From 155bedb17469d3f622f184e74b47e3d660223008 Mon Sep 17 00:00:00 2001 From: Mark Hatle Date: Sat, 20 May 2023 09:09:37 -0600 Subject: Remove vck500, vhk158 and zcu670, these are not publicly available BSPs. Signed-off-by: Mark Hatle --- meta-xilinx-bsp/README.md | 3 -- meta-xilinx-bsp/conf/machine/vck5000-versal.conf | 49 ---------------------- meta-xilinx-bsp/conf/machine/vhk158-versal.conf | 52 ------------------------ meta-xilinx-bsp/conf/machine/zcu670-zynqmp.conf | 50 ----------------------- 4 files changed, 154 deletions(-) delete mode 100644 meta-xilinx-bsp/conf/machine/vck5000-versal.conf delete mode 100644 meta-xilinx-bsp/conf/machine/vhk158-versal.conf delete mode 100644 meta-xilinx-bsp/conf/machine/zcu670-zynqmp.conf diff --git a/meta-xilinx-bsp/README.md b/meta-xilinx-bsp/README.md index 29177ad7..96a23687 100644 --- a/meta-xilinx-bsp/README.md +++ b/meta-xilinx-bsp/README.md @@ -37,14 +37,11 @@ The following boards are supported by the meta-xilinx-bsp layer: | | [ZCU1285](https://www.xilinx.com/products/boards-and-kits/zcu1285.html) | [zcu1285-zynqmp](conf/machine/zcu1285-zynqmp.conf) | `zcu1285-zynqmp` | `zcu1285-reva` | Yes | Yes | | | [ZCU208](https://www.xilinx.com/products/boards-and-kits/zcu208.html) | [zcu208-zynqmp](conf/machine/zcu208-zynqmp.conf) | `zcu208-zynqmp` | `zcu208-reva` | Yes | Yes | | | [ZCU216](https://www.xilinx.com/products/boards-and-kits/zcu216.html) | [zcu216-zynqmp](conf/machine/zcu216-zynqmp.conf) | `zcu216-zynqmp` | `zcu216-reva` | Yes | Yes | -| | [ZCU670](https://www.xilinx.com/products/boards-and-kits/zcu670.html) | [zcu670-zynqmp](conf/machine/zcu670-zynqmp.conf) | `zcu670-zynqmp` | `zcu670-revb` | Yes | Yes | | Versal | [VCK190](https://www.xilinx.com/products/boards-and-kits/vck190.html) | [vck190-versal](conf/machine/vck190-versal.conf) | `vck190-versal` | `versal-vck190-reva-x-ebm-01-reva` | Yes | Yes | | | [VMK180](https://www.xilinx.com/products/boards-and-kits/vmk180.html) | [vmk180-versal](conf/machine/vmk180-versal.conf) | `vmk180-versal` | `versal-vmk180-reva-x-ebm-01-reva` | Yes | Yes | -| | [VCK5000](https://www.xilinx.com/products/boards-and-kits/vck5000.html) | [vck5000-versal](conf/machine/vck5000-versal.conf) | `vck5000-versal` | `versal-vck5000-reva-x-ebm-01-reva` | No | No | | | [VPK120](https://www.xilinx.com/products/boards-and-kits/vpk120.html) | [vpk120-versal](conf/machine/vpk120-versal.conf) | `vpk120-versal` | `versal-vpk120-reva` | Yes | Yes | | | [VPK180](https://www.xilinx.com/products/boards-and-kits/vpk180.html) | [vpk180-versal](conf/machine/vpk180-versal.conf) | `vpk180-versal` | `versal-vpk180-reva` | Yes | Yes | | | [VEK280](https://www.xilinx.com/products/boards-and-kits/vek280.html) | [vek280-versal](conf/machine/vek280-versal.conf) | `vek280-versal` | `versal-vek280-reva` | Yes | Yes | -| | [VHK158](https://www.xilinx.com/products/boards-and-kits/vhk158.html) | [vhk158-versal](conf/machine/vhk158-versal.conf) | `vhk158-versal` | `versal-vhk158-reva` | Yes | Yes | > **Note:** Additional information on Xilinx architectures can be found at: https://www.xilinx.com/products/silicon-devices.html diff --git a/meta-xilinx-bsp/conf/machine/vck5000-versal.conf b/meta-xilinx-bsp/conf/machine/vck5000-versal.conf deleted file mode 100644 index a80788cc..00000000 --- a/meta-xilinx-bsp/conf/machine/vck5000-versal.conf +++ /dev/null @@ -1,49 +0,0 @@ -#@TYPE: Machine -#@NAME: vck500-versal -#@DESCRIPTION: Machine configuration for the VCK5000 evaluation board. - -# Compatibility with old BOARD value. -# TODO - Remove these once removed from petalinux bsp -MACHINEOVERRIDES =. "vck5000:" - -#### Preamble -MACHINEOVERRIDES =. "${@['', 'vck5000-versal:']['vck5000-versal' !='${MACHINE}']}" -#### Regular settings follow - -# Variables that changes based on hw design or board specific requirement must be -# defined before calling the required inclusion file else pre-expansion value -# defined in versal-generic.conf will be set. - -# Yocto device-tree variables -YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" -YAML_DT_BOARD_FLAGS ?= "{BOARD template}" - -# Yocto arm-trusted-firmware(TF-A) variables -ATF_CONSOLE_DEFAULT ?= "pl011" -TFA_BL33_LOAD ?= "0x8000000" - -# Yocto PLM variables -YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" -YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" - -# Yocto KERNEL Variables -UBOOT_ENTRYPOINT ?= "0x200000" -UBOOT_LOADADDRESS ?= "0x200000" - -# vck5000-versal Serial Console -SERIAL_CONSOLES ?= "115200;ttyAMA0" -YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" - -# Required generic machine inclusion -# VCK5000 board uses Versal AI Core device hence use soc variant based generic -# machine inclusion -require conf/machine/versal-ai-core-generic.conf - -# This machine conf file uses vck5000-versal xsa as reference input. -# User can override with vck5000 custom xsa using HDF_BASE and HDF_PATH variables -# from local.conf. -HDF_MACHINE = "vck5000-versal" - -#### No additional settings should be after the Postamble -#### Postamble -PACKAGE_EXTRA_ARCHS:append = "${@['', 'vck5000_versal']['vck5000-versal' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/vhk158-versal.conf b/meta-xilinx-bsp/conf/machine/vhk158-versal.conf deleted file mode 100644 index 5c0406de..00000000 --- a/meta-xilinx-bsp/conf/machine/vhk158-versal.conf +++ /dev/null @@ -1,52 +0,0 @@ -#@TYPE: Machine -#@NAME: vhk158-versal -#@DESCRIPTION: Machine configuration for the VHK158 evaluation board. - -#### Preamble -MACHINEOVERRIDES =. "${@['', 'vhk158-versal:']['vhk158-versal' !='${MACHINE}']}" -#### Regular settings follow - -# Variables that changes based on hw design or board specific requirement must be -# defined before calling the required inclusion file else pre-expansion value -# defined in versal-generic.conf will be set. - -# Yocto device-tree variables -YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" -YAML_DT_BOARD_FLAGS ?= "{BOARD versal-vhk158-reva}" - -# Yocto arm-trusted-firmware(TF-A) variables -ATF_CONSOLE_DEFAULT ?= "pl011" -TFA_BL33_LOAD ?= "0x8000000" - -# Yocto PLM variables -YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" -YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" - -# Yocto KERNEL Variables -UBOOT_ENTRYPOINT ?= "0x200000" -UBOOT_LOADADDRESS ?= "0x200000" - -# vhk158-versal Serial Console -SERIAL_CONSOLES ?= "115200;ttyAMA0" -YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" - -# Required generic machine inclusion -# VHK158 board uses Versal HBM device hence use soc variant based generic -# machine inclusion -require conf/machine/versal-hbm-generic.conf - -# This machine conf file uses vhk158-versal xsa as reference input. -# User can override with vhk158 custom xsa using HDF_BASE and HDF_PATH variables -# from local.conf. -HDF_MACHINE = "vhk158-versal" - -# VHK158 has 32GB memory only but default versal-generic has QB_MEM set to 8G, -# Since versal-vhk158-reva.dts has 32GB set, we need set same in QB_MEM -QB_MEM = "-m 32G" - -QEMU_HW_DTB_PS = "${QEMU_HW_DTB_PATH}/board-versal-ps-vhk158.dtb" -QEMU_HW_DTB_PMC = "${QEMU_HW_DTB_PATH}/board-versal-pmc-virt.dtb" - -#### No additional settings should be after the Postamble -#### Postamble -PACKAGE_EXTRA_ARCHS:append = "${@['', 'vhk158_versal']['vhk158-versal' != '${MACHINE}']}" \ No newline at end of file diff --git a/meta-xilinx-bsp/conf/machine/zcu670-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu670-zynqmp.conf deleted file mode 100644 index 6b1dd488..00000000 --- a/meta-xilinx-bsp/conf/machine/zcu670-zynqmp.conf +++ /dev/null @@ -1,50 +0,0 @@ -#@TYPE: Machine -#@NAME: zcu670-zynqmp -#@DESCRIPTION: Machine configuration for the ZCU670 evaluation board. - -#### Preamble -MACHINEOVERRIDES =. "${@['', 'zcu670-zynqmp:']['zcu670-zynqmp' !='${MACHINE}']}" -#### Regular settings follow - -# Variables that changes based on hw design or board specific requirement must be -# defined before calling the required inclusion file else pre-expansion value -# defined in zynqmp-generic.conf will be set. - -# Yocto device-tree variables -YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" -YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" -YAML_DT_BOARD_FLAGS ?= "{BOARD zcu670-revb}" - -# Yocto arm-trusted-firmware(TF-A) variables -ATF_CONSOLE_DEFAULT ?= "cadence" -TFA_BL33_LOAD ?= "0x8000000" - -# Yocto PMUFW variables -YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" -YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" - -# Yocto FSBL variables -YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" -YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" - -# Yocto KERNEL Variables -UBOOT_ENTRYPOINT ?= "0x200000" -UBOOT_LOADADDRESS ?= "0x200000" - -# zcu670-zynqmp Serial Console -SERIAL_CONSOLES ?= "115200;ttyPS0" -YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" - -# Required generic machine inclusion -# ZCU670 board uses ZynqMP DR device hence use soc variant based generic machine -# inclusion -require conf/machine/zynqmp-dr-generic.conf - -# This eval board machine conf file uses zcu670-zynqmp xsa as reference input. -# User can override with zcu670 custom xsa using HDF_BASE and HDF_PATH variables -# from local.conf. -HDF_MACHINE = "zcu670-zynqmp" - -#### No additional settings should be after the Postamble -#### Postamble -PACKAGE_EXTRA_ARCHS:append = "${@['', 'zcu670_zynqmp']['zcu670-zynqmp' != '${MACHINE}']}" -- cgit v1.2.3-54-g00ecf