| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| ... | |
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
v4l: xilinx: dprx: Replace irq_of_parse_and_map with platform_get_irq_byname
v4l: xilinx: dprx: Fix incorrect reconfiguration of registers
v4l: xilinx: dprx: Correct the XDPRX_DEVICE_SERVICE_IRQ_CP_IRQ_MASK macro value
soc: xilinx: Fix event notification issue for SW event node
drm: xlnx: hdcp: Remove unused variable srm_version
xen/pci: Add xen_reset_device_state function
net: phy: xilinx-gmii2rgmii: Adopt clock support
dt-bindings: net: xilinx_gmii2rgmii: Add clock support
|
| | |
| |
| |
| |
| |
| |
| |
| | |
arm64: dts: zynqmp: make hw-ecc as the default ecc mode
xilinx: Do not call private env_get_location() when !ENV_IS_NOWHERE
mtd: spi-nor: Disable chip erase for n25q512ax3 flash
configs: zynqmp_kria: Deactivate CONFIG_SPI_FLASH_BAR
arm64: zynqmp: Disable Tri-state for SDIO
|
| | |
| |
| |
| | |
dfeprach: Correct order of RACH mapping steps
|
| | |
| |
| |
| |
| |
| |
| |
| | |
mtd: spi-nor: Disable chip erase for S28HS02GT flash
mtd: spi-nor: Set the ECC configuration to 1-bit error correction
mtd: spi-nor: Added Fixup for S28HS02GT Infineon OSPI flash
xilinx: Enable support for Infineon Octal flash
arm64: zynqmp: Add bootcmd_usb4 variable
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
ttcps: Add support for peripheral tests in SDT flow
usbps: Fix failures reported by CV test suite "Chapter 9 Tests [USB 2 devices] CV tests"
usbps: Update driver version
mipicsiss: data: Update yaml file to support new MIPI RX PHY
mipicsiss: src: Add support of mipi rx phy subcore
sw_services:xilloader: Updated RSA KAT to use 2048-bit key
sw_services: xilsecure: Fix RSA quiet mode issues and update KAT
scugic: Add doxygen and editorial fixes
|
| | |
| |
| |
| |
| |
| |
| | |
Update xen jtag boot instruction using TFTP or XSDB tools.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| | |
Update xen jtag boot instruction using TFTP or XSDB tools.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| | |
Update xen boot instructions for storage boot medium.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| | |
symlinks don't work on the /boot FAT partition, so change to copy
Signed-off-by: Jonathan Stroud <jonathan.stroud@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| | |
fix: 10 bits HEVC and AVC streams
chore: update to revision d20240216
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
fix: 10 bits HEVC and AVC streams Acked-for-series: Varunkumar Allagadapa <varunkumar.allagadapa@amd.com>
chore: add missing errorCode
fix: context
fix: add missing nDeviceIndex increment
chore: update to revision 20240216
Revert "chore fix compilation issue"
|
| | |
| |
| |
| | |
fix: Force sample pack mode setting
|
| | |
| |
| |
| |
| | |
dp14txss: zcu_pt_dp14_hdcp: Fix DP14 HDCP multi combination issues
wdttb: Add doxygen fixes
|
| | |
| |
| |
| | |
Modified al5d log message to use VDU instead of VCU
|
| | |
| |
| |
| | |
chore: update to revision d20240216
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
trafgen: Add SDT check to use interrupt wrapper API
wdttb: Add SDT check to use interrupt wrapper API
uartpsv: Add SDT check to use interrupt wrapper API
uartps: Add SDT check to use interrupt wrapper API
gpio: Add SDT check to use interrupt wrapper API
clk_wiz: Add SDT check to use interrupt wrapper API
axipmon: Add SDT check to use interrupt wrapper API
bsp: standalone: Remove 64bit variable prints support for 32bit platforms
cpu_cortexr5: Export flag to identify R5 FSBL BSP
xloader:versal_net Remove releasing DDR from update psm.elf
emacps: Update driver for emacps+pcspma design in SDT flow
emacps: Add additional SDT check to XCLOCKING macro
lwip : Enable dhcp and acd debug flags in lwip stack
lwip : Add ACD Feature in Classic flow
lwip : Add ACD Feature in sdt flow.
xilpm: versal_common: server: Refactor of AddRequirement()
xilpm: versal_net: server: add check for UART instances
sw_services: xilsecure: Add support for non-word aligned data
i3c: Correct maximum data length value
i3c: Add Tx FIFO threshold configuration parameter
i3c: Add SCL configuration support
ttcps: Add examples support in SDT flow.
lwip220: Fix support for emaclite in lwip adapter in SDT flow
sw_services: xilpm: Refactor PGGS/GGS ioctl read/write operation checks
lib: sw_apps: memory_tests: Add required_mem for Zynq platform
scripts: pyesw: library_utils: Fix remove library for windows platform
scripts: pyesw: library_utils: Fix race condition in the remove library
|
| | |
| |
| |
| | |
arm/gic-v3-its: fix build failure with CONFIG_HAS_ITS=y
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Github lopper (https://github.com/devicetree-org/lopper) has now been branched
out to v0.2024.x to support 2024.1 release. Update the recipe to use lopper from
this branch.
The SRCREV update contains below commits:
assists: gen_domain_dts: Remove BRAM memory nodes from linux device tree
assists: linker/domain: Add support for linear flash memories in linker script
lopper: assists: baremetal_validate_comp_xlnx: Update memory test checks for zynq platform
lopper: assists: baremetal_xparameters_xlnx: Fix whitespace after the marco name warning
assists: baremetal_xparameters_xlnx: Export defines needed by MB V BSP
lops: lop-microblaze-riscv: Add support for library fallback mechanism
lopper: assists: baremetal_gentestapp_xlnx: Fix the condition for selftest API declartion
Signed-off-by: Onkar Harsh <onkar.harsh@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Due to recent u-boot changes wrt boot_cmd, booti command is taking input
as booti 0x00200000 - 0x00001000, and ramdisk address offset is missing in
u-boot. So, added JTAG boot mode support in boot script to support jtag boot
target, When user wants to debug/boot vck5000 wrt to jtag boot mode.
Signed-off-by: John Vicky Vykuntapu <johnvicky.vykuntapu@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
It is not currently possible to create symlinks in the /boot partition
due to the use of the vfat filesystem and this causes an issue when
trying to update the dtb using rpm packages which contain a symlink.
Work around the issue by copying the dtb file to the symlink location.
Signed-off-by: John Toomey <john.toomey@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
(cherry picked from commit 6ddde9a20775549f1434cba6006f84db1a223cb4)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
staging: xilinx_hdcp: Fix gcc warning
crypto: xilinx: RSA support for the Versal platform
firmware: xilinx: RSA interface api support for Versal
mtd: spi-nor: gigadevice: Add lock/unlock support for GD25B512
spi: spi-cadence-quadspi: Remove dependency on SRAM Fill Register during indirect non-dma read
mtd: spi-nor: gigadevice: Set hardware capabilities inline with the opcodes defined in flash info
net: macb: Correct WOL CAPS value
net: macb: Use queue disable instead of tieoff in Versal suspend
|
| | |
| |
| |
| |
| |
| | |
fix: Force sample pack mode packed xv for > 8bits Acked-for-series: Varunkumar Allagadapa <varunkumar.allagadapa@amd.com>
fix: add missing nDeviceIndex increment
chore: update to revision d20240216
|
| | |
| |
| |
| | |
chore: update to revision d20240216
|
| | |
| |
| |
| | |
chore: update to revision d20240216
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
gpiops: Fix compilation warning of XGpioPs_SelfTest
sw_services:versalnet:xilpuf: Updated PUF client example
sw_services:xilloader:Added support for Spansion Die Config
xilpm: versal_net: server: Request UART_0 and UART_1 from PMC subsystem
v_sditxss: Add SDI substems to peripheral test
dfeofdm: Fix SDT flow number of instances
dfemix: Fix SDT flow number of instances
dfeequ: Fix SDT flow number of instances
dfeccf: Fix SDT flow number of instances
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
watchdog: xilinx_wwdt: Add check for timeout limit and set maximum value if exceeded
remoteproc: zynqmp: Change tcm address translation method
remoteproc: zynqmp: fix TCM carveouts in lockstep mode
mtd: spi-nor: winbond: Add lock/unlock support for W25Q256JWFIM
arm64: versal-net: Align spi-max-frequency for se7
arm64: versal: Remove flexnoc node
arm64: zynqmp: dts: Add required properties for rs485 support for KD240
arm64: versal: Add clocks and power domains for LPD SWDT
dt-bindings: power: Add PM for LPD SWDT
arm64: versal: Add LPD SWDT node in versal.dtsi
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
arm64: zynqmp: dts: Add required properties for rs485 support for KD240
spi: cadence_qspi: Fix OSPI boot issue
arm64: versal: Add clocks and power domains for LPD SWDT
dt-bindings: power: Add PM for LPD SWDT
arm64: versal: Add LPD SWDT node in versal.dtsi
mtd: spi-nor: Address the Macronix flash probe failure
mtd: spi-nor: Store GPIO info during flash probe
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Added: 0029-Fixed-buildpath-QA-warning.patch
Resolved buildpath QA warning
Signed-off-by: Parth Gajjar <parth.gajjar@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| | |
xen_4.18.bb SRCREV should be using to upstream commit id and not
xilinx xen repo commit id.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Update SRCREV for xlnx_rel_v2023.2_update branch to pull in the
latest changes for image selector app
Signed-off-by: Sharath Kumar Dasari <sharath.kumar.dasari@xilinx.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
(cherry picked from commit 03d5b1500ee95320bfacc785ce832c04b3435d3d)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
dp14: Removed application examples from yaml file
dp14txss: Removed xdptxss_selftest_example application
dp14rxss: Removed xdprxss_selftest_example application
mipicsiss: example: Update VEK280 app.
mipicsiss: example: Updated VCK190 app
mipicsiss: example: Update ZCU102 application
mipi: data: Fix yaml to support Unified flow
v_sdirxss: Add support for SDI import example option
xilpm: Fix MISRA violation 10.5i 10.3 in xpm_periph.c
xilpm: remove XPmRepair_Laguna_vp1902 when it is not build for XCVP1902
xilpm: Fix MISRA C violation by replace PIN_FUNC macro
xilpm: Fix MISRA violation 12.1, 10.1, 10.4, 10.3 in xpm_api.c
xilpm: Fix MISRA violation 8.13 in xpm_notifier
sw_services: xilsecure: Optimization of AES initialization code
sw_services: xilloader: Fixed doxygen warnings
lwip : Fix format specifier warning
sw_services: xilplmi: Fix improper PLM timestamp issue after In-place PLM update
drivers: iomodule: Initialize HandlerTable of the IOModule instance in a function to support In-place PLM update
|
| | |
| |
| |
| | |
dmaproxy: Use DMA_TO_DEV in dma_map_page API for destination buffer
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
mtd: spi-nor: Enable DDR mode functionality with Macronix flash
mtd: spi-nor: Enable DDR mode functionality with Gigadevice flash
mtd: spi-nor: Enable DDR mode functionality with ISSI flash
spi: cadence_qspi: Modified the rx_dll_tuning function to support generic execution
arm64: versal-net: Align spi-max-frequency for se7
arm64: versal: Remove flexnoc node
arm64: zynqmp: Add missing description for vm-p-m1369
|
| | |
| |
| |
| |
| |
| |
| | |
lib: bsp: standalone: Add symbol VERSAL for versal platform in SDT flow
v_hdmitxss: Fix interrupt ID argument in interrupt setup function
v_hdmirxss: Fix interrupt ID argument in interrupt setup
gpiops: Add multi-core interrupt support
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
arm/smmu: adjust pdev->domain PCI assignment
arm/pci: select HAS_PCI_MSI
xen/dt: create dom0 and domU DT nodes for vPCI with correct addresses
xen/pci: vpci_get_msi_base should check on domain_use_host_layout
arm/smmu: remove is_hardware_domain check in assign
xen/pci: use has_vpci_bridge in vpci and pci
xen/pci: introduce has_vpci_bridge
xen/arm: create dom0less virtio-pci DT node
arm/iommu: allow arm_iommu_unmap_page for non-direct-mapped domains
xen/arm: fix vgic and vpl011 to use domain_use_host_layout
docs: add device tree overlay documentation
add a domU script to fetch overlays and applying them to linux
xl/overlay: add remove operation to xenstore
get_overlay: remove domU overlay
tools/helpers: Add get_overlay
tools/xl: Share overlay with domU
tools/libs/light: Modify dtbo to domU linux dtbo format
tools: Add domain_id and expert mode for overlay operations
xen/overlay: Enable device tree overlay assignment to running domains
rangeset: Move struct range and struct rangeset to headerfile
tools/libs/light: Increase nr_spi to 160
tools/libs/light: Always enable IOMMU
xen/arm: Always enable IOMMU
xen/arm/gic: Enable interrupt assignment to running VM
xen/pci: add linux,pci-domain property
pci: permit dom0 access to pci devices when pci-scan=yes
xen/arm: initialize Versal CPM PCIe host controller
xen/arm: initial support for Versal PCIe host controller
xen/arm: pci: add function to initialize host bridge
xen/pci: do not let vpci dom0 read/write to all pci devs
xen/pci: scan only buses in the range supported by the bridge
xen/vpci: Clear all vpci status of device
xen/pci: initialize BARs
xen/pci: helpers to get/reserve BAR ranges
arm/pci: keep track of PCI ranges in rangeset
rangeset: add rangeset_find_aligned_range()
xen/dt: pass flags to callback in dt_for_each_range()
arm/pci: permit access to BARs for dom0less domUs
xen/arm: enable vPCI for dom0less domUs
xen/arm: pci device passthrough for dom0less guests
xen/pci: Create pci_assign_device
xen/pci: assign pci devices to hardware domain
xen/pci: update DT for hwdom when it uses vpci
xen/pci: disable pci_device_{add,remove} when hwdom uses vpci on arm
xen/pci: helper function for hwdom using vpci
xen/arm: add emulated ITS node to gicv3 for domUs using vpci
xen/pci: add discovered PCI device at boot
xen/pci: modify pci_add_device to handle device add by Xen
arm/pci: Add pci-scan boot argument
arm/vgic: provide late_init function
xen/vpci: initialize msix->next
xen/arm: Enable the existing MSI-X and MSI handlers support for ARM
xen/vpci: msix: change return value of vpci_msix_{read,write}
xen/vpci: msix: move x86 specific code to x86 file
xen/arm: map ITS doorbell registers for domUs
xen/arm: Modify VITS code to support MSI/MSIX interrupt for DOMU guests.
arm/libxl: Emulated ITS device tree node in libxl
xen/arm: Map ITS doorbell register to IOMMU page tables
xen/arm: enable dom0 to use PCI devices with pci-passthrough=no
xen/arm: Fix mapping for PCI bridge mmio region
xen/arm: smmuv3: Add PCI devices support for SMMUv3
xen/arm: smmuv2: Add PCI devices support for SMMUv2
iommu/arm: iommu_add_dt_pci_sideband_ids phantom handling
iommu/arm: Introduce iommu_add_dt_pci_sideband_ids API
iommu/arm: Add iommu_dt_xlate()
tools/arm: enable vPCI for domUs
xen/arm: enable vPCI for domUs
xen/arm: enable vPCI for dom0
xen/vpci: move xen_domctl_createdomain vPCI flag to common
xen/arm: pci: introduce PCI_PASSTHROUGH Kconfig option
xen/vpci: handler for min_gnt, max_lat
xen/vpci: handler interrupt line/pin
xen/vpci: handlers for subsystem vendor ID, subsystem ID
xen/vpci: handler for cardbus cis ptr
xen/vpci: handlers for class/revision, cacheline size, latency timer, header type, bist
xen/vpci: handler for VID/DID
arm/vpci: make prefetchable mem 64 bit
arm/vpci: honor access size when returning an error
xen/arm: account IO handlers for emulated PCI MSI-X
xen/arm: translate virtual PCI bus topology for guests
vpci: add initial support for virtual PCI bus topology
vpci/header: emulate PCI_COMMAND register for guests
vpci/header: program p2m with guest BAR view
vpci/header: handle p2m range sets per BAR
rangeset: add rangeset_purge() function
rangeset: add RANGESETF_no_print flag
vpci/header: implement guest BAR register handlers
vpci/header: rework exit path in init_header()
vpci: add hooks for PCI device assign/de-assign
vpci: restrict unhandled read/write operations for guests
vpci: use per-domain PCI lock to protect vpci structure
pci: msi: pass pdev to pci_enable_msi() function
pci: introduce per-domain PCI rwlock
xen/vpci: header: filter PCI capabilities
xen/vpci: header: status register handler
docs: Add documentation for virtio-console
libxl: dm: Set virtio-pci related parameters for QEMU
libxl: Add "backend_type" property for the Virtio devices
xen-init-dom0: create a device model xenstore entry
libxl/arm: Reuse generic PCI-IOMMU bindings for virtio-pci devices
libxl/arm: Add basic virtio-pci support
xen/public: arch-arm: reserve resources for virtio-pci
xen/arm: switch partial-emulation default to true
xen/arm: arm32: Add emulation of Debug Data Transfer Registers
xen/arm: arm64: Add emulation of Debug Data Transfer Registers
xen/arm: Introduce CONFIG_PARTIAL_EMULATION and "partial-emulation" cmd option
xen: arm32: Fix some compilation issues
xen/arm: Use host layout for hwdom if LLC coloring enabled
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Using u-boot.elf for Microblaze, u-boot fails to build with below
errors.
ERROR: u-boot-xlnx-1_v2024.01-xilinx-v2024.1+gitAUTOINC+db3e1e025f-r0 do_package_qa: QA Issue: Endiannes did not match (0, expected 1) in /boot/u-boot-kcu105-microblazeel-v2024.01-xilinx-v2024.1+gitAUTOINC+db3e1e025f-r0.elf [arch]
ERROR: u-boot-xlnx-1_v2024.01-xilinx-v2024.1+gitAUTOINC+db3e1e025f-r0 do_package_qa: Fatal QA errors were found, failing task.
So fix qa issue by adding arch to INSANE_SKIP for u-boot package.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For microblaze u-boot not booting on qemu or hw after moving to
u-boot 2024.1 rebase branch.
Reason explained below:
u-boot will provide output files as u-boot.elf, u-boot,
u-boot.bin, u-boot-nodtb.bin etc..
For Microblaze and Zynq we are using u-boot output file
For aarch64 family we are using u-boot.elf
u-boot: which has no relocation inside, then we apply relocation
(rela section) over binary. and then copying as u-boot.elf and using it.
u-boot.elf: It will relocation inside it and without debug symbols.
After recent relocation changes in u-boot
we should use u-boot.elf only for all platforms.
Signed-off-by: Varalaxmi Bingi <varalaxmi.bingi@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
arm64: zynqmp: Add resets and assigned-clock-rates properties for KD240
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
(cherry picked from commit c73652b9f1b46ded3b672c022de0a79e306fdc25)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
Add a minimal xclbinutil recipe based on the existing XRT recipe
Signed-off-by: John Toomey <john.toomey@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
(cherry picked from commit 49e14580b9942aeb45b6d046b9379e51c090f72d)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
lib: sw_apps: Fix the race condition when picking a linker from an external path
scripts: pyesw: retarget_app: Remove the dependency of xiltimer in embedded applications
sw_apps: imgsel: zynqmp: Added validation check for SOM usecase
rfdc: CMakeLists dependencies
dfeprach: CMakeLists dependencies
dfeofdm: CMakeLists dependencies
dfemix: CMakeLists dependencies
dfeequ: CMakeLists dependencies
dfeccf: CMakeLists dependencies
trngpsv: Fix doxygen warnings
xilpm: versal_common: server: fix MISRA-C rule 4.7
sw_apps: Added support for Microblaze RISC-V
sw_services:xilsecure:Code redundancy is removed
pciepsu: Add Egress transfer support
Add Authentication Optimization support for MetaHeader
zynq_fsbl: fix prints for 32 bit variables
zynqmp_fsbl: fix prints for 32 bit variables
xilplmi: fix prints for 32 bit variables
dp14txss:dp14rxss: Removed the option of self_test example design
BSP: cortexr5: Move the _TCM_*_REGION definitions to a C source file
drivers:trngpsv:updated yaml file
xilloader: macronix 2G flash part support
xilpm: Secure lockdown house clean time out
Revert "xilpm: versal_net: client: add idle call back support"
csudma: Add doxygen fixes
|
| | |
| |
| |
| |
| |
| | |
docs(versal-net): update SMC convention
docs(versal): update SMC convention
docs(zynqmp): update SMC convention
|
| | |
| |
| |
| | |
fal: src: Replace single letter function arguments.
|
| | |
| |
| |
| |
| | |
arm/smmu: adjust pdev->domain PCI assignment
arm/pci: select HAS_PCI_MSI
|
| | |
| |
| |
| | |
dfx_mgr: Removing unused graph code
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
When using AUTOREV with BB_NO_NETWORK = '1', the system would fail with a
circular dependency on a parse error. Adding the skip code, and moving
the default value to 'INVALID' will ensure that the user is notified
with an appropriate error, and no parse issues occur.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
1. Update JTAG boot instructions in README files.
2. Add devtool boot-jtag method.
3. Replace xsct with xsdb commands as new Vitis IDE doesn't support
xsct commands.
4. Fix tftpboot instructions.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| | |
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
This script uses devtool and creates a boot-jtag.tcl script in
${DEPLOY_DIR_IMAGE} directory. This script is executed by xsdb tool to
boot yocto generated images on HW via jtag boot mode.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
media: i2c: Update streaming flag based on return value
arm64: zynqmp: Remove snps,enable_guctl1_ipd_quirk property
dwc3: core: For ZU+ enable GUCTL1 bit 9 for correcting Inter Packet Delay(IPD)
Revert "dwc3: core: Enable GUCTL1 chicken bit 9 for correcting Inter Packet Delay(IPD)"
Revert "dt-bindings: usb: dwc3: Add snps,enable_guctl1_ipd_quirk"
crypto: xilinx: ECDSA support for the Versal platform
firmware: xilinx: ECDSA support for Versal
soc: xilinx: rename cpu_number1 to dummy_cpu_number
drivers: firmware: Add support for crypto drivers on versal
arm64: zynqmp: Add missing description for vm-p-m1369
|
| | |\ |
|
