# This is a boot script for U-Boot
# Generate boot.scr:
# mkimage -c none -A arm -T script -d boot.cmd.default boot.scr
#
################
fitimage_name=@@FIT_IMAGE@@
kernel_name=@@KERNEL_IMAGE@@
ramdisk_name=@@RAMDISK_IMAGE1@@
rootfs_name=@@RAMDISK_IMAGE@@
@@PRE_BOOTENV@@


setenv get_bootargs 'fdt addr $fdtcontroladdr;fdt get value bootargs /chosen bootargs;'
setenv update_bootargs 'if test -n ${launch_ramdisk_init} && test ${bootargs} = "";then if run get_bootargs;then setenv bootargs "\$bootargs launch_ramdisk_init=${launch_ramdisk_init} $extrabootargs";fi;fi'

for boot_target in ${boot_targets};
do
	echo "Trying to load boot images from ${boot_target}"
	if test "${boot_target}" = "jtag" ; then
		run update_bootargs
		@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
	fi
	if test "${boot_target}" = "mmc0" || test "${boot_target}" = "mmc1" || test "${boot_target}" = "usb0" || test "${boot_target}" = "usb1"; then
		if test -e ${devtype} ${devnum}:${distro_bootpart} /@@UENV_TEXTFILE@@; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@UENV_MMC_LOAD_ADDRESS@@ @@UENV_TEXTFILE@@;
			echo "Importing environment(@@UENV_TEXTFILE@@) from ${boot_target}..."
			env import -t @@UENV_MMC_LOAD_ADDRESS@@ $filesize
			if test -n $uenvcmd; then
				echo "Running uenvcmd ...";
				run uenvcmd;
			fi
		fi
		if test -e ${devtype} ${devnum}:${distro_bootpart} /${fitimage_name}; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@FIT_IMAGE_LOAD_ADDRESS@@ ${fitimage_name};
			bootm @@FIT_IMAGE_LOAD_ADDRESS@@;
                fi
		if test -e ${devtype} ${devnum}:${distro_bootpart} /${kernel_name}; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@KERNEL_LOAD_ADDRESS@@ ${kernel_name};
		fi
		if test -e ${devtype} ${devnum}:${distro_bootpart} /system.dtb; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@DEVICETREE_ADDRESS_SD@@ system.dtb;
			setenv fdtcontroladdr @@DEVICETREE_ADDRESS_SD@@
		fi
		if test -e ${devtype} ${devnum}:${distro_bootpart} /devicetree/openamp.dtbo; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@DEVICETREE_OVERLAY_ADDRESS@@ devicetree/openamp.dtbo;
			fdt addr @@DEVICETREE_ADDRESS_SD@@
			fdt resize 8192
			fdt apply @@DEVICETREE_OVERLAY_ADDRESS@@
		fi
		run update_bootargs
		if test -e ${devtype} ${devnum}:${distro_bootpart} /${ramdisk_name} && test "${skip_tinyramdisk}" != "yes"; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@RAMDISK_IMAGE_ADDRESS@@ ${ramdisk_name};
			@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS_SD@@
		fi
		if test -e ${devtype} ${devnum}:${distro_bootpart} /${rootfs_name} && test "${skip_ramdisk}" != "yes"; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@RAMDISK_IMAGE_ADDRESS@@ ${rootfs_name};
			@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS_SD@@
		fi
		@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ - @@DEVICETREE_ADDRESS_SD@@
	fi
	if test "${boot_target}" = "xspi0" || test "${boot_target}" = "xspi1" || test "${boot_target}" = "qspi" || test "${boot_target}" = "qspi0"; then
		sf probe 0 0 0;
		sf read @@FIT_IMAGE_LOAD_ADDRESS@@ @@QSPI_FIT_IMAGE_OFFSET@@ @@QSPI_FIT_IMAGE_SIZE@@
		bootm @@FIT_IMAGE_LOAD_ADDRESS@@;
		echo "Booting using Fit image failed"

		sf read @@KERNEL_LOAD_ADDRESS@@ @@QSPI_KERNEL_OFFSET@@ @@QSPI_KERNEL_SIZE@@
		sf read @@RAMDISK_IMAGE_ADDRESS@@ @@QSPI_RAMDISK_OFFSET@@ @@QSPI_RAMDISK_SIZE@@
		run update_bootargs
		@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@;
		echo "Booting using Separate images failed"
	fi
	if test "${boot_target}" = "nand" || test "${boot_target}" = "nand0"; then
		nand info;
		nand read @@FIT_IMAGE_LOAD_ADDRESS@@ @@NAND_FIT_IMAGE_OFFSET@@ @@NAND_FIT_IMAGE_SIZE@@
		bootm @@FIT_IMAGE_LOAD_ADDRESS@@;
		echo "Booting using Fit image failed"

		nand read @@KERNEL_LOAD_ADDRESS@@ @@NAND_KERNEL_OFFSET@@ @@NAND_KERNEL_SIZE@@
		nand read @@RAMDISK_IMAGE_ADDRESS@@ @@NAND_RAMDISK_OFFSET@@ @@NAND_RAMDISK_SIZE@@
		run update_bootargs
		@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@;
		echo "Booting using Separate images failed"
	fi
	if test "${boot_target}" = "nor" || test "${boot_target}" = "nor0"; then
		cp.b @@QSPI_FIT_IMAGE_OFFSET@@ @@FIT_IMAGE_LOAD_ADDRESS@@ @@QSPI_FIT_IMAGE_SIZE@@
		bootm @@FIT_IMAGE_LOAD_ADDRESS@@;
		echo "Booting using Fit image failed"

		cp.b @@QSPI_KERNEL_OFFSET@@ @@KERNEL_LOAD_ADDRESS@@ @@QSPI_KERNEL_SIZE@@
		cp.b @@QSPI_RAMDISK_OFFSET@@ @@RAMDISK_IMAGE_ADDRESS@@ @@QSPI_RAMDISK_SIZE@@
		run update_bootargs
		@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@;
		echo "Booting using Separate images failed"
fi
done