summaryrefslogtreecommitdiffstats
path: root/meta-ti-bsp/recipes-bsp
Commit message (Collapse)AuthorAgeFilesLines
...
* meta-ti-bsp: Add am57xx.inc allowing use of SoC name over full EVM nameAndrew Davis2023-01-244-13/+8
| | | | | | | | | | In many spots we have to use the full EVM name for each EVM using the AM57x SoC leading to missed features on some EVMs. Add the am57xx name so we can generically add for AM57x. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: make dependency on meta-ti-extras softDenys Dmytriyenko2022-12-011-2/+2
| | | | | | | | | | | | | | | | | | Replace "require" with "include" to load ti-paths.inc and not break parsing when meta-ti-extras is not in the BBLAYERS list. As ti-paths.inc is only needed to define TI_K3_SECDEV_INSTALL_DIR for ti-k3-secdev when TI_SECURE_DEV_PKG_K3 is not set and building for K3 HS platforms. Since ti-k3-secdev resides in meta-ti-extras, the soft dependency will still work fine and give a build error "Nothing PROVIDES 'ti-k3-secdev-native'" when it is needed. Also, since TI_K3_SECDEV_INSTALL_DIR can now be undefined, use d.getVar() to access it ensuring it doesn't break the condition. Reported-by: Daniel Díaz <mrchapp@gmail.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf/machine/omapl138: correct few of the machine settingsDenys Dmytriyenko2022-11-231-1/+0
| | | | | | | | | | | | Cleanup and unify again - omapl138-lcdk is the only platform supported in the OMAP-L1 family. Plus there's no longer DaVinci family with corresponding settings. Adjust accordingly. Please note, there's currently a bug building Rust on ARMv5 platforms: https://bugzilla.yoctoproject.org/show_bug.cgi?id=14967 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cmem-mod: Remove CMEM kernel moduleAndrew Davis2022-11-232-20/+0
| | | | | | | | | | | | | | CMEM has been deprecated for removal for some time now. All users should have migrated to the Linux upstream DMA-BUF Heaps framework. Remove CMEM. We only remove the kernel module part in this patch to prevent builds from breaking in the meta-arago layer due to dependencies on the CMEM library. These packages should either be updated or disabled. After that we will remove the library. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-driver: Bump the source revisionRandolph Sapp2022-11-231-1/+1
| | | | | | | | | | | | | Bump the source revision for the rogue pvr kernel module. Source changelog: - A hack was added to increase stability on J7 platforms while we are looking into a proper fix for cache coherency issues in this module Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: use getVar() to check if TI_SECURE_DEV_PKG_K3 is definedDenys Dmytriyenko2022-11-231-1/+1
| | | | | | | | | Otherwise undefined variable is returned literally as ${TI_SECURE_DEV_PKG_K3} and the condition won't work. Cc: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: update to the latestDenys Dmytriyenko2022-11-231-1/+1
| | | | | | | This matches current version in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: update to the latestDenys Dmytriyenko2022-11-231-2/+2
| | | | | | | This matches current version in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cnm-wave-fw: update firmware name to wave521c_k3_codec_fw.binRyan Eatmon2022-11-231-3/+1
| | | | | | | | | | | | | update firmware name to wave521c_k3_codec_fw.bin to align with linux-firmware main branch. the following patch is part of ti-linux-firmware thru mainline sync. commit 48407ffd ("cnm: update chips&media wave521c firmware.") Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-driver: drop local patch as upstream is now fixedDenys Dmytriyenko2022-11-232-35/+0
| | | | | Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-*: Bump the graphics recipesRandolph Sapp2022-11-231-6/+2
| | | | | | | | | | | Bump the graphics recipes source revision and remove the old BVNC switch. The BVNC is now baked into the platform Makefile that is selected with PVR_BUILD_DIR / TARGET_PRODUCT. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Update to latest upstream masterAndrew Davis2022-11-231-1/+1
| | | | | | | | | Notable changes include support for J784s4. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: Add j784s4-evm configuration.Ryan Eatmon2022-11-234-4/+8
| | | | | | | | | | | | | | | Adding support for j784s4-evm: - Add configurations. - Add firmware. - Add u-boot. - Add gpu support. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cadence-mhdp-fw: Add dependency for j721s2Rahul T R2022-11-231-1/+1
| | | | | | | | | | cdns mhdp bridge is present in j721s2 soc. Add the dependency for the same Signed-off-by: Rahul T R <r-ravikumar@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use d.getVar() in DEPENDS expressionRandolph Sapp2022-11-231-1/+1
| | | | | | | | | | | | Switch the DEPENDS_append expression to use d.getVar() instead of the usual variable expansion to prevent the inline Python command from becoming mangled. Signed-off-by: Randolph Sapp <rs@ti.com> Acked-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: add am62xx-lp-evm configurationAnand Gadiyar2022-11-232-1/+2
| | | | | | | | | | | | | | | This platform is similar to the currently supported am62xx-evm, except that we currently need new defconfigs for u-boot and new dtbs in the filesystem. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Hari Nagalla <hnagalla@ti.com> Cc: Andrew Davis <afd@ti.com> Cc: Praneeth Bajjuri <praneeth@ti.com> Cc: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* all: Stop using git://git.ti.comRyan Eatmon2022-11-2312-16/+16
| | | | | | | | | | | | Stop using un-encrypted git:// protocol to access TI repositories. This is inline with the same arguments as made by github in https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am64xx-evm: Make HS-SE the defaultAndrew Davis2022-11-231-1/+1
| | | | | | | | | | | | The HS-SE AM64xx machine can now be run on GP devices and built without needing the TI_SECURE_DEV_PKG for the same. AM64xx will only be available in the HS-FS type going forward. Make the HS-SE the default and remove the original GP machine. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Update to the latest ti-u-boot-2021.01Andrew Davis2022-11-231-2/+2
| | | | | | | | | | | | | | Update to the latest commit of ti-u-boot-2021.01. As part of this U-Boot update the non-HS AM64x-evm defconfig was removed. This is okay as building this defconfig without defining TI_SECURE_DEV_PKG will still result in usable binaries for the non-HS devices. Use the HS defconfig for both the HS and non-HS machines. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use ti-k3-secdev if TI_SECURE_DEV_PKG_K3 is not definedAndrew Davis2022-11-231-1/+3
| | | | | | | Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: upgrade to v2.7Praneeth Bajjuri2022-11-231-2/+2
| | | | | | | | | | upgrade arm-trusted-firmare to v2.7 Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Tested-by: Judith Mendez <jm@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Add am65xx-evm-k3r5-sr2 to combined R5 boot listAndrew Davis2022-11-231-0/+2
| | | | | | | | | | | This machine was missed when making combined R5 boot the default. Add this machine to fix build failure. Reported-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Only deploy the raw SYSFW images for one machine targetAndrew Davis2022-11-231-2/+2
| | | | | | | | | | | | This recipe deploys the raw SYSFW unconditionally which causes issues when doing multiconfig builds. What should happen is only one deploys these, select that the same way we select which one deploys the default SYSFW symlink. Move the deploy step there. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Only install and deploy combined boot symlink when setAndrew Davis2022-11-231-2/+7
| | | | | | | | | | | Add SYSFW_TIBOOT3_SYMLINK and use it the same way we use SYSFW_SYMLINK for the non-combined boot flow, to allow not setting the default for some machine types. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Make combined R5 boot the defaultAndrew Davis2022-11-231-16/+14
| | | | | | | | | | | | | | Going forward, the combined tiboot3.bin is going to be the standard. Only AM65x and J721e will still use the split boot. Set DEPENDS and EXTRA_OEMAKE for combined boot and override only for the two split boot platforms. This makes it easier to add new platforms and simplifies deployment logic. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use SYSFW_TIBOOT3 to point to the SYSFW imageAndrew Davis2022-11-231-8/+8
| | | | | | | | | | | | Currently we reuse UBOOT_* names which usually are the same we want to give to the name of the SYSFW binary. This isn't always correct, we should use a SYSFW specific variable in case the UBOOT names are changed. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Deploy all SYSFW firmware typesAndrew Davis2022-11-231-16/+12
| | | | | | | | | | This allows us to rebuild and re-sign the SYSFW image if needed from the deploy directory for any SoC type. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sci-fw: Use new SOC_TYPE and SYSFW_DIR to simplify recipeAndrew Davis2022-11-232-121/+28
| | | | | | | | | | | | | | | | | | | The k3-image-gen now has two new helper flags SOC_TYPE and SYSFW_DIR that we can use to simplify this recipe. With these we do not need to do anything different here for HS builds, the SOC_TYPE selects this now. DL_URL also do not need cleared anymore, the k3-image-gen will no longer download missing files when not needed for the current build type. do_install and do_deploy can also check for the existence of either sysfw.itb or tiboot3.bin and install/deploy as needed. k3-image-gen only gerneates the right one now depending on the SoC. Merge all these steps for all SoCs. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* machine: k3r5: Make combined R5 boot the defaultAndrew Davis2022-11-231-45/+6
| | | | | | | | | | | | | Going forward, the combined tiboot3.bin is going to be the standard. Only AM65x and J721e will still use the split boot. Set the output of U-Boot to be u-boot-spl.bin by default and override only for the two split boot platforms. This makes it easier to add new platforms and simplifies deployment logic. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-mainline: update to the latest 2022.10Denys Dmytriyenko2022-11-231-3/+3
| | | | | | | | Update to the latest release version. bzip2 license was added to the list, update checksum. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot: drop 2020.01Denys Dmytriyenko2022-11-231-7/+0
| | | | | | | Deprecated in favor of 2021.01 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot: Remove lzop dependencyRyan Eatmon2022-10-171-1/+1
| | | | | | | | lzop support has been moved from oe-core to meta-oe. Since we are not setting FIT_KERNEL_COMP_ALG and (for minimal poky builds) we would like to not require meta-oe just for this, just remove the dependency entirely. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: work around RWX permission error on segmentRyan Eatmon2022-10-172-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | Binutils 2.39 now warns when a segment has RXW permissions[1]: aarch64-none-elf-ld.bfd: warning: bl31.elf has a LOAD segment with RWX permissions However, TF-A passes --fatal-warnings to LD, so this is a build failure. There is a ticket filed upstream[2], so until that is resolved we can disable this warning. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107 [2] https://developer.trustedfirmware.org/T996 Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Jon Mason <jon.mason@arm.com> Adapted from the above patch[3] in meta-arm, but we cannot use that patch as we are on an older SRCREV and the Makefile has changed. [3] https://git.yoctoproject.org/meta-arm/commit/meta-arm/recipes-bsp?id=977c5222d8c2f6f6c7e522e480a6e4cd40ba32d7 Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* prueth-fw: Deploy for AM64xx based on SoC not EVMAndrew Davis2022-09-221-1/+1
| | | | | | | | | | This makes sense but looks like was done wrong to match AM65xx which needed the exact EVM specified due to this only working on SR2. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Allow build to continue without TI_SECURE_DEV_PKG setAndrew Davis2022-09-221-22/+16
| | | | | | | Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti: Do not prepend output files with DEPLOYDIRAndrew Davis2022-09-221-18/+18
| | | | | | | | | | We already cd into DEPLOYDIR so this is not needed. This now matches the keystone version below. Also fixes build in some odd situations. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: Bump to 08.04.01.001 releaseRyan Eatmon2022-09-221-1/+1
| | | | | | | | Updated the ti-linux-fw version for 08.04.01.001 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: CI/CD Auto-Merger: cicd.2022.07.30.15:19:12LCPD Automation Script2022-09-221-1/+1
| | | | | | | | | Updated the value(s) for: SRCREV Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: Create K3_IMAGE_GEN_BRANCH variableRyan Eatmon2022-09-221-1/+3
| | | | | | | | | For the upcoming CICD flow we need to control the branch for all of the needed packages. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* cadence-mhdp-fw: Lock firmware to j721eRyan Eatmon2022-09-221-1/+1
| | | | | | | | | This firmware is only applicable to the j721e platform and not all j7 devices. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Bump to 08.04.00.005 releaseRyan Eatmon2022-09-221-2/+2
| | | | | | | | Updated the u-boot version for 08.04.00.005 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* kernel u-boot: Fix formulation of LOCALVERSIONRyan Eatmon2022-09-221-1/+1
| | | | | | | | | | | | devtool does not work with the current formulation of the LOCALVERSION variables. We need to use SRCPV to avoid AUTOREV on bleeding builds, but there will be no + in the string, so we cannot split on that. Just use SRCPV directly. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* j7200-hs-evm-k3r5: Move J7200 HS evm support to PG2.0Jonathan Humphreys2022-09-221-1/+1
| | | | | | | | | | With J7200 PG1.0 being deprecated, use PG2.0 sysfw when building images for j7200-hs-evm. Also update k3-image-gen version to support this change. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-encode-decode: Lock test app to j7-evmRyan Eatmon2022-09-222-2/+2
| | | | | | | | | | The test app is not compatible with later versions of j7, so add COMPATIBLE_MACHINE to lock these recipes down to just j721e. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Bump to 08.04.00.004 releaseRyan Eatmon2022-09-221-2/+2
| | | | | | | | Updated the u-boot version for 08.04.00.004 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Bump to 08.04.00.003 releaseRyan Eatmon2022-09-221-2/+2
| | | | | | | | Updated the u-boot version for 08.04.00.003 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: CI/CD Auto-Merger: cicd.2022.06.28.12:11:17LCPD Automation Script2022-09-221-1/+1
| | | | | | | | | Updated the value(s) for: SRCREV Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-linux-fw: Bump to 08.04.00.002 releaseRyan Eatmon2022-09-221-2/+2
| | | | | | | | Updated the ti-linux-fw version for 08.04.00.002 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Bump to 08.04.00.002 releaseRyan Eatmon2022-09-221-2/+2
| | | | | | | | Updated the u-boot version for 08.04.00.002 Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Update to latest upstream masterAndrew Davis2022-09-221-5/+3
| | | | | | | | | | | | | For TF-A we work against upstream first, our fork has only been used in the rare cases we need to ship a feature before we can get it upstream. This is not currently the case so lets switch to upstream repo until there is a need for our fork. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-09 19:39:05 +0000