summaryrefslogtreecommitdiffstats
path: root/meta-ti-bsp/recipes-bsp/ti-sci-fw
Commit message (Collapse)AuthorAgeFilesLines
* meta-ti-bsp: Add Support for AM62LChirag Shilwant2025-02-051-0/+6
| | | | | | | | | - Add machine configuration for am62lxx-evm - Add TFA, OPTEE, firmware & u-boot overrides Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Do not unexport CFLAGS, LDFLAGS, AS, or LDAndrew Davis2023-11-081-5/+0
| | | | | | | | There is no compilation in this simple firmware recipe, no need for these lines, remove them. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: Make CLEANBROKEN and FILES part of common includeAndrew Davis2023-11-081-4/+0
| | | | | | | | These are common for all recipes that include ti-linux-fw.inc, add it to this include file and remove from each recipe. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Remove COMPATIBLE_MACHINE and extend recipe to k3 machinesAniket Limaye2023-10-121-2/+4
| | | | | | | | | | | | | Revert ebcf15bf0f31208e87ce60a4696e585940b46777 : "recipes-bsp:ti-sci-fw: Add k3r5 as COMPATIBLE_MACHINE" Extend recipe to k3 machines too, to provide ti-fs-stub-* firmware for u-boot aarch64 build. Update do_deploy() to allow multiconfig builds for k3 machines Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Deploy the fw binaries to the deploy directoryAniket Limaye2023-10-051-0/+11
| | | | | | | | Deploy the sysfw binaries to the DEPLOYDIR, to be picked up by the tisdk-core-bundle... for the prebuilt binaries directory Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-bsp:ti-sci-fw: Add k3r5 as COMPATIBLE_MACHINEAniket Limaye2023-09-291-0/+1
| | | | | | | This recipe only provides the sysfw binaries compiled for the r5 Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Include the TIFS LPM stub with the rest of SYSFWAndrew Davis2023-06-191-0/+1
| | | | | | | | | | | | This firmware is shipped with the rest of ti-sysfw blobs, it shares the same versions too and so should be simply bundled with the same. This stub is also built into U-Boot and not loaded during kernel runtime anymore, so remove the RDEPENDS in kernel. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Drop k3-image-gen and only provide firmwareAndrew Davis2023-06-071-135/+9
| | | | | | | | | This converts ti-sci-fw into a standard firmware provider package. We do not need to do anything additional here with that firmware as U-Boot now does that for us with binman. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Remove source package recipeAndrew Davis2023-06-071-45/+0
| | | | | | | | K3-image-gen is going away and we don't do SRCIPK packages like this anymore anyway. Remove this recipe. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Add SYSFW_SUFFIX to SYSFW_BINARY to match k3-image-genRyan Eatmon2023-05-171-16/+16
| | | | | | | k3_image_gen added the suffix to the sysfw binary to differentiate between GP and HS binaries. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: beagleplay: add new BeaglePlay platformDenys Dmytriyenko2023-04-101-0/+1
| | | | | | | | | | * Add configs for BeaglePlay Cortex-A53 and Cortex-R5F cores (am62xx SoC family) * Uses corresponding linux-bb.org and u-boot-bb.org recipes * U-boot for now uses a separate branch for BeaglePlay Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Fix some syntax issuesRyan Eatmon2023-03-211-2/+2
| | | | | | | Fixing some syntax issues from the last dunfell to kirkstone sync up patch series. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add support for J784S4 HS-FSDasnavis2023-03-211-1/+2
| | | | | | | | | | | | | Add the basic J784S4 HS-FS configuration. * Add configurations to support both HS-FS and GP keeping GP as default. * Add ti-sci-firmware overrides for HS-FS. * Remove evm conf file inclusion in hs-evm conf. * Add j784s4 hs-evm specific config to hs-evm conf. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62axx-evm: Add AM62A HS-FS evm configurationSai Sree Kartheek Adivi2023-03-211-1/+3
| | | | | | | | | | | | | | | Lets add the basic AM62A configuration - Add machine conf for AM62A. - The wic images will boot on AM62A HS-FS devices by default. - The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively. - Add ti-sci-firmware overrides. - Sign ATF, OPTEE and RTOS Firmware. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add support for J721S2 HS-FSSinthu Raja2023-03-211-1/+2
| | | | | | | | | | | | | | | Add the basic J721S2 HS-FS configuration. - Add configurations to support both HS-FS and GP keeping GP as default. - Add ti-sci-firmware overrides for HS-FS. - Remove evm conf file inclusion in hs-evm conf. - Add j721s2 hs-evm specific config to hs-evm conf. Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Add SYSFW_SUFFIX to sysfw.itb filesRyan Eatmon2023-03-211-2/+18
| | | | | | | | | | | | | With the advent of using multiconfigs to build all of the versions of the machines (gp, hs-se, hs-fs, etc...) the sysfw.itb has become a point of contention for do_deploy. To resolve the duplicate file copy errors from bitbake we need to uniquify the sysfw.itb file names. So, let's do the same thing we do with the tiboot3.bin file and add the SYSFW_SUFFIX into the name. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-lp-evm: Add AM62x LP HS-FS evm configurationChirag Shilwant2023-03-211-0/+1
| | | | | | | | | | | | | | Lets add the basic AM62x LP HS-FS configuration - Add machine conf for AM62x LP HS-FS. - The wic images will boot on AM62x LP HS-FS devices by default. - The sysfw image for HS-SE will be packaged in the wic image as tiboot3-am62x-hs-evm.bin. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-evm: Add AM62x HS-FS evm configurationChirag Shilwant2023-03-211-0/+1
| | | | | | | | | | | | | | Lets add the basic AM62x HS-FS configuration - Add machine conf for AM62x HS-FS. - The wic images will boot on AM62x HS-FS devices by default. - The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62x-gp-evm.bin and tiboot3-am62x-hs-evm.bin respectively. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62x HS-SE evm configurationChirag Shilwant2023-03-211-1/+2
| | | | | | | | | | | | | | | | | Lets add the basic AM62x HS-SE configuration. - Add machine conf for AM62x HS-SE. - The wic images will boot on AM62x GP devices by default. - To boot on AM62x HS-SE, simply switch out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am62x-hs-evm.bin tiboot3.bin - Add ti-sci-firmware overrides. - Add support to sign ATF and OPTEE. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62Q HS-SE evm configurationChirag Shilwant2023-03-211-0/+1
| | | | | | | | | | | | | | Lets add the basic AM62Q HS-SE configuration. - Add configurations. - Add ti-sci-firmware overrides. - Add u-boot overrides. - Add optee overrides. - Add ti-rtos-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add am62axx evm configurationParesh Bhagat2023-03-211-0/+1
| | | | | | | | | | | | | | | Lets add the basic AM62Axx-evm configuration. - Add configurations. - Add firmware overrides. - Add u-boot overrides. - Add tifs-lpm-stub. - Add cnm-wave-fw. Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com> Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* j784s4-hs: changes to support new hs platformManorit Chawdhry2023-03-211-0/+1
| | | | | | | | | | | | | Changes to support new j784s4-hs platform in: 1) ti-sci-fw_git: Update firmware prefix for j784s4-hs 2) atf: sign the image 4) optee: sign the image Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use new ti-secdev class to sign the imagesAndrew Davis2023-03-011-6/+2
| | | | | | | | Use the new ti-k3-secdev package to pull in the signing tools if they are not provided by the environment. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: add BeagleBone AI-64 supportDenys Dmytriyenko2023-01-311-0/+3
| | | | | | | | | | | | | BeagleBone AI-64 (https://beagleboard.org/ai-64) uses Texas Instruments Jacinto TDA4VM/J721e SoC. Officially BeagleBone AI-64 supports Debian Linux and builds its BSP on top of meta-ti and TI SDK, but adds custom DTBs and DTBO overlays, plus integrates other drivers and features. Let's add corresponding recipes for beagleboard.org kernel and u-boot along with the BeagleBone AI-64 machine config. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: sets TI_K3_SECDEV_INSTALL_DIR default valueJose Quaresma2023-01-311-0/+2
| | | | | | | | | | The TI_K3_SECDEV_INSTALL_DIR is defined on the meta-ti-extras layer so when the layer is not used the variable is undefined. For such cases we can use default value that is the same defined on the recipes-ti/includes/ti-paths.inc Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: make dependency on meta-ti-extras softDenys Dmytriyenko2022-12-011-2/+2
| | | | | | | | | | | | | | | | | | Replace "require" with "include" to load ti-paths.inc and not break parsing when meta-ti-extras is not in the BBLAYERS list. As ti-paths.inc is only needed to define TI_K3_SECDEV_INSTALL_DIR for ti-k3-secdev when TI_SECURE_DEV_PKG_K3 is not set and building for K3 HS platforms. Since ti-k3-secdev resides in meta-ti-extras, the soft dependency will still work fine and give a build error "Nothing PROVIDES 'ti-k3-secdev-native'" when it is needed. Also, since TI_K3_SECDEV_INSTALL_DIR can now be undefined, use d.getVar() to access it ensuring it doesn't break the condition. Reported-by: Daniel Díaz <mrchapp@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: use getVar() to check if TI_SECURE_DEV_PKG_K3 is definedDenys Dmytriyenko2022-11-231-1/+1
| | | | | | | | | Otherwise undefined variable is returned literally as ${TI_SECURE_DEV_PKG_K3} and the condition won't work. Cc: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add j784s4-evm configuration.Ryan Eatmon2022-11-231-0/+1
| | | | | | | | | | | | | | | Adding support for j784s4-evm: - Add configurations. - Add firmware. - Add u-boot. - Add gpu support. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use d.getVar() in DEPENDS expressionRandolph Sapp2022-11-231-1/+1
| | | | | | | | | | | | Switch the DEPENDS_append expression to use d.getVar() instead of the usual variable expansion to prevent the inline Python command from becoming mangled. Signed-off-by: Randolph Sapp <rs@ti.com> Acked-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: add am62xx-lp-evm configurationAnand Gadiyar2022-11-231-0/+1
| | | | | | | | | | | | | | | This platform is similar to the currently supported am62xx-evm, except that we currently need new defconfigs for u-boot and new dtbs in the filesystem. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Hari Nagalla <hnagalla@ti.com> Cc: Andrew Davis <afd@ti.com> Cc: Praneeth Bajjuri <praneeth@ti.com> Cc: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use ti-k3-secdev if TI_SECURE_DEV_PKG_K3 is not definedAndrew Davis2022-11-231-1/+3
| | | | | | | Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Add am65xx-evm-k3r5-sr2 to combined R5 boot listAndrew Davis2022-11-231-0/+2
| | | | | | | | | | | This machine was missed when making combined R5 boot the default. Add this machine to fix build failure. Reported-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Only deploy the raw SYSFW images for one machine targetAndrew Davis2022-11-231-2/+2
| | | | | | | | | | | | This recipe deploys the raw SYSFW unconditionally which causes issues when doing multiconfig builds. What should happen is only one deploys these, select that the same way we select which one deploys the default SYSFW symlink. Move the deploy step there. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Only install and deploy combined boot symlink when setAndrew Davis2022-11-231-2/+7
| | | | | | | | | | | Add SYSFW_TIBOOT3_SYMLINK and use it the same way we use SYSFW_SYMLINK for the non-combined boot flow, to allow not setting the default for some machine types. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Make combined R5 boot the defaultAndrew Davis2022-11-231-16/+14
| | | | | | | | | | | | | | Going forward, the combined tiboot3.bin is going to be the standard. Only AM65x and J721e will still use the split boot. Set DEPENDS and EXTRA_OEMAKE for combined boot and override only for the two split boot platforms. This makes it easier to add new platforms and simplifies deployment logic. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use SYSFW_TIBOOT3 to point to the SYSFW imageAndrew Davis2022-11-231-8/+8
| | | | | | | | | | | | Currently we reuse UBOOT_* names which usually are the same we want to give to the name of the SYSFW binary. This isn't always correct, we should use a SYSFW specific variable in case the UBOOT names are changed. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Deploy all SYSFW firmware typesAndrew Davis2022-11-231-16/+12
| | | | | | | | | | This allows us to rebuild and re-sign the SYSFW image if needed from the deploy directory for any SoC type. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use new SOC_TYPE and SYSFW_DIR to simplify recipeAndrew Davis2022-11-231-120/+27
| | | | | | | | | | | | | | | | | | | The k3-image-gen now has two new helper flags SOC_TYPE and SYSFW_DIR that we can use to simplify this recipe. With these we do not need to do anything different here for HS builds, the SOC_TYPE selects this now. DL_URL also do not need cleared anymore, the k3-image-gen will no longer download missing files when not needed for the current build type. do_install and do_deploy can also check for the existence of either sysfw.itb or tiboot3.bin and install/deploy as needed. k3-image-gen only gerneates the right one now depending on the SoC. Merge all these steps for all SoCs. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* j721s2-hs: changes to support new hs platformJayesh Choudhary2022-09-221-0/+18
| | | | | | | | | | | | | Changes to support new j721s2-hs platform in: 1) ti-sci-fw_git: Update firmware prefix for j721s2-hs 2) atf: sign the image 3) u-boot: Add u-boot-spl image for combined boot image 4) optee: sign the image Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add am62xx evm configurationNishanth Menon2022-05-021-0/+18
| | | | | | | | | | | | | | | Lets add the basic AM62xx-evm configuration. - Add configurations. - Add firmware overrides. - Add u-boot overrides. - Update TI_LINUX_FW_SRCREV and K3_IMAGE_GEN_SRCREV to appropriate SHAs. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: rename j7-evm to j721e-evmAndrew Davis2022-03-291-3/+3
| | | | | | | | | | | | | | | | In many places we use "j7" the family when we should be using a specific SoC or EVM and vice-versa. For instance when including graphics drivers we add for all "j7" family, but what we really want is only for some specific j7 SoC. First step in untangling this is to make it clear that there is no SoC called j7. There is a SoC called j721e with a j721e-evm. Fix up this naming here. Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Revert "ti-sci-fw: Fix for k3-image-gen issue for combined boot images"Praneeth Bajjuri2022-02-222-69/+0
| | | | | | | | | | | | | | This reverts commit d29025f7e868bea6299b55caf78e684fc647be33. * associated fix in k3-image-gen is picked up now. commit 892c86501ff7 ("Makefile: Skip signing of binaries for HS combined boot") hence its no longer needed to carry the same fix from meta-ti here. Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add j721s2 evm configurationNishanth Menon2022-02-221-2/+20
| | | | | | | Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: create a sub-layer meta-ti-bsp from existing contentDenys Dmytriyenko2022-02-223-0/+269
Extra sub-layers will be created next and relevant content moved across them. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-07 20:46:47 +0000