summaryrefslogtreecommitdiffstats
path: root/meta-xilinx-bsp/conf
Commit message (Collapse)AuthorAgeFilesLines
...
* zcu102-zynqmp.conf: Modify PMU_FIRMWARE_DEPLOY_DIR and PMU_FIRMWARE_IMAGE_NAMESai Hari Chandana Kalluri2020-02-201-2/+2
| | | | | | | | | Set the correct PMU_FIRMWARE_DEPLOY_DIR and PMU_FIRMWARE_IMAGE_NAME based on the flow used to build images. If multiconfig flow is enabled pick pmu elf from pmutmp directory else pick elf from DEPLOYDIR. This is required to ensure that runqemu boots correctly by picking the elfs from the correct path. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* zcu208-zynqmp: Add support for zcu208 boardSwagath Gadde2020-02-201-0/+38
| | | | | | | | | | | Add machine configuration for zcu208 RFSoC board With required settings for board specific yocto variables needed for compilation of bootloader and kernel. -linux-xlnx is kernel provider -u-boot-xlnx is u-boot provider Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* zcu1285-zynqmp.conf:using common u-boot defconfigVaralaxmi Bingi2020-02-171-1/+1
| | | | | | | | This patch will use common uboot defconfig for zcu1285 bsp. Signed-off-by: Varalaxmi Bingi <varalaxmi.bingi@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* tune-cortexrm: Include PACKAGE_EXTRA_ARCHS to avoid parsing errorsAlejandro Enedino Hernandez Samaniego2020-02-131-1/+3
| | | | Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
* cortexr5-zynqmp.conf: Include the tune inc file from the correct pathAlejandro Enedino Hernandez Samaniego2020-02-131-1/+1
| | | | Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
* cortexr5-versal.conf: Include the tune inc file from the correct pathAlejandro Enedino Hernandez Samaniego2020-02-131-1/+1
| | | | Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
* zedboard-zynq7.conf:update u-boot binary nameSai Hari Chandana Kalluri2020-02-121-1/+1
| | | | | | | | currently u-boot binary is copied which has debug info and size of 5.7M so updating the UBOOT_ELF_zynq variable to copy the u-boot.elf instead u-boot. Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* Adjust the microblaze standalone toolchain to match vitis expectations.Mark Hatle2020-02-101-112/+442
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the following multilibs: . le bs p m fpd m/fpd p/m p/fpd p/m/fpd bs/p bs/m bs/fpd bs/m/fpd bs/p/m bs/p/fpd bs/p/m/fpd le/m64 le/bs le/p le/m le/fpd le/m/fpd le/p/m le/p/fpd le/p/m/fpd le/bs/p le/bs/m le/bs/fpd le/bs/m/fpd le/bs/p/m le/bs/p/fpd le/bs/p/m/fpd le/m64/bs le/m64/p le/m64/m le/m64/fpd le/m64/m/fpd le/m64/p/m le/m64/p/fpd le/m64/p/m/fpd le/m64/bs/p le/m64/bs/m le/m64/bs/fpd le/m64/bs/m/fpd le/m64/bs/p/m le/m64/bs/p/fpd le/m64/bs/p/m/fpd Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
* microblaze-tc: Minor update and correctionsMark Hatle2020-02-101-35/+32
| | | | Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
* u-boot-xlnx:Update UBOOT-MACHINE to xilinx_zynqmp_virt_defconfig for all ↵Sai Hari Chandana Kalluri2020-02-079-9/+9
| | | | | | | | | zynqmp machines Update UBOOT MACHINE defconfig to xilinx_zynqmp_virt_defconfig instead of using custom machine specifc defconfigs. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* conf/machine/kc705-microbalzeel.conf: Fix U-boot defconfigSandeep Gundlupet Raju2020-02-051-1/+1
| | | | | | | This patch fixes use of right microblaze-generic_defconfig Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* Fix arm cortex r/m profilesMark Hatle2020-02-054-45/+37
| | | | | | | | | | | As part of the merge of the code bases, changes were introduced that changed the way the cortexr5 was defined. To sync this between the baremetal compilation and the baremetal toolchain compilation we create a new armrm tune file, define a new tune feature of 'armrm', define 'armrm' as a new machine override based on the feature 'armrm', and move the cortexr5 tuning to a common file. Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
* Create new baremetal toolchain machinesMark Hatle2020-01-315-0/+734
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Baremetal toolchain machines are specific to creating a very specific Xilinx multilib toolchain configuration. These are not expected to be functional MACHINE parameters for anything except SDK building. The expected usage is: MACHINE=<value> DISTRO=xilinx-standalone bitbake meta-toolchain Add aarch32-tc Multilibs: base: (none) arm/v5te/softfp: -marm -march=armv5te+fp -mfloat-abi=softfp arm/v5te/hard: -marm -march=armv5te+fp -mfloat-abi=hard thumb/nofp: -mthumb -mfloat-abi=soft thumb/v7/nofp: -mthumb -march=armv7 -mfloat-abi=soft thumb/v7+fp/softfp: -mthumb -march=armv7+fp -mfloat-abi=softfp thumb/v7+fp/hard: -mthumb -march=armv7+fp -mfloat-abi=hard thumb/v7-a/nofp: -mthumb -march=armv7-a -mfloat-abi=soft thumb/v7-a+fp/softfp: -mthumb -march=armv7-a+fp -mfloat-abi=softfp thumb/v7-a+fp/hard: -mthumb -march=armv7-a+fp -mfloat-abi=hard thumb/v7-a+simd/softfp: -mthumb -march=armv7-a+simd -mfloat-abi=softfp thumb/v7-a+simd/hard: -mthumb -march=armv7-a+simd -mfloat-abi=hard thumb/v7ve+simd/softfp: -mthumb -march=armv7ve+simd -mfloat-abi=softfp thumb/v7ve+simd/hard: -mthumb -march=armv7ve+simd -mfloat-abi=hard thumb/v8-a/nofp: -mthumb -march=armv8-a -mfloat-abi=soft thumb/v8-a+simd/softfp: -mthumb -march=armv8-a+simd -mfloat-abi=softfp thumb/v8-a+simd/hard: -mthumb -march=armv8-a+simd -mfloat-abi=hard Add aarch64-tc Multilibs: Base: (none) ilp32: -mabi=ilp32 - ilp32 requires a custom machine dict - Add xlnx-standalone.bbclass - Enable with PACKAGEQA_EXTRA_MACHDEFFUNCS Add arm-rm-tc Multilibs: Base: (none) arm/v5te/softfp: -marm -march=armv5te+fp -mfloat-abi=softfp arm/v5te/hard: -marm -march=armv5te+fp -mfloat-abi=hard thumb/nofp: -mthumb -mfloat-abi=soft thumb/v7/nofp: -mthumb -march=armv7 -mfloat-abi=soft thumb/v7+fp/softfp: -mthumb -march=armv7+fp -mfloat-abi=softfp thumb/v7+fp/hard: -mthumb -march=armv7+fp -mfloat-abi=hard thumb/v6-m/nofp: -mthumb -march=armv6s-m -mfloat-abi=soft thumb/v7-m/nofp: -mthumb -march=armv7-m -mfloat-abi=soft thumb/v7e-m/nofp: -mthumb -march=armv7e-m -mfloat-abi=soft thumb/v7e-m+fp/softfp: -mthumb -march=armv7e-m+fp -mfloat-abi=softfp thumb/v7e-m+fp/hard: -mthumb -march=armv7e-m+fp -mfloat-abi=hard thumb/v7e-m+dp/softfp: -mthumb -march=armv7e-m+fp.dp -mfloat-abi=softfp thumb/v7e-m+dp/hard: -mthumb -march=armv7e-m+fp.dp -mfloat-abi=hard thumb/v8-m.base/nofp: -mthumb -march=armv8-m.base -mfloat-abi=soft thumb/v8-m.main/nofp: -mthumb -march=armv8-m.main -mfloat-abi=soft thumb/v8-m.main+fp/softfp: -mthumb -march=armv8-m.main+fp -mfloat-abi=softfp thumb/v8-m.main+fp/hard: -mthumb -march=armv8-m.main+fp -mfloat-abi=hard thumb/v8-m.main+dp/softfp: -mthumb -march=armv8-m.main+fp.dp -mfloat-abi=softfp thumb/v8-m.main+dp/hard: -mthumb -march=armv8-m.main+fp.dp -mfloat-abi=hard Add microblaze-tc Multilibs: base: (none) bs: -mxl-barrel-shift le: -mlittle-endian m: -mno-xl-soft-mul m/mh: -mno-xl-soft-mul -mxl-multiply-high le/m: -mlittle-endian -mno-xl-soft-mul le/m/mh: -mlittle-endian -mno-xl-soft-mul -mxl-multiply-high bs/le: -mxl-barrel-shift -mlittle-endian bs/m: -mxl-barrel-shift -mno-xl-soft-mul bs/m/mh: -mxl-barrel-shift -mno-xl-soft-mul -mxl-multiply-high bs/le/m: -mxl-barrel-shift -mlittle-endian -mno-xl-soft-mul bs/le/m/mh: -mxl-barrel-shift -mlittle-endian -mno-xl-soft-mul -mxl-multiply-high m64/le: -m64 -mlittle-endian m64/le/m: -m64 -mlittle-endian -mno-xl-soft-mul m64/le/m/mh: -m64 -mlittle-endian -mno-xl-soft-mul -mxl-multiply-high m64/bs/le: -m64 -mxl-barrel-shift -mlittle-endian m64/bs/le/m: -m64 -mxl-barrel-shift -mlittle-endian -mno-xl-soft-mul m64/bs/le/m/mh: -m64 -mxl-barrel-shift -mlittle-endian -mno-xl-soft-mul -mxl-multiply-high - 64-bit MicroBlaze requires a custom machine dict - Add xlnx-standalone.bbclass - Enable with PACKAGEQA_EXTRA_MACHDEFFUNCS Signed-off-by: Mark Hatle <mark.hatle@xilinx.com> Please enter the commit message for your changes. Lines starting with '#' will be ignored, and an empty message aborts the commit. Date: Thu Jan 30 12:17:59 2020 -0800 On branch multilib-baremetal Your branch is ahead of 'xilinx/master-next' by 2 commits. (use "git push" to publish your local commits) Changes to be committed:
* meta-xilinx-bsp: Unify machine confsAlejandro Enedino Hernandez Samaniego2020-01-307-0/+101
| | | | | | | | Unify the meta-xilinx-bsp and meta-xilinx-standalone layers by moving the machine confs to the BSP layer and keeping the standalone layer as a DISTRO layer Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
* Revert "**TEMPORARY**: Removing preferred provider overrides for mali ↵Sai Hari Chandana Kalluri2020-01-291-6/+6
| | | | | | | | backend""" This reverts commit 55aa631780a5d804324bbb348b5df9b5d0c1f934. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* versal-generic: Add versal-generic machine configurationSai Hari Chandana Kalluri2020-01-241-0/+15
| | | | | | Add versal-generic machine configuration Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* Using tune-cortexa72-cortexa53.inc for versal and zynqmp tunesJaewon Lee2020-01-222-4/+4
| | | | | | | | | | | Using the optimized tune file (tune-cortexa72-cortexa53.inc) instead of armv8a tune for versal and zynqmp. Also changing DEFAULTTUNE from aarch64 to cortexa72-cortexa53 as otherwise it was taking aarch64, the first declared default Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
* Revert "Revert "**TEMPORARY**: Removing preferred provider overrides for ↵Sai Hari Chandana Kalluri2020-01-221-6/+6
| | | | | | | mali backend"" This reverts commit 7719c87e2574a6ed2b15b99c43ecbee5cebb3b69. Removing libmali as preferred provider due to CR-1052821
* gdb: Switching microblaze to use upstream gdb version 8.3.1Jaewon Lee2020-01-201-3/+0
| | | | | | | | Previously we were using gdb 7.7.1 just for microblaze for compatibility issues, now switching back to upstream version 8.3.1 and removing no longer needed 7.7.1 bb files and patches Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
* layer.conf: Update XILINX_RELEASE_VERSION to v2020.1Manjukumar Matha2020-01-061-1/+1
| | | | | | Update XILINX_RELEASE_VERSION to v2020.1 Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* Revert "**TEMPORARY**: Removing preferred provider overrides for mali backend"Jaewon Lee2019-12-161-6/+6
| | | | This reverts commit 03115b3c35560617b2ffa9e911a6c1071ff6ad30.
* **TEMPORARY**: Removing preferred provider overrides for mali backendJaewon Lee2019-12-091-6/+6
| | | | | | | | | | | | | | Temporarily removing preferred provider overrides for mali backed to bypass mali packaging issues for ex: Multiple shlib providers for libMali.so.9 QA Issue: /usr/lib/libQt5EglFSDeviceIntegration.so.5.13.2 contained in package qtbase requires libMali.so.9()(64bit), but no providers found in RDEPENDS_qtbase? [file-rdeps] Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
* tune-versal.inc: Rename include file from arch-armv8 to arch-armv8aSai Hari Chandana Kalluri2019-12-091-1/+1
| | | | | | Rename include file from arch-armv8.inc -> arch-armv8a.inc Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* vck190-versal.conf: Add deploy dir for psm and plm firmwareSai Hari Chandana Kalluri2019-12-091-0/+3
| | | | | | Add deploy dir path for plm and psm to support multiconfig builds. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* plm_2019.2.bb: recipe to build plm standaloneSai Hari Chandana Kalluri2019-12-091-0/+3
| | | | | | | | Add recipe to build plm as standalone component. plm is platform loader and manager for versal devices.It performs boot and configuration of the Versal ACAP device. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* tune-versal.inc: Set default SOC_VARIANT = s80Sai Hari Chandana Kalluri2019-12-091-1/+1
| | | | | | Set default SOC_VARIANT for all versal machines as s80. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* vmk180-versal.conf: Add machine configuration for vmk180-versalSai Hari Chandana Kalluri2019-12-091-0/+37
| | | | | | | | | | | | Add machine configuration for vmk180-versal with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* v350-versal.conf: Enforce system.dtb name when using virtual/dtbSai Hari Chandana Kalluri2019-12-091-1/+1
| | | | | | | | Only if user uses virtual/dtb enforce system.dtb name as u-boot looks for system.dtb. Else user can specify a dtb with any name. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* vck-sc-zynqmp: Machine configuration for vck190 system controllerSai Hari Chandana Kalluri2019-12-091-0/+39
| | | | | | | | | | | Add machine configuration vck-sc-zynqmp for vck190 system controller with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* v350-versal.conf:Add versal board configurationMukund PVVN2019-12-091-0/+36
| | | | | | | | Add support to build images for v350-versal board configuration. V350 is a PCIe based card which has s80 Versal part. Signed-off-by: Mukund PVVN <mukundp@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* vc-p-a2197-00-versal.conf:Add versal Tenzing +SE1 board configurationManjukumar Matha2019-12-092-0/+173
| | | | | | | | | | | | | | | | | Add support to build images for vc-p-a2197-00-versal Tenzing board + SE1 board configuration vck190-versal.conf: Rename vc-e-a2197-00-versal to vck190-versal Rename vc-e-a2197-00-versal machine configuration to vck190-versal with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* ultra96-zynqmp.conf: Include mipi as MACHINE_FEATURESai Hari Chandana Kalluri2019-12-091-1/+1
| | | | | | | | | | Ultra96 provides support for MIPI Interface. To support the interface, additional kernel, device tree modifications are required and must be enabled only when mipi is included as MACHINE_FEATURE Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-firmware_git.bbappend: Add hook for wl18xx and bts fileManjukumar Matha2019-12-091-1/+1
| | | | | | | | | Ultra96 board needs the wl8xx and bts file to enable wireless and bluetooth on the TI part. This recipe uses linux-firmware and modify to include only wl18xx binaries. We also depend on TIInit_11.8.32 bts, add an append to fetch the right bt firmware Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* ultra96-zynqmp.conf: Add support for Ultra96 evaluation boardManjukumar Matha2019-12-091-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Ultra96™ is an Arm-based, Xilinx Zynq UltraScale+™ MPSoC development board based on the Linaro 96Boards specification. The 96Boards’ specifications are open and define a standard board layout for development platforms that can be used by software application, hardware device, kernel, and other system software developers. Ultra96 represents a unique position in the 96Boards community with a wide range of potential peripherals and acceleration engines in the programmable logic that is not available from other offerings More info: http://zedboard.org/product/ultra96 This patch adds machine configuration file for Ultra96 board with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin While using SPL flow, you may need to provide additional hack to pass the PMU config object. This is similar to all ZU+ boards, due to gap in SPL flow unable to load PMU config object. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zcu216-zynqmp: Add support for zcu216 boardSwagath Gadde2019-12-091-0/+38
| | | | | | | | | | | Add machine configuration for zcu216 RFSoC board With required settings for board specific yocto variables needed for compilation of bootloader kernel and device tree -linux-xlnx is kernel provider -u-boot-xlnx is u-boot provider Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* machine-xilinx-default.inc: Adding required dependencies to image_wicJaewon Lee2019-12-091-0/+4
| | | | | | | | | | | | | | | | | Adding base required dependencies to do_image_wic[depends] to make sure the common files required to boot.bin have been deployed in DEPLOYDIR before the do_image_wic task tries to use them. zynqmp/versal will add virtual/kernel, virtual/boot-bin, virtual/bootloader, and virtual/arm-trusted-firmware zynq will add everything but virtual/arm-trusted-firmware If you want to add other files to IMAGE_BOOT_FILES, aside from files deployed from virtual/kernel, virtual/boot-bin, virtual/bootloader, you may need to manually add the dependency to do_image_wic[depends] Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zynq-generic.conf: Add qemu wiring to generic confManjukumar Matha2019-12-091-0/+3
| | | | | | Add qemu wiring to generic conf Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zcu1285-zynqmp.conf: Update UBOOT_MACHINEMukund PVVN2019-12-091-1/+1
| | | | | | | | | uboot config file is renamed from "xilinx_zynqmp_zc1275_revB_defconfig" to "xilinx_zynqmp_zcu1275_revB_defconfig", updated UBOOT_MACHINE to reflect the change Signed-off-by: Mukund PVVN <mukundp@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zcu1275-zynqmp.conf: Rename zc1275 to zcu1275Mukund PVVN2019-12-091-4/+4
| | | | | | | | | zc1275 is renamed to zcu1275. All the references to zc1275 is renamed to zcu1275, this patch addresses machine conf name change and other references to zcu1275 Signed-off-by: Mukund PVVN <mukundp@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* machine-xilinx-default.inc: Add qemu-xilinx-helper-native as preferredManjukumar Matha2019-12-091-0/+3
| | | | | | | | | | | provider Python3 package from OE-core depends on qemu-helper-native, to meet this dependency use qemu-xilinx-helper-native as preferred provider. In addition this helps the sstate-cache to be similar across generic machines and evaluation boards. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zynq/zynqmp confs: Adding boot.scr to IMAGE_BOOT_FILESJaewon Lee2019-12-0910-0/+10
| | | | | | | | Adding boot.scr to IMAGE_BOOT_FILES so boot.scr is included in the wic sd card generation, if wic image generation is enabled Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* u-boot-zynq-scr: reworking boot.scr recipe to work for zynq and zynqmpJaewon Lee2019-12-0914-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | Separating out sample boot.cmd file for the three supported arch (zynq, zynqmp, versal), Updating devicetree, kernel, ramdisk load addresses for zynq, and dynamically setting DEVICE_TREE_NAME to either system.dtb or kernel dtb, depending on if dtg is used or not. This u-boot-zynq-scr implementation is put in to set the default boot and boot quicker than having to wait for the distro_bootcmd to cycle to the correct boot medium. For example, zynq arch has boot_targets set to "mmc mmc0 qspi usb0 pxe dhcp xilinx" and it takes about 30 seconds to try the 'xilinx' target which will run the correct bootargs. To use the boot.scr file, zynqmp boards must have BOOT.bin, Image, system.dtb, and boot.scr in the boot partition and a rootfs extracted in the second partition. Zynq boards must have BOOT.bin, uImage, system.dtb, boot.scr, and uramdisk.image.gz in the boot partition. (uramdisk.image.gz is the ${IMAGE}.cpio.gz.u-boot in deploy directory) Adding u-boot-zynq-scr dependency to all zynq and zynqmp machine confs. Conditionally adding system.dtb to IMAGE_BOOT_FILES for zcu102 to support boot.scr in qemu flow. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* Update recipes for 2019.2 releaseJaewon Lee2019-12-091-1/+2
| | | | | | | | | | | Update u-boot, kernel, ATF, QEMU, pmu-firmware, multimedia recipes for 2019.2 release. The patch also upgrades gcc microblaze, newlib and libgloss versions. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* machine-xilinx-default.inc: Deploy u-boot.elf for Versal devicesManjukumar Matha2019-08-161-0/+1
| | | | | | Deploy u-boot.elf for Versal devices Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* conf/machine/*-zynq7.conf: Fix UBOOT_ELF for upstream u-boot versionManjukumar Matha2019-08-165-0/+5
| | | | | | | | | | | This patch fixes the u-boot issue in do_install | DEBUG: Executing shell function do_install | install: cannot stat 'microzed_zynq7-poky-linux-gnueabi/u-boot/1_2019.01-r0/build/u-boot.elf': No such file or directory Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* layer.conf: Add warning for dangling bbappendsManjukumar Matha2019-08-161-0/+2
| | | | | | | | This layer depends on openembedded-layer for xf86 recipe.Make BitBake throw an warning for situations where an append file (.bbappend) has no corresponding recipe file Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* meta-xilinx-bsp: Update layer compatibility to warrior releaseAlejandro Enedino Hernandez Samaniego2019-08-161-1/+1
| | | | | Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* -generic.conf: Add generic machines for Zynq and ZU+Manjukumar Matha2019-08-152-0/+26
| | | | | | | Add generic machines for Zynq and ZU+. These are used to build sstate-cache and feeds for respective machines Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* microblazeel*.conf: Add microblaze generic machinesManjukumar Matha2019-08-152-0/+34
| | | | | | Add microblaze generic machines to build sstate-cache and package feeds Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zcu1285-zynqmp.conf: Add support for zcu1285 boardSwagath Gadde2019-08-151-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for zcu1285 evaluation board which has the following main features: * XCZU39DR-FFVF1760 * Samtec BullsEye cable access to: * 16 GTY transceivers * 4 GTR transceivers * 16 ADCs * 16 DACs This patch adds machine configuration file for ZCU1285 Evaluation Kit with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin While using SPL flow, you may need to provide additional hack to pass the PMU config object. This is similar to all ZU+ boards, due to gap in SPL flow unable to load PMU config object. Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-06 14:55:32 +0000