summaryrefslogtreecommitdiffstats
path: root/conf
Commit message (Collapse)AuthorAgeFilesLines
* zcu102-zynqmp.conf: Add serial consoles checkManjukumar Matha2017-11-071-0/+1
| | | | | | | | There are instances when serial console check if required to disable consoles when it is not defined by SERIAL_CONSOLES. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* linux/xilinx-kmeta: Consolidate zybo-linux-bd-zynq7 configsNathan Rossi2017-10-181-3/+1
| | | | | | | | | Consolidate the BSP specific configs for the ZYBO Linux-BD BSP. Move Xilinx DRM fragment under bsp/xilinx/soc/drivers-drm, this fragment is currently only useful for linux-xlnx targets. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* tune-*.inc: Remove KMACHINENathan Rossi2017-10-183-10/+0
| | | | | | | | | | | KMACHINE is now set by the kernel recipe, this is due to different kernels providing different kmeta sources which can provide one or more different KMACHINEs for a specific machine. Additionally linux-xlnx no longer uses KMACHINEs and is defaulted to the linux-xlnx trees defconfigs. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zynqmp-pmu-config.inc: Restrict BPNs furtherNathan Rossi2017-10-181-8/+9
| | | | | | | | | Restrict binutils and gcc to their -cross variant only. This prevents world targets from selecting zynqmp-pmu-gcc/binutils which require more dependencies. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com>
* pmu-firmware: Make the recipe provide virtual/pmu-firmwareNathan Rossi2017-10-021-1/+2
| | | | | | | | | | | | | | | Make the pmu-firmware recipe provide a non-prefixed virtual/pmu-firmware. Due to the common use of a class extender the PROVIDES variable will be remapped with the 'zynqmp-pmu-' prefix. In order to ensure the provider is always without a prefix modify the PROVIDES after the recipe has been parsed (and any class extender mapping is already processed). Additionally set the zcu102-zynqmp machine to use the virtual/pmu-firmware target and set the zynqmp-pmu-pmu-firmware recipe as the default provider. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* ep108-zynqmp.conf: Remove ep108Manjukumar Matha2017-10-021-28/+0
| | | | | | | | Emulation Platform is no longer required, MPSoC is in production Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
* zynqmp-pmu-config.inc: Limit to specific recipesNathan Rossi2017-08-271-2/+16
| | | | | | | | | | | | | | | | | | | | | | | Limit the appending/enabling of the zynqmp-pmu BBCLASSEXTEND to only specific recipes which are used for the building of pmu-firmware. This is just binutils, gcc, newlib, libgloss and pmu-firmware itself. The limiting is done based on the BPN of the recipe, which is not provided as an override so the conditional is tested with an inline python function. This change removes the need for the extender class to be enabled globally which can conflict with certain recipes that were not written to be extended by the BBCLASSEXTEND mechanism. This change also improves the parse time avoiding the need to parse all recipes for both target and zynqmp-pmu. Add comment for the PACKAGE_EXTRA_ARCHS setting, so it is clear why it is set. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com>
* machine-xilinx-default.inc: Remove image_types_ubootAlistair Francis2017-08-201-1/+0
| | | | | | | | This has changed in the meta layer and breaks the build, as it appears it is no longer required just remove it. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* feature-microblaze-versions.inc: Remove v7.* MicroBlaze CPU VersionsNathan Rossi2017-07-112-5/+2
| | | | | | | | | | | | | | | | These versions of the MicroBlaze CPU are now considerably outdated and were obsoleted in 2012. Additionally they were only available with the big endian configuration. Remove the v7.30 tune feature. The s3adsp1800-qemu-microblazeeb machine emulates a v7.10.d cpu version, however QEMU does not limit the CPU being emulated and provides all CPU instructions and features that are available, so build targeting v8.00 instead. Also fix up the version formatting generated by microblaze_current_version. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* meta: introduce bigendian instead of little-endian/big-endianMing Liu2017-07-115-12/+8
| | | | | | | | | | | | | The endianess of a specific architecture could be either big or little, there is not a third value, so let it default to be little endian, and get rid of the tune feature 'little-endian' which is redundant to be there, also change tune feature 'big-endian' to 'bigendian'. With these changes, it will behave same with all other architectures in openembedded-core layer. Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* ep108-zynqmp: Re-enable 'qemuboot' image classNathan Rossi2017-06-031-0/+1
| | | | | | | | | | | Re-enable the 'qemuboot' image class which is used to generate qemuboot.conf for the ep108-zynqmp machine. This used to be set by machine-xilinx-qemu.inc but as of the 'qemuboot-xilinx.bbclass: Rework qemu-xilinx setup' commit is no longer set by default. The same commit setup other machines to use the 'qemuboot' image class directly but skipped this machine. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zcu102-zynqmp: Remove pinning of older kernel, u-boot and atf versionsNathan Rossi2017-06-031-6/+0
| | | | | | | | | | Remove the version pinning to the older kernel, u-boot and arm-trusted-firmware versions. These versions are now functional as pmu-firmware can be built and executed for the zcu102 physical hardware as well as within QEMU. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com>
* zcu102-zynqmp: Setup the use of multiarch QEMUNathan Rossi2017-06-032-3/+24
| | | | | | | | | Setup the qemuboot variables and qemu-xilinx-helper-native environment to use the multiarch script to start a QEMU multiarch instance with the MicroBlaze PMU. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com>
* zcu102-zynqmp: Enable building of PMU recipes and build pmu firmwareNathan Rossi2017-06-032-1/+8
| | | | | | | | | Enable the building of 'zynqmp-pmu' recipes, and setup the pmu-firmware to be built for the image. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Koteswararao Nayudu <kotin@xilinx.com>
* machine-xilinx-default.inc: Remove xserver-xorg-extension-glxManjukumar Matha2017-05-301-5/+1
| | | | | | | | | xserver-xorg-extension-glx is a software support, the performance is not validate on Xilinx platform. Instead convert application to depend on egl/gles1/gles2. MALI400 provides the required hardware acceleration Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
* zcu102-zynqmp.conf: Remove mali as machine featureManjukumar Matha2017-05-302-5/+1
| | | | | | | | | | | | | | | Remove mali as machine feature. This is not required, any dependencies on mali userspace libraries should be resolved through gles1/gles2/egl preffered provider. for ex: PREFERRED_PROVIDER_virtual/libgles1_zynqmp = "libmali-xlnx" PREFERRED_PROVIDER_virtual/libgles2_zynqmp = "libmali-xlnx" PREFERRED_PROVIDER_virtual/egl_zynqmp = "libmali-xlnx" MALI userspace libraries inturn should depends on out-of-tree mali kernel module. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
* arm-trusted-firmware_git.bb: Make ATF machine independentManjukumar Matha2017-05-301-1/+1
| | | | | | | | Make arm-trusted-firmware machine independent Signed-off-by: Cyril Chemparathy <cyril.chemparathy@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
* feature-microblaze-versions.inc: Simplify version formatting functionsNathan Rossi2017-05-301-22/+8
| | | | | | | Simplify the functions used to generate the TUNE_CCARGS and PKGARCH version strings. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* arch-microblaze.inc: Invert how the 'reorder' feature is used for v8.30Nathan Rossi2017-05-302-11/+7
| | | | | | | | | | | | | | | | | | | With Xilinx MicroBlaze v8.30 a configuration issue requires that the 'pattern-compare' feature is enable for the 'reorder' feature to be correctly functional. Previously the MicroBlaze tune setup would assume that 'pattern-compare' was available even when it may not actually be, and would force enable the 'pattern-compare' feature automatically. This behaviour is prone to issues and may emit broken binaries for a target when the user was not aware or expected that there target CPU was broken. This change inverts the behaviour such that instead of implicitly enabling the 'pattern-compare' feature it instead does not enable generation of reorder instructions for the compiler by setting '-mno-xl-reorder' in the same way as the case that the target does not have the feature enabled. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zcu102-zynqmp: Enable all the zcu102 kernel device treesNathan Rossi2017-05-301-1/+1
| | | | | | | | | | | | Enable all of the available kernel device trees for the zcu102. This includes the 'zcu102-zynqmp.dtb'. The 'revB' device tree is kept as the first entry due to its use for QEMU. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Acked-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Tested-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* *-zynq7: Change some boards to mainline U-Boot by defaultNathan Rossi2017-05-303-0/+3
| | | | | | | | | | | Change the microzed-zynq7, picozed-zynq7 and zybo-zynq7 machines to use the mainline U-Boot by default. All these machines can be supported by the mainline U-Boot and do not require any of the drivers/features that are only provided in the Xilinx vendor tree (u-boot-xlnx). Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Remove version pinning for linux-xlnxNathan Rossi2017-05-151-2/+0
| | | | | | | Remove the version pinning for linux-xlnx, this allows for using the newest version available without needing to change the include. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zcu102-zynqmp: Pin to pre-v2017.1 versions of kernel, u-boot and atfNathan Rossi2017-05-151-0/+6
| | | | | | | | | | Pin the versions of linux-xlnx, u-boot-xlnx and arm-trusted-firmware to the version prior to xilinx-v2017.1. This is due to the added requirement of pmu-firmware for xilinx-v2017.1. Currently it is not possible to boot the zcu102-zynqmp machine in QEMU with the newer versions due to missing the pmu rom as well as the pmu firmware itself. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* kc705-microblazeel: Pin to u-boot-xlnx at xilinx-v2016.4Nathan Rossi2017-05-151-0/+3
| | | | | | | | Pin the preferred provider and version of the kc705-microblazeel machine to u-boot-xlnx and Xilinx release version xilinx-v2016.4. This is due to patches only available for this version of u-boot-xlnx. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* u-boot-zynq-uenv.bb: Add recipe to generate uEnv.txt environmentNathan Rossi2017-05-157-4/+38
| | | | | | | | | | | | | | | Add a recipe to generate uEnv.txt environments for SD boot of Zynq targets. This replaces the existing uEnv.txt for zc702/zedboard that were manually created and populated only for u-boot-xlnx builds. The generated uEnv.txt files also support auto loading of the fpga bitstream before the kernel. Also enable the use of this recipe for all *-zynq7 machines that use U-Boot and have SD/eMMC available. And additionally setup IMAGE_BOOT_FILES for these machines. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zybo-linux-bd-zynq7: Update to use FORCE_PLATFORM_INITNathan Rossi2017-04-281-1/+1
| | | | | | | Use FORCE_PLATFORM_INIT, setting it to "1" to force U-Boot to use the platform-init from a virtual/xilinx-platform-init provider. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zcu102-zynqmp: Update QB_MEM to 4GB to match boardNathan Rossi2017-04-281-1/+1
| | | | | | | | | Update the QB_MEM value to match the size of memory that is expected to be emulated for the board. The ZCU102 board has 4GB of DRAM attached to the PS. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
* qemuboot-xilinx.bbclass: Rework qemu-xilinx setupNathan Rossi2017-04-285-36/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change reworks how the meta-xilinx layer enables and provides the custom version of QEMU based on Xilinx's fork of QEMU. The existing implementation relied on the single sysroot which was changed in oe-core such that now recipes have their own sysroots (RSS support). Additionally oe-core now provides the QEMU binaries to the runqemu script via the 'qemu-helper-native' recipes sysroot as opposed to the image sysroot. These rework changes allow for a single machine to select the targeted QEMU version as well as to provide the qemuboot config specific to the targeted QEMU version. The selection of QEMU version is now handled by PREFERRED_PROVIDER mechanics with the meta-xilinx layer providing an additional recipe that is equivalent to qemu-helper-native and which also provides said target allowing for the machine to select via the use of PREFERRED_PROVIDER_qemu-helper-native. This recipe (qemu-xilinx-helper-native) however instead provides the sysroot populated with qemu-xilinx instead of qemu. Additionally the XILINX_QEMUBOOT variable is replaced with the qemuboot-xilinx.bbclass, this provides the overrides for setting up qemu-xilinx specific QB_* args. Additionally this bbclass points runqemu at the qemu-xilinx-helper-native sysroot for QEMU binaries. These changes also work towards making the meta-xilinx layer better handle multiple qemuboot.conf variants as well as handling different QEMU versions. This change also removes the 'qemu-system-xilinx' MACHINE_FEATURES, this is due to MACHINE_FEATURES no longer being available for native recipes. Additionally there is no longer any logic that needs to know this any way. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
* machine-xilinx-qemu.inc: Don't use MACHINE_DEVICETREE for dtb detectionNathan Rossi2017-04-262-7/+11
| | | | | | | | Avoid using the MACHINE_DEVICETREE variable for detection of the device tree that needs to be loaded. Instead only rely on IMAGE_BOOT_FILES or KERNEL_DEVICETREE. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* device-tree.bbappend: Move use of MACHINE_DEVICETREE to SRC_URINathan Rossi2017-04-265-13/+0
| | | | | | | | | | | | | | | | | | | | | Remove the use of MACHINE_DEVICETREE for providing sources to device-tree, instead provide the device tree sources as SRC_URI entires. Whilst this was already being done automatically by the MACHINE_DEVICETREE logic it also created a non-standard way of providing the device tree sources to the recipe. The setup of SRC_URI is done via the use of a device-tree.bbappend instead of directly in the device-tree.bb recipe itself. This is for two reason, separation of the source from the build logic as well as to provide an example for how a user can extend the device-tree recipe to provide custom device tree sources in their layer. This change also moves the paths to the sources around, this is to align the names of the directories to match the OVERRIDES so that when expanding the file paths it will search the subdirs based on the OVERRIDES or machine names. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Remove linux-yocto version pinningNathan Rossi2017-04-261-1/+0
| | | | | | | Use the newest available on targets that default to using linux-yocto. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com>
* arch-microblaze.inc: Consolidate MicroBlaze tune featuresNathan Rossi2017-03-3111-77/+77
| | | | | | | | | | | | | | | | This change adds the 'arch-microblaze.inc' architecture tune features include which provides all the relevant tune features for MicroBlaze. This include replaces the 'tune-microblaze-features.inc' include, which is not actually a valid TUNE. This change results in the MicroBlaze tune and tune feature include tree matching the layout of meta/. This change additionally consolidates all the smaller includes (feature-microblaze-*.inc) into larger sets or into the arch-microblaze.inc. This makes the package arch string ordering much clearer as well as removing the large number of variables uses to set the TUNE_CCARGS. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* feature-microblaze-versions.inc: Clean up and consolidationNathan Rossi2017-03-316-89/+106
| | | | | | | | | | | | Clean up the MicroBlaze versions tunes as well and improve the TUNECONFLICTS for version features so that the conflicts matrix is automatically generated. Additionally consolidate the version features into a single include. Improve and generate the "-mcpu=" and package strings based on the version feature. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Remove UBOOT_OFEMBED for UBOOT_BINARYNathan Rossi2017-03-091-5/+1
| | | | | | | | | Both u-boot-xlnx and u-boot (mainline) now agree on the name for the output binary which includes the dtb. Additionally both versions load 'u-boot.img' from SPL. The UBOOT_OFEMBED variable and conditional value setting are no longer needed. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* linux-xlnx: Update to the xilinx-v2016.4 releaseNathan Rossi2017-02-161-1/+1
| | | | | | | | | Update the linux-xlnx recipe to point at the xilinx-v2016.4 release. Note that this changes the naming convention for the .bb file, this has no affect on the value of PV since it is specific in the recipe itself. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zcu102-zynqmp: Default qemuboot to using Xilinx QEMUNathan Rossi2017-02-162-10/+10
| | | | | | | | | | Currently the mainline QEMU is lacking full support for emulating the ZCU102 board. So use the more functional Xilinx QEMU for this board. Also reformat some of the appends to QB_* variables for clarity. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
* zcu102-zynqmp: fix machine name in confJean-Francois Dagenais2017-02-141-1/+1
| | | | | Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* conf/machine/*.conf: Move to QB_NETWORK_DEVICE for QEMU targetsNathan Rossi2017-02-015-10/+5
| | | | | | | | | | | | | Move the setup of network devices to the new QB_NETWORK_DEVICE variable, this avoids the need to configure slirp or tap options from the machine configuration. Additionally this provides the benefit of letting runqemu handle the setup of tap and slirp arguments, allowing for it to provide features such as host-guest port forwarding for slirp. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com>
* zcu102: Add support for running Xilinx's QEMUAlistair Francis2017-01-181-1/+18
| | | | | Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-qemu.inc: Add support for starting Xilinx's QEMUAlistair Francis2017-01-181-0/+33
| | | | | | | | This patch adds support to the general include file to boot Xilinx's QEMU machines. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zynqmp: Consolidate the QEMU dependenciesAlistair Francis2017-01-182-8/+0
| | | | | Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Add XSERVERManjukumar Matha2016-12-021-0/+14
| | | | | | | Add X org X server configurations, armsoc driver for zynqmp Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* linux-xlnx_4.4: Drop this version it is supersededNathan Rossi2016-11-191-1/+1
| | | | | | | The v4.4/xilinx-v2016.2 version of the linux-xlnx kenrel is dropped in favour of the newer 4.6/xilinx-v2016.3 kernel. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zc706-zynq7: add missing support for ext3.Cyril Chemparathy2016-11-191-1/+1
| | | | | | | This seems to have been missed out at some point along the way. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* feature-microblaze-*: Add Microblaze v10.0 IPManjukumar Matha2016-11-022-9/+16
| | | | | | | Add v10.0 IP for microblaze Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemu* -> *qemu-*: Rename QEMU machinesNathan Rossi2016-10-273-4/+4
| | | | | | | | | | | | | | | Rename the QEMU machines to match the <board>-<design>-<arch> convention. QEMU only machines no longer need to be named qemu*. Note for qemuzynq it is special in that it does not model a board, as such it has no board in the name being just 'qemu-zynq7'. This updates the README.md to match the new machine names. Additional update all occurrences of the qemu* machines Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
* zynqmp: Update the machines to take advantage of Xilinx's QEMUAlistair Francis2016-10-112-0/+8
| | | | | | | | Now that their is a .bb for Xilinx's QEMU and QEMU device trees we can update the machines to ensure this is built where applicable. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Update default linux-yocto version to 4.8Nathan Rossi2016-10-111-1/+1
| | | | Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Set UBOOT_OFEMBED for u-boot-xlnx-devNathan Rossi2016-10-111-1/+1
| | | | | | | The u-boot-xlnx-dev version of u-boot is the same as u-boot-xlnx source, it generates with OF_EMBED=y. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-qemu.inc: Move common runqemu setup to includeNathan Rossi2016-10-116-40/+45
| | | | | | | | | | | | | Move the common setup for QEMU machines into an include call 'machine-xilinx-qemu.inc'. This include is added to any machine that has a QEMU model. It sets up common QB_* values as well as inheriting the qemuboot class and adding the EXTRA_IMAGEDEPENDS on qemu-native. This include also has helper functions to automatically determine the DTB from KERNEL_DEVICETREE/MACHINE_DEVICETREE and automatically setup the 'console=' kernel command line based on SERIAL_CONSOLE. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-06 16:51:54 +0000