summaryrefslogtreecommitdiffstats
path: root/meta-ti-bsp/recipes-bsp
Commit message (Collapse)AuthorAgeFilesLines
...
* meta-ti-bsp: BeagleBoard-u-boot switch to GitHub mirrorRobert Nelson2023-04-041-1/+1
| | | | | | | | | BeagleBoard.org use the new u-boot mirror on GitHub https://github.com/beagleboard/u-boot as https://git.beagleboard.org/ easily becomes overloaded Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Add 2023.04 in prep for LTS migrationRyan Eatmon2023-03-311-0/+11
| | | | | | | | | | | We are preparing to migrate our u-boot version to 2023.04. As we are still working on the migration, mark the default preference low for this version. We will enable building with this u-boot in a meta-arago brand in the near future. Once the migration is complete, we will remove the 2021.01 u-boot and make this the default. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
* trusted-firmware-a: Only sign files for platforms that support itRyan Eatmon2023-03-311-2/+38
| | | | | | | | We are seeing some testing issues where the new code that signs all of the files at all times is causing issues. So rollback the logic and only sign for platforms that support it. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Fix u-boot configs to match oe-core fitImageRyan Eatmon2023-03-312-1/+151
| | | | | | | | | | | After moving to the oe-core kernel-fitimage.bbclass we found that the dtb names we were searching for did not match. This was due to the KERNEL_DEVICETREE entries including the vendor subdir in the section names of the fitImage file. This patch updates support in 2021 so that we can temporarily get to a stable boot point before starting our LTS migration and changing a lot of things in the recipes. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Fix some syntax issuesRyan Eatmon2023-03-211-2/+2
| | | | | | | Fixing some syntax issues from the last dunfell to kirkstone sync up patch series. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: update to the latest from DunfellDenys Dmytriyenko2023-03-211-1/+1
| | | | | | | Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: update to the latest from DunfellDenys Dmytriyenko2023-03-211-2/+2
| | | | | | | Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j784s4-evm: Add support for J784S4 HS-FSDasnavis2023-03-211-1/+2
| | | | | | | | | | | | | Add the basic J784S4 HS-FS configuration. * Add configurations to support both HS-FS and GP keeping GP as default. * Add ti-sci-firmware overrides for HS-FS. * Remove evm conf file inclusion in hs-evm conf. * Add j784s4 hs-evm specific config to hs-evm conf. Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62axx-evm: Add AM62A HS-FS evm configurationSai Sree Kartheek Adivi2023-03-211-1/+3
| | | | | | | | | | | | | | | Lets add the basic AM62A configuration - Add machine conf for AM62A. - The wic images will boot on AM62A HS-FS devices by default. - The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively. - Add ti-sci-firmware overrides. - Sign ATF, OPTEE and RTOS Firmware. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721s2-evm: Add support for J721S2 HS-FSSinthu Raja2023-03-211-1/+2
| | | | | | | | | | | | | | | Add the basic J721S2 HS-FS configuration. - Add configurations to support both HS-FS and GP keeping GP as default. - Add ti-sci-firmware overrides for HS-FS. - Remove evm conf file inclusion in hs-evm conf. - Add j721s2 hs-evm specific config to hs-evm conf. Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Add SYSFW_SUFFIX to sysfw.itb filesRyan Eatmon2023-03-211-2/+18
| | | | | | | | | | | | | With the advent of using multiconfigs to build all of the versions of the machines (gp, hs-se, hs-fs, etc...) the sysfw.itb has become a point of contention for do_deploy. To resolve the duplicate file copy errors from bitbake we need to uniquify the sysfw.itb file names. So, let's do the same thing we do with the tiboot3.bin file and add the SYSFW_SUFFIX into the name. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-lp-evm: Add AM62x LP HS-FS evm configurationChirag Shilwant2023-03-211-0/+1
| | | | | | | | | | | | | | Lets add the basic AM62x LP HS-FS configuration - Add machine conf for AM62x LP HS-FS. - The wic images will boot on AM62x LP HS-FS devices by default. - The sysfw image for HS-SE will be packaged in the wic image as tiboot3-am62x-hs-evm.bin. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* am62xx-evm: Add AM62x HS-FS evm configurationChirag Shilwant2023-03-211-0/+1
| | | | | | | | | | | | | | Lets add the basic AM62x HS-FS configuration - Add machine conf for AM62x HS-FS. - The wic images will boot on AM62x HS-FS devices by default. - The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62x-gp-evm.bin and tiboot3-am62x-hs-evm.bin respectively. - Add ti-sci-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62x HS-SE evm configurationChirag Shilwant2023-03-211-1/+2
| | | | | | | | | | | | | | | | | Lets add the basic AM62x HS-SE configuration. - Add machine conf for AM62x HS-SE. - The wic images will boot on AM62x GP devices by default. - To boot on AM62x HS-SE, simply switch out the SYSFW image: $ cd /mnt/sd-card/boot $ mv tiboot3-am62x-hs-evm.bin tiboot3.bin - Add ti-sci-firmware overrides. - Add support to sign ATF and OPTEE. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: upgrade to v2.8+Judith Mendez2023-03-211-2/+2
| | | | | | | | | | | | | | | | | Upgrade arm-trusted-firmare to v2.8-226-g2fcd408bb. This upgrade picks up K3 L2 cache, snoop delayed, and EA handling updates from upstream master. Do not update to tip of master due to PSCI system off support breaking AM62x and AM62q platforms. Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Tested-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* hs: Deploy the unsigned versions of bl31 and bl32Ryan Eatmon2023-03-211-0/+12
| | | | | | | | | In addition to releasing the signed versions of the bl31.bin and bl32.bin files, also release the unsigned original versions. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add AM62Q HS-SE evm configurationChirag Shilwant2023-03-211-0/+1
| | | | | | | | | | | | | | Lets add the basic AM62Q HS-SE configuration. - Add configurations. - Add ti-sci-firmware overrides. - Add u-boot overrides. - Add optee overrides. - Add ti-rtos-firmware overrides. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add am62axx evm configurationParesh Bhagat2023-03-214-2/+4
| | | | | | | | | | | | | | | Lets add the basic AM62Axx-evm configuration. - Add configurations. - Add firmware overrides. - Add u-boot overrides. - Add tifs-lpm-stub. - Add cnm-wave-fw. Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com> Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* j784s4-hs: changes to support new hs platformManorit Chawdhry2023-03-211-0/+1
| | | | | | | | | | | | | Changes to support new j784s4-hs platform in: 1) ti-sci-fw_git: Update firmware prefix for j784s4-hs 2) atf: sign the image 4) optee: sign the image Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use new ti-secdev class to sign the imagesAndrew Davis2023-03-011-6/+2
| | | | | | | | Use the new ti-k3-secdev package to pull in the signing tools if they are not provided by the environment. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Use new ti-secdev class to sign the imagesAndrew Davis2023-03-011-2/+1
| | | | | | | | | | | | Use the new ti-k3-secdev package to pull in the signing tools if they are not provided by the environment. This allows us to use these tools unconditionally. Remove the checks for the script and do the signing for all K3 machines. The signature is automatically stripped from the binaries on non-HS devices at boot time as needed so this change is harmless for GP devices. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Use new ti-secdev class to sign the imagesAndrew Davis2023-03-011-32/+7
| | | | | | | | | | | | Use the new ti-k3-secdev package to pull in the signing tools if they are not provided by the environment. This allows us to use these tools unconditionally. Remove the checks for the script and do the signing for all K3 machines. The signature is automatically stripped from the binaries on non-HS devices at boot time as needed so this change is harmless for GP devices. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: update to the latestAndrew Davis2023-03-011-10/+6
| | | | | | | | | While here update FW versions and remove those no longer used. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Tested-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: graphics: Resolve dependency chainRandolph Sapp2023-02-242-15/+13
| | | | | | | | | | Patched mesa will now be configured based on what virtual/gpudriver preferred provider is selected. The gpu drivers will now runtime recommend the associated UM components. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Revert "meta-ti-bsp: graphics: Resolve dependency chain"Denys Dmytriyenko2023-02-213-13/+43
| | | | | | | | | Merged by accident. This reverts commit 15417ca726f75881a2c51c08d258ea923803cbb9. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: graphics: Resolve dependency chainRandolph Sapp2023-02-163-44/+13
| | | | | | | | | Patched mesa will now be configured based on what virtual/gpudriver preferred provider is selected. The gpu drivers will now runtime recommend the associated um components. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* uio-module-drv: Remove deprecated uio-module-drvAndrew Davis2023-02-163-74/+0
| | | | | | | | | | UIO drivers are generally frowned upon in the community, and for PRU we now have much better alternatives in RProc, RPmsg, and PRU-Consumer. Let's not send the wrong message by continuing to support this crufty interface. Remove the kernel module, DTBs, and test recipe. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: add BeagleBone AI-64 supportDenys Dmytriyenko2023-01-312-0/+17
| | | | | | | | | | | | | BeagleBone AI-64 (https://beagleboard.org/ai-64) uses Texas Instruments Jacinto TDA4VM/J721e SoC. Officially BeagleBone AI-64 supports Debian Linux and builds its BSP on top of meta-ti and TI SDK, but adds custom DTBs and DTBO overlays, plus integrates other drivers and features. Let's add corresponding recipes for beagleboard.org kernel and u-boot along with the BeagleBone AI-64 machine config. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: sets TI_K3_SECDEV_INSTALL_DIR default valueJose Quaresma2023-01-311-0/+2
| | | | | | | | | | The TI_K3_SECDEV_INSTALL_DIR is defined on the meta-ti-extras layer so when the layer is not used the variable is undefined. For such cases we can use default value that is the same defined on the recipes-ti/includes/ti-paths.inc Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: Use new J7 SoC names over specific board namesAndrew Davis2023-01-243-4/+6
| | | | | | | | | | | | | | | | Now that we have SoC names, we can avoid adding features based on the board name. We expect folks to create their own boards based on these SoCs, and so using the TI made EVM board name everywhere adds extra churn when adding a new board. Plus it is more correct for most of these features as they depend on the SoC, not on the EVM board. One other thing we do here is to not use the generic "j7" name, the current and future J7 devices are far to feature diverse to group at this level. Grouping like that will lead to the wrong things getting enabled as new J7 SoCs are added. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Add am57xx.inc allowing use of SoC name over full EVM nameAndrew Davis2023-01-244-13/+8
| | | | | | | | | | In many spots we have to use the full EVM name for each EVM using the AM57x SoC leading to missed features on some EVMs. Add the am57xx name so we can generically add for AM57x. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: make dependency on meta-ti-extras softDenys Dmytriyenko2022-12-011-2/+2
| | | | | | | | | | | | | | | | | | Replace "require" with "include" to load ti-paths.inc and not break parsing when meta-ti-extras is not in the BBLAYERS list. As ti-paths.inc is only needed to define TI_K3_SECDEV_INSTALL_DIR for ti-k3-secdev when TI_SECURE_DEV_PKG_K3 is not set and building for K3 HS platforms. Since ti-k3-secdev resides in meta-ti-extras, the soft dependency will still work fine and give a build error "Nothing PROVIDES 'ti-k3-secdev-native'" when it is needed. Also, since TI_K3_SECDEV_INSTALL_DIR can now be undefined, use d.getVar() to access it ensuring it doesn't break the condition. Reported-by: Daniel Díaz <mrchapp@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf/machine/omapl138: correct few of the machine settingsDenys Dmytriyenko2022-11-231-1/+0
| | | | | | | | | | | | Cleanup and unify again - omapl138-lcdk is the only platform supported in the OMAP-L1 family. Plus there's no longer DaVinci family with corresponding settings. Adjust accordingly. Please note, there's currently a bug building Rust on ARMv5 platforms: https://bugzilla.yoctoproject.org/show_bug.cgi?id=14967 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cmem-mod: Remove CMEM kernel moduleAndrew Davis2022-11-232-20/+0
| | | | | | | | | | | | | | CMEM has been deprecated for removal for some time now. All users should have migrated to the Linux upstream DMA-BUF Heaps framework. Remove CMEM. We only remove the kernel module part in this patch to prevent builds from breaking in the meta-arago layer due to dependencies on the CMEM library. These packages should either be updated or disabled. After that we will remove the library. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-driver: Bump the source revisionRandolph Sapp2022-11-231-1/+1
| | | | | | | | | | | | | Bump the source revision for the rogue pvr kernel module. Source changelog: - A hack was added to increase stability on J7 platforms while we are looking into a proper fix for cache coherency issues in this module Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: use getVar() to check if TI_SECURE_DEV_PKG_K3 is definedDenys Dmytriyenko2022-11-231-1/+1
| | | | | | | | | Otherwise undefined variable is returned literally as ${TI_SECURE_DEV_PKG_K3} and the condition won't work. Cc: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: update to the latestDenys Dmytriyenko2022-11-231-1/+1
| | | | | | | This matches current version in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: update to the latestDenys Dmytriyenko2022-11-231-2/+2
| | | | | | | This matches current version in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cnm-wave-fw: update firmware name to wave521c_k3_codec_fw.binRyan Eatmon2022-11-231-3/+1
| | | | | | | | | | | | | update firmware name to wave521c_k3_codec_fw.bin to align with linux-firmware main branch. the following patch is part of ti-linux-firmware thru mainline sync. commit 48407ffd ("cnm: update chips&media wave521c firmware.") Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-driver: drop local patch as upstream is now fixedDenys Dmytriyenko2022-11-232-35/+0
| | | | | Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-*: Bump the graphics recipesRandolph Sapp2022-11-231-6/+2
| | | | | | | | | | | Bump the graphics recipes source revision and remove the old BVNC switch. The BVNC is now baked into the platform Makefile that is selected with PVR_BUILD_DIR / TARGET_PRODUCT. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Update to latest upstream masterAndrew Davis2022-11-231-1/+1
| | | | | | | | | Notable changes include support for J784s4. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add j784s4-evm configuration.Ryan Eatmon2022-11-234-4/+8
| | | | | | | | | | | | | | | Adding support for j784s4-evm: - Add configurations. - Add firmware. - Add u-boot. - Add gpu support. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cadence-mhdp-fw: Add dependency for j721s2Rahul T R2022-11-231-1/+1
| | | | | | | | | | cdns mhdp bridge is present in j721s2 soc. Add the dependency for the same Signed-off-by: Rahul T R <r-ravikumar@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use d.getVar() in DEPENDS expressionRandolph Sapp2022-11-231-1/+1
| | | | | | | | | | | | Switch the DEPENDS_append expression to use d.getVar() instead of the usual variable expansion to prevent the inline Python command from becoming mangled. Signed-off-by: Randolph Sapp <rs@ti.com> Acked-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: add am62xx-lp-evm configurationAnand Gadiyar2022-11-232-1/+2
| | | | | | | | | | | | | | | This platform is similar to the currently supported am62xx-evm, except that we currently need new defconfigs for u-boot and new dtbs in the filesystem. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Hari Nagalla <hnagalla@ti.com> Cc: Andrew Davis <afd@ti.com> Cc: Praneeth Bajjuri <praneeth@ti.com> Cc: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* all: Stop using git://git.ti.comRyan Eatmon2022-11-2312-16/+16
| | | | | | | | | | | | Stop using un-encrypted git:// protocol to access TI repositories. This is inline with the same arguments as made by github in https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx-evm: Make HS-SE the defaultAndrew Davis2022-11-231-1/+1
| | | | | | | | | | | | The HS-SE AM64xx machine can now be run on GP devices and built without needing the TI_SECURE_DEV_PKG for the same. AM64xx will only be available in the HS-FS type going forward. Make the HS-SE the default and remove the original GP machine. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Update to the latest ti-u-boot-2021.01Andrew Davis2022-11-231-2/+2
| | | | | | | | | | | | | | Update to the latest commit of ti-u-boot-2021.01. As part of this U-Boot update the non-HS AM64x-evm defconfig was removed. This is okay as building this defconfig without defining TI_SECURE_DEV_PKG will still result in usable binaries for the non-HS devices. Use the HS defconfig for both the HS and non-HS machines. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use ti-k3-secdev if TI_SECURE_DEV_PKG_K3 is not definedAndrew Davis2022-11-231-1/+3
| | | | | | | Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-09 12:23:20 +0000