From 01a40353d65ff7b73d507270d4c76d50886207de Mon Sep 17 00:00:00 2001 From: Andreas Wellving Date: Mon, 23 Aug 2021 16:01:06 +0200 Subject: getting-started: Mention postinstall timeout Change-Id: I6cf6d6a8e1e795bd464d845ac1024ad381a3ccb6 Signed-off-by: Andreas Wellving --- doc/book-enea-edge-getting-started/doc/installation_guide.xml | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/doc/book-enea-edge-getting-started/doc/installation_guide.xml b/doc/book-enea-edge-getting-started/doc/installation_guide.xml index 32a39c0..dbf4c54 100644 --- a/doc/book-enea-edge-getting-started/doc/installation_guide.xml +++ b/doc/book-enea-edge-getting-started/doc/installation_guide.xml @@ -97,8 +97,8 @@ When hosting an entire solution including one or several network services, the hardware must also have the resources to host one or - more VNFs. During a typical evaluation, a dual VNF service on the Enea - Edge Runtime needs a CPU with 4-8 cores and at least 8 GB RAM. The + more VNFs. A dual VNF service on the Enea + Edge Runtime typically needs a CPU with 4-8 cores and at least 8 GB RAM. The supported Intel CPUs of Enea Edge are documented in the (disconnected) in the Enea Edge Management application. The uCPE device configuration can be corrected by removing the WAN cable(s), reconnecting the laptop to the LAN interface of the uCPE device and - rebooting it. At this point, the Web-installer can be accessed from the - laptop as described in Installing Enea Edge - uCPE Device installation in the - \ No newline at end of file + -- cgit v1.2.3-54-g00ecf