summaryrefslogtreecommitdiffstats
path: root/meta-ti-bsp
Commit message (Collapse)AuthorAgeFilesLines
...
* conf: machine: j721s2/j784s4: Pick overlays for DS90UB954Yemike Abhilash Chandra2025-02-262-0/+2
| | | | | | | | DS90UB954-Q1EVM can be used to connect FPDLink-III based sensors to TI EVMs. So pick the DS90UB954-Q1EVM overlay. Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j721e-evm: Pick overlays for DS90UB954Yemike Abhilash Chandra2025-02-261-0/+1
| | | | | | | | DS90UB954-Q1EVM can be used to connect FPDLink-III based sensors to TI EVMs. So pick the DS90UB954-Q1EVM overlay. Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Disable TFA_SPD for AM62LChirag Shilwant2025-02-211-0/+1
| | | | | | | | | OPTEE support for the am62lxx is still in progress. Therefore, temporarily set TFA_SPD to empty to avoid using any SPD (Secure Payload Dispatcher) services. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: simplify TI customizationsDenys Dmytriyenko2025-02-201-10/+16
| | | | | | | | | | | | | | | | | | | | | | | | | The original .bbappend started with just a few customizations behind a :k3 SoC override, but eventually grew in size. It got converted into a .inc file, which is behind the same SoC override and hence it gets included by .bbappend only for K3 platforms: https://git.yoctoproject.org/meta-ti/commit/?id=389f9a8b726868768a8bed6cbe0b2a1f18c05410 It doesn't make sense to use the same :k3 override inside this .inc file for every variable. Moreover, it makes it harder to change those variables downstream for any derivative platform or even for upstream testing. This change drops redundant :k3 SoC overrides, w/o changing existing behavior. It allows easier modifications of such customizations from downstream layers or a local.conf, e.g. SRC_URI_TRUSTED_FIRMWARE_A Note that SRC_URI is set exactly the same as in upstream base .inc file, but version-specific recipes in meta-arm tend to add extra patches directly to SRC_URI, which is undesirable here. Thus, reset SRC_URI back to its default. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* CI/CD Auto-Merger: cicd.master.202502181346cicd.master.202502181346LCPD Automation Script2025-02-183-3/+3
| | | | | | | | | | | | | | Updated the value(s) for: ti-linux-fw: TI_LINUX_FW_SRCREV u-boot-ti-staging_2025.01: SRCREV linux-ti-staging_6.12: SRCREV Changelogs: ti-linux-fw: https://git.ti.com/cgit/processor-firmware/ti-linux-firmware/log/?qt=range&q=7fbc75f80161a400a4b9c618b6191d72ab408def..e38a05e2ef5f6a6f2387742864042beba01972bb u-boot-ti-staging_2025.01: https://git.ti.com/cgit/ti-u-boot/ti-u-boot/log/?qt=range&q=4e9c90ad8b12cc5b4fdd1308bc3ac3e4fc869aab..9c89e8b0a82fabe55c6366aa65eb987f05bb4472 linux-ti-staging_6.12: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=8906665ace32eb0dc12810667ee8646bd660c374..6423e6bb6191982da1c09a21a46c68b494f5b1b5 Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
* Update recipes to support jailhouse for am62lxxParesh Bhagat2025-02-144-15/+16
| | | | | | | | | | | | | Add am62lxx as compatible machine for ti-extras recipes and jailhouse recipes. This is to to control the kernel and u-boot repos, branches. So the am62lxx jailhouse build can be done by adding TI_EXTRAS=tie-jailhouse in local.conf. Update SRCREV and branch in ti-extras recipes for LTS migration. Also update jailhouse recipe to build and package jailhouse, cell files, device tree for inmate etc on am62lx image. Signed-off-by: Paresh Bhagat <p-bhagat@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j722s: Change overlay in KERNEL_DEVICETREE_PREFIXAnurag Dutta2025-02-131-1/+1
| | | | | | | | | | | | | Currently, the overlay mentioned in KERNEL_DEVICETREE_PREFIX in case of j722s is "k3-j7200-evm-mcspi-loopback" which is incorrect. Change the overlay to "k3-am625-sk-mcspi-loopback.dtso" in order to carry out SPI loopback tests successfully. Fixes: 13b691a9bc2d ("conf: machine: j722s: Add overlay to KERNEL_DEVICETREE_PREFIX") Signed-off-by: Anurag Dutta <a-dutta@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-sgx-ddk-km: bump revision for kernel 6.12Randolph Sapp2025-02-102-5/+4
| | | | | | | | | | | Bump the source revision to allow this module to work on kernel 6.12. Originally this was going to be a separate branch, but considering the bsp selector logic, this makes just as much sense. Also enable the sgx driver in the ti_6.12 bsp selector. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: am62lxx-evm: Add logic to generate UBI filesystem imagesChirag Shilwant2025-02-071-0/+6
| | | | | | | | Add logic to generate UBI filesystem images which can be used to directly flash into the NAND’s file-system partition. Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* meta-ti-bsp: Add Support for AM62LChirag Shilwant2025-02-077-0/+58
| | | | | | | | | - Add machine configuration for am62lxx-evm - Add TFA, OPTEE, firmware & u-boot overrides Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Switch TFA to TI forkChirag Shilwant2025-02-071-3/+3
| | | | | | | | | | | | | | | | | | | | - While TFA patches for K3-based AM62L platform are under review upstream, temporarily switch to TI's GitHub fork for all K3 platforms to prevent disruptions and ensure timely bringup - Also update the LIC_FILES_CHKSUM since the license file changed between upstream TFA v2.12 [1] & the SRCREV in this commit [2][3] [1]: https://github.com/ARM-software/arm-trusted-firmware/blob/v2.12/docs/license.rst [2]: https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/license.rst [3]: https://github.com/TexasInstruments/arm-trusted-firmware/blob/ti-master/docs/license.rst License-Update: Updates w.r.t TFA Hob creation code Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* trusted-firmware-a: Update to v2.12 release tagChirag Shilwant2025-02-071-2/+2
| | | | | | | | | | | Bump up to latest release tag (i.e. v2.12) Commit: https://github.com/ARM-software/arm-trusted-firmware/commit/4ec2948fe3f65dba2f19e691e702f7de2949179c Tag: https://github.com/ARM-software/arm-trusted-firmware/releases/tag/v2.12 Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* recipes-security: optee: Update to v4.5.0+Chirag Shilwant2025-02-071-2/+2
| | | | | | | Bump up SRCREV of optee-os to ef1ebdc23034a804a72da2207f1a825ce96a1464 Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Revert "u-boot: Fix implicit declaration compile error"Ryan Eatmon2025-02-072-34/+0
| | | | | | | | | This reverts commit eeb68bcae31b60273331245cb849fa6635b74352. This patch was accepted to the ti-u-boot repo, so this patch is no longer needed. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: j722s: Add overlay to KERNEL_DEVICETREE_PREFIXAnurag Dutta2025-02-051-0/+1
| | | | | | | | | Add the overlay "k3-j7200-evm-mcspi-loopback.dtso" to the j722s configuration so that SPI loopback tests can be carried out successfully. Signed-off-by: Anurag Dutta <a-dutta@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* mesa-pvr: relocate 22.3.5 patchesRandolph Sapp2025-02-047-0/+0
| | | | | | | | Relocate the patches for 22.3.5 to the mesa-pvr-22.3.5 subdirectory so it's more clear what version of mesa they apply to. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-mainline: Update to version: v2025.01LCPD Automation Script2025-02-041-2/+2
| | | | | | | | Updated the value(s) for: u-boot-ti-mainline: PV,SRCREV Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-umlibs: filter binaries post installRandolph Sapp2025-02-042-10/+10
| | | | | | | | | No reason to do this pre install now that my python function can evaluate file paths. Also, this may have been causing issues with state when attempting to switch between opencl enabled/disabled builds. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-bsp: select the graphics 24.2 packagesRandolph Sapp2025-02-041-1/+6
| | | | | | | | | Since this is new logic is in place, switch the k6.6 and k6.12 configs to use these new libraries. Do not enable GFX on 6.12 just yet. Still need some kernel patches on the SGX side. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* mesa-pvr: version 23.2.1 -> 24.0.1Randolph Sapp2025-02-0410-113/+181
| | | | | | | | | The gfx library provided by rogue can support this never version of mesa out of the box. Pull it in now that we have ported the SGX side of things. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-img-rogue-*: version 24.1.6554834 -> 24.2.6643903Randolph Sapp2025-02-042-4/+4
| | | | | | | | Bump the package version for DDK 24.2, this includes a few fixups from IMG and support for a newer version of mesa. Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot: Fix implicit declaration compile errorRyan Eatmon2025-02-032-0/+34
| | | | | | | | | A recent patch to ti-u-boot 2025.01 introduces a compile error on master for am64xx-evm. A patch has been sent to the mailing list that fixes this, but it will take time before we will see that patch available to us on master. So we need to carry the patch here. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* CI/CD Auto-Merger: cicd.master.202502031558LCPD Automation Script2025-02-033-5/+5
| | | | | | | | | | | | | | Updated the value(s) for: ti-linux-fw: CNM_WAVE521_FW_VERSION,TI_LINUX_FW_SRCREV u-boot-ti-staging_2025.01: SRCREV linux-ti-staging_6.12: PV,SRCREV Changelogs: ti-linux-fw: https://git.ti.com/cgit/processor-firmware/ti-linux-firmware/log/?qt=range&q=1eaf07dc4ec5cdeb98078f17a9d4635e88f43f75..7fbc75f80161a400a4b9c618b6191d72ab408def u-boot-ti-staging_2025.01: https://git.ti.com/cgit/ti-u-boot/ti-u-boot/log/?qt=range&q=b841e559cd26ffcb20f22e8ee75debed9616c002..4e9c90ad8b12cc5b4fdd1308bc3ac3e4fc869aab linux-ti-staging_6.12: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=ade72d105eb7c9a2a4addfd0204eb4551b8efa7a..8906665ace32eb0dc12810667ee8646bd660c374 Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
* linux-ti-staging: Add config-fragments for v6.12 KernelBeleswar Padhi2025-01-238-8/+8
| | | | | | | | ti-linux-kernel tree has several prune config fragments for ARM/ARM64/RT configurations. Enable the prune config fragments here. Signed-off-by: Beleswar Padhi <b-padhi@ti.com> Acked-by: Andrew Davis <afd@ti.com>
* conf: machine: k3: Use Cortex-A53/A72 CPU tuneAndrew Davis2025-01-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | All current K3 devices use either A53 or A72. Use the compile tune configuration specific for these to allow the compiler to make better optimizations. Default tune here is weakly set to a lowest common denominator of aarch64, as before, which is a recommended behavior for a BSP layer. This allows for greater binary reuse (packages, sstate, etc.) across different platforms of the same architecture in multi-BSP environments. At the same time, since all the correct tunes are now configured for K3 devices, one can elevate compiler optimization levels either from local.conf or own Distro configuration on a per-SoC or per-device basis, like so: DEFAULTTUNE:k3 = "armv8a-crc" DEFAULTTUNE:j721e = "cortexa72-cortexa53" DEFAULTTUNE:beagleplay = "cortexa72-cortexa53" Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
* u-boot-ti-mainline: Add patch to use SWIG_AppendOutputRyan Eatmon2025-01-221-0/+2
| | | | | | | | | | | | | | Missed this recipe with the previous recipe. Swig has changed language specific AppendOutput functions. The helper macro SWIG_AppendOutput remains unchanged. Use that instead of SWIG_Python_AppendOutput, which would require an extra parameter since swig 4.3.0. This is a port from oe-core: https://git.openembedded.org/openembedded-core/commit/?id=4eae7888e91c7c864bf490dee38716267be6202e Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* ti-bsp: Disable GC320 support conditionally on BSP versionAndrew Davis2025-01-221-0/+15
| | | | | | | | | | | | Like we do with GPU support, GC320 support is conditional on the kernel we are building and so should be disabled here for kernels on which it is not functional yet. We can then remove these disabling lines as the driver is updated for each supported kernel, instead of blanket disabling in the distro layer as done currently. Signed-off-by: Andrew Davis <afd@ti.com>
* linux-ti-staging: Drop systest kernelAndrew Davis2025-01-2213-31/+0
| | | | | | | | | This was used when the kernel had a different configuration for the testing kernel. This has not been the case since v5.10 so drop the systest kernel package as it will be the same as the normal kernel package now. Signed-off-by: Andrew Davis <afd@ti.com>
* ti-bsp: Change to 6.12 as the defaultRyan Eatmon2025-01-224-7/+1
| | | | | | | | | | | | | | | | | We are moving to 6.12 to be our new LTS, so we are switching the default BSP to that. You can still access the 6.6 kernel if you need to by using the BSP system and setting TI_PREFERRED_BSP = "ti-6_6" in your local.conf. Current known issues: - Hardware graphics is disabled until we get a patch that updates the patches to work with the 6.12 kernel. Falling back to software rendering. - am62xxsip-evm and j742s2-evm are not supported in the 2025.01 u-boot yet. They will fail to build until the u-boot recipe is updated to point to a commit that fixes their support. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* u-boot-ti-staging: Move 2024.10 to 2025.01 for ltsprepRyan Eatmon2025-01-223-15/+13
| | | | | | | We are moving to 2025.01 for the next LTS, so rename the previous ltsprep recipe and update it. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: machine: beagleplay*: Update defaults to mainlineRyan Eatmon2025-01-222-10/+5
| | | | | | | | | The defaults for UBOOT_MACHINE and SPL_BINARY are now aligned with the mainline values and new ti-6_1 values for the previous defaults were created to capture those. Also updated the meta-beagle beagleplay since it inherits the beagleplay-ti settings. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-mainline: Update KERNEL_REPRODUCIBILITY_PATCHES for v6.12Ryan Eatmon2025-01-222-0/+33
| | | | | | | | The script that sends the automated patch does not currently handle updating the KERNEL_REPRODUCIBILITY_PATCHES variable with the changes in the patches. Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* linux-ti-mainline: Update to version: v6.12Ryan Eatmon2025-01-223-4/+8
| | | | | | | | | Updated the value(s) for: am65xx-evm: KERNEL_DEVICETREE j722s-evm: KERNEL_DEVICETREE linux-ti-mainline: PV,SRCREV Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
* u-boot-bb_org, linux-bb_org: move "bb_org" providers to meta-beagleDenys Dmytriyenko2024-12-165-193/+0
| | | | | | | Move "bb_org" kernel and U-boot providers that use corresponding official BeagleBoard.org trees into own meta-beagle layer. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
* conf/machine: move remaining Beagle platforms to meta-beagleDenys Dmytriyenko2024-12-164-134/+0
| | | | | | | Include beagle-bsp.inc to define "bb_org" BSP settings and select that as a default. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
* conf/machine: split beagleplay config between meta-ti-bsp and meta-beagleDenys Dmytriyenko2024-12-162-50/+2
| | | | | | | | | | | Extract "bb_org" BSP specific settings from beagleplay-ti in meta-ti-bsp and move them to own beagleplay machine config in meta-beagle. The differences between 2 configs are minimal, hence beagleplay in meta-beagle inherits beagleplay-ti from meta-ti-bsp as a base and only adjusts what's needed. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
* conf/machine: move "bb_org" BSP settings to meta-beagleDenys Dmytriyenko2024-12-161-20/+1
| | | | | | | Define "bb_org" default BSP settings in meta-beagle layer that all Beagle platforms will use. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
* conf/machine: rename beagleplay machine to beagleplay-tiDenys Dmytriyenko2024-12-162-0/+0
| | | | | | | | | | | | | BeaglePlay is officially supported by TI "ti-6_6" BSP and is part of the TI-SDK releases. Switching BSP to BeagleBoard.org "bb_org" settings for the same machine is possible within the same layer. But having different machine configs for the same machine name in multiple layers can be confusing and prone to errors. Hence rename the config to indicate BeaglePlay with official TI support in order to re-use the canonical name in a separate layer. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
* meta-ti-bsp: ti-rtos-bin: Move this with the other firmware recipesAndrew Davis2024-12-131-0/+0
| | | | | | | | | | | All other firmware recipes are in recipes-bsp. There is nothing much special about this set of firmware so move it to match. This firmware is the pre-compiled "echo test" example for various remote cores. The directory name is not very clear on that, so fix that up too. Signed-off-by: Andrew Davis <afd@ti.com>
* conf: machine: omap-a15.inc: include ipu1 firmware in the boot partitionAniket Limaye2024-12-131-1/+2
| | | | | | | | | | Early Boot of remote processors is supported at the SPL stage of the bootloader. Currently, SPL looks for the remoteproc firmwares in the boot partition. Therefore, add the rproc firmware to the boot partition of wic images. Signed-off-by: Aniket Limaye <a-limaye@ti.com>
* recipes-security: optee: Remove software PRNG for am62pxxAashvij Shenai2024-12-131-1/+1
| | | | | | | | | | | | | | | | | With the latest TIFS fix [1], AM62P is able to leverage the hardware-TRNG instead of having to fallback into the software-PRNG. Background: The default priv-id for A53 cores in SYSFW for AM62P was chosen to be 4 while the other K3 SOCs were configured at 1. Any firewall TISCI API call that used 1 would not be able to run on AM62P. The TIFS fix changes the AM62P value from 4 to 1. [1] - https://git.ti.com/cgit/processor-firmware/ti-linux-firmware/commit/?h=ti-linux-firmware&id=98de0a4290ec200cc224d4a5a6f42d2126230e2f Signed-off-by: Aashvij Shenai <a-shenai@ti.com> Acked-by: Chirag Shilwant <c-shilwant@ti.com>
* CI/CD Auto-Merger: cicd.master.202412130100cicd.master.202412130100LCPD Automation Script2024-12-133-3/+3
| | | | | | | | | | | | | | Updated the value(s) for: u-boot-ti-staging_2023.04: SRCREV linux-ti-staging-rt_6.1: SRCREV linux-ti-staging_6.1: SRCREV Changelogs: u-boot-ti-staging_2023.04: https://git.ti.com/cgit/ti-u-boot/ti-u-boot/log/?qt=range&q=2a13324ec63cc488f5f578886d0cf6ece348dfda..2bedcd265ca6de803c90505df5962cbd70cda611 linux-ti-staging-rt_6.1: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=b0f9de804a162329bc81857ad50947311228dfb2..9e8992fb839c642e3c20ee8ce69a30dbaae7f498 linux-ti-staging_6.1: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=c490f4c0fe51281818c45159c0fbed94f852978e..e4e8b16e66f592749984b2d287e0479e93ef35b3 Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
* CI/CD Auto-Merger: cicd.master.202412101025cicd.master.202412110100cicd.master.202412101025LCPD Automation Script2024-12-108-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | Updated the value(s) for: ti-linux-fw: PRUETH_FW_AM65X_SR2_VERSION,TI_LINUX_FW_SRCREV,TI_SYSFW_VERSION u-boot-ti-staging_2023.04: SRCREV u-boot-ti-staging_2024.04: SRCREV linux-ti-staging-rt_6.1: PV,SRCREV linux-ti-staging-rt_6.6: PV,SRCREV linux-ti-staging_6.1: PV,SRCREV linux-ti-staging_6.12: SRCREV linux-ti-staging_6.6: PV,SRCREV Changelogs: ti-linux-fw: https://git.ti.com/cgit/processor-firmware/ti-linux-firmware/log/?qt=range&q=7179a74d1ed38e581bcd35e7b05632955e962c30..1eaf07dc4ec5cdeb98078f17a9d4635e88f43f75 u-boot-ti-staging_2023.04: https://git.ti.com/cgit/ti-u-boot/ti-u-boot/log/?qt=range&q=0853d7725220d59130d8bcc59d01151cba64ffa0..2a13324ec63cc488f5f578886d0cf6ece348dfda u-boot-ti-staging_2024.04: https://git.ti.com/cgit/ti-u-boot/ti-u-boot/log/?qt=range&q=2a7de06d57399e04738573622cbdaa3532e7ab4d..29d0c23d67ee7b88e46fe1753cd020e2b04c2ef6 linux-ti-staging-rt_6.1: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=451df8c0a2a3bcf0656b2f6fdc49d6fb4d05f186..b0f9de804a162329bc81857ad50947311228dfb2 linux-ti-staging-rt_6.6: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=d7b6ee144955d71f1c3d29b7dc08619961f12d64..c79d7ef3a56ff61dd83d5527520b419a4f0e32e2 linux-ti-staging_6.1: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=92ce8d7d2ab679e10c1dda309a0fb2ceae78b908..c490f4c0fe51281818c45159c0fbed94f852978e linux-ti-staging_6.12: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=f8f8c0b547f67d2d4d653cc59753f85275ff54f2..ade72d105eb7c9a2a4addfd0204eb4551b8efa7a linux-ti-staging_6.6: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=118cf0c8b392bed94437f1519de10b63705dbacd..a7758da17c2807e5285d6546b6797aae1d34a7d6 Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
* u-boot: Add patch to use SWIG_AppendOutputRyan Eatmon2024-12-074-0/+65
| | | | | | | | | | | | Swig has changed language specific AppendOutput functions. The helper macro SWIG_AppendOutput remains unchanged. Use that instead of SWIG_Python_AppendOutput, which would require an extra parameter since swig 4.3.0. This is a port from oe-core: https://git.openembedded.org/openembedded-core/commit/?id=4eae7888e91c7c864bf490dee38716267be6202e Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* conf: layer.conf: Drop scarthgap from LAYERSERIES_COMPATChirag Shilwant2024-12-061-1/+1
| | | | | | | | | | | | | | After scarthgap release, oe-core switched to use UNPACKDIR instead of WORKDIR [1]. Post this change, meta-ti updated all references of WORKDIR to UNPACKDIR in master branch. Since, UNPACKDIR changes aren't backported to oe-core:scarthgap, we need to drop it from LAYERSERIES_COMPAT in meta-ti. [1]: https://git.openembedded.org/openembedded-core/commit/?id=e022d62ba917790af2121da57646271ef17c03fa Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> Acked-by: Denys Dmytriyenko <denys@konsulko.com>
* conf: machine: am62xx-lp-evm: Add PWM overlaysJudith Mendez2024-12-061-0/+2
| | | | | | | Add the PWM overlays: k3-am62x-sk-dmtimer-pwm and k3-am62x-sk-pwm for AM62 LP SK. Signed-off-by: Judith Mendez <jm@ti.com>
* ti-ipc: mark as incompatible with non-Linux buildsDenys Dmytriyenko2024-11-211-1/+1
| | | | | | | | | This package provides Linux-side components for TI IPC and depends on virtual/kernel Linux kernel for the build, so it is not compatible with non-Linux builds, such as k3r5 baremetal multiconfig. Hence adjust COMPATIBLE_HOST accordingly. Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
* conf: machine: am62pxx: Pick overlays for V3Link camerasRishikesh Donadkar2024-11-211-0/+1
| | | | | | | | | | | | | The V3Link camera fusion board [1] can be used to connect upto 4 OV5640 sensors to SK-AM62A. Overlays for interfacing OV5640 sensor with V3Link are built as part of the TI linux kernel. Pick these in the BSP filesystem. [1]: https://www.arducam.com/product/arducam-v3link-camera-kit-for-ti-development-boards/ Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com> Acked-by: Chirag Shilwant <c-shilwant@ti.com>
* SECURITY: Add fileRyan Eatmon2024-11-151-0/+20
| | | | | | | | Add a SECURITY file with hints for security researchers and other parties who might report potential security vulnerabilities. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Acked-by: Denys Dmytriyenko <denys@konsulko.com>
* CI/CD Auto-Merger: cicd.master.202411120100cicd.master.202411120100LCPD Automation Script2024-11-123-3/+3
| | | | | | | | | | | | | | Updated the value(s) for: u-boot-ti-staging_2024.04: SRCREV linux-ti-staging-rt_6.6: SRCREV linux-ti-staging_6.6: SRCREV Changelogs: u-boot-ti-staging_2024.04: https://git.ti.com/cgit/ti-u-boot/ti-u-boot/log/?qt=range&q=1d8a15d0fb56ae479dd3c11e3b17d7434b079acd..2a7de06d57399e04738573622cbdaa3532e7ab4d linux-ti-staging-rt_6.6: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=4143633c95dc50cb5e2c695629d8b6302ef8de81..d7b6ee144955d71f1c3d29b7dc08619961f12d64 linux-ti-staging_6.6: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?qt=range&q=399452cd6d8ff30967ddc4baa444afd32cbbedeb..118cf0c8b392bed94437f1519de10b63705dbacd Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-07-24 03:23:56 +0000