summaryrefslogtreecommitdiffstats
path: root/conf
Commit message (Collapse)AuthorAgeFilesLines
* qemumicroblaze-s3adsp1800: Add runqemu supportNathan Rossi2016-09-301-0/+11
| | | | | | | | Add runqemu support using the 'petalogix-s3adsp1800' QEMU machine. Based on the qemumicroblaze runqemu setup. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
* ep108-zynqmp, zcu102-zynqmp: Add runqemu supportNathan Rossi2016-09-302-1/+27
| | | | | | | | | | The ep108-zynqmp machine already has support in QEMU however was exposed as the qemuzynqmp machine. QEMU 2.7 introduced support for the 'xlnx-zcu102' machine model. This allows for runqemu to boot a machine based on the ep108 or zcu102 hardware. The support added is based on the configuration that was in qemuzynqmp. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemuzynqmp: Remove this machineNathan Rossi2016-09-301-19/+0
| | | | | | | | Remove this machine due to it not being required. The runqemu tools now support running machines base on bsp layer configuration which ep108-zynqmp now provides. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemuzynq, qemumicroblaze: Improve runqemu supportNathan Rossi2016-09-302-4/+10
| | | | | | | | | * Handle slirp/tap networking separately. * Force the use of serial port and always disable graphics since the qemuzynq and qemumicroblaze targets do not support any graphics Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
* conf/machine: update for new runqemuRobert Yang2016-09-283-0/+29
| | | | | | | | | The new runqemu has removed machine knowledge, these info can set in bsp's conf file, please see oe-core's meta/classes/qemuboot.bbclass for more info. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Only recommend mali when machine has featureNathan Rossi2016-08-171-1/+1
| | | | | | | Only recommend the kernel-module-mali if the kernel provider is currently linux-xlnx and the current machine has the 'mali' feature. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zcu102-zynqmp: Add the 'mali' machine featureNathan Rossi2016-08-171-1/+1
| | | | Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Only recommend mali module for linux-xlnxNathan Rossi2016-08-071-1/+3
| | | | | | | | | Only recommend the kernel-module-mali if the kernel provider is currently linux-xlnx. This is due to linux-xlnx providing the support for this external module, other kernels such as linux-yocto do not support it. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Fix misspelled "kernel-module-mali"Mike Looijmans2016-08-071-1/+1
| | | | | | | | The kernel module is named "kernel-module-mali", not "kernel-module-mali-modules" Fix this in machine-xilinx-default.inc. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemuzynmp: Add the qemuzynqmp machineAlistair Francis2016-06-222-0/+9
| | | | | | | Add the qemuzynqmp machine based on the EP108 board. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Add MALI kernel moduleManjukumar Matha2016-05-261-0/+3
| | | | | | | Enable adding the MALI kernel module to the image for ZynqMP machines Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Disable 'qemu-usermode' for MicroBlazeNathan Rossi2016-05-181-0/+3
| | | | | | | | | | | | | The qemu-usermode machine feature enables the ability for using QEMU linux-user during the host build. This allows for the distro feature gobject-introspection-data to use linux-user mode of QEMU to generate data. But this process is broken on MicroBlaze due to issues with glib and the MicroBlaze toolchain. This change disables the use of QEMU linux-user and is a workaround to avoid the execution of the gobject-introspection-data process which is default enabled in commonly used distros ('nodistro' and 'poky'). Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* kc705-microblazeel.conf: Support for KC705 kitManjukumar Matha2016-05-131-0/+24
| | | | | | | Support for KC705 board kit Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: uboot format is binManjukumar Matha2016-05-131-0/+1
| | | | | | | u-boot output is bin suffix format for KC705 microblaze Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* feature-microblaze-*.inc: Updated to v9.6Manjukumar Matha2016-05-132-8/+13
| | | | | | | Update to the latest v9.6 tune feature Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* kc705-trd-microblazeel: Remove kc705-trd filesManjukumar Matha2016-05-131-29/+0
| | | | | | | Remove old kc705-trd reference Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Update default linux-yocto version to 4.4Nathan Rossi2016-05-051-1/+1
| | | | Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zcu102-zynqmp.conf: Add support for ZCU102 boardManjukumar Matha2016-05-041-0/+23
| | | | | | | Add support for ZCU102 Zynq UltraScale+ MPSoC evaluation board Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zybo-linux-bd-zynq7: Use FORCE_PS7INIT to override platform-initNathan Rossi2016-05-031-0/+1
| | | | | | | Override the platform init provided in U-Boot sources for the 'zybo' board. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zybo-linux-bd-zynq7: Force default kernel and u-bootNathan Rossi2016-05-031-0/+3
| | | | | | | | | | The zybo-linux-bd-zynq7 machine relies on drivers from the linux-xlnx kernel, default the machine to use the linux-xlnx kernel. The machine also relies on functionality and patching of the mainline u-boot (as opposed to u-boot-xlnx). Default to the mainline u-boot. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zybo-linux-bd-zynq7: Enable required kernel driversJason Wu2016-05-031-0/+7
| | | | | | | Enable DRM, SND, KP-GPIO and V4L2 kconfigs Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* conf/machine: Add zybo-linux-bd-zynq7 machine supportJason Wu2016-05-031-0/+31
| | | | | | | | | * base on Zybo linux_bd reference design * Add device tree with required nodes * hdf is fetch from Digilent github Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* external-xilinx-toolchain: Remove toolchain supportManjukumar Matha2016-05-032-193/+0
| | | | | | | | | | This patch removes the Xilinx SDK toolchain support in meta-xilinx BSP layer. A new distro layer called meta-petalinux will be available as of May 9th 2016. The recipes to support the Xilinx SDK toolchain will added to this distro layer. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Default to v4.4 kernelManjukumar Matha2016-05-031-1/+1
| | | | | | | Default preferred version for Xilinx kernel is v4.4 Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* conf/machine/*-zynq7.conf: Use 'spl/boot.bin' for Zynq SPL imagesNathan Rossi2016-03-316-6/+6
| | | | | | | | The boot.bin built by u-boot is located in spl/boot.bin, this is now the default location of the build product and is consistent between mainline and the Xilinx vendor tree. This was upstream as of v2016.01 of u-boot. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Handle 'u-boot-dtb.img' for ZynqNathan Rossi2016-03-251-1/+6
| | | | | | | | | Handle the case where mainline u-boot does not default to having the target device tree embedded into the u-boot ELF via OF_EMBED, which is default for the u-boot-xlnx source tree. Select the UBOOT_BINARY value based on the currently configured virtual/bootloader provider. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-*.inc: Remove default append for 'device-tree'Nathan Rossi2016-03-066-5/+4
| | | | | | | | | | * The device-tree recipe is not required for all machines or all boards, remove the default append to allow each machine to add the dependency when needed * Add the 'device-tree' as a machine RDEPEND for all machines that use the device-tree recipe to obtain the machines device tree output Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zybo-zynq7: Switch over to in kernel device treeNathan Rossi2016-03-063-88/+3
| | | | | | | | | | * Switch to the device tree that is available in the kernel source tree * Remove the in layer device tree and configuration for the in layer device tree * Setup IMAGE_BOOT_FILES with the correct target device tree from the kernel source/recipe Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zc706-zynq7: Switch over to in kernel device treeNathan Rossi2016-03-063-154/+2
| | | | | | | | * Switch to the device tree that is available in the kernel source tree * Remove the in layer device tree and configuration for the in layer device tree Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zedboard-zynq7: Switch over to in kernel device treeNathan Rossi2016-03-063-90/+3
| | | | | | | | | | | * Switch to the device tree that is available in the kernel source tree * Remove the in layer device tree and configuration for the in layer device tree * Setup IMAGE_BOOT_FILES with the correct target device tree from the kernel source/recipe * Setup U-Boot uEnv.txt to use the correct target device tree Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zc702-zynq7: Switch over to in kernel device treeNathan Rossi2016-03-063-161/+3
| | | | | | | | | | | * Switch to the device tree that is available in the kernel source tree * Remove the in layer device tree and configuration for the in layer device tree * Setup IMAGE_BOOT_FILES with the correct target device tree from the kernel source/recipe * Setup U-Boot uEnv.txt to use the correct target device tree Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* picozed-zynq7: Rework device tree to use kernel source includeNathan Rossi2016-03-063-86/+2
| | | | | | | | | * Rework the picozed-zynq7.dts device tree to use the kernel source include 'zynq-7000.dtsi' * Store the new device tree in the device-tree recipe directory * Remove existing device tree from conf/machine/boards Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* microzed-zynq7: Rework device tree to use kernel source includeNathan Rossi2016-03-063-86/+2
| | | | | | | | | * Rework the microzed-zynq7.dts device tree to use the kernel source include 'zynq-7000.dtsi' * Store the new device tree in the device-tree recipe directory * Remove existing device tree from conf/machine/boards Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* kc705-trd-microblazeel: Move device tree to device-tree recipeNathan Rossi2016-03-062-527/+1
| | | | | | | | * Move the device tree into the source files directory for the device-tree recipe * Use non-immediate set for MACHINE_DEVICETREE Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemuzynq: Remove older device-treesNathan Rossi2016-03-062-75/+0
| | | | Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemuzynq: Rework device tree to use kernel source includeNathan Rossi2016-03-061-4/+1
| | | | | | | | * Rework the qemuzynq.dts device tree to use the kernel source include 'zynq-7000.dtsi' * Store the new device tree in the device-tree recipe directory Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* device-tree.bb: Move zynq7-base.dtsi into recipe sourceNathan Rossi2016-03-062-509/+0
| | | | | | | | | * Move zynq7-base.dtsi out of conf/machine/boards and into the files/ directory of the device-tree recipe * Also move the config from machine-xilinx-default.inc that includes the dtsi for zynq targets Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* tune-zynq: Change ABI to hard-float with thumbManjukumar Matha2016-02-291-1/+1
| | | | | | | | | Zynq-7000 devices support hard-float with thumb-2 instruction set. Xilinx SDK toolchain with hard-float enabled will be available from v2016.1 release. Hence the ABI needs to change to match the toolchain. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* u-boot-extra.inc: Retire use of this configuration frameworkNathan Rossi2016-01-062-49/+0
| | | | | | | | | This is only used by MicroBlaze targets for U-Boot, and due to U-Boot moving to Device Model this is no longer sufficent to configure U-Boot. Instead support for MicroBlaze must be added by patches to U-Boot with partial DM and xparameters support. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-default.inc: Update default linux-xlnx to 4.0%Nathan Rossi2016-01-061-1/+1
| | | | Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemuzynq: Update clock work around for QEMU 2.5+Nathan Rossi2015-12-281-4/+4
| | | | | | | The GEM phy in QEMU 2.5+ reports a link speed of 100Mbps, which requires a slower clock. Change the fixed clock to provide a 25MHz reference. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zynq7-base.dtsi: Update for newer kernelsNathan Rossi2015-12-211-7/+22
| | | | | | | Update compatiblity with newer kernels. Adding new properties and nodes where available. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* Fix up UBOOT_BINARY for Zynq and setup SPL to load correctlyNathan Rossi2015-11-261-1/+0
| | | | | | | | | | u-boot-xlnx 'xilinx-v2015.2' (fixed in newer versions) incorrectly sets the SPL image to load as 'u-boot-dtb.img' despite the images being built having embedded device trees (OF_EMBED=y). This change fixes this up so that there are no hacks to the u-boot recipes and no overrides to use the incorrectly named U-Boot image file. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* conf/machine/*-zynq7.conf: Update the configuration of SPLNathan Rossi2015-11-266-11/+6
| | | | | | | | | | Machines now only need to set SPL_BINARY to 'boot.bin' to enable the generation of boot.bin and/or u-boot-spl binaries. If a machine sets SPL_BINARY and does not provide any way to attain the platform init code bitbake will fail with a dependency error. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* zc70*-zynq7: Update U-Boot configNathan Rossi2015-11-262-4/+4
| | | | | | | | Newer versions of U-Boot provide seperate configs for the ZC702 and ZC706, setup the machines to use the correct config corresponding to the machine. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* ep108-zynqmp: U-Boot config name changedNathan Rossi2015-11-261-1/+1
| | | | | | | The name of the U-Boot configuration for the EP108 board/QEMU changed to 'xilinx_zynqmp_ep_config'. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* Fix up use of '_append +='Nathan Rossi2015-11-263-4/+4
| | | | | | | | | | | | The use of '_append' and '+=' together is considered bad practice within recipes. It is preferred to explicitly add the preceeding spaces where they are applicable instead of using the '+=' to achieve the same result. Change all the uses of '_append +=' to match the recommended pattern, adding in spaces where explicitly required. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* layer.conf: Remove unnecessary early expansion with ':='Nathan Rossi2015-11-261-3/+3
| | | | | | | | | | Avoid the use of early expansion operator. This change is done because LAYERDIR immediate expansion is handled automatically by bitbake. This change brings the layer.conf in-line with common practices used by other layers. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* machine-xilinx-*.inc: Not all MicroBlaze machines need device-treeNathan Rossi2015-09-242-2/+3
| | | | | | | * Not all MicroBlaze machines need the 'device-tree' dependency, move this to being a board common setup Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
* qemumicroblaze: Remove device-tree usageNathan Rossi2015-09-242-407/+0
| | | | | | | | | * Remove the qemumicroblaze device-tree as instead of using a in layer device tree the device tree that is provided as part of QEMU is used * Update device-tree recipe removing the need for the runqemu compatiblity for qemumicroblaze Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-06 11:04:32 +0000