summaryrefslogtreecommitdiffstats
path: root/meta-xilinx-core
Commit message (Collapse)AuthorAgeFilesLines
* meta-xilinx-core: Move generic machines to be firmware-lessMark Hatle2024-09-137-102/+0
| | | | | | | | | | | | | Generic machines no longer depend on firmware (ESW) components. Thus they will now build a full Linux system, where possible, without XSCT or SDT modes. It is up to the specific machine.conf files to enable the correct build flow and that will enable the necessary firmware dependencies for the SoC. This also means HDF_MACHINES is no longer required. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* machine-xilinx-qemu.inc: Set weak assignment for QB_XILINX_SERIALSandeep Gundlupet Raju2024-09-131-1/+1
| | | | | | | | | | | | Zynq-7000 SDT and XSCT runqemu doesn't come up due to conditional assignment in both machine-xilinx-qemu.inc and zynq-generic.conf file. With that said the value set in machine-xilinx-qemu.inc will be used during pre-expansion value. To fix this issue set weak assignment for QB_XILINX_SERIAL so that variable can be override from machine conf file or local.conf. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* u-boot-xlnx : Updated SRCREV for 2024.2_8499Sivaprasad Addepalli2024-09-131-1/+1
| | | | | arm64: versal-net: Add xilsem edac node xilinx: zynqmp: Add bootmenu support
* linux-xlnx : Updated SRCREV for 2024.2_9695Sivaprasad Addepalli2024-09-111-1/+1
| | | | | | iio: adc: versal-sysmon: Redefine HBM temperature channel iio: adc: versal-sysmon: Adds oversampling/averaging feature sets iio: adc: versal-sysmon: Macro definition change for reusability
* u-boot-xlnx : Updated SRCREV for 2024.2_5175Sivaprasad Addepalli2024-09-091-1/+1
| | | | arm64: versal2: Add firmware node entry
* linux-xlnx : Updated SRCREV for 2024.2_5243Sivaprasad Addepalli2024-09-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | misc: xilinx_puf: Cleanup platform device resource on module exit crypto: xilinx/zynqmp-aes-gcm: Fix return error code of GCM decrypt operation Reapply "dt-bindings: Add binding for IDT 8T49N24x UFT" PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx QDMA PCIe Root Port Bridge net: axienet: Add support for DCMAC ethernet IP dt-bindings: net: xlnx,axi-ethernet: Add bindings for DCMAC net: axienet: Add gt_reset hook in struct axienet_config to reset GT net: axienet: Rename MRMAC specific reset delay macro to generic one net: phylink: Add phy interfaces 100Gbase-r, 200Gbase-r and 400Gbase-r net: phy: Add phy interfaces 100Gbase-r, 200Gbase-r and 400Gbase-r arm64: xilinx: Remove current-speed property from pl011 arm64: versal-net: add OSPI reset gpio for VNX board usb: dwc3: core: Prevent phy suspend during init xilinx-ecdsa: Export ASN decoding function from ecdsa module crypto: xilinx: Cleanup platform device resource on module exit phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume irqchip: xilinx: adopt clock support staging: tsmux: Fix module autoloading gpio: zynqmp-modepin: Fix module autoloading
* dts : Updated SRCREV for 2024.2_2511Sivaprasad Addepalli2024-09-081-1/+1
| | | | board-versal-net-psx-virt: Change the cpu frequency
* qemu : Updated SRCREV for 2024.2_2903Sivaprasad Addepalli2024-09-081-1/+1
| | | | xlnx-versal-pmx-global: Introduce DOMAIN_ISO_CNTRL persitent register support
* linux-xlnx : Updated SRCREV for 2024.2_6031Sivaprasad Addepalli2024-09-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | net: axienet: Deprecate xlnx,mrmac-rate and switch to generic max-speed binding dt-bindings: net: xlnx,axi-ethernet: Use "max-speed" device tree property arm64: xilinx: Enable UFS, ARM SCMI in default config ufs: amd-versal2: Disable AUTO_HIBERN8 and HS modes ufs: amd-versal2: Add AMD Versal Gen 2 UFS support ufs: core: Add vendor specific ops to handle interrupts firmware: xilinx: Add UFS interface API support for Versal Gen 2 dt-bindings: ufs: amd-versal2: Add support for AMD Versal Gen 2 UFS edac: xilsem: Add error event handling support for Versal NET platform dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string staging: xilinx-tsn: Add Endpoint Packet Switch Feature and Control Frame Handling for STP/LLDP dt-bindings: staging: xilinx_tsn_ep_ex: Deprecate packet-switch property dt-bindings: staging: xilinx_tsn_ep: Add Endpoint Packet Switch support arm64: configs: Enable CRYPTO_DEV_XILINX_ECDSA by default crypto: xilinx: Add NIST P-521 curve support in ECDSA Driver remoteproc: zynqmp_r5: Update power domains property to power-domains crypto: x509 - Add OID for NIST P521 and extend parser for it crypto: asymmetric_keys - Adjust signature size calculation for NIST P521 crypto: ecdsa - Register NIST P521 and extend test suite crypto: ecdsa - Rename keylen to bufsize where necessary crypto: ecdsa - Replace ndigits with nbits where precision is needed crypto: ecc - Add NIST P521 curve parameters crypto: ecc - Add special case for NIST P521 in ecc_point_mult crypto: ecc - Implement vli_mmod_fast_521 for NIST p521 crypto: ecc - Add nbits field to ecc_curve structure crypto: ecdsa - Extend res.x mod n calculation for NIST P521 crypto: ecdsa - Adjust tests on length of key parameters crypto: ecdsa - Convert byte arrays with key coordinates to digits crypto: ecc - Use ECC_CURVE_NIST_P192/256/384_DIGITS where possible i2c: cadence: Add atomic transfer support for controller version 1.4 i2c: cadence: Split cdns_i2c_master_xfer for Atomic Mode i2c: cadence: Relocate cdns_i2c_runtime_suspend and cdns_i2c_runtime_resume to facilitate atomic mode i2c: cadence: remove printout on handled timeouts i2c: cadence: Add system suspend and resume PM support misc: xilinx-ai-engine: Add condition compilation flag irqchip/xilinx: Fix shift out of bounds
* qemu : Updated SRCREV for 2024.2_9883Sivaprasad Addepalli2024-09-051-1/+1
| | | | | | | | versal: pmc-sysmon: Add measurement-file property for scripting injections versal: pmc-sysmon: Fix device temperature report versal: pmc-sysmon: Add VCCINT_FPD and VCCINT_LPD injections versal: pmc-sysmon: Set initial measurement by injection versal: pmc-sysmon: Fix lost root-id in sensor info
* aie-rt : Updated SRCREV for 2024.2_9879Sivaprasad Addepalli2024-09-051-1/+1
| | | | driver: src:Routing support high level api.
* xrt, zocl : update commit id for 2024.2Manoj Takasi2024-09-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changelog: updating petalinux to latest (#8386) XRT OS Support for Ubuntu 24.04. Removed one element arrays in the driver code (#8381) [XDP] Fix the incorrect xclbin type deduction & add safe check (#8380) Bump up the aiebu version which pulls in the latest aie-rt (#8383) VITIS-13050 and VITIS-9682 (#8382) add myself as code owner for xclbinutil (#8378) External Buffer support for Edge devices (#8379) Removed hw_context flag dependency for edge on xrt.ini (#8372) moving to latest petalinux (#8371) Added hw ctx support for edge (#8305) Bump up the aiebu submodule version to resolve link with aie-rt failu… (#8353) Initialze debug buffer in Ml Timeline, AIE Profile/Debug plugins to avoid junk values when AIE trace is enabled. (#8370) Fix C HIP application compilation (#8369) [XDP] profiling support to measure latency and throughput (#8359) Add --recursive option to git submodule to fetch and update nested submodules. (#8358) Update petalinux version to v2024.2_06301231 build (#8365) Update HIP Module Load APIs (#8362) Enabled flushing of trace modules for core tiles everytime for client and edge (#8367) Added support for compile time trace for edge devices in XDP (#8366) Fix for Sw emu graph handle (#8364) Fixing incorrect copyrights on XDP files (#8360) VITIS-11401 : Shim DMA based array reconfiguration overhead (#8308) VITIS-13074 - Dump common control codes before and after being patched (#8338) Fix for non-graph XRT use cases (#8356) fixing gmio tests in sw_emu (#8357) VITIS-11024 enable hw_context support for xrt::graph objects (#8340) [XDP] Fix for single tile selection in AIE Trace plugin (#8354) add new action mask to indicate the driver to program the PDI. (#8351) Changes to use aie trace metadata section (#8352) Changing default slot for PS kernels to Zero (#8347) VITIS-11934GeMM Test Has Delay After Setting Performance Mode (#8348) fix the code formatting (indentation, trailing spaces), fix the difference between gitub and perforce (#8350) Update the ELFIO submodule to point to Release_3.12 which fixes many C++ warnings (#8349) Add changes to build xclbinutil standalone (#8345) Signed-off-by: Manoj Takasi <mtakasi@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* bitstream: Add tempoary workaround for buildMark Hatle2024-09-041-1/+4
| | | | | | | | | | | The build process expects a bitstream in some cases and provides it in the TOPDIR. We don't want to just set a default, because if it's not provided it should not be expected. Once the generic machines become 'firmware-less', this workaround should be removed. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* Revert "linux-xlnx : Updated SRCREV for 2024.2_9047"Mark Hatle2024-09-041-1/+1
| | | | | | | | This reverts commit 110ab8cc450c4a17b5b62ceb96fd0bd8a0364e3d. Triggers a problem booting Kria boards. Reverting until we can understand why. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* xilinx-bootbin: Add BOOTBIN_INCLUDE default valueJohn Toomey2024-09-041-0/+2
| | | | | Signed-off-by: John Toomey <john.toomey@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* xilinx-bootbin: Move BIF_BITSTREAM_ATTR from meta-xilinx-tools layerSandeep Gundlupet Raju2024-09-041-0/+2
| | | | | | | | | | Using MACHINE_FEATURES += "fpga-overlay" for dynamic configuration use cases is not specific to xsct build, this is also required for SDT builds. Hence move BIF_BITSTREAM_ATTR variable from meta-xilinx-tools to meta-xilinx layer. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* versal-net-generic.conf: Remove versal-net-ipp-rev1.9 file and add ↵Ashwini Lomate2024-09-041-1/+1
| | | | | | | | | | versal-net-vn-p-b2197-00-reva Emulation/simulation versal-net platforms are not tested so removed in dtg and uboot. Instead of versal-net-ipp-rev1.9 using versal-net-vn-p-b2197-00-reva as DT_BOARD_FLAGS name Signed-off-by: Ashwini Lomate <ashwini.lomate@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* qemu : Updated SRCREV for 2024.2_9347Sivaprasad Addepalli2024-09-031-1/+1
| | | | | | hcd-dwc3: Correct default number of maximum slots xlnx-versal-ddrmc-ub: Add fields related to DDRMC5C xlnx-versal-pmc-int: Add axi slave switch resets
* dts : Updated SRCREV for 2024.2_7155Sivaprasad Addepalli2024-09-031-1/+1
| | | | | zynqmp:usb_dwc3: Correct USB maximum slots to 64 board-versal-xcvm2152-ps-virt: Update idcode
* arm-trusted-firmware : Updated SRCREV for 2024.2_3431Sivaprasad Addepalli2024-09-021-1/+1
| | | | | | | | | | | | fix(xilinx): fix OVERRUN coverity violation feat(versal): deprecate build time arg VERSAL_PLATFORM feat(versal2): add dummy implementation for SCMI PD fix(versal2): add ufs specific features support docs(xilinx): update SMC documentation in TF-A feat(xilinx): add feature check function for TF-A specific APIs feat(xilinx): update SiP SVC version number feat(xilinx): update TF-A to passthrough all PLM commands fix(xilinx): fix logic to read ipi response
* lopper: update SRCREV for 2024.2Swagath Gadde2024-08-282-2/+42
| | | | | | | | | | | | | | | | | | | | | Change Log: petalinuxconfig_xlnx.py:pass memory_type value to device_type. lops: mb-riscv: Add generic cpus_* pattern to re-use riscv lop file for asu. openamp: xlnx: Validate reserved-mem regions. isospec: add permissive flag for non-SMID devices. lopper/log: move basicConfig to init(). lopper: assists: gen_domain_dts: Add Audio formatter DT yaml. lopper: assists: gen_domain_dts: Add SPDIF DT yaml. lopper: assists: gen_domain_dts: Add I2S sound card DT yaml. lopper: assists: gen_domain_dts: Add SDI Rx Subsystem DT yaml. lopper: assists: gen_domain_dts: Add SDI Tx Subsystem DT yaml. assists: gen_domain_dts: Add support for MB-V zephyr. Signed-off-by: Swagath Gadde <swagath.gadde@amd.com> Add fix for two typos in the openamp xlnx processing. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* Add kernel config files to pull in extra hwmon modulesJonathan Stroud2024-08-282-0/+4
| | | | | | Signed-off-by: Jonathan Stroud <jonathan.stroud@amd.com> Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* u-boot-xlnx : Updated SRCREV for 2024.2_3727Sivaprasad Addepalli2024-08-281-1/+1
| | | | | | | | | | | | | | arm64: versal2: add power domain and reset entry for usb arm64: versal2: Update UFS dt node arm64: zynqmp: Add u-boot command to boot into recovery image arm64: zynqmp: Enable usb3 for k24 som spi: cadence_qspi: Fix Versal NET loopback bit error spi: cadence_qspi: Fix Versal NET ospi indirect write timed out issue arm64: versal-net: Enable octal DTR mode cmd: sf: fix redefinition of return value in read/write sf: Add lock info option to sf command list spi: zynq-qspi: Fix QSPI controller stripe for stacked mode spi: zynq_qspi: Add write status command to update_stripe()
* linux-xlnx : Updated SRCREV for 2024.2_9047Sivaprasad Addepalli2024-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | net: axienet: Deprecate xlnx,mrmac-rate and switch to generic max-speed binding dt-bindings: net: xlnx,axi-ethernet: Use "max-speed" device tree property arm64: xilinx: Enable UFS, ARM SCMI in default config ufs: amd-versal2: Disable AUTO_HIBERN8 and HS modes ufs: amd-versal2: Add AMD Versal Gen 2 UFS support ufs: core: Add vendor specific ops to handle interrupts firmware: xilinx: Add UFS interface API support for Versal Gen 2 dt-bindings: ufs: amd-versal2: Add support for AMD Versal Gen 2 UFS edac: xilsem: Add error event handling support for Versal NET platform dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string staging: xilinx-tsn: Add Endpoint Packet Switch Feature and Control Frame Handling for STP/LLDP dt-bindings: staging: xilinx_tsn_ep_ex: Deprecate packet-switch property dt-bindings: staging: xilinx_tsn_ep: Add Endpoint Packet Switch support arm64: configs: Enable CRYPTO_DEV_XILINX_ECDSA by default crypto: xilinx: Add NIST P-521 curve support in ECDSA Driver remoteproc: zynqmp_r5: Update power domains property to power-domains crypto: x509 - Add OID for NIST P521 and extend parser for it crypto: asymmetric_keys - Adjust signature size calculation for NIST P521 crypto: ecdsa - Register NIST P521 and extend test suite crypto: ecdsa - Rename keylen to bufsize where necessary crypto: ecdsa - Replace ndigits with nbits where precision is needed crypto: ecc - Add NIST P521 curve parameters crypto: ecc - Add special case for NIST P521 in ecc_point_mult crypto: ecc - Implement vli_mmod_fast_521 for NIST p521 crypto: ecc - Add nbits field to ecc_curve structure crypto: ecdsa - Extend res.x mod n calculation for NIST P521 crypto: ecdsa - Adjust tests on length of key parameters crypto: ecdsa - Convert byte arrays with key coordinates to digits crypto: ecc - Use ECC_CURVE_NIST_P192/256/384_DIGITS where possible i2c: cadence: Add atomic transfer support for controller version 1.4 i2c: cadence: Split cdns_i2c_master_xfer for Atomic Mode i2c: cadence: Relocate cdns_i2c_runtime_suspend and cdns_i2c_runtime_resume to facilitate atomic mode i2c: cadence: remove printout on handled timeouts i2c: cadence: Add system suspend and resume PM support misc: xilinx-ai-engine: Add condition compilation flag irqchip/xilinx: Fix shift out of bounds
* aie-rt : Updated SRCREV for 2024.2_7587Sivaprasad Addepalli2024-08-281-1/+1
| | | | driver: src:add the numtiles check condition in PrivilegeInitPart
* qemu-devicetrees: Add alternative vck190 configMark Hatle2024-08-272-0/+1468
| | | | | | | | Reorder the serial ports for an alternative vck190 machine. This puts the Linux (APU) serial ports first in the processing order which will help enable Yocto Project testimage support. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* qemu-xilinx: Backport QMP changes for YP compatibilityMark Hatle2024-08-273-0/+1099
| | | | | | | | Yocto Project scarthgap requries a slightly newer qmp in order for testimage and other automations to work. Backport the necessary changes to enable the required interfaces. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* meta-xilinx-bsp: Move to provencore support to meta-petalinuxMark Hatle2024-08-271-3/+0
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* amd_spi_iamge: Fix image-selector manifest file nameJohn Toomey2024-08-271-1/+1
| | | | | Signed-off-by: John Toomey <john.toomey@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* dts : Updated SRCREV for 2024.2_2263Sivaprasad Addepalli2024-08-261-1/+1
| | | | versal: Add Versal Alveo V80 board
* meta-xilinx-core: openamp: device-tree: Change power-domain property to ↵Ben Levinsky2024-08-253-20/+20
| | | | | | | | | | power-domains Update Overlays to go with genpd convention and use 'power-domains' for management with firmware node ID's. Signed-off-by: Ben Levinsky <ben.levinsky@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* meta-xilinx-core: openamp: device-tree: zynq: Remove openamp support for ↵Rajiv Mohan2024-08-254-60/+1
| | | | | | | | | | | | | | | | | | | | | Zynq-7000 SoC Remove openamp support for Zynq-7000 Soc Reasons for removing listed below: 1 - Removing redundant or unmaintained code from Linux tree 2 - Reduce technical debt carried by OpenAMP team 3 - OpenAMP drivers (remoteproc/rpmsg) for Zynq-7000 SoC is not standardized on same code base as ZynqMP or Versal 4 - very few customer using openamp on Zynq-7000 SoC For users of Zynq-7000 SoC the last working and tested release version is rel-v2023.2 Signed-off-by: Rajiv Mohan <rajiv.mohan@amd.com> Removed the reference to zynq from the device-tree bbappend and openamp specific device-tree recipe. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* kernel-modules-hdmi21: Add recipe for building HDMI v2.1 FMC moduleRajesh Gugulothu2024-08-251-0/+22
| | | | | | | Add initial version of recipe for building HDMI v2.1 FMC module Signed-off-by: Rajesh Gugulothu <rajesh.gugulothu@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* boot.cmd.generic*: Update bootargs to select full rootfsJohn Vicky Vykuntapu2024-08-252-3/+3
| | | | | | | | Update bootargs to pick full rootfs according to the selected boot targets in case of kria som. Signed-off-by: John Vicky Vykuntapu <johnvicky.vykuntapu@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* device-tree: Fixup dependencies for SDTMark Hatle2024-08-251-0/+3
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* base-pdi: Skip default build dependencyMark Hatle2024-08-251-0/+2
| | | | | | | base-pdi doesn't requrie any default dependencies, instead just copy the file(s) and setup the package(s) as necessary. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* extract-cdo: Fix do_deploy behaviorMark Hatle2024-08-252-3/+3
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* microblaze-generic: Remove obsolete USE_BOARD settingsMark Hatle2024-08-251-10/+0
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* meta-xilinx-core: Enable generic machine to be firmware-lessMark Hatle2024-08-258-75/+72
| | | | | | | | | | | | | | | | Generic machines no longer depend on firmware (ESW) components. Thus they will now build a full Linux system, where possible, without XSCT or SDT modes. (Default, if XILINX_WITH_ESW is set to xsct, still builds firmware.) It is up to the specific machine.conf files to enable the correct build flow and that will enable the necessary firmware dependencies for the SoC. This also means HDF_MACHINES is no longer required. Set HDF_MACHINES = "" to produce a firmware-less build. Also correct QEMU settings so they can be overridden. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* meta-xilinx-core: mb-realloc: Move from meta-xilinx-toolsMark Hatle2024-08-252-0/+275
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* *-generic.conf: Fix DTC_FLAGS defaultMark Hatle2024-08-254-4/+4
| | | | | | The DTC_FLAGS default should be set with ?= so it can be overridden. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* xilinx-deprecated: Only print a message if it's not blankMark Hatle2024-08-251-1/+2
| | | | | | | | | | Before all messages, even blank ones would be displayed. This made it difficult to have messages that only appeared sometimes. The standard yocto project behavior for messages is "" (blank) means no message, anything else gets displayed. Follow this behavior. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* linux-xlnx : Updated SRCREV for 2024.2_3935Sivaprasad Addepalli2024-08-221-1/+1
| | | | Revert "arm64: xilinx: Enable SMMU by default"
* libtraceevent: drop for upstreamTrevor Woerner2024-08-202-97/+0
| | | | | | | | Upstream poky/oe-core contains the exact same recipe. Remove the local one and let upstream maintain it. Signed-off-by: Trevor Woerner <trevor.woerner@amd.com> Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
* libslirp: drop for upstreamTrevor Woerner2024-08-201-18/+0
| | | | | | | | Upstream poky/oe-core contains the exact same recipe. Remove the local one and let upstream maintain it. Signed-off-by: Trevor Woerner <trevor.woerner@amd.com> Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
* iproute2: upgrade 5.15.0 → 6.7.0 with upstreamTrevor Woerner2024-08-203-141/+0
| | | | | | | | Drop the locally-carried recipe since the upstream one in oe-core/poky is a newer release. Signed-off-by: Trevor Woerner <trevor.woerner@amd.com> Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
* xserver-xorg: Add required NULL checkAnatoliy Klymenko2024-08-192-0/+36
| | | | | | | | | | Add NULL check in xf86RotateBlockHandler(). The checked BlockHandler callback is not guaranteed to be always defined. Fixes xorg crash on startup when screen rotation option is enabled. Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
* xf86-video-armsoc: Accelerated composition optionAnatoliy Klymenko2024-08-192-0/+111
| | | | | | | | | Make picture composition acceleration optional. Add xorg config option to control picture composition acceleration. Update xf86-video-armsoc man page. Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
* dfx-mgr : Updated SRCREV for 2024.2_3291Sivaprasad Addepalli2024-08-181-1/+1
| | | | | | | | DFX-MGR: Bug fix while loading smartcam app DFX-MGR: Update listPackage with RPU slot number DFX-MGR extension to support -remove for RPU DFX-MGR extension to support -load for RPU DFX-MGR extension to support -listPackage for RPU
* boot-jtag.py: Add IMAGE_NAME_SUFFIX to tclSandeep Gundlupet Raju2024-08-161-1/+2
| | | | | | | | | | In scarthgap release, By default IMAGE_NAME_SUFFIX=".rootfs" set in image-artifact-name.bbclass, Due to this boot-jtag script doesn't include rootfs in .tcl script. Hence add IMAGE_NAME_SUFFIX to tcl script. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-03 19:34:35 +0000