summaryrefslogtreecommitdiffstats
path: root/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc
Commit message (Collapse)AuthorAgeFilesLines
* u-boot-ti: deploy initial-env for the main machineDenys Dmytriyenko2024-04-191-7/+7
| | | | | | | | | | | | | | | | | It is useful to have U-boot initial environment deployed for future reference or to initialize environment files as part of the build. In multiconfig setup, such as TI K3 platforms, building U-boot multiple times for Cortex-R5 and Cortex-A53 cores results in file conflicts when deploying under the same name. To avoid that, those initial-env files were removed at the end of the do_deploy task. But it is better to only remove them for k3r5 multiconfig, since that only builds SPL and saved env doesn't make much sense, but preserve and deploy initial-env for the main machine multiconfig. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Change from UBOOT_LOCALVERSION and SRCPVRyan Eatmon2024-03-041-3/+6
| | | | | | | | Stop using UBOOT_LOCALVERSION, and copy what is done in the kernel recipe. This allows us to set the correct SHA into the version string even if AUTOREV is used since SRCPV is no longer set in oe-core. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Add bootsplash image file for AM62PDevarsh Thakkar2024-02-081-0/+10
| | | | | | | | | | Add TI logo image as bootsplash image file for AM62P and install it in boot directory from where u-boot can read from and display during boot-up time. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Acked-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti*: Move mainline to 2024.01 and move logo codeRyan Eatmon2024-01-241-0/+10
| | | | | | | | Now that 2024.01 is official, the logo that am62xx-evm installs is available in all versions of the repo that we point to. Move all of that code out of the .bb files and into the u-boot-ti.inc file. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Add Support for j722s-evmRyan Eatmon2024-01-091-0/+2
| | | | | | | | | | | | - Add A53 and R5 machine configurations for j722s-evm. - Add firmware overrides. - Add u-boot overrides. - Add cnm-wave support. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Add Support for am62pxx-evmChirag Shilwant2023-10-261-0/+2
| | | | | | | | | | | - Add A53 and R5 machine configurations for am62pxx-evm. - Add firmware overrides. - Add u-boot overrides. - Add cnm-wave support. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Brandon Brnich <b-brnich@ti.com>
* Revert "recipes-bsp: u-boot-ti.inc: Remove ti-sci-fw from DEPENDS for k3 ↵Aniket Limaye2023-10-171-0/+1
| | | | | | | | | | machine" This reverts commit cd13cafd659f7784f4131fd0bafb8a3c7c9ef126. Some devices need ti-fs-stub-* firmware for the uboot aarch64 build Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* uboot: Handle UBOOT_CONFIG for multiple R5 defconfigsGarrett Giordano2023-10-171-2/+20
| | | | | | | | | | | Currently the do_compile step fails if we try to implement UBOOT_CONFIG in an attempt to build U-Boot with multiple R5 defconfigs. This commit adds a condition to handle linking the UBOOT_BINARY if UBOOT_CONFIG is used in place of UBOOT_MACHINE. Signed-off-by: Garrett Giordano <ggiordano@phytec.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Correctly fix SPL binary name for SD/MMC media on HS boardsRyan Eatmon2023-10-091-3/+30
| | | | | | | | | | The previous patch is incorrectly accepted and released. This patch applies the logic that was discussed on the mailing list. - Create a new variable grouping for SPL_HS_MLO - Update the install/deploy code to reference the new variables. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot: set the correct latest LIC_FILES_CHKSUM genericallyDenys Dmytriyenko2023-10-051-1/+1
| | | | | | | | | | | | | | | The common u-boot-ti.inc file still uses the old license checksum from 2021 U-boot. There were formatting changes in the license text between 2021 and 2023 and version-specific recipes had the license checksum updated to the new value. Since there are no 2021 recipes remaining, the new license checksum can be set in the common .inc file generically. Note: U-boot license hasn't changed and the same checksum is simply being moved from the recipes to the common .inc file. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Fix SPL binary name for SD/MMC media on HS boardsJulien Panis2023-09-291-3/+3
| | | | | | | | | The SPL binary built by u-boot for SD/MMC/eMMC media on HS platforms is u-boot-spl_HS_MLO. Thanks to this fix, the binary is properly installed and deployed. Signed-off-by: Julien Panis <jpanis@baylibre.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-bsp: u-boot-ti.inc: Remove ti-sci-fw from DEPENDS for k3 machineAniket Limaye2023-09-291-1/+0
| | | | | | | | ti-sci-fw should be needed by the binman u-boot build only for the k3r5 machines and not for the k3 machines Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* k3r5: u-boot: prevent overlapping deployed SPL symlinksDenys Dmytriyenko2023-09-221-14/+1
| | | | | | | | | | | | Make sure shortname R5 SPL symlink is not the same as the main K3 SPL one, as they will overlap/overwrite each other when deployed into a common location. Latest code in master now checks for this and errors out. Also remove unused UBOOT_SPI_* variables. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-bsp: u-boot: Add u-boot-mergeconfig.inc to handle fragment u-boot configChirag Shilwant2023-09-201-0/+1
| | | | | | | | | | | | | | | | - U-boot recipe in OE-Core supports out-of-tree config fragments that are passed via SRC_URI and automatically merges all *.cfg files as fragments. This makes specifying config fragments in the machine configuration a bit difficult. Hence, add a logic which will ensure we handle u-boot config fragments using a new variable UBOOT_CONFIG_FRAGMENTS. - The u-boot-mergeconfig.inc will allow us to build u-boot with list of config fragments specified in UBOOT_CONFIG_FRAGMENTS along with the base defconfig mentioned in UBOOT_MACHINE. - Include u-boot-mergeconfig.inc in u-boot-ti.inc Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-extras: Add support for extra kernel/u-boot featuresParesh Bhagat2023-06-141-1/+1
| | | | | | | | | | | | | | | | There are some features that will either never be accepted into the upstream kernel, or are not ready to be accepted. ti-extras allows for controlling the kernel and u-boot repos, breanches, and srcrevs to gain access to those features via the TI_EXTRAS variable in the local.conf file. Initial support for TI_EXTRAS=tie-jailhouse is being added by this patch. Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Acked-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Use binman to package our firmwareAndrew Davis2023-06-061-2/+25
| | | | | Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-dm-fw: Add recipe for TI DM firmwareAndrew Davis2023-06-061-1/+1
| | | | | | | Split out the TI DM firmware from ti-rtos-firmware. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-rtos-firmware: Use the same directory structure as linux-firmwareAndrew Davis2023-04-201-1/+11
| | | | | | | | | | | | Currently we move this firmware around and put it in a directories named pdk-ipc/ and ethfw/. This does not match what is in linux-firmware which is what projects should expect /lib/firmware to match. This causes issues for projects that want to work both on meta-ti and also on any other distro. Switch to shipping the same directory structure as linux-firmware here. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add am62axx evm configurationParesh Bhagat2023-03-201-0/+1
| | | | | | | | | | | | | | | Lets add the basic AM62Axx-evm configuration. - Add configurations. - Add firmware overrides. - Add u-boot overrides. - Add tifs-lpm-stub. - Add cnm-wave-fw. Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com> Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Use new ti-secdev class to sign the imagesAndrew Davis2023-03-011-2/+1
| | | | | | | | | | | | Use the new ti-k3-secdev package to pull in the signing tools if they are not provided by the environment. This allows us to use these tools unconditionally. Remove the checks for the script and do the signing for all K3 machines. The signature is automatically stripped from the binaries on non-HS devices at boot time as needed so this change is harmless for GP devices. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Use new J7 SoC names over specific board namesAndrew Davis2023-01-201-1/+4
| | | | | | | | | | | | | | | | Now that we have SoC names, we can avoid adding features based on the board name. We expect folks to create their own boards based on these SoCs, and so using the TI made EVM board name everywhere adds extra churn when adding a new board. Plus it is more correct for most of these features as they depend on the SoC, not on the EVM board. One other thing we do here is to not use the generic "j7" name, the current and future J7 devices are far to feature diverse to group at this level. Grouping like that will lead to the wrong things getting enabled as new J7 SoCs are added. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf/machine/omapl138: correct few of the machine settingsDenys Dmytriyenko2022-11-151-1/+0
| | | | | | | | | | | | Cleanup and unify again - omapl138-lcdk is the only platform supported in the OMAP-L1 family. Plus there's no longer DaVinci family with corresponding settings. Adjust accordingly. Please note, there's currently a bug building Rust on ARMv5 platforms: https://bugzilla.yoctoproject.org/show_bug.cgi?id=14967 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* all: Stop using git://git.ti.comRyan Eatmon2022-11-101-2/+2
| | | | | | | | | | | | Stop using un-encrypted git:// protocol to access TI repositories. This is inline with the same arguments as made by github in https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: k3r5: Make combined R5 boot the defaultAndrew Davis2022-11-101-45/+6
| | | | | | | | | | | | | Going forward, the combined tiboot3.bin is going to be the standard. Only AM65x and J721e will still use the split boot. Set the output of U-Boot to be u-boot-spl.bin by default and override only for the two split boot platforms. This makes it easier to add new platforms and simplifies deployment logic. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Do not prepend output files with DEPLOYDIRAndrew Davis2022-09-221-18/+18
| | | | | | | | | | We already cd into DEPLOYDIR so this is not needed. This now matches the keystone version below. Also fixes build in some odd situations. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* kernel u-boot: Fix formulation of LOCALVERSIONRyan Eatmon2022-09-221-1/+1
| | | | | | | | | | | | devtool does not work with the current formulation of the LOCALVERSION variables. We need to use SRCPV to avoid AUTOREV on bleeding builds, but there will be no + in the string, so we cannot split on that. Just use SRCPV directly. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* j721s2-hs: changes to support new hs platformJayesh Choudhary2022-09-221-0/+6
| | | | | | | | | | | | | Changes to support new j721s2-hs platform in: 1) ti-sci-fw_git: Update firmware prefix for j721s2-hs 2) atf: sign the image 3) u-boot: Add u-boot-spl image for combined boot image 4) optee: sign the image Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Use SRCPV instead of SRCREV for U_BOOT_LOCAL_VERSIONNishanth Menon2022-05-101-1/+1
| | | | | | | | | | | | | | | | | SRCREV works with fixed commits, but when we use AUTOREV for a downstream distro bbappend, we will end up getting a bad local revision. Lets use SRCPV instead, which bitbake already deals with sensibly. [1] https://www.yoctoproject.org/docs/2.5.1/dev-manual/dev-manual.html#automatically-incrementing-a-binary-package-revision-number Fixes: 39fa0c1d3d02 ("u-boot-ti: Use SRCREV to get short commit ID") Suggested-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Use SRCREV to get short commit IDDevarsh Thakkar2022-05-021-9/+1
| | | | | | | | | | | | | | Due to recent security update in git, we are not able to fetch revision currently using existing method: https://github.blog/2022-04-12-git-security-vulnerability-announced/ So instead, use the SRCREV to parse the short commit ID and set the UBOOT_LOCALVERSION variable. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add am62xx evm configurationNishanth Menon2022-05-021-0/+7
| | | | | | | | | | | | | | | Lets add the basic AM62xx-evm configuration. - Add configurations. - Add firmware overrides. - Add u-boot overrides. - Update TI_LINUX_FW_SRCREV and K3_IMAGE_GEN_SRCREV to appropriate SHAs. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: convert licenses to SPDX formatDenys Dmytriyenko2022-02-251-1/+1
| | | | | | | Update LICENSE variable to use SPDX license identifiers. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Support binman image generationRoger Quadros2022-02-221-1/+1
| | | | | | | | | | | | | | | We are now using binman to generate the images for K3 AM64 in u-boot. tools/binman/binman needs python3-setuptools so add it to DEPENDS. Reported-by: Praneeth Bajjuri <praneeth@ti.com> Suggested-by: Denys Dmytriyenko <denis@denix.org> Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add j721s2 evm configurationNishanth Menon2022-02-221-0/+6
| | | | | | | Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti: create a sub-layer meta-ti-bsp from existing contentDenys Dmytriyenko2022-02-221-0/+290
Extra sub-layers will be created next and relevant content moved across them. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-10 09:47:50 +0000