summaryrefslogtreecommitdiffstats
path: root/meta-xilinx-bsp
Commit message (Collapse)AuthorAgeFilesLines
...
* Using tune-cortexa72-cortexa53.inc for versal and zynqmp tunesJaewon Lee2020-01-222-4/+4
| | | | | | | | | | | Using the optimized tune file (tune-cortexa72-cortexa53.inc) instead of armv8a tune for versal and zynqmp. Also changing DEFAULTTUNE from aarch64 to cortexa72-cortexa53 as otherwise it was taking aarch64, the first declared default Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
* Revert "Revert "**TEMPORARY**: Removing preferred provider overrides for ↵Sai Hari Chandana Kalluri2020-01-221-6/+6
| | | | | | | mali backend"" This reverts commit 7719c87e2574a6ed2b15b99c43ecbee5cebb3b69. Removing libmali as preferred provider due to CR-1052821
* microblaze gdb/binutils: Adding necessary patches for microblazeJaewon Lee2020-01-2091-360/+14419
| | | | | | | | | Binutils and GDB updated to include common commits. These commits were syncronized between binutils and gdb sources, and then equally applied as microblaze specific bbappends. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
* gdb: Switching microblaze to use upstream gdb version 8.3.1Jaewon Lee2020-01-2020-2495/+0
| | | | | | | | Previously we were using gdb 7.7.1 just for microblaze for compatibility issues, now switching back to upstream version 8.3.1 and removing no longer needed 7.7.1 bb files and patches Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
* gcc-source: Adding microblaze patch to fix compiler crash with ↵Jaewon Lee2020-01-152-0/+78
| | | | | | | | | | | -freg-struct-return Adding microblaze specific patch to fix a bug in MB GCC regarding the passing struct values in registers. Currently we are only handling SImode With this patch all other modes are handled properly Signed-off-by: Nagaraju Mekala <nmekala@xilix.com> Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
* "**TEMPORARY**" linux-xlnx.inc: Trim PV variable expansionSai Hari Chandana Kalluri2020-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | PV variable is set to expand as PV = "${LINUX_VERSION}${LINUX_VERSION_EXTENSION}+git${SRCPV}" where: XILINX_RELEASE_VERSION ?= "" LINUX_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}" During package compilation, the sstatecache generates a siginfo filename using the packagename, PV, machine arch and SRCPV. For microblaze machines i.e microblazeel-v11.0-bs-cmp-mh-div-generic and microblazeel-v11.0-bs-cmp-ml-generic, when signinfo file is generated it fails with the following error: OSError: [Errno 36] File name too long: 'yocto/2020.1/2020.1-next/build/sstate-cache/bd/sigtask.v21dhivl' -> 'yocto/2020.1/2020.1-next/build/sstate-cache/bd/sstate:linux-xlnx:microblazeel_v11.0_bs_cmp_ml_generic-xilinx-linux:4.19-xilinx-v2020.1+gitAUTOINC+3120d3694a:r0:microblazeel_v11.0_bs_cmp_ml_generic:3:bd73041379cd33962d98eb44c1b73f20f24daf3ace4a4ddc605548dc63e7f62d_kernel_version_sanity_check.tgz.siginfo' To fix the error, trim the PV variable by removing the LINUX_VERSION_EXTENSION to get PV = "${LINUX_VERSION}+git${SRCPV}" Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* Update XILINX_RELEASE_VERSION to v2020.1Varalaxmi Bingi2020-01-131-1/+1
| | | | | | | Update XILINX_RELEASE_VERSION to v2020.1 Signed-off-by: Varalaxmi Bingi <varalaxmi.bingi@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* libgpg-error: Add microblaze platform specific gpg-error.h fileManjukumar Matha2020-01-062-0/+31
| | | | | | | | | | Add support for microblaze by generating the platform specific gpg-error.h file. This was generated based on a patch from Nathan Rossi, using qemu_wrapper_cmdline, more detials on patch can be found here https://github.com/nathanrossi/meta-xilinx/commit/107f4564041c64a68bb3250f4c5f96bd9d257aaf Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* layer.conf: Update XILINX_RELEASE_VERSION to v2020.1Manjukumar Matha2020-01-061-1/+1
| | | | | | Update XILINX_RELEASE_VERSION to v2020.1 Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* kc705-microblaze: Update u-boot patch for kc705Manjukumar Matha2020-01-061-15/+19
| | | | | | Update u-boot patch for kc705 Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* u-boot-zynq-scr:Add initrd label to pxe configSwagath Gadde2019-12-172-0/+2
| | | | | | | | | | | | This patch adds the initrd label command to pxe config file which is required to boot linux in pxeboot with initrd image. initrd <path> - if this label is chosen, use tftp to retrieve the initrd at <path>. it will be stored at the address indicated in the initrd_addr_r environment variable, and that address will be passed to bootm Signed-off-by: Swagath Gadde <swagathg@xilinx.com>
* arm-trusted-firmware.inc: Changing generic DEBUG to DEBUG_ATFJaewon Lee2019-12-171-4/+4
| | | | | | Changing generic 'DEBUG' flag to 'DEBUG_ATF' for better readability. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
* libmali-xlnx: Provide single shlib provider for libMali.so.9Sai Hari Chandana Kalluri2019-12-161-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libmali-xlnx provides multiple shared libraries to support the update alternatives mechanism. For this, shared libraries with different backends are installed to the target and softlinked to libmali-xlnx.so. When do_package task runs, 1. It creates a pkgdata/libmali-xlnx file that generates a list of packages. In this case: PACKAGES: libmali-xlnx-src libmali-xlnx-dbg libmali-xlnx-staticdev libmali-xlnx-dev libmali-xlnx-doc libmali-xlnx-locale libmali-xlnx libmali-xlnx-x11 libmali-xlnx-fbdev libmali-xlnx-wayland libmali-xlnx-headless 2. It also tries to identify what are the shlibs files and creates a pkgdata/shlibs2/libmali-xlnx.list file. - The .list file contains a list of all shared object files being provided by a package. - This list is created by looking at list of packages from above one by one. - It creates a list of available .so files for target os and then uses objdump -p to get more info(NEEDED and SONAME) about the object files - Writes to .list file with list of .so files and the paths installed. - This is generated by only looking at the .so files in each package and not the defaiult backend being used in the recipe. In Zeus, with this commit f7d46843e93f1acb4872bd5bcc12ed734de5168b on package.bbclass, multiple shlib_providers for the same file error. Hence when packages like cairo, qtbase build they error out with the following error: Multiple shlib providers for libMali.so.9: libmali-xlnx, libmali-xlnx,libmali-xlnx, libmali-xlnx Why this error generates for packages using libmali-xlnx: When cairo/qtbase packages run do_package task, bitbake generates a shlibs_provider_map list containing information (soname,ldir,ver) for the given package using shlibs2/*.list files copied to pkgdata-sysroots. libmali-xlnx.list contains list of all .so files installed inspite default MALI_BACKEND_DEFAULT provider. Since the shlibs_provider_map contains more than one provider, bitbake generates the above error and fails. To fix the above issue, append to the do_package task to update the libmali-xlnx.list to specify only the MALI_BACKEND_DEFAULT provider shlib and discard the remaining unused shlibs. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
* Revert "**TEMPORARY**: Removing preferred provider overrides for mali backend"Jaewon Lee2019-12-161-6/+6
| | | | This reverts commit 03115b3c35560617b2ffa9e911a6c1071ff6ad30.
* glibc-locale_%.bbappend: Fix directory installed but not shipped issueJaewon Lee2019-12-121-0/+4
| | | | | | | | | | Fixing "Files/directories were installed but not shipped in any package" issue where /usr/lib/locale directory was being populated with no files included. Appeding a loop to delete empty directories in libdir to bypass this issue Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* meson: Adding patch to add microblaze as supported CPUJaewon Lee2019-12-122-0/+29
| | | | | | Adding patch to add microblaze as supported CPU Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
* **TEMPORARY**: Removing preferred provider overrides for mali backendJaewon Lee2019-12-091-6/+6
| | | | | | | | | | | | | | Temporarily removing preferred provider overrides for mali backed to bypass mali packaging issues for ex: Multiple shlib providers for libMali.so.9 QA Issue: /usr/lib/libQt5EglFSDeviceIntegration.so.5.13.2 contained in package qtbase requires libMali.so.9()(64bit), but no providers found in RDEPENDS_qtbase? [file-rdeps] Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
* Upgrade recipes to 2020.1Sai Hari Chandana Kalluri2019-12-099-0/+0
| | | | | | Upgrade u-boot, qemu, linux, atf to 2020.1 Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* qemu-*: Upgrade QEMU version 2.11 -> 4.1.5Sai Hari Chandana Kalluri2019-12-097-180/+15
| | | | | | Upgrade QEMU version from 2.11 -> 4.1.5 for 2020.1 release Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* tune-versal.inc: Rename include file from arch-armv8 to arch-armv8aSai Hari Chandana Kalluri2019-12-091-1/+1
| | | | | | Rename include file from arch-armv8.inc -> arch-armv8a.inc Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* vck190-versal.conf: Add deploy dir for psm and plm firmwareSai Hari Chandana Kalluri2019-12-091-0/+3
| | | | | | Add deploy dir path for plm and psm to support multiconfig builds. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* plm_2019.2.bb: recipe to build plm standaloneSai Hari Chandana Kalluri2019-12-091-0/+3
| | | | | | | | Add recipe to build plm as standalone component. plm is platform loader and manager for versal devices.It performs boot and configuration of the Versal ACAP device. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* u-boot-xlnx: Add the platform init file for zcu216-zynqmpSai Hari Chandana Kalluri2019-12-091-0/+1
| | | | | | | Add u-boot-xlnx platform init file for zcu216-zynqmp machine Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* arm-trusted-firmware_2019.2.bbappend: Update compilation flagSai Hari Chandana Kalluri2019-12-091-0/+1
| | | | | | | | | This patch updates compilation flag for versal silicon. This flag is only needed for s80 device. Signed-off-by: Vineeth Chowdary <vineeth.chowdary@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* tune-versal.inc: Set default SOC_VARIANT = s80Sai Hari Chandana Kalluri2019-12-091-1/+1
| | | | | | Set default SOC_VARIANT for all versal machines as s80. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
* vmk180-versal.conf: Add machine configuration for vmk180-versalSai Hari Chandana Kalluri2019-12-091-0/+37
| | | | | | | | | | | | Add machine configuration for vmk180-versal with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* v350-versal.conf: Enforce system.dtb name when using virtual/dtbSai Hari Chandana Kalluri2019-12-091-1/+1
| | | | | | | | Only if user uses virtual/dtb enforce system.dtb name as u-boot looks for system.dtb. Else user can specify a dtb with any name. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* vck-sc-zynqmp: Machine configuration for vck190 system controllerSai Hari Chandana Kalluri2019-12-091-0/+39
| | | | | | | | | | | Add machine configuration vck-sc-zynqmp for vck190 system controller with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* v350-versal.conf:Add versal board configurationMukund PVVN2019-12-091-0/+36
| | | | | | | | Add support to build images for v350-versal board configuration. V350 is a PCIe based card which has s80 Versal part. Signed-off-by: Mukund PVVN <mukundp@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* vc-p-a2197-00-versal.conf:Add versal Tenzing +SE1 board configurationManjukumar Matha2019-12-093-0/+175
| | | | | | | | | | | | | | | | | Add support to build images for vc-p-a2197-00-versal Tenzing board + SE1 board configuration vck190-versal.conf: Rename vc-e-a2197-00-versal to vck190-versal Rename vc-e-a2197-00-versal machine configuration to vck190-versal with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-xlnx.inc: Add MIPI kernel configuration for Ultra96Sai Hari Chandana Kalluri2019-12-093-0/+133
| | | | | | | Add MIPI kernel configuration for Ultra96 Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* ultra96-zynqmp.conf: Include mipi as MACHINE_FEATURESai Hari Chandana Kalluri2019-12-091-1/+1
| | | | | | | | | | Ultra96 provides support for MIPI Interface. To support the interface, additional kernel, device tree modifications are required and must be enabled only when mipi is included as MACHINE_FEATURE Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* linux-firmware_git.bbappend: Add hook for wl18xx and bts fileManjukumar Matha2019-12-092-1/+29
| | | | | | | | | Ultra96 board needs the wl8xx and bts file to enable wireless and bluetooth on the TI part. This recipe uses linux-firmware and modify to include only wl18xx binaries. We also depend on TIInit_11.8.32 bts, add an append to fetch the right bt firmware Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* ultra96-zynqmp.conf: Add support for Ultra96 evaluation boardManjukumar Matha2019-12-091-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Ultra96™ is an Arm-based, Xilinx Zynq UltraScale+™ MPSoC development board based on the Linaro 96Boards specification. The 96Boards’ specifications are open and define a standard board layout for development platforms that can be used by software application, hardware device, kernel, and other system software developers. Ultra96 represents a unique position in the 96Boards community with a wide range of potential peripherals and acceleration engines in the programmable logic that is not available from other offerings More info: http://zedboard.org/product/ultra96 This patch adds machine configuration file for Ultra96 board with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin While using SPL flow, you may need to provide additional hack to pass the PMU config object. This is similar to all ZU+ boards, due to gap in SPL flow unable to load PMU config object. Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zcu216-zynqmp: Add support for zcu216 boardSwagath Gadde2019-12-091-0/+38
| | | | | | | | | | | Add machine configuration for zcu216 RFSoC board With required settings for board specific yocto variables needed for compilation of bootloader kernel and device tree -linux-xlnx is kernel provider -u-boot-xlnx is u-boot provider Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* image-types-xilinx-qemu.bbclass: Add sector size as 512KManjukumar Matha2019-12-091-3/+3
| | | | | | | Add sector size as 512K for larger SD, this is according to specifications Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* machine-xilinx-default.inc: Adding required dependencies to image_wicJaewon Lee2019-12-091-0/+4
| | | | | | | | | | | | | | | | | Adding base required dependencies to do_image_wic[depends] to make sure the common files required to boot.bin have been deployed in DEPLOYDIR before the do_image_wic task tries to use them. zynqmp/versal will add virtual/kernel, virtual/boot-bin, virtual/bootloader, and virtual/arm-trusted-firmware zynq will add everything but virtual/arm-trusted-firmware If you want to add other files to IMAGE_BOOT_FILES, aside from files deployed from virtual/kernel, virtual/boot-bin, virtual/bootloader, you may need to manually add the dependency to do_image_wic[depends] Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* run-postinsts: Pass the output of the scripts run to kmsgAlejandro Enedino Hernandez Samaniego2019-12-091-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | The run-postinsts scripts are meant to run during the first boot of the device. At boot time, though, some resources are not available(e.g. STDOUT), hence why applications that run at this point need to be correctly daemonized, if, for some reason a script that runs is not able to start as a daemon, proper behavior cannot be guaranteed. For some unknown reason to me at this point, the console behaves differenly on our devices depending on the chosen boot mode, for example, when using sdboot, scripts that echo something during boot show the messages properly on the boot log, but when using jtag as boot mode, this does not happen and the messages are not shown. One of such cases happens with update-alternatives, which expects STDOUT to be present, and if it fails to get a possible output file descriptor it exits ungracefully, causing the run-postinsts script to exit itself. Pass the the kmsg character device as the output for the scripts run by the run-postinsts script, not only to be able to print out the output of such script to the boot log, but also to pass a valid file descriptor to the scripts so they behave properly. Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
* flashstrip utility: Build and ship flash strip utility needed for qemuJaewon Lee2019-12-092-0/+201
| | | | | | | | | | | | | | | | | | | Building and shipping flash strip utility needed for qemu: flash_strip flash_strip_bw flash_unstrip flash_unstrip_bw From the QEMU flash strip utilities wiki: QSPI Controllers implement byte/bit strip logic. Which mean's when an image is flashed, its stripped bit/byte wise into two flashes. User can use u-boot or Linux apps to flash the image after boot. By using flash strip utilities, we can flash the image without using u-boot. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* bootgen_1.0.bb: Adding initial bootgen recipe to build bootgenJaewon Lee2019-12-091-0/+31
| | | | | | | | | | | | Building and installing bootgen, a tool that lets you stitch binary files together and generate device boot images. native and nativesdk classes are inherited as well to allow native version of bootgen to be built and to allow packaging of bootgen into an sdk if added into the dependency. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zynq-generic.conf: Add qemu wiring to generic confManjukumar Matha2019-12-091-0/+3
| | | | | | Add qemu wiring to generic conf Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zcu1285-zynqmp.conf: Update UBOOT_MACHINEMukund PVVN2019-12-091-1/+1
| | | | | | | | | uboot config file is renamed from "xilinx_zynqmp_zc1275_revB_defconfig" to "xilinx_zynqmp_zcu1275_revB_defconfig", updated UBOOT_MACHINE to reflect the change Signed-off-by: Mukund PVVN <mukundp@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zcu1275-zynqmp.conf: Rename zc1275 to zcu1275Mukund PVVN2019-12-091-4/+4
| | | | | | | | | zc1275 is renamed to zcu1275. All the references to zc1275 is renamed to zcu1275, this patch addresses machine conf name change and other references to zcu1275 Signed-off-by: Mukund PVVN <mukundp@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* machine-xilinx-default.inc: Add qemu-xilinx-helper-native as preferredManjukumar Matha2019-12-091-0/+3
| | | | | | | | | | | provider Python3 package from OE-core depends on qemu-helper-native, to meet this dependency use qemu-xilinx-helper-native as preferred provider. In addition this helps the sstate-cache to be similar across generic machines and evaluation boards. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* zynq/zynqmp confs: Adding boot.scr to IMAGE_BOOT_FILESJaewon Lee2019-12-0910-0/+10
| | | | | | | | Adding boot.scr to IMAGE_BOOT_FILES so boot.scr is included in the wic sd card generation, if wic image generation is enabled Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* u-boot-zynq-scr: Setting sd as default bootmode for versalJaewon Lee2019-12-091-0/+4
| | | | | | | | | Setting sd as default bootmode for versal and adding default boot.scr for versal. NOTE: the difference between zynqmp and versal boot.scr template is versal doesn't have 'earlycon' Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* u-boot-zynq-scr: reworking boot.scr recipe to work for zynq and zynqmpJaewon Lee2019-12-0916-7/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | Separating out sample boot.cmd file for the three supported arch (zynq, zynqmp, versal), Updating devicetree, kernel, ramdisk load addresses for zynq, and dynamically setting DEVICE_TREE_NAME to either system.dtb or kernel dtb, depending on if dtg is used or not. This u-boot-zynq-scr implementation is put in to set the default boot and boot quicker than having to wait for the distro_bootcmd to cycle to the correct boot medium. For example, zynq arch has boot_targets set to "mmc mmc0 qspi usb0 pxe dhcp xilinx" and it takes about 30 seconds to try the 'xilinx' target which will run the correct bootargs. To use the boot.scr file, zynqmp boards must have BOOT.bin, Image, system.dtb, and boot.scr in the boot partition and a rootfs extracted in the second partition. Zynq boards must have BOOT.bin, uImage, system.dtb, boot.scr, and uramdisk.image.gz in the boot partition. (uramdisk.image.gz is the ${IMAGE}.cpio.gz.u-boot in deploy directory) Adding u-boot-zynq-scr dependency to all zynq and zynqmp machine confs. Conditionally adding system.dtb to IMAGE_BOOT_FILES for zcu102 to support boot.scr in qemu flow. Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* u-boot-zynq-scr: Add pxeboot support in u-boot-scrSwagath Gadde2019-12-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds pxeboot support for versal platform by adding default config file in pxelinux.cfg directory with below minimal mandatory information forbooting. label <name> - begin a label definition. labels continue until a command not recognized as a label command is seen, or EOF is reached. kernel <path> - if this label is chosen, use tftp to retrieve the kernel at <path>. it will be stored at the address indicated in the kernel_addr_r environment variable, and that address will be passed to bootm to boot this kernel. fdt <path> - if this label is chosen, it will load dtb at fdt_addr and that location of a fdt_addr will be passed to bootm when booting a kernel. Generally after u-boot bootup in jtag mode after autoboot time it scans usb and then ethernet and checks for pxelinux.cfg directory with default config file, if found it will load and boot linux. Steps to test: 1.acquire the board 2.in systest point the tftpd <path> 3.open serial terminal and connect com0 4.load the pdi from xsdb 5.stop at uboot promt and set serverip 6.dhcp 7.pxe get 8.pxe boot Signed-off-by: Swagath Gadde <swagathg@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* u-boot-xlnx_2019.2.bb: Rename zc1275 to zcu1275 board nameSai Hari Chandana Kalluri2019-12-091-2/+2
| | | | | | | | | | The zc1275-zynqmp board name is renamed to zcu1275-zynqmp. All references in u-boot repository have been modified to zcu1275 from zc1275. This patch updates the uboot platform init to use the zcu1275 name change Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
* kernel-module-hdmi_git.bb: New Yocto recipe for Xilinx HDMI driversManjukumar Matha2019-12-091-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This recipe will pull in the Xilinx HDMI drivers and associated components, for soft IP, to be built as an out-of-tree modules. Following drivers will be pulled-in hdmi-rx (v4l2): The HDMI 1.4/2.0 Receiver Subsystem is a feature-rich soft IP incorporating all the necessary logic to properly interface with PHY layers and provide HDMI decoding functionality. The subsystem is a hierarchical IP that bundles a collection of HDMI RX-related IP sub-cores and outputs them as a single IP. The subsystem receives the captured TMDS data from the video PHY layer. It then extracts the video and audio streams from the HDMI stream and converts it to AXI video and audio streams. It includes support for HDCP 1.4 and 2.2 protocols hdmi-tx (drm): HDMI Tx subsystem is a feature-rich soft IP incorporating all the necessary logic to properly interface with xilinx PHY layers and provide HDMI encoding functionality. The subsystem is a hierarchical IP that bundles a collection of HDMI TX-related IP sub-cores and outputs them as a single IP. The subsystem takes incoming video and audio streams and transfers them to an HDMI stream. The stream is then forwarded to the video PHY layer. It includes support for HDCP 1.4 and 2.2 protocols video-phy (phy): Xilinx Video Phy implements the physical layer for enabling the plug-and-play connectivity with HDMI MAC transmit and receive subsystems. This driver is also used as the repository for common files used by hdmi rx and tx drivers including hdcp1.4 and hdcp2.2 software stack si5324 (ccf): Silicon labs clock generator driver specifically targeting the xilinx hdmi use-case. i.e. implemented only functionality required for xilinx hdmi soft IP at this time. dp159 (ccf): SNxDP159 device is a dual mode display port to TMDS retimer supporting DVI 1.0 and HDMI 1.4b and 2.0 output signals. When working as a retimer, the embedded clock data recovery cleans up the input high frequency and random jitter from video source. It also supports TMDS output amplitude adjust and output slew rate control. Signed-off-by: Rohit Consul <rohit.consul@xilinx.com> Signed-off-by: Shikhar Mishra <shikhar.mishra@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-05 09:51:41 +0000