From e55b1ccaa720fc2b2699213ea81c2088a576233d Mon Sep 17 00:00:00 2001
From: Patrick Vacek <patrickvacek@gmail.com>
Date: Thu, 8 Nov 2018 12:33:38 +0100
Subject: Replace more references to ATS Garage with HERE OTA Connect.

Signed-off-by: Patrick Vacek <patrickvacek@gmail.com>
---
 README.adoc | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'README.adoc')

diff --git a/README.adoc b/README.adoc
index 177e788..2ded322 100644
--- a/README.adoc
+++ b/README.adoc
@@ -6,7 +6,7 @@ This layer enables over-the-air updates (OTA) with https://github.com/ostreedev/
 
 https://github.com/ostreedev/ostree[OSTree] is a tool for atomic full file system upgrades with rollback capability. OSTree has several advantages over traditional dual-bank systems, but the most important one is that it minimizes network bandwidth and data storage footprint by sharing files with the same contents across file system deployments.
 
-https://github.com/advancedtelematic/aktualizr[Aktualizr] (and https://github.com/advancedtelematic/rvi_sota_client[RVI SOTA client]) add authentication and provisioning capabilities to OTA and are integrated with OSTree. You can connect with the open-source https://github.com/advancedtelematic/rvi_sota_server[RVI SOTA server] or sign up for a free account at https://app.atsgarage.com[ATS Garage] to get started.
+https://github.com/advancedtelematic/aktualizr[Aktualizr] (and https://github.com/advancedtelematic/rvi_sota_client[RVI SOTA client]) add authentication and provisioning capabilities to OTA and are integrated with OSTree. You can connect with these open-source applications or sign up for a free account at https://connect.ota.here.com/[HERE OTA Connect] to get started.
 
 [discrete]
 == Table of Contents
@@ -17,7 +17,7 @@ toc::[]
 
 === Quickstart
 
-If you don't already have a Yocto project that you want to add OTA to, you can use the https://docs.atsgarage.com/quickstarts/raspberry-pi.html[ATS Garage Quickstart] project to rapidly get up and running on a Raspberry Pi. It takes a standard https://www.yoctoproject.org/tools-resources/projects/poky[poky] distribution, and adds OTA and OSTree capabilities.
+If you don't already have a Yocto project that you want to add OTA to, you can use the https://docs.atsgarage.com/quickstarts/raspberry-pi.html[HERE OTA Connect Quickstart] project to rapidly get up and running on a Raspberry Pi. It takes a standard https://www.yoctoproject.org/tools-resources/projects/poky[poky] distribution, and adds OTA and OSTree capabilities.
 
 === Adding meta-updater capabilities to your build
 
@@ -145,7 +145,7 @@ First, you can set `SOTA_CLIENT_PROV` to control which provisioning recipe is us
 Second, you can write recipes to install additional config files with customized options. A few recipes already exist to address common needs and provide an example:
 
 * link:recipes-sota/config/aktualizr-example-interface.bb[aktualizr-example-interface.bb] will configure aktualizr to connect to an example interface for a legacy flasher. This is intended to be used in conjunction with the `aktualizr-examples` package. See https://github.com/advancedtelematic/aktualizr/blob/master/docs/legacysecondary.adoc[legacysecondary.adoc] in the aktualizr repo for more information.
-* link:recipes-sota/config/aktualizr-disable-send-ip.bb[aktualizr-disable-send-ip.bb] disables the reporting of networking information to the server. This is enabled by default and supported by https://app.atsgarage.com[ATS Garage]. However, if you are using a different server that does not support this feature, you may want to disable it in aktualizr.
+* link:recipes-sota/config/aktualizr-disable-send-ip.bb[aktualizr-disable-send-ip.bb] disables the reporting of networking information to the server. This is enabled by default and supported by https://connect.ota.here.com/[HERE OTA Connect]. However, if you are using a different server that does not support this feature, you may want to disable it in aktualizr.
 * link:recipes-sota/config/aktualizr-log-debug.bb[aktualizr-log-debug.bb] sets the log level of aktualizr to 0 (trace). The default is 2 (info). This recipe is intended for development and debugging purposes.
 
 To use these recipes, you will need to add them to your image with a line such as `IMAGE_INSTALL_append = " aktualizr-log-debug "` in your `local.conf`.
-- 
cgit v1.2.3-54-g00ecf

