summaryrefslogtreecommitdiffstats
path: root/meta-xilinx-bsp
Commit message (Collapse)AuthorAgeFilesLines
* machine: Remove BOARD overrides from xilinx bsp layerSandeep Gundlupet Raju2023-06-236-24/+0
| | | | | | | | Using BOARD variable are deprecated, hence remove it. Machine conf files using BOARD overrides now will be replaced with machineoverrides. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* README: Update VEK280 HW board device treeSandeep Gundlupet Raju2023-05-171-1/+1
| | | | | Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* vek280-versal: Fix QEMU PLM boot issueSandeep Gundlupet Raju2023-05-171-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QEMU PLM error code are observed as shown below. [21148.520]XPlmi_MaskPoll: Addr: 0xF6D1010C, Mask: 0x1, ExpVal: 0x1, Timeout: 1000000 ...ERROR [21149.542]CMD: 0x00040101 execute failed, Processed Cdo Length 0x468 [21150.294]CMD Payload START, Len:0x00000004 0x00000000F200048C: 0xF6D1010C 0x00000001 0x00000001 0x00001000 0x00000000F2000498: [21151.698]CMD Payload END [21152.876]PLM Error Status: 0x21010001 [21153.347]============Register Dump============ [21153.885]PMC_TAP_IDCODE: 0x00000000 [21154.325]EFUSE_CACHE_IP_DISABLE_0(EXTENDED IDCODE): 0x00000000 [21155.023]PMC_TAP_VERSION: 0x03000000 [21155.450]CRP_BOOT_MODE_USER: 0x00000005 [21155.902]CRP_BOOT_MODE_POR: 0x00000005 [21156.354]CRP_RESET_REASON: 0x00000202 [21156.815]PMC_GLOBAL_PMC_MULTI_BOOT: 0xF0000000 [21157.351]PMC_GLOBAL_PWR_STATUS: 0x00000000 [21157.849]PMC_GLOBAL_PMC_GSW_ERR: 0x00000000 [21158.358]PMC_GLOBAL_PLM_ERR: 0x00000000 [21158.842]PMC_GLOBAL_PMC_ERR1_STATUS: 0x00000000 [21159.409]PMC_GLOBAL_PMC_ERR2_STATUS: 0x00000000 [21159.976]PMC_GLOBAL_GICP0_IRQ_STATUS: 0x20000000 [21160.542]PMC_GLOBAL_GICP1_IRQ_STATUS: 0x00000000 [21161.115]PMC_GLOBAL_GICP2_IRQ_STATUS: 0x00000000 [21161.695]PMC_GLOBAL_GICP3_IRQ_STATUS: 0x00000000 [21162.271]PMC_GLOBAL_GICP4_IRQ_STATUS: 0x00000000 [21162.852]PMC_GLOBAL_GICP_PMC_IRQ_STATUS: 0x00000000 [21163.439]============Register Dump============ This is due to incorrect QEMU_HW_DTB_PS is set for VEK280 machine conf file. 1. Fix QEMU PLM boot issue by setting the right QEMU_HW_DTB_PS to board-versal-ps-vek280.dtb. 2. Update YAML_DT_BOARD_FLAGS to use versal-vek280-revb. 3. Set QB_MEM to 12G as VEK280 board has 12GB memory. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* meta-xilinx-bsp: device-tree: Use EXTRA_OVERLAYS for provencoreMark Hatle2023-05-131-7/+1
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* README.md: Fix Board Device tree for vpk180Sandeep Gundlupet Raju2023-04-121-1/+1
| | | | | Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* meta-xilinx-bsp: kc705-microblazeel: YAML_DT_BOARD_FLAGS for kc705-fullMark Hatle2023-04-111-1/+1
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* README: Update bsp layer langdale release infoSandeep Gundlupet Raju2023-03-151-37/+48
| | | | | | | | 1. Update meta-xilinx-bsp README with langdale release info. 2. Add HDF_MANCHINE info for all eval board machine conf file. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* Remove obsolete 2022 versionsMark Hatle2023-03-051-48/+0
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* meta-xilinx-bsp: Update README on new eval boards infoSandeep Gundlupet Raju2023-02-281-23/+32
| | | | | Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* vhk158-versal: Adjust QB MEM to fix qemu boot issueSandeep Gundlupet Raju2023-01-171-0/+4
| | | | | | | | VHK158 has 32GB memory only but default versal-generic has QB_MEM set to 8G, Since versal-vhk158-reva.dts has 32GB set, we need set same in QB_MEM. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* device-tree: Remove YAML_DT_BOARD_FLAGS from bbappendSandeep Gundlupet Raju2023-01-131-35/+0
| | | | | | | | Remove YAML_DT_BOARD_FLAGS from bbappend as it is moved to board machine conf files. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* zcu670-zynqmp: Add new machine conf file using gen-machineconf toolSandeep Gundlupet Raju2023-01-131-0/+50
| | | | | | | | | 1. Add new zcu670 eval board machine conf file using gen-machineconf tool by parsing respective xsa. 2. Use use soc variant based generic machine inclusion. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* versal: Add new machine conf file using gen-machineconf toolSandeep Gundlupet Raju2023-01-133-0/+144
| | | | | | | | | | | | 1. Add new versal eval board machine conf file using gen-machineconf tool by parsing respective xsa. - vhk158-versal - vpk120-versal - vpk180-versal 2. Use use soc variant based generic machine inclusion. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* microblazeel: Update machine conf file using gen-machineconf toolSandeep Gundlupet Raju2023-01-134-28/+92
| | | | | | | | | | | | | | 1. Update below microblazeel eval board machine conf file using gen-machineconf tool by parsing respective xsa. - ac701-microblazeel - kc705-microblazeel - kcu105-microblazeel - vcu118-microblazeel 2. Move variables which changes based on xsa before required inclusion file to handle pre-expansion values. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* versal: Update machine conf file using gen-machineconf toolSandeep Gundlupet Raju2023-01-133-16/+133
| | | | | | | | | | | | | | 1. Update below versal eval board machine conf file using gen-machineconf tool by parsing respective xsa. - vck190-versal - vck5000-versal - vmk180-versal 2. Move variables which changes based on xsa before required inclusion file to handle pre-expansion values. 3. Use use soc variant based generic machine inclusion. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* zynqmp: Update machine conf file using gen-machineconf toolSandeep Gundlupet Raju2023-01-138-52/+387
| | | | | | | | | | | | | | | | | | | | | 1. Update below zynqmp eval board machine conf file using gen-machineconf tool by parsing respective xsa. - zcu102-zynqmp - zcu104-zynqmp - zcu106-zynqmp - zcu111-zynqmp - zcu1275-zynqmp - zcu1285-zynqmp - zcu208-zynqmp - zcu216-zynqmp 2. Move variables which changes based on xsa before required inclusion file to handle pre-expansion values. 3. Disable U-boot SPL boot and kernel device tree by default. User has to set explicitly to use it. 4. Use use soc variant based generic machine inclusion Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* zynq7: Update machine conf file using gen-machineconf toolSandeep Gundlupet Raju2023-01-132-37/+73
| | | | | | | | | | | 1. Update zc702 and zc706 machine conf file using gen-machineconf tool by parsing zc702 and zc706 xsa. 2. Move variables which changes based on xsa before required inclusion file to handle pre-expansion values. 3. Remove BOARD MACHINEOVERRIDES in conf file. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* vek280-versal: Update machine conf fileSandeep Gundlupet Raju2023-01-061-20/+12
| | | | | | | | | | 1. Move variables which changes based on xsa before required inclusion file to handle pre-expansion values. 2. Remove duplicate entries of variables as it is already set in versal-generic.conf file. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* vek280-versal: Add new machine conf file for VEK280 boardSandeep Gundlupet Raju2022-12-081-0/+43
| | | | | | | | Add new machine conf file for VEK280 evaluation board. This machine conf file is generated using gen-machine-conf tool. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* meta-xilinx-standalone: Update 2023.1 embeddedsw and git versionMark Hatle2022-12-081-4/+8
| | | | | | | | | | Update the integration to match 2023 changes. Update the Makefile and versal pathes for 2023 specific version Add a workaround for -Werror -Wnull-dereference failing during some compiles Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* zc706-zynq7.conf: Rename u-boot scripts and uenv packagesSandeep Gundlupet Raju2022-12-021-4/+1
| | | | | | | | | | | In meta-xilinx-core u-boot-zynq-scr and u-boot-zynq-uenv recipes are renamed to u-boot-xlnx-scr and u-boot-xlnx-uenv. Hence change these in all the configuration files. Also move common EXTRA_IMAGEDEPENDS to zynq-generic.conf files. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* linux-xlnx-dev: Move kria definition to meta-kriaMark Hatle2022-11-251-3/+0
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* linux-xlnx: Move kria definition to meta-kriaMark Hatle2022-11-251-2/+0
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* u-boot: Add u-boot configs for kc705 boardSandeep Gundlupet Raju2022-11-242-0/+44
| | | | | Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* linux-xlnx: Add kernel metadata for evaluation boardSandeep Gundlupet Raju2022-11-245-2/+59
| | | | | | | | | 1. Add kernel metadata for ac701 and vcu118 evaluation board. 2. Add kernel fragments and series configuration compiler(.scc) files for ac701 and vcu118 boards. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* ac701-microblazeel: Add new machine conf file for AC701 boardSandeep Gundlupet Raju2022-11-241-0/+34
| | | | | Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* vcu118-microblazeel: Add new machine conf file for VCU118 boardSandeep Gundlupet Raju2022-11-241-0/+34
| | | | | Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* kcu105-microblazeel: Add new machine conf file for KCU105 boardSandeep Gundlupet Raju2022-11-241-0/+34
| | | | | Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* Rename Kria MACHINEOVERRIDEJohn Toomey2022-11-243-4/+4
| | | | | | | :k26 has been replaced with :kria and :k26-sm{,k} Signed-off-by: John Toomey <john.toomey@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* meta-xilinx-bsp: recipes-bsp: embeddedsw: fsbl-firmware: Fix compilation ↵Appana Durga Kedareswara rao2022-11-211-2/+6
| | | | | | | | | error in system device-tree flow Update checks for system device-tree flow. Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* device-tree.bbappend: Remove vck-sc and vpk-sc board dtsiSandeep Gundlupet Raju2022-11-151-2/+0
| | | | | Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* machine: Remove vck-sc-zynqmp machine confSandeep Gundlupet Raju2022-11-151-10/+0
| | | | | | | Remove vck-sc-zynqmp machine conf file from meta-xilinx-bsp layer. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* embeddedsw:add the pmu-conf extraction from fsblSwagath Gadde2022-10-211-0/+12
| | | | | | | | QEMU for all zynqmp platforms requires pmu-conf from fsbl binary section. Signed-off-by: Swagath Gadde <swagath.gadde@amd.com> Signed-off-by: Shubhangi Mahalle <shubhangi.shrikrushna-mahalle@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* Merge branch 'kirkstone-next'Mark Hatle2022-09-137-551/+53
|\ | | | | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
| * Merge branch 'honister' into kirkstone-nextMark Hatle2022-09-127-551/+53
| |\ | | | | | | | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
| | * User can now set XILINX_RELEASE_VERSION to either 'v2022.1' or 'v2022.2'Mark Hatle2022-09-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will in-turn select the preferred version for various components to match a given release. It is advise that the user use the latest version whenever possible, but if they are stuck on an older version of Vivado they may need to select the older release. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
| | * Merge remote-tracking branch 'origin/rel-v2022.2' into honisterMark Hatle2022-09-016-551/+51
| | |\
| | | * device-tree: Remove kc705 static dts filesSandeep Gundlupet Raju2022-08-304-550/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Obsolete kc705 static device tree files and use DTG generated one based on xsa parsing. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
| | | * device-tree.bbappend:wire vek280 board dtsSwagath Gadde2022-08-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch will wire the vek280 board dts wrt yocto MACHINEOVERRIDES. Signed-off-by: Swagath Gadde <swagath.gadde@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
| | | * device-tree.bbappend:wire vpk180 and vhk158 board dtsSwagath Gadde2022-06-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch will wire the vpk180 and vhk158 board dts wrt yocto MACHINEOVERRIDES. Signed-off-by: Swagath Gadde <swagath.gadde@amd.com> Signed-off-by: Mark Hatle <mhatle@xilinx.com>
| | | * uboot-device-tree: Move bbappend into meta-xilinx-toolsMark Hatle2022-06-132-22/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The provencore bbappend only applied when meta-xilinx-tools is available, so move the bbappend to meta-xilinux-tools. Signed-off-by: Mark Hatle <mhatle@xilinx.com>
| | | * meta-xilinx: Move booting README from bsp layerSandeep Gundlupet Raju2022-05-101-266/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move README.booting.md file from meta-xilinx-bsp layer to meta-xilinx. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@xilinx.com> Signed-off-by: Mark Hatle <mhatle@xilinx.com>
| | | * meta-xilinx: Clean up vendor specific machine configuration filesSandeep Gundlupet Raju2022-05-1023-14222/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add new metal-xilinx-vendor layer which supports vendor specific machine configuration files, device-tree, kernel, platform-init etc. 2. Moved below vendor machine conf files, dt and related configs from meta-xilinx-bsp and meta-xilinx-contrib to meta-xilinx-vendor layer. - microzed-zynq7.conf - minized-zynq7.conf - picozed-zynq7.conf - zedboard-zynq7.conf - zybo-zynq7.conf - zybo-linux-bd-zynq7.conf - ultra96-zynqmp.conf 3. Obsolete qemu-zynq7, s3adsp1800-qemu-microblazeeb, v350-versal and vc-p-a2197-00-versal from meta-xilinx-bsp layer. Users should use zynq-generic.conf for zynq7000 qemu boot should be functionally equivalent to qemu-zynq7. 4. Add new MAINTAINERS.md file and move maintainers, Mailing list and Patches content from meta-xilinx-* README.md to MAINTAINERS.md file. 5. Updated README.md file for supported board machines files in meta-xilinx-bsp, meta-xilinx-contrib and meta-xilinx-vendor layers. 6. Disabled old drm kernel patches for zybo-linux-bd-zynq mahcine in meta-xilinx-contrib layer as these patches doesn't apply on 5.x kernel, if we don't hear from patch submitter we will remove these patches from meta-xilinx-contrib layer. 7. Removed drm kernel cache metadate for zybo-linux-bd-zynq7 machine as these configs are already available in xilinx_zynq_defconfig. 8. Fixed build issue for u-boot by changing PREFERRED_PROVIDER_virtual/bootloader from u-boot to u-boot-xlnx. 9. Add meta-xilinx-vendor to bblayers.conf.sample Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@xilinx.com> Signed-off-by: Mark Hatle <mhatle@xilinx.com>
| | | * meta-xilinx-bsp:uboot-device-tree: provencore memory reservationAkshay Belsare2022-05-042-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provencore Linux driver and testapp is enabled through MACHINE_FEATURES. When provencore is enabled, reserve memory required for provencore through uboot device tree. This patch adds pnc.dtsi to system-top.dts file when provencore is enabled. pnc.dtsi contains the memory address and memory size that needs to be reserved. Signed-off-by: Akshay Belsare <Akshay.Belsare@xilinx.com> Signed-off-by: Mark Hatle <mhatle@xilinx.com>
| | | * meta-xilinx-bsp:device-tree: provencore memory reservationAkshay Belsare2022-05-042-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provencore Linux driver and testapp is enabled through MACHINE_FEATURES. When provencore is enabled, reserve memory required for provencore through device tree. This patch adds pnc.dtsi to system-top.dts file when provencore is enabled. pnc.dtsi contains the memory address and memory size that needs to be reserved. Signed-off-by: Akshay Belsare <Akshay.Belsare@xilinx.com> Signed-off-by: Mark Hatle <mhatle@xilinx.com>
| | | * recipes-kernel: linux: add auto load support for usb2244 driverPiyush Mehta2022-03-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds usb2244 (USB-SD) autoload module support for the kr260 board. Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
| | | * pmu-firmware_%.bbappend: Move k26 configuration to meta-somVikram Sreenivasa Batchali2022-03-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Vikram Sreenivasa Batchali <b.vikram@xilinx.com> Remove the k26 configuration. New configuration in meta-som. Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
| | | * device-tree: Remove ultra96 mipi device tree filesChristian Kohn2022-03-101-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ultra96 harwdare design is updated to not include mipi anymore. Remove the corresponding SRC_URI and do_configure appends. Signed-off-by: Christian Kohn <christian.kohn@xilinx.com> Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
| | | * pmu-firmware_%.bbappend:enable build flags for dynamic MIO configuration.Swagath Gadde2022-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch will enable the below pmufw build flags to support dynamic MIO configuration. which is required for SOM use case. ENABLE_IOCTL ENABLE_DYNAMIC_MIO_CONFIG Signed-off-by: Swagath Gadde <swagath.gadde@xilinx.com> Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
| | | * various: Move from 2022.1 to 2022.2Mark Hatle2022-02-051-0/+0
| | | | | | | | | | | | | | | | Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-06 01:42:13 +0000