICETREE is not set. Signed-off-by: Zachary Booth <zachary.booth@garmin.com> Signed-off-by: Joshua Watt <Joshua.Watt@garmin.com> Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Add J784S4 hs platformManorit Chawdhry2023-03-212-0/+22
| | | | | | | | | | Machine conf for J784S4 HS platform. Used J721S2 hs as reference. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: k3: Remove unneeded TI_SECURE_DEV_PKG_K3 assignmentsAndrew Davis2023-03-017-14/+0
| | | | | | | | | For K3 machines the SECDEV selection happens in the recipes that use it. This assignment is therefor no longer needed. Remove it. Suggested-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf/machine: fix use of screen and touchscreen machine featuresDenys Dmytriyenko2023-02-245-6/+4
| | | | | | | | Some machine configs didn't specify their use of screen and touchscreen machine features correctly, fix them. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-09 19:00:16 +0000