| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
| |
examples: linux: zynqmp: Add Versal-NET IPI Values
lib: generic: xlnx: Use CMAKE_C_FLAGS to determine if SDT symbol is present
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
CMAKE_MACHINE and CMAKE_SYSTEM_PROCESSOR values are different for Versal Net
than that of Versal. Update the same using the SOC_VARIANT as the SOC_FAMILY is
same for both.
In addition, update the SOC specific flags (defined in-house to segragate execution
of some part of the boot code and the drivers) for versal and versal-net.
Signed-off-by: Onkar Harsh <onkar.harsh@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
| |
The commit 738df8cc6819 (yaml: support ruamel versions > 0.17.x) of github
lopper repo introduced a new dependency for lopper over "packaging" module. Add
the same in Yocto workflow.
Signed-off-by: Onkar Harsh <onkar.harsh@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
| |
Add the recipies for clocking wizard example.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
| |
Below are the updates
lopper: assists: xlnx_overlay_dt: Fix wrong gic_node referencing
setup.py: Add "packaging" module under YAML related requirements of Lopper
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
| |
Sync integration to Yocto Project master as of commit:
25868ee2cc3fdcbf4bff1ff4f66465e8aeef744d
Note, we remain on 8.1.x version to match the AMD version.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
| |
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
| |
Backport the tune files from poky master as of commit:
dd4c941e9fe9e0f1b73a934d9ecd0d165ee85474
This adds support for cortex-r5 and cortexr-r52 hard float ABI, as well
as cortex-a78.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
v_hdmirxss1: Fix compilation issue with non HDCP design
v_hdmirxss: Fix compilation issue with non HDCP design
v_hdmitxss: Fix TxOnly application for microblaze platform
v_hdmitxss: Fix PassThrough application for vcu118 platform
v_hdmirxss: Fix PassThrough application for vcu118 platform
v_hdmirxss1: Update PassThrough example application for VCU118 platform
v_hdmitxss1: Update PassThrough example application for VCU118 platform
v_hdmitxss1: Fix yaml for vck190 passthrough example application
v_hdmirxss: Fix RxOnly application for microblaze platform
v_hdmirxss: Fix example application build error with zc706 platform
v_hdmitxss: Add SDT flow support to I2S audio example application
v_hdmirxss1: Update PassThrough example application for VCU118 platform
v_hdmirxss: Add SDT support in PT app for vck190 platform
v_hdmitxss: Add SDT support in PT app for vck190 platform
v_hdmirxss: Correct application file name in yaml file
v_hdmitxss: Correct application file name in yaml file
audio: Add application support for SDT flow
v_sditxss: Add support for SDT flow
xilpm: versal_common: server: Add CLK_IGNORE_UNUSED flag for GATE clocks
sdi: Add support for SDT flow
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
tty: serial: uartps: Add rs485 support to uartps driver
tty: serial: uartps: Relocate cdns_uart_tx_empty to facilitate rs485
dt-bindings: Add reference to rs485.yaml
serial: core: Provide port lock wrappers
v4l: xilinx: dprx: Fix lane count allowed range of values
drm: xlnx: dptx: Fix unannotated fall-through between switch labels in xlnx_dp_check_clock_recovery api()
drm: xlnx: dptx: Fix xlnx_dp_hdcp_exit() return value
drm: xlnx: scaler: Initialize variable nr_rds
arm64: versal: Configure reset gpio as active low
arm64: versal: Add support for Versal Embedded+ VE2302-revA
arm64: configs: Enable DisplayPort driver
mmc: core: Do not force a retune before RPMB switch
v4l: xilinx: vipp: Fix searching in the correct list while enabling streaming
arm64: zynqmp: Add silabs, skip-recall to all si570 clk nodes
soc: xilinx: Add cb event for subsystem restart
firmware: xilinx: Export function to use in other module
Revert "OF: overlay: Perform RCU callback barrier before releasing overlay memory resources"
misc: xilinx-ai-engine: add dma_buf_get for each aie mem dmabuf created
drivers: misc: xilinx-ai-engine: Remove use of uninitialized variables
phy: xilinx-xhdmiphy: Fix GT pll-selection allowed range of values
misc: xilinx-ai-engine: support for partitioned AIE address segments
arm64: xilinx: Define bootscript address
arm64: versal: Move reset-gpios property from controller node to flash node
dt-bindings: xilinx: Fix all downstream bindings with latest schema
dt-bindings: nvmem: Update xlnx,versal-sec-cfg description
arm64: zynqmp: Remove unused zynqmp-clk.dtsi
|
|
|
|
|
|
|
| |
README.md: Update parse-sdt command help usage
Kconfig.dtgsettings: Rename dfx-static to dfx in kconfig
sdt_flow.py: Remove dfx-static and dfx-partial references
sdt_ipinfo.yaml: Update compatibility strings for ethernet
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
lib: sw_apps: OpenAMP Demos: sdt: Streamline app-create step
intc: Initialize IVAR register based on mtvec in case of Microblaze RISC-V
bsp: riscv: Initialize mtvec with _trap_handler at start of boot code
bsp: riscv: Add constructor to initailize mtvec with _trap_handler
lib: bsp: arm: Dont invoke XTime_StartTTCTimer() if xiltimer library is enabled
xxvethernet: Add support for compiling driver examples in yocto flow
sw_apps: img_rcvry: Clean up
sw_apps: img_rcvry: update the imgrcvry template app to support vitisng flow.
clk_wiz: Add support for compiling driver examples in Yocto flow
i3cpsx: Update the compatible
i3cpsx: Update the base address
i3cpsx: Add prints under debug
i3cpsx: Add support for compiling driver examples in Yocto flow
|
|
|
|
|
|
|
|
| |
rfdc: Support Baremetal SDT Yocto Flow
scripts: pyesw: Add support for incremental build feature
emacps: driver: HwTail check post increment
sw_services:xilnvm: Program RoSwap only when it is non-zero
gpio: Add support for compiling driver examples in Yocto flow
|
|
|
|
|
|
|
| |
versal-net: remove hardcoded ADMA addresses
zynqmp: set correct revidr value one the Cortex-A
board-versal-xcve2802: Add 2Gib OSPI flash
versal: Add vhk158 es1 board
|
|
|
|
| |
hw/arm/smmuv3: add support for the AFFD bit in context descriptors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Warp_init: App completion statement is added
sw_apps :zynqmp_fsbl: Add init_array and fini_array in linker script for A53 FSBL
spi: Add support for compiling driver examples in Yocto flow
gpiops: Add support for compiling driver examples in Yocto flow
gpiops: Update driver version
uartlite: Add support for compiling driver examples in Yocto flow
uartlite: Add SDT check to support interrupt example in SDT flow
qspips: Add support for compiling driver examples in Yocto flow
qspips: Increment driver version
uartns550: Add support for compiling driver examples in Yocto flow
trafgen: Add support for compiling driver examples in Yocto flow
trafgen: Increment driver version
iicps: Add support for compiling driver examples in Yocto flow
iicps: Incremented driver version to 3.19
freertos10_xilinx: Fix the minor version in mld file.
emacps: Fix warnings for IAR builds
uartpsv: Add support for compiling driver examples in Yocto flow
Revert "xilloader: Do delayed handoffs and subsystem activation after boot device is released"
bram: Add support for compiling driver examples in Yocto flow
bram: Increment driver version
sw_services:xilplmi:Code spell warning fix
xilpm: versal: server: Add rigel flow support for xcvp1902
dp12txss: Update driver to support HDCP1X
dp12txss: update yaml file to enable multi-interrupts and VTC entries
hdcp1x: Update header file with new macros
dual_splitter: Update Xparameter canonical definations as per new sdt flow.
dp12rxss: Update config structure to align with new sdt flow
dp12rxss: Add support for multi-interrupts.
dp12rxss: examples: Add support for system device-tree flow.
dp12rxss: Add support for system device-tree flow.
dp12txss: Add support for System-device tree flow
v_hdmirxss:hdcp_key_utility: Update driver to support new system device-tree flow.
v_hdmirxss:Add Multiple interrupt support for new system device-tree flow.
v_hdmirxss: xhdmi_example: PassThrough: Update HDCP initialization to support system device-tree flow.
v_hdmirxss:Update HDCP Controlling Logic to support system device-tree flow.
v_hdmirxss1:hdcp_key_utility: Update driver to support new system device-tree flow.
v_hdmirxss1:Add Multiple interrupt support for new system device-tree flow.
v_hdmirxss1:Update HDCP Controlling Logic to support system device-tree flow.
v_hdmitxss:xhdmi_example:PassThrough:Update HDCP initialization to support system device-tree flow.
v_hdmitxss:hdcp_key_utility: Update driver to support new system device-tree flow.
v_hdmitxss:Update HDCP Controlling Logic to support system device-tree flow.
v_hdmitxss:Add Multiple interrupt support for new system device-tree flow.
v_hdmitxss1: hdcp_key_utility:Update driver to support new system device-tree flow.
v_hdmitxss1: xhdmi_example:Update application to support system device-tree flow.
v_hdmitxss1: Update Yaml file to support multi-interrupts in system device-tree flow.
v-hdmitxss1: Update HDCP Controlling Logic to support system device-tree flow.
hdcp22_rx: Driver updates to support system device-tree flow.
hdcp22_rx: Add support for system device-tree flow
hdcp22_cipher:Driver updates to support system device-tree flow.
hdcp22_cipher:Add support for system device-tree flow
hdcp22_tx: Driver updates to support system device-tree flow.
hdcp22_tx: Add support for system device-tree flow
sw_services:xilplmi:Updated XPlmi_SetPmcIroFreq function
lib: bsp: Fix cache invalidation range API for A9 platforms
lib: bsp: Fix cache invalidation range API for Cortex-R platforms
v_hdmirxss: Fixed yaml to support import examples
uartps: Add support for compiling driver examples in Yocto flow
xilpm: versal_common: server: Fix IpiMask and AckType in force pwr dwn
lib: bsp: standalone: Update the CMakeLists.txt to pull microblaze_interrupt_handler.c file for microblaze non freertos use case explicitly
spips: Add support for compiling driver examples in Yocto flow
FreeRTOS Avoid mem mapping in MPU for region mapped
canps: Add support for compiling examples in Yocto flow
lib: bsp: xparameters_ps: Update GIC base address
lib: sw_apps: memory_test: Initialize the status variable to success
tft: Add support for compiling driver examples in Yocto flow
tft: Increment driver version
sw_apps: memory_tests: Update code to exclude memory regions from all designs
sw_apps: memory_tests: Fix logic to find out instruction memories in HW design.
bsp: standalone: Update lower DDR mapping calculation for MMUtbl2.
xilloader: Do delayed handoffs and subsystem activation after boot device is released
canps: Update example to fix compilation error in Rigel flow
versal_net: psmfw: Integration into vitisng/rigel flow
sw_services: xilpm: versal_net: Integration into vitisng/rigel flow
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pick up latest commits for build
examples: linux: zynqmp: Add Versal-NET IPI Values
lib: generic: xlnx: Use CMAKE_C_FLAGS to determine if SDT symbol is present
examples: generic: zynqmp_r5: Add symbols for System Device Flow flow
lib: generic: xlnx: Enable CMake handling for System Device Tree Flow
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Changelogs:
lops: lop-microblaze-riscv: Fix handling of use-muldiv and use-fpu
lopper: assists: Remove domain specific code from the assist
xlnx_overlay_dt.py: Rename dfx-static to dfx
asists/subsystem: make processing more robust
isospec: ensure that memory and cpus are always lists
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
| |
1. Add SDT DFx pl overlay instructions in README.md file.
2. Rename dfx-static config option to dfx as this option is changed in
lopper and gen-machineconf. Also remove dfx-partial as it was place
holder for early prototyping which is no longer required.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
| |
Mingw compilation does not support libcap-ng which is requird by the
virtfs configuration. Change this to match the previous 7.1
implementation where virtfs is only enabled on the target version of qemu.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
| |
srec_spi_bootloader in Yocto flow
Add recipe for srec_spi_bootloader application.
Signed-off-by: RAM M ABINANTHAN <abinanthanramm.ramm@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
| |
srec-bootloader in Yocto flow
Add recipe for srec_bootloader application.
Signed-off-by: RAM M ABINANTHAN <abinanthanramm.ramm@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
| |
hw-description.tcl:kconfig_syshw.py: Rename Serial DTB to U-boot/Linux
sdt_flow.py: Rename dfx-static to dfx
plnx_machine.py: add xen support for plnx in sdt flow.
|
|
|
|
| |
target/arm: add the revidr property to the CPU
|
|
|
|
|
|
| |
This reverts commit 121edde2e704900a7b4e24b260167614705297aa.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
| |
This reverts commit 6f7a824d505115a01dd49386aa47b079598fc07c.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
| |
libdfx: Add document for dfx_cfg_init_file() API
Src: Add new API dfx_cfg_init_file() to provide more flexibility to the user
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
lopper: assists: baremetal*: Add provision to pass float numbers from SDT as is
yaml: support ruamel versions > 0.17.x
lopper: assists: gen_domain_dts: Fix syntax issue in the code
lopper: assists: baremetal_xparams: Done generate interruptIDs for PS peripherals
isospec: refactor for speed and tracking
tree: fix property iteration for json
isospec. WIP2. cleanedup prints
WIP: v2 unassigned devices and memory
WIP: unreferenced devices can be addded, lots of address warnings
assist:baremetalconfig: Avoid the error when there is no serial mapped to the processor
xlnx_overlay_dt.py: Update script to support partial use cases
openamp: xlnx: Enable Linux generated Device Tree to work for OpenAMP use cases
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
| |
Add recipe for ddr_self_refresh application.
Signed-off-by: Harini T <harini.t@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add recipe for zynqmp dram test
This recipe does the below
--> Generates the required meta-data files for the zynqmp dram test.
--> Compiles the zynqmp dram test application.
Signed-off-by: Paul Alvin <alvin.paulp@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add recipe for zynq dram test
This recipe does the below
--> Generates the required meta-data files for the zynq dram test.
--> Compiles the zynq dram test application.
Signed-off-by: Paul Alvin <alvin.paulp@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
lwip-echo-server baremetal application fails to build with below
errors:
ERROR: mc:cortexr5-0-zynqmp-baremetal:lwip-2024.1+gitAUTOINC+2a07bc9c76-r0 do_configure: ExecutionError('/scratch/sandeep/yocto/2024.1/yp-dev/build-sdt/tmp-cortexr5-0-zynqmp-baremetal/work/cortexr5-vfpv3d16-xilinx-eabi/lwip/2024.1+gitAUTOINC+2a07bc9c76-r0/temp/run.do_configure.2679569', 1, None, None)
ERROR: Logfile of failure stored in: /scratch/sandeep/yocto/2024.1/yp-dev/build-sdt/tmp-cortexr5-0-zynqmp-baremetal/work/cortexr5-vfpv3d16-xilinx-eabi/lwip/2024.1+gitAUTOINC+2a07bc9c76-r0/temp/log.do_configure.2679569
Log data follows:
| DEBUG: Executing python function extend_recipe_sysroot
| NOTE: Direct dependencies are ['mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/meta-xilinx/meta-xilinx-standalone-experimental/recipes-libraries/libxil_2024.1.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/../meta-xilinx/meta-xilinx-core/recipes-bsp/device-tree/device-tree.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-core/newlib/libgloss_4.2.0.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-core/newlib/newlib_4.2.0.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/cmake/cmake-native_3.24.2.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/gcc/gcc-cross_12.2.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/gcc/gcc-runtime_12.2.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/gcc/libgcc_12.2.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/quilt/quilt-native_0.67.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:virtual:native:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/../meta-virtualization/recipes-kernel/dtc/python3-dtc_1.6.1.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:virtual:native:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/../meta-virtualization/recipes-kernel/lopper/lopper_git.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:virtual:native:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/ninja/ninja_1.11.1.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:virtual:native:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:virtual:native:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/pkgconfig/pkgconfig_git.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:virtual:native:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:virtual:native:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/python/python3-pyyaml_6.0.bb:do_populate_sysroot', 'mc:cortexr5-0-zynqmp-baremetal:virtual:native:/scratch/sandeep/yocto/2024.1/yp-dev/sources/poky/meta/recipes-devtools/python/python3_3.10.6.bb:do_populate_sysroot']
| NOTE: Installed into sysroot: []
| NOTE: Skipping as already exists in sysroot: ['libxil', 'device-tree', 'libgloss', 'newlib', 'cmake-native', 'gcc-cross-arm', 'gcc-runtime', 'libgcc', 'quilt-native', 'python3-dtc-native', 'lopper-native', 'ninja-native', 'patch-native', 'pkgconfig-native', 'pseudo-native', 'python3-pyyaml-native', 'python3-native', 'libtool-native', 'attr-native', 'bzip2-native', 'libtirpc-native', 'sqlite3-native', 'readline-native', 'zlib-native', 'libffi-native', 'libnsl2-native', 'xz-native', 'ncurses-native', 'util-linux-libuuid-native', 'gdbm-native', 'openssl-native', 'canps', 'qspipsu', 'xilstandalone', 'dppsu', 'gpiops', 'iicps', 'intc', 'pciepsu', 'rtcpsu', 'video-common', 'zdma', 'coresightps-dcc', 'csudma', 'resetps', 'sysmonpsu', 'dpdma', 'common', 'sdps', 'emacps', 'scugic', 'uartps', 'ddrcpsu', 'clockps', 'avbuf', 'usbpsu', 'ttcps', 'axipmon', 'ipipsu', 'wdtps', 're2c-native', 'zstd-native', 'curl-native', 'flex-native', 'binutils-cross-arm', 'gmp-native', 'libmpc-native', 'texinfo-dummy-native', 'mpfr-native', 'gnu-config-native', 'python3-installer-native', 'python3-wheel-native', 'python3-picobuild-native', 'python3-humanfriendly-native', 'python3-anytree-native', 'python3-setuptools-native', 'python3-six-native', 'python3-ruamel-yaml-native', 'python3-cython-native', 'libyaml-native', 'dtc-native', 'python3-setuptools-scm-native', 'swig-native', 'gettext-minimal-native', 'perl-native', 'm4-native', 'python3-flit-core-native', 'python3-pyparsing-native', 'python3-tomli-native', 'python3-packaging-native', 'python3-typing-extensions-native', 'python3-pip-native', 'libpcre-native', 'make-native', 'unzip-native']
| DEBUG: Python function extend_recipe_sysroot finished
| DEBUG: Executing shell function do_configure
| lwip213 Driver doesn't have yaml file
| install: target '/scratch/sandeep/yocto/2024.1/yp-dev/build-sdt/tmp-cortexr5-0-zynqmp-baremetal/work/cortexr5-vfpv3d16-xilinx-eabi/lwip/2024.1+gitAUTOINC+2a07bc9c76-r0/git//ThirdParty/sw_services/lwip213/src//' is not a directory: No such file or directory
| WARNING: /scratch/sandeep/yocto/2024.1/yp-dev/build-sdt/tmp-cortexr5-0-zynqmp-baremetal/work/cortexr5-vfpv3d16-xilinx-eabi/lwip/2024.1+gitAUTOINC+2a07bc9c76-r0/temp/run.do_configure.2679569:146 exit 1 from 'do_configure'
| WARNING: Backtrace (BB generated script):
| #1: do_configure, /scratch/sandeep/yocto/2024.1/yp-dev/build-sdt/tmp-cortexr5-0-zynqmp-baremetal/work/cortexr5-vfpv3d16-xilinx-eabi/lwip/2024.1+gitAUTOINC+2a07bc9c76-r0/temp/run.do_configure.2679569, line 146
| #2: main, /scratch/sandeep/yocto/2024.1/yp-dev/build-sdt/tmp-cortexr5-0-zynqmp-baremetal/work/cortexr5-vfpv3d16-xilinx-eabi/lwip/2024.1+gitAUTOINC+2a07bc9c76-r0/temp/run.do_configure.2679569, line 216
ERROR: Task (mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/meta-xilinx/meta-xilinx-standalone-experimental/recipes-libraries/lwip_2024.1.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1246 tasks of which 1244 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
mc:cortexr5-0-zynqmp-baremetal:/scratch/sandeep/yocto/2024.1/yp-dev/sources/meta-xilinx/meta-xilinx-standalone-experimental/recipes-libraries/lwip_2024.1.bb:do_configure
Summary: There were 26 WARNING messages.
Summary: There was 1 ERROR message, returning a non-zero exit code.
This is due to lwip version has upgraded from 2.1.3 to 2.2.0 in esw
repo, so update lwip version.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
| |
Signed-off-by: John Toomey <john.toomey@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
(cherry picked from commit fe1fee9a45076aab2e39e38b5705d1ad0aa06de5)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
| |
Last SRCREV update added support for kv260 rev2 which we are now tagging,
releasing for canonical, hence incrementing the version to 1.1
Signed-off-by: Sharath Kumar Dasari <sharathk@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
(cherry picked from commit 57b22cc33a24b32c4f3cef364378c5216d2fda87)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
| |
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
(cherry picked from commit 79335c2a8a9a6cfef521a3bddb24865def036050)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
| |
Updated commit ID to latest HEAD
|
|
|
|
| |
Updated commit ID to latest HEAD
|
|
|
|
|
|
|
|
|
|
|
|
| |
versal-vek280: Add es1 board varient
versal: Add vmk180 board
versal-net: Add REVA version for vn-p-b2197-00-x-prc
Update AMD Copyright
versal: Add support for xqvp1702
versal-ps-pl-remoteport: Add NPI IRQs
versal: Add support for xave1752
versal-xcvp1802: Add CPM5
zynqmp: Add KV260 board dts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fix(xilinx): deprecate SiP service count query
feat(versal): extend platform address space sizes
fix(xilinx): add console_flush() before shutdown
fix(xilinx): fix sending sgi to linux
feat(xilinx): add new state to identify cpu power down
feat(xilinx): request cpu power down from reset
feat(xilinx): power down all cores on receiving cpu pwrdwn req
feat(xilinx): add handler for power down req sgi irq
feat(xilinx): add wrapper to handle cpu power down req
fix(versal-net): use arm common GIC handlers
fix(xilinx): rename macros to align with ARM
|
|
|
|
|
|
|
| |
driver: src: lite: Missing end quotation mark
driver/src: Revert removed TilesInUse code in PartitionInit.
driver:src:lite: Initialize NumRows to Default Value
driver: src: Clock ungate only the requested tiles
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
lib: sw_apps: Wrap IPI Symbols in #ifndefss
xilnvm: Fix doxygen warnings
v_hdmitxss1: Add yaml changes to support import examples
v_hdmirxss1: Add yaml changes to support import examples
v_hdmitxss: Add yaml changes to support import examples
v_hdmirxss: Add yaml changes to support import examples
v_sditxss: Add support for SDT flow
axis_switch: Add support for compiling driver examples in Yocto flow
axis_switch:Increment driver version
llfifo: Add support for compiling driver examples in Yocto flow
llfifo: Increment driver version
dfeprach: Correct memset destination address
sw_services:xilplmi:Addition in Logstring and begin command logic enhancement
emacps: Add support for compiling driver examples in yocto flow
emacps: Increment driver version
|
|
|
|
| |
driver: src: close memtile fd & unmapped memory associated with memtile
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
rfclk: Correct linux gpio ID
v_hdmitx1: Declare XV_HdmiTx1_LookupVic function in header file
resetps: Add support for compiling examples in Yocto flow
bsp: standalone: Fixed source code-format issue
bsp: standalone: Fix Doxygen warnings
wdttb: Add support for compiling examples in Yocto flow
sw_services: xilnvm: Validate the decrypt only puf helper data
qspipsu: example: Update examples to set QSPI clock based on baud rate divisor
qspipsu: Add support to set QSPI clock based on baud rate divisor
VideoHLS Drivers: Import examples option is added to all examples
fs-boot.c: fixing compilation issues in sdt flow
|
|
|
|
|
|
|
|
|
|
|
|
| |
net: macb: Fix missing wakeup attribute on zu+ and versal
media: dt-bindings: ov8856: decouple lanes and link frequency from driver
dt-bindings: serial: rs485: Add rs485-rts-active-high
media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
ASoC: dt-bindings: Simplify port schema
dt-bindings: display: panel: one file of all simple LVDS panels with dual ports
ASoC: dt-bindings: Simplify referencing dai-params.yaml
dt-bindings: Drop kernel copy of common reserved-memory bindings
dt-bindings: iio: honeywell,mprls0025pa: drop ref from pressure properties
|
|
|
|
| |
driver: src: Mark TilesInUse bitmap in PartitionInit
|
|
|
|
|
|
|
|
|
|
| |
Update xen and xen-tools version to 4.18.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Added 4.17 support 2023.x compatibility
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
| |
Add Xen 4.18 patches and limit patches to target recipes only.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. In upstream 4.18 recipes add XEN_URI variable and set xen upstream
url as conditional assignment. Also unset PV and DEFAULT_PREFERENCE.
2. Add xen_4.18 and xen-tools_4.18 bbapends files use AMD Xilinx Xen
4.18.0.
3. Add xen-xilinx_4.18.inc file and include AMD Xilinx Xen 4.18.0 repo
details and also set PV to make it clear this a forked version.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
|
| |
Copy xen 4.18 recipes from meta-virtualization master to this layer
to support xen 4.18 as meta-virtualization langdale release doesn't
support 4.18 version.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
|
|
|
|
|
|
| |
Rename xen recipes and inc file to 4.17 version so that it will
be easy to make changes for 4.17 and new version.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|