summaryrefslogtreecommitdiffstats
path: root/meta-xilinx-bsp/recipes-kernel
Commit message (Collapse)AuthorAgeFilesLines
* kernel-module-hdmi_git.bb: New Yocto recipe for Xilinx HDMI driversManjukumar Matha2019-12-131-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This recipe will pull in the Xilinx HDMI drivers and associated components, for soft IP, to be built as an out-of-tree modules. Following drivers will be pulled-in hdmi-rx (v4l2): The HDMI 1.4/2.0 Receiver Subsystem is a feature-rich soft IP incorporating all the necessary logic to properly interface with PHY layers and provide HDMI decoding functionality. The subsystem is a hierarchical IP that bundles a collection of HDMI RX-related IP sub-cores and outputs them as a single IP. The subsystem receives the captured TMDS data from the video PHY layer. It then extracts the video and audio streams from the HDMI stream and converts it to AXI video and audio streams. It includes support for HDCP 1.4 and 2.2 protocols hdmi-tx (drm): HDMI Tx subsystem is a feature-rich soft IP incorporating all the necessary logic to properly interface with xilinx PHY layers and provide HDMI encoding functionality. The subsystem is a hierarchical IP that bundles a collection of HDMI TX-related IP sub-cores and outputs them as a single IP. The subsystem takes incoming video and audio streams and transfers them to an HDMI stream. The stream is then forwarded to the video PHY layer. It includes support for HDCP 1.4 and 2.2 protocols video-phy (phy): Xilinx Video Phy implements the physical layer for enabling the plug-and-play connectivity with HDMI MAC transmit and receive subsystems. This driver is also used as the repository for common files used by hdmi rx and tx drivers including hdcp1.4 and hdcp2.2 software stack si5324 (ccf): Silicon labs clock generator driver specifically targeting the xilinx hdmi use-case. i.e. implemented only functionality required for xilinx hdmi soft IP at this time. dp159 (ccf): SNxDP159 device is a dual mode display port to TMDS retimer supporting DVI 1.0 and HDMI 1.4b and 2.0 output signals. When working as a retimer, the embedded clock data recovery cleans up the input high frequency and random jitter from video source. It also supports TMDS output amplitude adjust and output slew rate control. Signed-off-by: Rohit Consul <rohit.consul@xilinx.com> Signed-off-by: Shikhar Mishra <shikhar.mishra@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* Update recipes for 2019.2 releaseJaewon Lee2019-12-092-7/+6
| | | | | | | | | | | Update u-boot, kernel, ATF, QEMU, pmu-firmware, multimedia recipes for 2019.2 release. The patch also upgrades gcc microblaze, newlib and libgloss versions. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* Update recipes for Xilinx v2019.1 releaseJaewon Lee2019-08-153-7/+8
| | | | | | | | | | | | | | Update components for 2019.1 release - u-boot-xlnx - linux-xlnx - arm-trusted-firmware - QEMU - recipes-multimedia/vcu - xrt and zocl - pmu-firmware Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* microblaze: Update to v11.0Manjukumar Matha2019-08-151-1/+1
| | | | | | Update kc705-microblazeel to microblaze version v11 Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* Adding FPGA_MNGR_RECONFIG_ENABLE to control enabling fpga managerJaewon Lee2019-06-281-1/+1
| | | | | | | | | | | | | | | Introduce FPGA_MNGR_RECONFIG_ENABLE to enable overlay configuration for fpga-manager support in kernel. To enable, set FPGA_MNGR_RECONFIG_ENABLE = "1" in local.conf or other bitbake configuration files. For backward compatibility, set FPGA_MNGR_RECONFIG_ENABLE based on IMAGE_FEATURES. In future release, the option of fpga-manager in IMAGE_FEATURES will be deprecated. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-xlnx.inc: Use KBUILD_DEFCONFIG in externalsrc mode if definedManjukumar Matha2019-06-281-0/+8
| | | | | | | When external source is used for kernel, we need a starting point for kernel configuration, use KBUILD_DEFCONFIG if it is defined. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-xlnx.inc: Add support to build kernel for versal devicesManjukumar Matha2019-06-281-0/+4
| | | | | | Add support to build kernel for versal devices Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-xlnx.inc: Add support for simpleImageManjukumar Matha2019-01-011-0/+2
| | | | | | Add a new class to enable build simpleImage. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-xlnx.inc: Add required kernel config to enable fpga-managerJaewon Lee2019-01-013-0/+10
| | | | | | | | Enable overlays in kernel if fpga-manager IMAGE_FEATURES is enabled Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-xlnx.inc: Fixing machine override for KERNEL_FEATURESJaewon Lee2019-01-011-1/+1
| | | | | | | | Using a += with machine override will overwrite later append statements. Changing to '_append' to fix this behavior. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* Update recipes for Xilinx v2018.3 releaseManjukumar Matha2019-01-012-7/+7
| | | | | | | Update the arm-trusted-firmware, u-boot-xlnx, linux-xlnx, qemu-xilinx and qemu-devicetrees recipes for 2018.3 release Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* Update recipes for Xilinx v2018.1 releaseManjukumar Matha2018-05-251-0/+7
| | | | | | | | | Update the arm-trusted-firmware, u-boot-xlnx, linux-xlnx, qemu-xilinx and qemu-devicetrees recipes for 2018.1 release Tested-by: Jaewon Lee <jaewon.lee@xilinx.com> Acked-by: Bhargava Sreekantappa Gayathri <bhargava.sreekantappa-gayathri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* Remove 2017.3 component recipesManjukumar Matha2018-05-251-6/+0
| | | | | | Remove 2017.3 based component recipes Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-xlnx: Enable support for Xen modulesManjukumar Matha2018-01-313-0/+50
| | | | | | | If xen is present in distro enable xen modules to be built while building linux-xlnx kernel. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-xlnx.inc: Set compatibility to all MB machinesManjukumar Matha2018-01-311-1/+1
| | | | | | | Make linux-xlnx recipe applicable to all MB machines, remove the restriction of applying it only to kc705 Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* meta-xilinx: Restructuring meta-xilinx to support multiple layersManjukumar Matha2017-12-1330-0/+469
As discussed previously on mailing list, we are proceeding with layer restructuring. For rocko release we will have the following layers meta-xilinx ->meta-xilinx-bsp (current meta-xilinx) ->meta-xilinx-contrib In the subsequent releases we will add other layers from Xilinx meta-xilinx ->meta-xilinx-bsp (current meta-xilinx) ->meta-petalinux ->meta-xilinx-tools ->meta-xilinx-contrib This will provide one clone to get all the required meta layers from Xilinx for a complete solution, and the users can blacklist any layer which they don't want to use using bblayer.conf. This will enables us to help our vendors/partners to add their reference designs, board definitions etc. Recipe changes : * Move reference design zybo-linux-bd.bb to meta-xilinx-contrib * Move kernel patches realted to zybo-linux-bd-zynq7 board to meta-xilinx-contrib * Update README Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-05 02:18:51 +0000