summaryrefslogtreecommitdiffstats
path: root/conf/machine
Commit message (Collapse)AuthorAgeFilesLines
* kc705-microblazeel.conf: Support for KC705 kitManjukumar Matha2016-05-131-0/+24
| | | | | | | Support for KC705 board kit Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: uboot format is binManjukumar Matha2016-05-131-0/+1
| | | | | | | u-boot output is bin suffix format for KC705 microblaze Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* feature-microblaze-*.inc: Updated to v9.6Manjukumar Matha2016-05-132-8/+13
| | | | | | | Update to the latest v9.6 tune feature Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* kc705-trd-microblazeel: Remove kc705-trd filesManjukumar Matha2016-05-131-29/+0
| | | | | | | Remove old kc705-trd reference Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Update default linux-yocto version to 4.4Nathan Rossi2016-05-051-1/+1
| | | | Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zcu102-zynqmp.conf: Add support for ZCU102 boardManjukumar Matha2016-05-041-0/+23
| | | | | | | Add support for ZCU102 Zynq UltraScale+ MPSoC evaluation board Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zybo-linux-bd-zynq7: Use FORCE_PS7INIT to override platform-initNathan Rossi2016-05-031-0/+1
| | | | | | | Override the platform init provided in U-Boot sources for the 'zybo' board. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zybo-linux-bd-zynq7: Force default kernel and u-bootNathan Rossi2016-05-031-0/+3
| | | | | | | | | | The zybo-linux-bd-zynq7 machine relies on drivers from the linux-xlnx kernel, default the machine to use the linux-xlnx kernel. The machine also relies on functionality and patching of the mainline u-boot (as opposed to u-boot-xlnx). Default to the mainline u-boot. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zybo-linux-bd-zynq7: Enable required kernel driversJason Wu2016-05-031-0/+7
| | | | | | | Enable DRM, SND, KP-GPIO and V4L2 kconfigs Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* conf/machine: Add zybo-linux-bd-zynq7 machine supportJason Wu2016-05-031-0/+31
| | | | | | | | | * base on Zybo linux_bd reference design * Add device tree with required nodes * hdf is fetch from Digilent github Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Default to v4.4 kernelManjukumar Matha2016-05-031-1/+1
| | | | | | | Default preferred version for Xilinx kernel is v4.4 Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* conf/machine/*-zynq7.conf: Use 'spl/boot.bin' for Zynq SPL imagesNathan Rossi2016-03-316-6/+6
| | | | | | | | The boot.bin built by u-boot is located in spl/boot.bin, this is now the default location of the build product and is consistent between mainline and the Xilinx vendor tree. This was upstream as of v2016.01 of u-boot. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Handle 'u-boot-dtb.img' for ZynqNathan Rossi2016-03-251-1/+6
| | | | | | | | | Handle the case where mainline u-boot does not default to having the target device tree embedded into the u-boot ELF via OF_EMBED, which is default for the u-boot-xlnx source tree. Select the UBOOT_BINARY value based on the currently configured virtual/bootloader provider. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-*.inc: Remove default append for 'device-tree'Nathan Rossi2016-03-066-5/+4
| | | | | | | | | | * The device-tree recipe is not required for all machines or all boards, remove the default append to allow each machine to add the dependency when needed * Add the 'device-tree' as a machine RDEPEND for all machines that use the device-tree recipe to obtain the machines device tree output Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zybo-zynq7: Switch over to in kernel device treeNathan Rossi2016-03-063-88/+3
| | | | | | | | | | * Switch to the device tree that is available in the kernel source tree * Remove the in layer device tree and configuration for the in layer device tree * Setup IMAGE_BOOT_FILES with the correct target device tree from the kernel source/recipe Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zc706-zynq7: Switch over to in kernel device treeNathan Rossi2016-03-063-154/+2
| | | | | | | | * Switch to the device tree that is available in the kernel source tree * Remove the in layer device tree and configuration for the in layer device tree Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zedboard-zynq7: Switch over to in kernel device treeNathan Rossi2016-03-063-90/+3
| | | | | | | | | | | * Switch to the device tree that is available in the kernel source tree * Remove the in layer device tree and configuration for the in layer device tree * Setup IMAGE_BOOT_FILES with the correct target device tree from the kernel source/recipe * Setup U-Boot uEnv.txt to use the correct target device tree Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zc702-zynq7: Switch over to in kernel device treeNathan Rossi2016-03-063-161/+3
| | | | | | | | | | | * Switch to the device tree that is available in the kernel source tree * Remove the in layer device tree and configuration for the in layer device tree * Setup IMAGE_BOOT_FILES with the correct target device tree from the kernel source/recipe * Setup U-Boot uEnv.txt to use the correct target device tree Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* picozed-zynq7: Rework device tree to use kernel source includeNathan Rossi2016-03-063-86/+2
| | | | | | | | | * Rework the picozed-zynq7.dts device tree to use the kernel source include 'zynq-7000.dtsi' * Store the new device tree in the device-tree recipe directory * Remove existing device tree from conf/machine/boards Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* microzed-zynq7: Rework device tree to use kernel source includeNathan Rossi2016-03-063-86/+2
| | | | | | | | | * Rework the microzed-zynq7.dts device tree to use the kernel source include 'zynq-7000.dtsi' * Store the new device tree in the device-tree recipe directory * Remove existing device tree from conf/machine/boards Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* kc705-trd-microblazeel: Move device tree to device-tree recipeNathan Rossi2016-03-062-527/+1
| | | | | | | | * Move the device tree into the source files directory for the device-tree recipe * Use non-immediate set for MACHINE_DEVICETREE Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemuzynq: Remove older device-treesNathan Rossi2016-03-062-75/+0
| | | | Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemuzynq: Rework device tree to use kernel source includeNathan Rossi2016-03-061-4/+1
| | | | | | | | * Rework the qemuzynq.dts device tree to use the kernel source include 'zynq-7000.dtsi' * Store the new device tree in the device-tree recipe directory Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* device-tree.bb: Move zynq7-base.dtsi into recipe sourceNathan Rossi2016-03-062-509/+0
| | | | | | | | | * Move zynq7-base.dtsi out of conf/machine/boards and into the files/ directory of the device-tree recipe * Also move the config from machine-xilinx-default.inc that includes the dtsi for zynq targets Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* tune-zynq: Change ABI to hard-float with thumbManjukumar Matha2016-02-291-1/+1
| | | | | | | | | Zynq-7000 devices support hard-float with thumb-2 instruction set. Xilinx SDK toolchain with hard-float enabled will be available from v2016.1 release. Hence the ABI needs to change to match the toolchain. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* u-boot-extra.inc: Retire use of this configuration frameworkNathan Rossi2016-01-062-49/+0
| | | | | | | | | This is only used by MicroBlaze targets for U-Boot, and due to U-Boot moving to Device Model this is no longer sufficent to configure U-Boot. Instead support for MicroBlaze must be added by patches to U-Boot with partial DM and xparameters support. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Update default linux-xlnx to 4.0%Nathan Rossi2016-01-061-1/+1
| | | | Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemuzynq: Update clock work around for QEMU 2.5+Nathan Rossi2015-12-281-4/+4
| | | | | | | The GEM phy in QEMU 2.5+ reports a link speed of 100Mbps, which requires a slower clock. Change the fixed clock to provide a 25MHz reference. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zynq7-base.dtsi: Update for newer kernelsNathan Rossi2015-12-211-7/+22
| | | | | | | Update compatiblity with newer kernels. Adding new properties and nodes where available. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* Fix up UBOOT_BINARY for Zynq and setup SPL to load correctlyNathan Rossi2015-11-261-1/+0
| | | | | | | | | | u-boot-xlnx 'xilinx-v2015.2' (fixed in newer versions) incorrectly sets the SPL image to load as 'u-boot-dtb.img' despite the images being built having embedded device trees (OF_EMBED=y). This change fixes this up so that there are no hacks to the u-boot recipes and no overrides to use the incorrectly named U-Boot image file. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* conf/machine/*-zynq7.conf: Update the configuration of SPLNathan Rossi2015-11-266-11/+6
| | | | | | | | | | Machines now only need to set SPL_BINARY to 'boot.bin' to enable the generation of boot.bin and/or u-boot-spl binaries. If a machine sets SPL_BINARY and does not provide any way to attain the platform init code bitbake will fail with a dependency error. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zc70*-zynq7: Update U-Boot configNathan Rossi2015-11-262-4/+4
| | | | | | | | Newer versions of U-Boot provide seperate configs for the ZC702 and ZC706, setup the machines to use the correct config corresponding to the machine. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* ep108-zynqmp: U-Boot config name changedNathan Rossi2015-11-261-1/+1
| | | | | | | The name of the U-Boot configuration for the EP108 board/QEMU changed to 'xilinx_zynqmp_ep_config'. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* Fix up use of '_append +='Nathan Rossi2015-11-262-3/+3
| | | | | | | | | | | | The use of '_append' and '+=' together is considered bad practice within recipes. It is preferred to explicitly add the preceeding spaces where they are applicable instead of using the '+=' to achieve the same result. Change all the uses of '_append +=' to match the recommended pattern, adding in spaces where explicitly required. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-*.inc: Not all MicroBlaze machines need device-treeNathan Rossi2015-09-242-2/+3
| | | | | | | * Not all MicroBlaze machines need the 'device-tree' dependency, move this to being a board common setup Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemumicroblaze: Remove device-tree usageNathan Rossi2015-09-242-407/+0
| | | | | | | | | * Remove the qemumicroblaze device-tree as instead of using a in layer device tree the device tree that is provided as part of QEMU is used * Update device-tree recipe removing the need for the runqemu compatiblity for qemumicroblaze Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* conf/machine/qemu*: Setup init-ifupdown for QEMU machinesNathan Rossi2015-09-242-0/+7
| | | | | | | | | * Using FILEOVERRIDES setup the init-ifupdown recipe to use the /etc/network/interfaces for the 'qemuarm' machine, this allows for the runqemu networking setup to specify the IP address via kernel parameters. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Update default linux-yocto to 4.1%Nathan Rossi2015-09-211-1/+1
| | | | | | Update the default linux-yocto version to 4.1%. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* conf/machine/boards/*: Update flash compatible stringsNathan Rossi2015-09-166-6/+6
| | | | | | | | * Update the compatible strings in the device tree to have the dummy 'm25p80' string, the valid component string as well as adding the generic 'jedec,spi-nor' string for future use. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Unpin u-boot-xlnx versionNathan Rossi2015-09-151-1/+0
| | | | | | | | * There is only one version of u-boot-xlnx, so there is no need to pin the version. Additionally if there are two versions the newest will be used by default Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* u-boot-elf.inc: Available in oe-core, drop from layerNathan Rossi2015-09-151-0/+2
| | | | | | | | * Remove use of u-boot-elf.inc * Move UBOOT_ELF setting into machine-xilinx-default.inc * Remove u-boot.elf.inc Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* ep108-zynqmp: Use mainline u-boot by defaultNathan Rossi2015-09-092-3/+1
| | | | | | | * Upstream u-boot supports ZynqMP * Default all 'zynqmp' machines to use upstream u-boot Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Add variable for default u-bootNathan Rossi2015-09-091-1/+2
| | | | | | | * Allow for overriding of the default u-boot provider for various archs and machines Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* linux-zynqmp-mainline: Drop custom ZynqMP kernel recipeNathan Rossi2015-09-092-2/+2
| | | | | | | | * The features of this kernel are available upstream and in the linux-yocto 4.1 kernel * Default ZynqMP machines to use linux-yocto as the default kernel Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Set default version of linux-xlnx to 3.19Nathan Rossi2015-07-231-1/+1
| | | | | | | | * Set the default to the newer linux-xlnx 3.19 kernel (xilinx-v2015.2) * This only applies to machines that default the virtual/kernel provider to linux-xlnx Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* ep108-zynqmp: Add KERNEL_DEVICETREENathan Rossi2015-07-231-0/+2
| | | | | | | * Set the KERNEL_DEVICETREE for compatiblity with new kernels that have the ep108 device tree in kernel sources Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* ep108-zynqmp: Remove pinning of custom QEMU versionNathan Rossi2015-07-231-4/+0
| | | | | | * Upstream QEMU (2.4+) has support for the ep108 machine model Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemumicroblaze-s3adsp1800.conf: Add machine based on QEMU s3adsp1800Nathan Rossi2015-05-051-0/+18
| | | | | | | * Add machine based on the QEMU Machine Model 'petalogix-s3adsp1800' * This machine is a Big Endian MicroBlaze machine Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
* tune-microblaze.inc: Remove SOC_FAMILY add MACHINEOVERRIDES additionNathan Rossi2015-05-051-2/+3
| | | | | | | | * Remove the use of SOC_FAMILY in the tune-microblaze.inc include * Add "microblaze" to MACHINEOVERRIDES when the "microblaze" feature is part of TUNE_FEATURES Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
* tune-microblaze-features.inc: Force either 'el' or 'eb' for TUNE_ARCHNathan Rossi2015-05-051-1/+2
| | | | | | | | | * Change the TUNE_ARCH variable so that for MicroBlaze the endianess in part of the TUNE_ARCH value * This causes the triplet for MicroBlaze targets to have either microblazeel or microblazeeb and prevents any confusion about defaults Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-05 11:27:35 +0000