7 files changed, 7506 insertions, 2 deletions

diff --git a/meta/conf/machine/zylonite.conf b/meta/conf/machine/zylonite.conf
index f42c8c10ba..644675e849 100644
--- a/meta/conf/machine/zylonite.conf
+++ b/meta/conf/machine/zylonite.conf
@@ -17,7 +17,7 @@ IMAGE_FSTYPES ?= "tar.bz2 jffs2"
 
 SERIAL_CONSOLE = "38400 ttyS0"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-zylonite"
+PREFERRED_PROVIDER_virtual/kernel = "linux-rp"
 PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
 XSERVER = "xserver-kdrive-fbdev"
 
diff --git a/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/arm_pxa_20070923.patch b/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/arm_pxa_20070923.patch
new file mode 100644
index 0000000000..1fba1a3b03
--- /dev/null
+++ b/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/arm_pxa_20070923.patch
@@ -0,0 +1,5975 @@
+# Base git commit: da8f153e51290e7438ba7da66234a864e5d3e1c1
+#       (Revert "x86_64: Quicklist support for x86_64")
+#
+# Author:    eric miao (Wed Sep 12 03:13:17 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:18:19 BST 2007)
+#   
+#   [ARM] pxa: PXA3xx base support
+#   
+#   Signed-off-by: eric miao
+#   Signed-off-by: Russell King
+#
+# arch/arm/Kconfig                         |    6 
+# arch/arm/boot/compressed/head-xscale.S   |    4 
+# arch/arm/mach-pxa/Kconfig                |   30 +
+# arch/arm/mach-pxa/Makefile               |    9 
+# arch/arm/mach-pxa/clock.c                |   79 ++--
+# arch/arm/mach-pxa/clock.h                |   43 ++
+# arch/arm/mach-pxa/devices.h              |    3 
+# arch/arm/mach-pxa/generic.c              |  146 ++++---
+# arch/arm/mach-pxa/generic.h              |   26 +
+# arch/arm/mach-pxa/irq.c                  |   80 ----
+# arch/arm/mach-pxa/mfp.c                  |  235 ++++++++++++
+# arch/arm/mach-pxa/pxa25x.c               |   90 ++++
+# arch/arm/mach-pxa/pxa27x.c               |  127 ++++++
+# arch/arm/mach-pxa/pxa300.c               |   93 +++++
+# arch/arm/mach-pxa/pxa320.c               |   88 ++++
+# arch/arm/mach-pxa/pxa3xx.c               |  216 +++++++++++
+# arch/arm/mach-pxa/time.c                 |   53 ++
+# arch/arm/mach-pxa/zylonite.c             |  184 +++++++++
+# arch/arm/mach-pxa/zylonite_pxa300.c      |  188 ++++++++++
+# arch/arm/mach-pxa/zylonite_pxa320.c      |  173 +++++++++
+# arch/arm/mm/Kconfig                      |    4 
+# drivers/i2c/busses/i2c-pxa.c             |   45 +-
+# drivers/input/keyboard/pxa27x_keyboard.c |   25 +
+# drivers/mmc/host/pxamci.c                |   43 +-
+# drivers/mmc/host/pxamci.h                |   14 
+# drivers/mtd/maps/lubbock-flash.c         |    9 
+# drivers/mtd/maps/mainstone-flash.c       |    5 
+# drivers/net/irda/pxaficp_ir.c            |   51 ++
+# drivers/net/smc91x.c                     |   62 ---
+# drivers/net/smc91x.h                     |   71 +++
+# drivers/serial/pxa.c                     |  163 ++++----
+# drivers/serial/serial_core.c             |   18 
+# drivers/usb/gadget/pxa2xx_udc.c          |   68 ++-
+# drivers/usb/gadget/pxa2xx_udc.h          |    1 
+# drivers/video/pxafb.c                    |   36 +
+# drivers/video/pxafb.h                    |    1 
+# include/asm-arm/arch-pxa/hardware.h      |   72 +++
+# include/asm-arm/arch-pxa/irqs.h          |    6 
+# include/asm-arm/arch-pxa/mfp-pxa300.h    |  574 ++++++++++++++++++++++++++++++
+# include/asm-arm/arch-pxa/mfp-pxa320.h    |  446 ++++++++++++++++++++++++
+# include/asm-arm/arch-pxa/mfp.h           |  576 +++++++++++++++++++++++++++++++
+# include/asm-arm/arch-pxa/pxa-regs.h      |    2 
+# include/asm-arm/arch-pxa/pxa3xx-regs.h   |   75 ++++
+# include/asm-arm/arch-pxa/timex.h         |    2 
+# include/asm-arm/arch-pxa/zylonite.h      |   35 +
+# 45 files changed, 3825 insertions(+), 452 deletions(-)
+#    create mode 100644 arch/arm/mach-pxa/mfp.c
+#    create mode 100644 arch/arm/mach-pxa/pxa300.c
+#    create mode 100644 arch/arm/mach-pxa/pxa320.c
+#    create mode 100644 arch/arm/mach-pxa/pxa3xx.c
+#    create mode 100644 arch/arm/mach-pxa/zylonite.c
+#    create mode 100644 arch/arm/mach-pxa/zylonite_pxa300.c
+#    create mode 100644 arch/arm/mach-pxa/zylonite_pxa320.c
+#    create mode 100644 include/asm-arm/arch-pxa/mfp-pxa300.h
+#    create mode 100644 include/asm-arm/arch-pxa/mfp-pxa320.h
+#    create mode 100644 include/asm-arm/arch-pxa/mfp.h
+#    create mode 100644 include/asm-arm/arch-pxa/pxa3xx-regs.h
+#    create mode 100644 include/asm-arm/arch-pxa/zylonite.h
+#
+# Author:    Russell King (Sat Sep  1 21:27:18 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:18:17 BST 2007)
+#   
+#   [NET] smc91x: fix PXA DMA support code
+#   
+#   The PXA DMA support code for smc91x doesn't pass a struct device to
+#   the dma_*map_single() functions, which leads to an oops in the dma
+#   bounce code.  We have a struct device which was used to probe the
+#   SMC chip.  Use it.
+#   
+#   (This patch is slightly larger because it requires struct smc_local
+#   to move into the header file.)
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Sat Sep  1 21:25:09 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:18:12 BST 2007)
+#   
+#   [SERIAL] Fix console initialisation ordering
+#   
+#   Ensure pm callback is called upon initialisation to place port in
+#   correct power saving state.  Ensure console is initialised prior
+#   to deciding whether to power down the port.
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Wed Sep 19 09:21:51 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:18:07 BST 2007)
+#   
+#   [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Sat Sep  1 21:28:55 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:18:03 BST 2007)
+#   
+#   [ARM] lubbock, mainstone: only initialise if running on that platform
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    eric miao (Wed Aug 29 10:22:17 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:18:01 BST 2007)
+#   
+#   [ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.c
+#   
+#   a function pxa_init_irq_set_wake() was introduced, so that
+#   processor specific code could install their own version
+#   
+#   code setting PFER and PRER registers within pxa_gpio_irq_type
+#   are removed, and the edge configuration is postponed to the
+#   (*set_wake) and copies the GRER and GFER register, which will
+#   always be set up correctly by pxa_gpio_irq_type()
+#   
+#   Signed-off-by: eric miao
+#   Signed-off-by: Russell King
+#
+#
+# Author:    eric miao (Wed Aug 29 10:18:47 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:59 BST 2007)
+#   
+#   [ARM] 4559/1: pxa: make PXA_LAST_GPIO a run-time variable
+#   
+#   This definition produces processor specific code in generic function
+#   pxa_gpio_mode(), thus creating inconsistencies for support of pxa25x
+#   and pxa27x in a single zImage.
+#   
+#   As David Brownell suggests, make it a run-time variable and initialize
+#   at run-time according to the number of GPIOs on the processor. For now
+#   the initialization happens in pxa_init_irq_gpio(),  since there is
+#   already a parameter for that, besides, this is and MUST be earlier
+#   than any subsequent calls to pxa_gpio_mode().
+#   
+#   Signed-off-by: eric miao
+#   Signed-off-by: Russell King
+#
+#
+# Author:    eric miao (Wed Aug 29 10:15:41 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:57 BST 2007)
+#   
+#   [ARM] 4558/1: pxa: remove MACH_TYPE_LUBBOCK assignment and leave it to boot loader
+#   
+#   since both u-boot and blob support passing MACH_TYPE_LUBBOCK to the
+#   kernel, it should be quite safe to remove this
+#   
+#   Signed-off-by: eric miao
+#   Acked-by: Nicolas Pitre
+#   Signed-off-by: Russell King
+#
+#
+# Author:    eric miao (Wed Sep 12 03:13:17 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:55 BST 2007)
+#   
+#   [ARM] pxa: add PXA3 cpu_is_xxx() macros
+#   
+#   Extracted from patch by Eric Miao, this adds the cpu_is_xxx() macros
+#   for identifying PXA3 SoCs.
+#   
+#   Signed-off-by: eric miao
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Wed Sep 19 09:38:32 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:51 BST 2007)
+#   
+#   [ARM] pxa: Make CPU_XSCALE depend on PXA25x or PXA27x
+#   
+#   PXA3 SoCs are supported by the Xscale3 CPU code rather than the
+#   Xscale CPU code.
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Wed Sep 19 09:33:55 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:48 BST 2007)
+#   
+#   [ARM] pxa: mark pxa_set_cken deprecated
+#   
+#   Allow the generic clock support code to fiddle with the CKEN register
+#   and mark pxa_set_cken() deprecated.
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 10:34:37 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:43 BST 2007)
+#   
+#   [ARM] pxa: remove get_lcdclk_frequency_10khz()
+#   
+#   get_lcdclk_frequency_10khz() is now redundant, remove it.  Hide
+#   pxa27x_get_lcdclk_frequency_10khz() from public view.
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Sun Sep  2 17:09:23 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:39 BST 2007)
+#   
+#   [ARM] pxa: update pxa irda driver to use clk support
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Sun Sep  2 17:08:42 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:36 BST 2007)
+#   
+#   [ARM] pxa: Make STUART and FICP clocks available
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 10:33:35 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:34 BST 2007)
+#   
+#   [ARM] pxa: update PXA UDC driver to use clk support
+#   
+#   Note: this produces a WARN() dump.
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 10:28:15 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:31 BST 2007)
+#   
+#   [ARM] pxa: update pxa serial driver to use clk support
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 10:20:03 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:27 BST 2007)
+#   
+#   [ARM] pxa: update PXA MMC interface driver to use clk support
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 10:19:39 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:23 BST 2007)
+#   
+#   [ARM] pxa: update pxa27x keypad driver to use clk support
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 10:19:10 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:17:19 BST 2007)
+#   
+#   [ARM] pxa: update pxa i2c driver to use clk support
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 10:18:42 BST 2007)
+# Committer: Russell King (Sun Sep 23 14:16:50 BST 2007)
+#   
+#   [ARM] pxa: update pxafb to use clk support
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 10:18:02 BST 2007)
+# Committer: Russell King (Sat Sep 22 20:48:09 BST 2007)
+#   
+#   [ARM] pxa: introduce clk support for PXA SoC clocks
+#   
+#   Signed-off-by: Russell King
+#
+#    create mode 100644 arch/arm/mach-pxa/clock.h
+#
+# Author:    Russell King (Mon Aug 20 10:09:18 BST 2007)
+# Committer: Russell King (Sat Sep 22 20:48:09 BST 2007)
+#   
+#   [ARM] pxa: make pxa27x devices globally visible
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 10:07:44 BST 2007)
+# Committer: Russell King (Sat Sep 22 20:48:08 BST 2007)
+#   
+#   [ARM] pxa: fix naming of memory/lcd/core clock functions
+#   
+#   Rename pxa25x and pxa27x memory/lcd/core clock functions, and
+#   select the correct version at run time.
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Mon Aug 20 09:47:41 BST 2007)
+# Committer: Russell King (Sat Sep 22 20:48:08 BST 2007)
+#   
+#   [ARM] pxa: convert PXA serial drivers to use platform resources
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Russell King (Sat Sep  1 21:12:50 BST 2007)
+# Committer: Russell King (Sat Sep 22 20:48:07 BST 2007)
+#   
+#   [ARM] pxa: make pxa timer initialisation select clock rate at runtime
+#   
+#   Rather than using the compile-time constant CLOCK_TICK_RATE, select
+#   the clock tick rate at run time.  We organise the selection so that
+#   PXA3 automatically falls out with the right tick rate.
+#   
+#   Signed-off-by: Russell King
+#
+#
+# Author:    Nicolas Pitre (Fri Aug 17 16:55:22 BST 2007)
+# Committer: Russell King (Sat Sep 22 20:48:05 BST 2007)
+#   
+#   [ARM] 4550/1: sched_clock on PXA should cope with run time clock rate selection
+#   
+#   The previous implementation was relying on compile time optimizations
+#   based on a constant clock rate.  However, support for different PXA
+#   flavors in the same kernel binary requires that the clock be selected at
+#   run time, so here it is.
+#   
+#   Let's move this code to a more appropriate location while at it.
+#   
+#   Signed-off-by: Nicolas Pitre
+#   Signed-off-by: Russell King
+#
+#
+Index: linux-2.6.22/arch/arm/Kconfig
+===================================================================
+--- linux-2.6.22.orig/arch/arm/Kconfig  2007-09-24 20:57:20.000000000 +0200
++++ linux-2.6.22/arch/arm/Kconfig       2007-09-24 20:57:20.000000000 +0200
+@@ -336,14 +336,14 @@
+          This enables support for Philips PNX4008 mobile platform.
+ 
+ config ARCH_PXA
+-       bool "PXA2xx-based"
++       bool "PXA2xx/PXA3xx-based"
+        depends on MMU
+        select ARCH_MTD_XIP
+        select GENERIC_GPIO
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        help
+-         Support for Intel's PXA2XX processor line.
++         Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+ 
+ config ARCH_RPC
+        bool "RiscPC"
+@@ -486,7 +486,7 @@
+ config IWMMXT
+        bool "Enable iWMMXt support"
+        depends on CPU_XSCALE || CPU_XSC3
+-       default y if PXA27x
++       default y if PXA27x || PXA3xx
+        help
+          Enable support for iWMMXt context switching at run time if
+          running on a CPU that supports it.
+Index: linux-2.6.22/arch/arm/boot/compressed/head-xscale.S
+===================================================================
+--- linux-2.6.22.orig/arch/arm/boot/compressed/head-xscale.S    2007-09-24 20:56:50.000000000 +0200
++++ linux-2.6.22/arch/arm/boot/compressed/head-xscale.S 2007-09-24 21:03:05.000000000 +0200
+@@ -33,10 +33,6 @@
+                bic     r0, r0, #0x1000         @ clear Icache
+                mcr     p15, 0, r0, c1, c0, 0
+ 
+-#ifdef CONFIG_ARCH_LUBBOCK
+-               mov     r7, #MACH_TYPE_LUBBOCK
+-#endif
+-
+ #ifdef CONFIG_ARCH_COTULLA_IDP
+                mov     r7, #MACH_TYPE_COTULLA_IDP
+ #endif
+Index: linux-2.6.22/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/Kconfig 2007-09-24 20:57:20.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/Kconfig      2007-09-24 20:57:20.000000000 +0200
+@@ -1,6 +1,24 @@
+ if ARCH_PXA
+ 
+-menu "Intel PXA2xx Implementations"
++menu "Intel PXA2xx/PXA3xx Implementations"
++
++if PXA3xx
++
++menu "Supported PXA3xx Processor Variants"
++
++config CPU_PXA300
++       bool "PXA300 (codename Monahans-L)"
++
++config CPU_PXA310
++       bool "PXA310 (codename Monahans-LV)"
++       select CPU_PXA300
++
++config CPU_PXA320
++       bool "PXA320 (codename Monahans-P)"
++
++endmenu
++
++endif
+ 
+ choice
+        prompt "Select target board"
+@@ -41,6 +59,11 @@
+        bool "CompuLab EM-x270 platform"
+        select PXA27x
+ 
++
++config MACH_ZYLONITE
++       bool "PXA3xx Development Platform"
++       select PXA3xx
++
+ config MACH_HX2750
+        bool "HP iPAQ hx2750"
+        select PXA27x
+@@ -228,6 +251,11 @@
+        help
+          Select code specific to PXA27x variants
+ 
++config PXA3xx
++       bool
++       help
++         Select code specific to PXA3xx variants
++
+ config PXA_SHARP_C7xx
+        bool
+        select PXA_SSP
+Index: linux-2.6.22/arch/arm/mach-pxa/Makefile
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/Makefile        2007-09-24 20:57:20.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/Makefile     2007-09-24 21:03:57.000000000 +0200
+@@ -6,6 +6,9 @@
+ obj-y += clock.o generic.o irq.o dma.o time.o
+ obj-$(CONFIG_PXA25x) += pxa25x.o
+ obj-$(CONFIG_PXA27x) += pxa27x.o
++obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o
++obj-$(CONFIG_CPU_PXA300)       += pxa300.o
++obj-$(CONFIG_CPU_PXA320)       += pxa320.o
+ 
+ # Specific board support
+ obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
+@@ -19,6 +22,12 @@
+ obj-$(CONFIG_MACH_POODLE)      += poodle.o corgi_ssp.o sharpsl_pm.o poodle_pm.o
+ obj-$(CONFIG_MACH_TOSA)         += tosa.o
+ obj-$(CONFIG_MACH_EM_X270) += em-x270.o
++ifeq ($(CONFIG_MACH_ZYLONITE),y)
++   obj-y                       += zylonite.o
++   obj-$(CONFIG_CPU_PXA300)    += zylonite_pxa300.o
++   obj-$(CONFIG_CPU_PXA320)    += zylonite_pxa320.o
++endif
++
+ obj-$(CONFIG_MACH_HX2750)      += hx2750.o hx2750_test.o
+ obj-$(CONFIG_MACH_HTCUNIVERSAL) += htcuniversal/
+ 
+Index: linux-2.6.22/arch/arm/mach-pxa/clock.c
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/clock.c 2007-09-24 20:56:51.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/clock.c      2007-09-24 20:57:20.000000000 +0200
+@@ -9,19 +9,15 @@
+ #include <linux/string.h>
+ #include <linux/clk.h>
+ #include <linux/spinlock.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
+ 
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/hardware.h>
+ 
+-struct clk {
+-       struct list_head        node;
+-       unsigned long           rate;
+-       struct module           *owner;
+-       const char              *name;
+-       unsigned int            enabled;
+-       void                    (*enable)(void);
+-       void                    (*disable)(void);
+-};
++#include "devices.h"
++#include "generic.h"
++#include "clock.h"
+ 
+ static LIST_HEAD(clocks);
+ static DEFINE_MUTEX(clocks_mutex);
+@@ -33,7 +29,8 @@
+ 
+        mutex_lock(&clocks_mutex);
+        list_for_each_entry(p, &clocks, node) {
+-               if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
++               if (strcmp(id, p->name) == 0 &&
++                   (p->dev == NULL || p->dev == dev)) {
+                        clk = p;
+                        break;
+                }
+@@ -46,7 +43,6 @@
+ 
+ void clk_put(struct clk *clk)
+ {
+-       module_put(clk->owner);
+ }
+ EXPORT_SYMBOL(clk_put);
+ 
+@@ -56,8 +52,12 @@
+ 
+        spin_lock_irqsave(&clocks_lock, flags);
+        if (clk->enabled++ == 0)
+-               clk->enable();
++               clk->ops->enable(clk);
+        spin_unlock_irqrestore(&clocks_lock, flags);
++
++       if (clk->delay)
++               udelay(clk->delay);
++
+        return 0;
+ }
+ EXPORT_SYMBOL(clk_enable);
+@@ -70,54 +70,75 @@
+ 
+        spin_lock_irqsave(&clocks_lock, flags);
+        if (--clk->enabled == 0)
+-               clk->disable();
++               clk->ops->disable(clk);
+        spin_unlock_irqrestore(&clocks_lock, flags);
+ }
+ EXPORT_SYMBOL(clk_disable);
+ 
+ unsigned long clk_get_rate(struct clk *clk)
+ {
+-       return clk->rate;
++       unsigned long rate;
++
++       rate = clk->rate;
++       if (clk->ops->getrate)
++               rate = clk->ops->getrate(clk);
++
++       return rate;
+ }
+ EXPORT_SYMBOL(clk_get_rate);
+ 
+ 
+-static void clk_gpio27_enable(void)
++static void clk_gpio27_enable(struct clk *clk)
+ {
+        pxa_gpio_mode(GPIO11_3_6MHz_MD);
+ }
+ 
+-static void clk_gpio27_disable(void)
++static void clk_gpio27_disable(struct clk *clk)
+ {
+ }
+ 
+-static struct clk clk_gpio27 = {
+-       .name           = "GPIO27_CLK",
+-       .rate           = 3686400,
++static const struct clkops clk_gpio27_ops = {
+        .enable         = clk_gpio27_enable,
+        .disable        = clk_gpio27_disable,
+ };
+ 
+-int clk_register(struct clk *clk)
++
++void clk_cken_enable(struct clk *clk)
+ {
+-       mutex_lock(&clocks_mutex);
+-       list_add(&clk->node, &clocks);
+-       mutex_unlock(&clocks_mutex);
+-       return 0;
++       CKEN |= 1 << clk->cken;
+ }
+-EXPORT_SYMBOL(clk_register);
+ 
+-void clk_unregister(struct clk *clk)
++void clk_cken_disable(struct clk *clk)
+ {
++       CKEN &= ~(1 << clk->cken);
++}
++
++const struct clkops clk_cken_ops = {
++       .enable         = clk_cken_enable,
++       .disable        = clk_cken_disable,
++};
++
++static struct clk common_clks[] = {
++       {
++               .name           = "GPIO27_CLK",
++               .ops            = &clk_gpio27_ops,
++               .rate           = 3686400,
++       },
++};
++
++void clks_register(struct clk *clks, size_t num)
++{
++       int i;
++
+        mutex_lock(&clocks_mutex);
+-       list_del(&clk->node);
++       for (i = 0; i < num; i++)
++               list_add(&clks[i].node, &clocks);
+        mutex_unlock(&clocks_mutex);
+ }
+-EXPORT_SYMBOL(clk_unregister);
+ 
+ static int __init clk_init(void)
+ {
+-       clk_register(&clk_gpio27);
++       clks_register(common_clks, ARRAY_SIZE(common_clks));
+        return 0;
+ }
+ arch_initcall(clk_init);
+Index: linux-2.6.22/arch/arm/mach-pxa/clock.h
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/arch/arm/mach-pxa/clock.h      2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,43 @@
++struct clk;
++
++struct clkops {
++       void                    (*enable)(struct clk *);
++       void                    (*disable)(struct clk *);
++       unsigned long           (*getrate)(struct clk *);
++};
++
++struct clk {
++       struct list_head        node;
++       const char              *name;
++       struct device           *dev;
++       const struct clkops     *ops;
++       unsigned long           rate;
++       unsigned int            cken;
++       unsigned int            delay;
++       unsigned int            enabled;
++};
++
++#define INIT_CKEN(_name, _cken, _rate, _delay, _dev)   \
++       {                                               \
++               .name   = _name,                        \
++               .dev    = _dev,                         \
++               .ops    = &clk_cken_ops,                \
++               .rate   = _rate,                        \
++               .cken   = CKEN_##_cken,                 \
++               .delay  = _delay,                       \
++       }
++
++#define INIT_CK(_name, _cken, _ops, _dev)              \
++       {                                               \
++               .name   = _name,                        \
++               .dev    = _dev,                         \
++               .ops    = _ops,                         \
++               .cken   = CKEN_##_cken,                 \
++       }
++
++extern const struct clkops clk_cken_ops;
++
++void clk_cken_enable(struct clk *clk);
++void clk_cken_disable(struct clk *clk);
++
++void clks_register(struct clk *clks, size_t num);
+Index: linux-2.6.22/arch/arm/mach-pxa/devices.h
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/devices.h       2007-09-24 20:56:51.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/devices.h    2007-09-24 20:57:20.000000000 +0200
+@@ -9,3 +9,6 @@
+ extern struct platform_device pxa_device_i2s;
+ extern struct platform_device pxa_device_ficp;
+ extern struct platform_device pxa_device_rtc;
++
++extern struct platform_device pxa27x_device_i2c_power;
++extern struct platform_device pxa27x_device_ohci;
+Index: linux-2.6.22/arch/arm/mach-pxa/generic.c
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/generic.c       2007-09-24 20:57:20.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/generic.c    2007-09-24 20:57:20.000000000 +0200
+@@ -25,10 +25,6 @@
+ #include <linux/pm.h>
+ #include <linux/string.h>
+ 
+-#include <linux/sched.h>
+-#include <asm/cnt32_to_63.h>
+-#include <asm/div64.h>
+-
+ #include <asm/hardware.h>
+ #include <asm/irq.h>
+ #include <asm/system.h>
+@@ -48,66 +44,39 @@
+ #include "generic.h"
+ 
+ /*
+- * This is the PXA2xx sched_clock implementation. This has a resolution
+- * of at least 308ns and a maximum value that depends on the value of
+- * CLOCK_TICK_RATE.
+- *
+- * The return value is guaranteed to be monotonic in that range as
+- * long as there is always less than 582 seconds between successive
+- * calls to this function.
++ * Get the clock frequency as reflected by CCCR and the turbo flag.
++ * We assume these values have been applied via a fcs.
++ * If info is not 0 we also display the current settings.
+  */
+-unsigned long long sched_clock(void)
++unsigned int get_clk_frequency_khz(int info)
+ {
+-       unsigned long long v = cnt32_to_63(OSCR);
+-       /* Note: top bit ov v needs cleared unless multiplier is even. */
+-
+-#if    CLOCK_TICK_RATE == 3686400
+-       /* 1E9 / 3686400 => 78125 / 288, max value = 32025597s (370 days). */
+-       /* The <<1 is used to get rid of tick.hi top bit */
+-       v *= 78125<<1;
+-       do_div(v, 288<<1);
+-#elif  CLOCK_TICK_RATE == 3250000
+-       /* 1E9 / 3250000 => 4000 / 13, max value = 709490156s (8211 days) */
+-       v *= 4000;
+-       do_div(v, 13);
+-#elif  CLOCK_TICK_RATE == 3249600
+-       /* 1E9 / 3249600 => 625000 / 2031, max value = 4541295s (52 days) */
+-       v *= 625000;
+-       do_div(v, 2031);
+-#else
+-#warning "consider fixing sched_clock for your value of CLOCK_TICK_RATE"
+-       /*
+-        * 96-bit math to perform tick * NSEC_PER_SEC / CLOCK_TICK_RATE for
+-        * any value of CLOCK_TICK_RATE. Max value is in the 80 thousand
+-        * years range and truncation to unsigned long long limits it to
+-        * sched_clock's max range of ~584 years.  This is nice but with
+-        * higher computation cost.
+-        */
+-       {
+-               union {
+-                       unsigned long long val;
+-                       struct { unsigned long lo, hi; };
+-               } x;
+-               unsigned long long y;
+-
+-               x.val = v;
+-               x.hi &= 0x7fffffff;
+-               y = (unsigned long long)x.lo * NSEC_PER_SEC;
+-               x.lo = y;
+-               y = (y >> 32) + (unsigned long long)x.hi * NSEC_PER_SEC;
+-               x.hi = do_div(y, CLOCK_TICK_RATE);
+-               do_div(x.val, CLOCK_TICK_RATE);
+-               x.hi += y;
+-               v = x.val;
+-       }
+-#endif
++       if (cpu_is_pxa21x() || cpu_is_pxa25x())
++               return pxa25x_get_clk_frequency_khz(info);
++       else if (cpu_is_pxa27x())
++               return pxa27x_get_clk_frequency_khz(info);
++       else
++               return pxa3xx_get_clk_frequency_khz(info);
++}
++EXPORT_SYMBOL(get_clk_frequency_khz);
+ 
+-       return v;
++/*
++ * Return the current memory clock frequency in units of 10kHz
++ */
++unsigned int get_memclk_frequency_10khz(void)
++{
++       if (cpu_is_pxa21x() || cpu_is_pxa25x())
++               return pxa25x_get_memclk_frequency_10khz();
++       else if (cpu_is_pxa27x())
++               return pxa27x_get_memclk_frequency_10khz();
++       else
++               return pxa3xx_get_memclk_frequency_10khz();
+ }
++EXPORT_SYMBOL(get_memclk_frequency_10khz);
+ 
+ /*
+  * Handy function to set GPIO alternate functions
+  */
++int pxa_last_gpio;
+ 
+ int pxa_gpio_mode(int gpio_mode)
+ {
+@@ -116,7 +85,7 @@
+        int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
+        int gafr;
+ 
+-       if (gpio > PXA_LAST_GPIO)
++       if (gpio > pxa_last_gpio)
+                return -EINVAL;
+ 
+        local_irq_save(flags);
+@@ -160,7 +129,7 @@
+ /*
+  * Routine to safely enable or disable a clock in the CKEN
+  */
+-void pxa_set_cken(int clock, int enable)
++void __pxa_set_cken(int clock, int enable)
+ {
+        unsigned long flags;
+        local_irq_save(flags);
+@@ -173,7 +142,7 @@
+        local_irq_restore(flags);
+ }
+ 
+-EXPORT_SYMBOL(pxa_set_cken);
++EXPORT_SYMBOL(__pxa_set_cken);
+ 
+ /*
+  * Intel PXA2xx internal register mapping.
+@@ -330,21 +299,80 @@
+        pxa_device_fb.dev.parent = parent_dev;
+ }
+ 
++static struct resource pxa_resource_ffuart[] = {
++       {
++               .start  = __PREG(FFUART),
++               .end    = __PREG(FFUART) + 35,
++               .flags  = IORESOURCE_MEM,
++       }, {
++               .start  = IRQ_FFUART,
++               .end    = IRQ_FFUART,
++               .flags  = IORESOURCE_IRQ,
++       }
++};
++
+ struct platform_device pxa_device_ffuart= {
+        .name           = "pxa2xx-uart",
+        .id             = 0,
++       .resource       = pxa_resource_ffuart,
++       .num_resources  = ARRAY_SIZE(pxa_resource_ffuart),
++};
++
++static struct resource pxa_resource_btuart[] = {
++       {
++               .start  = __PREG(BTUART),
++               .end    = __PREG(BTUART) + 35,
++               .flags  = IORESOURCE_MEM,
++       }, {
++               .start  = IRQ_BTUART,
++               .end    = IRQ_BTUART,
++               .flags  = IORESOURCE_IRQ,
++       }
+ };
++
+ struct platform_device pxa_device_btuart = {
+        .name           = "pxa2xx-uart",
+        .id             = 1,
++       .resource       = pxa_resource_btuart,
++       .num_resources  = ARRAY_SIZE(pxa_resource_btuart),
+ };
++
++static struct resource pxa_resource_stuart[] = {
++       {
++               .start  = __PREG(STUART),
++               .end    = __PREG(STUART) + 35,
++               .flags  = IORESOURCE_MEM,
++       }, {
++               .start  = IRQ_STUART,
++               .end    = IRQ_STUART,
++               .flags  = IORESOURCE_IRQ,
++       }
++};
++
+ struct platform_device pxa_device_stuart = {
+        .name           = "pxa2xx-uart",
+        .id             = 2,
++       .resource       = pxa_resource_stuart,
++       .num_resources  = ARRAY_SIZE(pxa_resource_stuart),
++};
++
++static struct resource pxa_resource_hwuart[] = {
++       {
++               .start  = __PREG(HWUART),
++               .end    = __PREG(HWUART) + 47,
++               .flags  = IORESOURCE_MEM,
++       }, {
++               .start  = IRQ_HWUART,
++               .end    = IRQ_HWUART,
++               .flags  = IORESOURCE_IRQ,
++       }
+ };
++
+ struct platform_device pxa_device_hwuart = {
+        .name           = "pxa2xx-uart",
+        .id             = 3,
++       .resource       = pxa_resource_hwuart,
++       .num_resources  = ARRAY_SIZE(pxa_resource_hwuart),
+ };
+ 
+ void __init pxa_set_ffuart_info(struct platform_pxa_serial_funcs *info)
+Index: linux-2.6.22/arch/arm/mach-pxa/generic.h
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/generic.h       2007-09-24 20:56:51.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/generic.h    2007-09-24 20:57:20.000000000 +0200
+@@ -15,14 +15,40 @@
+ extern void __init pxa_init_irq_low(void);
+ extern void __init pxa_init_irq_high(void);
+ extern void __init pxa_init_irq_gpio(int gpio_nr);
++extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
+ extern void __init pxa25x_init_irq(void);
+ extern void __init pxa27x_init_irq(void);
++extern void __init pxa3xx_init_irq(void);
+ extern void __init pxa_map_io(void);
+ 
+ extern unsigned int get_clk_frequency_khz(int info);
++extern int pxa_last_gpio;
+ 
+ #define SET_BANK(__nr,__start,__size) \
+        mi->bank[__nr].start = (__start), \
+        mi->bank[__nr].size = (__size), \
+        mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
+ 
++#ifdef CONFIG_PXA25x
++extern unsigned pxa25x_get_clk_frequency_khz(int);
++extern unsigned pxa25x_get_memclk_frequency_10khz(void);
++#else
++#define pxa25x_get_clk_frequency_khz(x)                (0)
++#define pxa25x_get_memclk_frequency_10khz()    (0)
++#endif
++
++#ifdef CONFIG_PXA27x
++extern unsigned pxa27x_get_clk_frequency_khz(int);
++extern unsigned pxa27x_get_memclk_frequency_10khz(void);
++#else
++#define pxa27x_get_clk_frequency_khz(x)                (0)
++#define pxa27x_get_memclk_frequency_10khz()    (0)
++#endif
++
++#ifdef CONFIG_PXA3xx
++extern unsigned pxa3xx_get_clk_frequency_khz(int);
++extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
++#else
++#define pxa3xx_get_clk_frequency_khz(x)                (0)
++#define pxa3xx_get_memclk_frequency_10khz()    (0)
++#endif
+Index: linux-2.6.22/arch/arm/mach-pxa/irq.c
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/irq.c   2007-09-24 20:56:51.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/irq.c        2007-09-24 20:57:20.000000000 +0200
+@@ -38,33 +38,11 @@
+        ICMR |= (1 << irq);
+ }
+ 
+-static int pxa_set_wake(unsigned int irq, unsigned int on)
+-{
+-       u32     mask;
+-
+-       switch (irq) {
+-       case IRQ_RTCAlrm:
+-               mask = PWER_RTC;
+-               break;
+-#ifdef CONFIG_PXA27x
+-       /* REVISIT can handle USBH1, USBH2, USB, MSL, USIM, ... */
+-#endif
+-       default:
+-               return -EINVAL;
+-       }
+-       if (on)
+-               PWER |= mask;
+-       else
+-               PWER &= ~mask;
+-       return 0;
+-}
+-
+ static struct irq_chip pxa_internal_chip_low = {
+        .name           = "SC",
+        .ack            = pxa_mask_low_irq,
+        .mask           = pxa_mask_low_irq,
+        .unmask         = pxa_unmask_low_irq,
+-       .set_wake       = pxa_set_wake,
+ };
+ 
+ void __init pxa_init_irq_low(void)
+@@ -87,7 +65,7 @@
+        }
+ }
+ 
+-#ifdef CONFIG_PXA27x
++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+ 
+ /*
+  * This is for the second set of internal IRQs as found on the PXA27x.
+@@ -125,26 +103,6 @@
+ }
+ #endif
+ 
+-/* Note that if an input/irq line ever gets changed to an output during
+- * suspend, the relevant PWER, PRER, and PFER bits should be cleared.
+- */
+-#ifdef CONFIG_PXA27x
+-
+-/* PXA27x:  Various gpios can issue wakeup events.  This logic only
+- * handles the simple cases, not the WEMUX2 and WEMUX3 options
+- */
+-#define PXA27x_GPIO_NOWAKE_MASK \
+-       ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
+-#define        WAKEMASK(gpio) \
+-       (((gpio) <= 15) \
+-               ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
+-               : ((gpio == 35) ? (1 << 24) : 0))
+-#else
+-
+-/* pxa 210, 250, 255, 26x:  gpios 0..15 can issue wakeups */
+-#define        WAKEMASK(gpio) (((gpio) <= 15) ? (1 << (gpio)) : 0)
+-#endif
+-
+ /*
+  * PXA GPIO edge detection for IRQs:
+  * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+@@ -158,11 +116,9 @@
+ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
+ {
+        int gpio, idx;
+-       u32 mask;
+ 
+        gpio = IRQ_TO_GPIO(irq);
+        idx = gpio >> 5;
+-       mask = WAKEMASK(gpio);
+ 
+        if (type == IRQT_PROBE) {
+            /* Don't mess with enabled GPIOs using preconfigured edges or
+@@ -182,19 +138,15 @@
+        if (type & __IRQT_RISEDGE) {
+                /* printk("rising "); */
+                __set_bit (gpio, GPIO_IRQ_rising_edge);
+-               PRER |= mask;
+        } else {
+                __clear_bit (gpio, GPIO_IRQ_rising_edge);
+-               PRER &= ~mask;
+        }
+ 
+        if (type & __IRQT_FALEDGE) {
+                /* printk("falling "); */
+                __set_bit (gpio, GPIO_IRQ_falling_edge);
+-               PFER |= mask;
+        } else {
+                __clear_bit (gpio, GPIO_IRQ_falling_edge);
+-               PFER &= ~mask;
+        }
+ 
+        /* printk("edges\n"); */
+@@ -213,29 +165,12 @@
+        GEDR0 = (1 << (irq - IRQ_GPIO0));
+ }
+ 
+-static int pxa_set_gpio_wake(unsigned int irq, unsigned int on)
+-{
+-       int     gpio = IRQ_TO_GPIO(irq);
+-       u32     mask = WAKEMASK(gpio);
+-
+-       if (!mask)
+-               return -EINVAL;
+-
+-       if (on)
+-               PWER |= mask;
+-       else
+-               PWER &= ~mask;
+-       return 0;
+-}
+-
+-
+ static struct irq_chip pxa_low_gpio_chip = {
+        .name           = "GPIO-l",
+        .ack            = pxa_ack_low_gpio,
+        .mask           = pxa_mask_low_irq,
+        .unmask         = pxa_unmask_low_irq,
+        .set_type       = pxa_gpio_irq_type,
+-       .set_wake       = pxa_set_gpio_wake,
+ };
+ 
+ /*
+@@ -342,13 +277,14 @@
+        .mask           = pxa_mask_muxed_gpio,
+        .unmask         = pxa_unmask_muxed_gpio,
+        .set_type       = pxa_gpio_irq_type,
+-       .set_wake       = pxa_set_gpio_wake,
+ };
+ 
+ void __init pxa_init_irq_gpio(int gpio_nr)
+ {
+        int irq, i;
+ 
++       pxa_last_gpio = gpio_nr - 1;
++
+        /* clear all GPIO edge detects */
+        for (i = 0; i < gpio_nr; i += 32) {
+                GFER(i) = 0;
+@@ -375,3 +311,13 @@
+        set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
+        set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
+ }
++
++void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
++{
++       pxa_internal_chip_low.set_wake = set_wake;
++#ifdef CONFIG_PXA27x
++       pxa_internal_chip_high.set_wake = set_wake;
++#endif
++       pxa_low_gpio_chip.set_wake = set_wake;
++       pxa_muxed_gpio_chip.set_wake = set_wake;
++}
+Index: linux-2.6.22/arch/arm/mach-pxa/mfp.c
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/arch/arm/mach-pxa/mfp.c        2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,235 @@
++/*
++ * linux/arch/arm/mach-pxa/mfp.c
++ *
++ * PXA3xx Multi-Function Pin Support
++ *
++ * Copyright (C) 2007 Marvell Internation Ltd.
++ *
++ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
++ *             initial version
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/mfp.h>
++
++/* mfp_spin_lock is used to ensure that MFP register configuration
++ * (most likely a read-modify-write operation) is atomic, and that
++ * mfp_table[] is consistent
++ */
++static DEFINE_SPINLOCK(mfp_spin_lock);
++
++static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
++static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
++
++#define mfpr_readl(off)                        \
++       __raw_readl(mfpr_mmio_base + (off))
++
++#define mfpr_writel(off, val)          \
++       __raw_writel(val, mfpr_mmio_base + (off))
++
++/*
++ * perform a read-back of any MFPR register to make sure the
++ * previous writings are finished
++ */
++#define mfpr_sync()    (void)__raw_readl(mfpr_mmio_base + 0)
++
++static inline void __mfp_config(int pin, unsigned long val)
++{
++       unsigned long off = mfp_table[pin].mfpr_off;
++
++       mfp_table[pin].mfpr_val = val;
++       mfpr_writel(off, val);
++}
++
++void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num)
++{
++       int i, pin;
++       unsigned long val, flags;
++       mfp_cfg_t *mfp_cfg = mfp_cfgs;
++
++       spin_lock_irqsave(&mfp_spin_lock, flags);
++
++       for (i = 0; i < num; i++, mfp_cfg++) {
++               pin = MFP_CFG_PIN(*mfp_cfg);
++               val = MFP_CFG_VAL(*mfp_cfg);
++
++               BUG_ON(pin >= MFP_PIN_MAX);
++
++               __mfp_config(pin, val);
++       }
++
++       mfpr_sync();
++       spin_unlock_irqrestore(&mfp_spin_lock, flags);
++}
++
++unsigned long pxa3xx_mfp_read(int mfp)
++{
++       unsigned long val, flags;
++
++       BUG_ON(mfp >= MFP_PIN_MAX);
++
++       spin_lock_irqsave(&mfp_spin_lock, flags);
++       val = mfpr_readl(mfp_table[mfp].mfpr_off);
++       spin_unlock_irqrestore(&mfp_spin_lock, flags);
++
++       return val;
++}
++
++void pxa3xx_mfp_write(int mfp, unsigned long val)
++{
++       unsigned long flags;
++
++       BUG_ON(mfp >= MFP_PIN_MAX);
++
++       spin_lock_irqsave(&mfp_spin_lock, flags);
++       mfpr_writel(mfp_table[mfp].mfpr_off, val);
++       mfpr_sync();
++       spin_unlock_irqrestore(&mfp_spin_lock, flags);
++}
++
++void pxa3xx_mfp_set_afds(int mfp, int af, int ds)
++{
++       uint32_t mfpr_off, mfpr_val;
++       unsigned long flags;
++
++       BUG_ON(mfp >= MFP_PIN_MAX);
++
++       spin_lock_irqsave(&mfp_spin_lock, flags);
++       mfpr_off = mfp_table[mfp].mfpr_off;
++
++       mfpr_val = mfpr_readl(mfpr_off);
++       mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK);
++       mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) |
++                    ((ds & 0x7) << MFPR_DRV_OFFSET));
++
++       mfpr_writel(mfpr_off, mfpr_val);
++       mfpr_sync();
++
++       spin_unlock_irqrestore(&mfp_spin_lock, flags);
++}
++
++void pxa3xx_mfp_set_rdh(int mfp, int rdh)
++{
++       uint32_t mfpr_off, mfpr_val;
++       unsigned long flags;
++
++       BUG_ON(mfp >= MFP_PIN_MAX);
++
++       spin_lock_irqsave(&mfp_spin_lock, flags);
++
++       mfpr_off = mfp_table[mfp].mfpr_off;
++
++       mfpr_val = mfpr_readl(mfpr_off);
++       mfpr_val &= ~MFPR_RDH_MASK;
++
++       if (likely(rdh))
++               mfpr_val |= (1u << MFPR_SS_OFFSET);
++
++       mfpr_writel(mfpr_off, mfpr_val);
++       mfpr_sync();
++
++       spin_unlock_irqrestore(&mfp_spin_lock, flags);
++}
++
++void pxa3xx_mfp_set_lpm(int mfp, int lpm)
++{
++       uint32_t mfpr_off, mfpr_val;
++       unsigned long flags;
++
++       BUG_ON(mfp >= MFP_PIN_MAX);
++
++       spin_lock_irqsave(&mfp_spin_lock, flags);
++
++       mfpr_off = mfp_table[mfp].mfpr_off;
++       mfpr_val = mfpr_readl(mfpr_off);
++       mfpr_val &= ~MFPR_LPM_MASK;
++
++       if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET;
++       if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET;
++       if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET;
++       if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET;
++       if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET;
++
++       mfpr_writel(mfpr_off, mfpr_val);
++       mfpr_sync();
++
++       spin_unlock_irqrestore(&mfp_spin_lock, flags);
++}
++
++void pxa3xx_mfp_set_pull(int mfp, int pull)
++{
++       uint32_t mfpr_off, mfpr_val;
++       unsigned long flags;
++
++       BUG_ON(mfp >= MFP_PIN_MAX);
++
++       spin_lock_irqsave(&mfp_spin_lock, flags);
++
++       mfpr_off = mfp_table[mfp].mfpr_off;
++       mfpr_val = mfpr_readl(mfpr_off);
++       mfpr_val &= ~MFPR_PULL_MASK;
++       mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET);
++
++       mfpr_writel(mfpr_off, mfpr_val);
++       mfpr_sync();
++
++       spin_unlock_irqrestore(&mfp_spin_lock, flags);
++}
++
++void pxa3xx_mfp_set_edge(int mfp, int edge)
++{
++       uint32_t mfpr_off, mfpr_val;
++       unsigned long flags;
++
++       BUG_ON(mfp >= MFP_PIN_MAX);
++
++       spin_lock_irqsave(&mfp_spin_lock, flags);
++
++       mfpr_off = mfp_table[mfp].mfpr_off;
++       mfpr_val = mfpr_readl(mfpr_off);
++
++       mfpr_val &= ~MFPR_EDGE_MASK;
++       mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET;
++       mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET;
++
++       mfpr_writel(mfpr_off, mfpr_val);
++       mfpr_sync();
++
++       spin_unlock_irqrestore(&mfp_spin_lock, flags);
++}
++
++void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
++{
++       struct pxa3xx_mfp_addr_map *p;
++       unsigned long offset, flags;
++       int i;
++
++       spin_lock_irqsave(&mfp_spin_lock, flags);
++
++       for (p = map; p->start != MFP_PIN_INVALID; p++) {
++               offset = p->offset;
++               i = p->start;
++
++               do {
++                       mfp_table[i].mfpr_off = offset;
++                       mfp_table[i].mfpr_val = 0;
++                       offset += 4; i++;
++               } while ((i <= p->end) && (p->end != -1));
++       }
++
++       spin_unlock_irqrestore(&mfp_spin_lock, flags);
++}
++
++void __init pxa3xx_init_mfp(void)
++{
++       memset(mfp_table, 0, sizeof(mfp_table));
++}
+Index: linux-2.6.22/arch/arm/mach-pxa/pxa25x.c
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/pxa25x.c        2007-09-24 20:57:15.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/pxa25x.c     2007-09-24 20:57:20.000000000 +0200
+@@ -30,6 +30,7 @@
+ 
+ #include "generic.h"
+ #include "devices.h"
++#include "clock.h"
+ 
+ /*
+  * Various clock factors driven by the CCCR register.
+@@ -53,7 +54,7 @@
+  * We assume these values have been applied via a fcs.
+  * If info is not 0 we also display the current settings.
+  */
+-unsigned int get_clk_frequency_khz(int info)
++unsigned int pxa25x_get_clk_frequency_khz(int info)
+ {
+        unsigned long cccr, turbo;
+        unsigned int l, L, m, M, n2, N;
+@@ -86,27 +87,48 @@
+        return (turbo & 1) ? (N/1000) : (M/1000);
+ }
+ 
+-EXPORT_SYMBOL(get_clk_frequency_khz);
+-
+ /*
+  * Return the current memory clock frequency in units of 10kHz
+  */
+-unsigned int get_memclk_frequency_10khz(void)
++unsigned int pxa25x_get_memclk_frequency_10khz(void)
+ {
+        return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000;
+ }
+ 
+-EXPORT_SYMBOL(get_memclk_frequency_10khz);
+-
+-/*
+- * Return the current LCD clock frequency in units of 10kHz
+- */
+-unsigned int get_lcdclk_frequency_10khz(void)
++static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk)
+ {
+-       return get_memclk_frequency_10khz();
++       return pxa25x_get_memclk_frequency_10khz() * 10000;
+ }
+ 
+-EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
++static const struct clkops clk_pxa25x_lcd_ops = {
++       .enable         = clk_cken_enable,
++       .disable        = clk_cken_disable,
++       .getrate        = clk_pxa25x_lcd_getrate,
++};
++
++/*
++ * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
++ * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
++ * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
++ */
++static struct clk pxa25x_clks[] = {
++       INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
++       INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
++       INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
++       INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
++       INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
++       INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
++       INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
++       INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
++       /*
++       INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
++       INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
++       INIT_CKEN("SSPCLK",  SSP,  3686400,  0, NULL),
++       INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
++       INIT_CKEN("NSSPCLK", NSSP, 3686400,  0, NULL),
++       */
++       INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
++};
+ 
+ #ifdef CONFIG_PM
+ 
+@@ -207,10 +229,52 @@
+ }
+ #endif
+ 
++/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
++ */
++
++static int pxa25x_set_wake(unsigned int irq, unsigned int on)
++{
++       int gpio = IRQ_TO_GPIO(irq);
++       uint32_t gpio_bit, mask = 0;
++
++       if (gpio >= 0 && gpio <= 15) {
++               gpio_bit = GPIO_bit(gpio);
++               mask = gpio_bit;
++               if (on) {
++                       if (GRER(gpio) | gpio_bit)
++                               PRER |= gpio_bit;
++                       else
++                               PRER &= ~gpio_bit;
++
++                       if (GFER(gpio) | gpio_bit)
++                               PFER |= gpio_bit;
++                       else
++                               PFER &= ~gpio_bit;
++               }
++               goto set_pwer;
++       }
++
++       if (irq == IRQ_RTCAlrm) {
++               mask = PWER_RTC;
++               goto set_pwer;
++       }
++
++       return -EINVAL;
++
++set_pwer:
++       if (on)
++               PWER |= mask;
++       else
++               PWER &=~mask;
++
++       return 0;
++}
++
+ void __init pxa25x_init_irq(void)
+ {
+        pxa_init_irq_low();
+        pxa_init_irq_gpio(85);
++       pxa_init_irq_set_wake(pxa25x_set_wake);
+ }
+ 
+ static struct platform_device *pxa25x_devices[] __initdata = {
+@@ -231,6 +295,8 @@
+        int ret = 0;
+ 
+        if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
++               clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
++
+                if ((ret = pxa_init_dma(16)))
+                        return ret;
+ #ifdef CONFIG_PM
+Index: linux-2.6.22/arch/arm/mach-pxa/pxa27x.c
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/pxa27x.c        2007-09-24 20:57:15.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/pxa27x.c     2007-09-24 20:57:20.000000000 +0200
+@@ -27,6 +27,7 @@
+ 
+ #include "generic.h"
+ #include "devices.h"
++#include "clock.h"
+ 
+ /* Crystal clock: 13MHz */
+ #define BASE_CLK       13000000
+@@ -36,7 +37,7 @@
+  * We assume these values have been applied via a fcs.
+  * If info is not 0 we also display the current settings.
+  */
+-unsigned int get_clk_frequency_khz( int info)
++unsigned int pxa27x_get_clk_frequency_khz(int info)
+ {
+        unsigned long ccsr, clkcfg;
+        unsigned int l, L, m, M, n2, N, S;
+@@ -79,7 +80,7 @@
+  * Return the current mem clock frequency in units of 10kHz as
+  * reflected by CCCR[A], B, and L
+  */
+-unsigned int get_memclk_frequency_10khz(void)
++unsigned int pxa27x_get_memclk_frequency_10khz(void)
+ {
+        unsigned long ccsr, clkcfg;
+        unsigned int l, L, m, M;
+@@ -104,7 +105,7 @@
+ /*
+  * Return the current LCD clock frequency in units of 10kHz as
+  */
+-unsigned int get_lcdclk_frequency_10khz(void)
++static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
+ {
+        unsigned long ccsr;
+        unsigned int l, L, k, K;
+@@ -120,9 +121,47 @@
+        return (K / 10000);
+ }
+ 
+-EXPORT_SYMBOL(get_clk_frequency_khz);
+-EXPORT_SYMBOL(get_memclk_frequency_10khz);
+-EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
++static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
++{
++       return pxa27x_get_lcdclk_frequency_10khz() * 10000;
++}
++
++static const struct clkops clk_pxa27x_lcd_ops = {
++       .enable         = clk_cken_enable,
++       .disable        = clk_cken_disable,
++       .getrate        = clk_pxa27x_lcd_getrate,
++};
++
++static struct clk pxa27x_clks[] = {
++       INIT_CK("LCDCLK", LCD,    &clk_pxa27x_lcd_ops, &pxa_device_fb.dev),
++       INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL),
++
++       INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
++       INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
++       INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
++
++       INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
++       INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
++       INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa_device_udc.dev),
++       INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
++       INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
++
++       INIT_CKEN("USBCLK", USB,    48000000, 0, &pxa27x_device_ohci.dev),
++       INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
++       INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
++
++       /*
++       INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
++       INIT_CKEN("SSPCLK",  SSP1, 13000000, 0, NULL),
++       INIT_CKEN("SSPCLK",  SSP2, 13000000, 0, NULL),
++       INIT_CKEN("SSPCLK",  SSP3, 13000000, 0, NULL),
++       INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
++       INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
++       INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
++       INIT_CKEN("IMCLK",   IM,   0, 0, NULL),
++       INIT_CKEN("MEMCLK",  MEMC, 0, 0, NULL),
++       */
++};
+ 
+ #ifdef CONFIG_PM
+ 
+@@ -269,6 +308,69 @@
+ }
+ #endif
+ 
++/* PXA27x:  Various gpios can issue wakeup events.  This logic only
++ * handles the simple cases, not the WEMUX2 and WEMUX3 options
++ */
++#define PXA27x_GPIO_NOWAKE_MASK \
++        ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
++#define WAKEMASK(gpio) \
++        (((gpio) <= 15) \
++                 ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
++                 : ((gpio == 35) ? (1 << 24) : 0))
++
++static int pxa27x_set_wake(unsigned int irq, unsigned int on)
++{
++       int gpio = IRQ_TO_GPIO(irq);
++       uint32_t mask;
++
++       if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) {
++               if (WAKEMASK(gpio) == 0)
++                       return -EINVAL;
++
++               mask = WAKEMASK(gpio);
++
++               if (on) {
++                       if (GRER(gpio) | GPIO_bit(gpio))
++                               PRER |= mask;
++                       else
++                               PRER &= ~mask;
++
++                       if (GFER(gpio) | GPIO_bit(gpio))
++                               PFER |= mask;
++                       else
++                               PFER &= ~mask;
++               }
++               goto set_pwer;
++       }
++
++       switch (irq) {
++       case IRQ_RTCAlrm:
++               mask = PWER_RTC;
++               break;
++       case IRQ_USB:
++               mask = 1u << 26;
++               break;
++       default:
++               return -EINVAL;
++       }
++
++set_pwer:
++       if (on)
++               PWER |= mask;
++       else
++               PWER &=~mask;
++
++       return 0;
++}
++
++void __init pxa27x_init_irq(void)
++{
++       pxa_init_irq_low();
++       pxa_init_irq_high();
++       pxa_init_irq_gpio(128);
++       pxa_init_irq_set_wake(pxa27x_set_wake);
++}
++
+ /*
+  * device registration specific to PXA27x.
+  */
+@@ -288,7 +390,7 @@
+        },
+ };
+ 
+-static struct platform_device pxa27x_device_ohci = {
++struct platform_device pxa27x_device_ohci = {
+        .name           = "pxa27x-ohci",
+        .id             = -1,
+        .dev            = {
+@@ -316,7 +418,7 @@
+        },
+ };
+ 
+-static struct platform_device pxa27x_device_i2c_power = {
++struct platform_device pxa27x_device_i2c_power = {
+        .name           = "pxa2xx-i2c",
+        .id             = 1,
+        .resource       = i2c_power_resources,
+@@ -338,17 +440,12 @@
+        &pxa27x_device_ohci,
+ };
+ 
+-void __init pxa27x_init_irq(void)
+-{
+-       pxa_init_irq_low();
+-       pxa_init_irq_high();
+-       pxa_init_irq_gpio(128);
+-}
+-
+ static int __init pxa27x_init(void)
+ {
+        int ret = 0;
+        if (cpu_is_pxa27x()) {
++               clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
++
+                if ((ret = pxa_init_dma(32)))
+                        return ret;
+ #ifdef CONFIG_PM
+Index: linux-2.6.22/arch/arm/mach-pxa/pxa300.c
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/arch/arm/mach-pxa/pxa300.c     2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,93 @@
++/*
++ * linux/arch/arm/mach-pxa/pxa300.c
++ *
++ * Code specific to PXA300/PXA310
++ *
++ * Copyright (C) 2007 Marvell Internation Ltd.
++ *
++ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
++ *             initial version
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/mfp-pxa300.h>
++
++static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
++
++       MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
++       MFP_ADDR_X(GPIO3,   GPIO26,  0x027c),
++       MFP_ADDR_X(GPIO27,  GPIO127, 0x0400),
++       MFP_ADDR_X(GPIO0_2, GPIO6_2, 0x02ec),
++
++       MFP_ADDR(nBE0, 0x0204),
++       MFP_ADDR(nBE1, 0x0208),
++
++       MFP_ADDR(nLUA, 0x0244),
++       MFP_ADDR(nLLA, 0x0254),
++
++       MFP_ADDR(DF_CLE_nOE, 0x0240),
++       MFP_ADDR(DF_nRE_nOE, 0x0200),
++       MFP_ADDR(DF_ALE_nWE, 0x020C),
++       MFP_ADDR(DF_INT_RnB, 0x00C8),
++       MFP_ADDR(DF_nCS0, 0x0248),
++       MFP_ADDR(DF_nCS1, 0x0278),
++       MFP_ADDR(DF_nWE, 0x00CC),
++
++       MFP_ADDR(DF_ADDR0, 0x0210),
++       MFP_ADDR(DF_ADDR1, 0x0214),
++       MFP_ADDR(DF_ADDR2, 0x0218),
++       MFP_ADDR(DF_ADDR3, 0x021C),
++
++       MFP_ADDR(DF_IO0, 0x0220),
++       MFP_ADDR(DF_IO1, 0x0228),
++       MFP_ADDR(DF_IO2, 0x0230),
++       MFP_ADDR(DF_IO3, 0x0238),
++       MFP_ADDR(DF_IO4, 0x0258),
++       MFP_ADDR(DF_IO5, 0x0260),
++       MFP_ADDR(DF_IO6, 0x0268),
++       MFP_ADDR(DF_IO7, 0x0270),
++       MFP_ADDR(DF_IO8, 0x0224),
++       MFP_ADDR(DF_IO9, 0x022C),
++       MFP_ADDR(DF_IO10, 0x0234),
++       MFP_ADDR(DF_IO11, 0x023C),
++       MFP_ADDR(DF_IO12, 0x025C),
++       MFP_ADDR(DF_IO13, 0x0264),
++       MFP_ADDR(DF_IO14, 0x026C),
++       MFP_ADDR(DF_IO15, 0x0274),
++
++       MFP_ADDR_END,
++};
++
++/* override pxa300 MFP register addresses */
++static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
++       MFP_ADDR_X(GPIO30,  GPIO98,   0x0418),
++       MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
++
++       MFP_ADDR(ULPI_STP, 0x040C),
++       MFP_ADDR(ULPI_NXT, 0x0410),
++       MFP_ADDR(ULPI_DIR, 0x0414),
++
++       MFP_ADDR_END,
++};
++
++static int __init pxa300_init(void)
++{
++       if (cpu_is_pxa300() || cpu_is_pxa310()) {
++               pxa3xx_init_mfp();
++               pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
++       }
++
++       if (cpu_is_pxa310())
++               pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
++
++       return 0;
++}
++
++core_initcall(pxa300_init);
+Index: linux-2.6.22/arch/arm/mach-pxa/pxa320.c
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/arch/arm/mach-pxa/pxa320.c     2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,88 @@
++/*
++ * linux/arch/arm/mach-pxa/pxa320.c
++ *
++ * Code specific to PXA320
++ *
++ * Copyright (C) 2007 Marvell Internation Ltd.
++ *
++ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
++ *             initial version
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/mfp.h>
++#include <asm/arch/mfp-pxa320.h>
++
++static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
++
++       MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
++       MFP_ADDR_X(GPIO5,  GPIO26,  0x028C),
++       MFP_ADDR_X(GPIO27, GPIO62,  0x0400),
++       MFP_ADDR_X(GPIO63, GPIO73,  0x04B4),
++       MFP_ADDR_X(GPIO74, GPIO98,  0x04F0),
++       MFP_ADDR_X(GPIO99, GPIO127, 0x0600),
++       MFP_ADDR_X(GPIO0_2,  GPIO5_2,   0x0674),
++       MFP_ADDR_X(GPIO6_2,  GPIO13_2,  0x0494),
++       MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0),
++
++       MFP_ADDR(nXCVREN, 0x0138),
++       MFP_ADDR(DF_CLE_nOE, 0x0204),
++       MFP_ADDR(DF_nADV1_ALE, 0x0208),
++       MFP_ADDR(DF_SCLK_S, 0x020C),
++       MFP_ADDR(DF_SCLK_E, 0x0210),
++       MFP_ADDR(nBE0, 0x0214),
++       MFP_ADDR(nBE1, 0x0218),
++       MFP_ADDR(DF_nADV2_ALE, 0x021C),
++       MFP_ADDR(DF_INT_RnB, 0x0220),
++       MFP_ADDR(DF_nCS0, 0x0224),
++       MFP_ADDR(DF_nCS1, 0x0228),
++       MFP_ADDR(DF_nWE, 0x022C),
++       MFP_ADDR(DF_nRE_nOE, 0x0230),
++       MFP_ADDR(nLUA, 0x0234),
++       MFP_ADDR(nLLA, 0x0238),
++       MFP_ADDR(DF_ADDR0, 0x023C),
++       MFP_ADDR(DF_ADDR1, 0x0240),
++       MFP_ADDR(DF_ADDR2, 0x0244),
++       MFP_ADDR(DF_ADDR3, 0x0248),
++       MFP_ADDR(DF_IO0, 0x024C),
++       MFP_ADDR(DF_IO8, 0x0250),
++       MFP_ADDR(DF_IO1, 0x0254),
++       MFP_ADDR(DF_IO9, 0x0258),
++       MFP_ADDR(DF_IO2, 0x025C),
++       MFP_ADDR(DF_IO10, 0x0260),
++       MFP_ADDR(DF_IO3, 0x0264),
++       MFP_ADDR(DF_IO11, 0x0268),
++       MFP_ADDR(DF_IO4, 0x026C),
++       MFP_ADDR(DF_IO12, 0x0270),
++       MFP_ADDR(DF_IO5, 0x0274),
++       MFP_ADDR(DF_IO13, 0x0278),
++       MFP_ADDR(DF_IO6, 0x027C),
++       MFP_ADDR(DF_IO14, 0x0280),
++       MFP_ADDR(DF_IO7, 0x0284),
++       MFP_ADDR(DF_IO15, 0x0288),
++
++       MFP_ADDR_END,
++};
++
++static void __init pxa320_init_mfp(void)
++{
++       pxa3xx_init_mfp();
++       pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
++}
++
++static int __init pxa320_init(void)
++{
++       if (cpu_is_pxa320())
++               pxa320_init_mfp();
++
++       return 0;
++}
++
++core_initcall(pxa320_init);
+Index: linux-2.6.22/arch/arm/mach-pxa/pxa3xx.c
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/arch/arm/mach-pxa/pxa3xx.c     2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,216 @@
++/*
++ * linux/arch/arm/mach-pxa/pxa3xx.c
++ *
++ * code specific to pxa3xx aka Monahans
++ *
++ * Copyright (C) 2006 Marvell International Ltd.
++ *
++ * 2007-09-02: eric miao <eric.y.miao@gmail.com>
++ *             initial version
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/pm.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/pxa3xx-regs.h>
++#include <asm/arch/ohci.h>
++#include <asm/arch/pm.h>
++#include <asm/arch/dma.h>
++#include <asm/arch/ssp.h>
++
++#include "generic.h"
++#include "devices.h"
++#include "clock.h"
++
++/* Crystal clock: 13MHz */
++#define BASE_CLK       13000000
++
++/* Ring Oscillator Clock: 60MHz */
++#define RO_CLK         60000000
++
++#define ACCR_D0CS      (1 << 26)
++
++/* crystal frequency to static memory controller multiplier (SMCFS) */
++static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
++
++/* crystal frequency to HSIO bus frequency multiplier (HSS) */
++static unsigned char hss_mult[4] = { 8, 12, 16, 0 };
++
++/*
++ * Get the clock frequency as reflected by CCSR and the turbo flag.
++ * We assume these values have been applied via a fcs.
++ * If info is not 0 we also display the current settings.
++ */
++unsigned int pxa3xx_get_clk_frequency_khz(int info)
++{
++       unsigned long acsr, xclkcfg;
++       unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
++
++       /* Read XCLKCFG register turbo bit */
++       __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
++       t = xclkcfg & 0x1;
++
++       acsr = ACSR;
++
++       xl  = acsr & 0x1f;
++       xn  = (acsr >> 8) & 0x7;
++       hss = (acsr >> 14) & 0x3;
++
++       XL = xl * BASE_CLK;
++       XN = xn * XL;
++
++       ro = acsr & ACCR_D0CS;
++
++       CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
++       HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
++
++       if (info) {
++               pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
++                       RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
++                       (ro) ? "" : "in");
++               pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
++                       XL / 1000000, (XL % 1000000) / 10000, xl);
++               pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
++                       XN / 1000000, (XN % 1000000) / 10000, xn,
++                       (t) ? "" : "in");
++               pr_info("HSIO bus clock: %d.%02dMHz\n",
++                       HSS / 1000000, (HSS % 1000000) / 10000);
++       }
++
++       return CLK;
++}
++
++/*
++ * Return the current static memory controller clock frequency
++ * in units of 10kHz
++ */
++unsigned int pxa3xx_get_memclk_frequency_10khz(void)
++{
++       unsigned long acsr;
++       unsigned int smcfs, clk = 0;
++
++       acsr = ACSR;
++
++       smcfs = (acsr >> 23) & 0x7;
++       clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK;
++
++       return (clk / 10000);
++}
++
++/*
++ * Return the current HSIO bus clock frequency
++ */
++static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
++{
++       unsigned long acsr;
++       unsigned int hss, hsio_clk;
++
++       acsr = ACSR;
++
++       hss = (acsr >> 14) & 0x3;
++       hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
++
++       return hsio_clk;
++}
++
++static void clk_pxa3xx_cken_enable(struct clk *clk)
++{
++       unsigned long mask = 1ul << (clk->cken & 0x1f);
++
++       local_irq_disable();
++
++       if (clk->cken < 32)
++               CKENA |= mask;
++       else
++               CKENB |= mask;
++
++       local_irq_enable();
++}
++
++static void clk_pxa3xx_cken_disable(struct clk *clk)
++{
++       unsigned long mask = 1ul << (clk->cken & 0x1f);
++
++       local_irq_disable();
++
++       if (clk->cken < 32)
++               CKENA &= ~mask;
++       else
++               CKENB &= ~mask;
++
++       local_irq_enable();
++}
++
++static const struct clkops clk_pxa3xx_hsio_ops = {
++       .enable         = clk_pxa3xx_cken_enable,
++       .disable        = clk_pxa3xx_cken_disable,
++       .getrate        = clk_pxa3xx_hsio_getrate,
++};
++
++static struct clk pxa3xx_clks[] = {
++       INIT_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
++       INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
++
++       INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
++       INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
++       INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
++
++       INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
++       INIT_CKEN("UDCCLK",  UDC,  48000000, 5, &pxa_device_udc.dev),
++};
++
++void __init pxa3xx_init_irq(void)
++{
++       /* enable CP6 access */
++       u32 value;
++       __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
++       value |= (1 << 6);
++       __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
++
++       pxa_init_irq_low();
++       pxa_init_irq_high();
++       pxa_init_irq_gpio(128);
++}
++
++/*
++ * device registration specific to PXA3xx.
++ */
++
++static struct platform_device *devices[] __initdata = {
++       &pxa_device_mci,
++       &pxa_device_udc,
++       &pxa_device_fb,
++       &pxa_device_ffuart,
++       &pxa_device_btuart,
++       &pxa_device_stuart,
++       &pxa_device_i2c,
++       &pxa_device_i2s,
++       &pxa_device_ficp,
++       &pxa_device_rtc,
++};
++
++static int __init pxa3xx_init(void)
++{
++       int ret = 0;
++
++       if (cpu_is_pxa3xx()) {
++               clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks));
++
++               if ((ret = pxa_init_dma(32)))
++                       return ret;
++
++               return platform_add_devices(devices, ARRAY_SIZE(devices));
++       }
++       return 0;
++}
++
++subsys_initcall(pxa3xx_init);
+Index: linux-2.6.22/arch/arm/mach-pxa/time.c
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/time.c  2007-09-24 20:56:51.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/time.c       2007-09-24 20:57:20.000000000 +0200
+@@ -16,10 +16,48 @@
+ #include <linux/init.h>
+ #include <linux/interrupt.h>
+ #include <linux/clockchips.h>
++#include <linux/sched.h>
+ 
++#include <asm/div64.h>
++#include <asm/cnt32_to_63.h>
+ #include <asm/mach/irq.h>
+ #include <asm/mach/time.h>
+ #include <asm/arch/pxa-regs.h>
++#include <asm/mach-types.h>
++
++/*
++ * This is PXA's sched_clock implementation. This has a resolution
++ * of at least 308 ns and a maximum value of 208 days.
++ *
++ * The return value is guaranteed to be monotonic in that range as
++ * long as there is always less than 582 seconds between successive
++ * calls to sched_clock() which should always be the case in practice.
++ */
++
++#define OSCR2NS_SCALE_FACTOR 10
++
++static unsigned long oscr2ns_scale;
++
++static void __init set_oscr2ns_scale(unsigned long oscr_rate)
++{
++       unsigned long long v = 1000000000ULL << OSCR2NS_SCALE_FACTOR;
++       do_div(v, oscr_rate);
++       oscr2ns_scale = v;
++       /*
++        * We want an even value to automatically clear the top bit
++        * returned by cnt32_to_63() without an additional run time
++        * instruction. So if the LSB is 1 then round it up.
++        */
++       if (oscr2ns_scale & 1)
++               oscr2ns_scale++;
++}
++
++unsigned long long sched_clock(void)
++{
++       unsigned long long v = cnt32_to_63(OSCR);
++       return (v * oscr2ns_scale) >> OSCR2NS_SCALE_FACTOR;
++}
++
+ 
+ static irqreturn_t
+ pxa_ost0_interrupt(int irq, void *dev_id)
+@@ -149,18 +187,29 @@
+ 
+ static void __init pxa_timer_init(void)
+ {
++       unsigned long clock_tick_rate;
++
+        OIER = 0;
+        OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
+ 
++       if (cpu_is_pxa21x() || cpu_is_pxa25x())
++               clock_tick_rate = 3686400;
++       else if (machine_is_mainstone())
++               clock_tick_rate = 3249600;
++       else
++               clock_tick_rate = 3250000;
++
++       set_oscr2ns_scale(clock_tick_rate);
++
+        ckevt_pxa_osmr0.mult =
+-               div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
++               div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
+        ckevt_pxa_osmr0.max_delta_ns =
+                clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
+        ckevt_pxa_osmr0.min_delta_ns =
+                clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1;
+ 
+        cksrc_pxa_oscr0.mult =
+-               clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_pxa_oscr0.shift);
++               clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift);
+ 
+        setup_irq(IRQ_OST0, &pxa_ost0_irq);
+ 
+Index: linux-2.6.22/arch/arm/mach-pxa/zylonite.c
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/arch/arm/mach-pxa/zylonite.c   2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,184 @@
++/*
++ * linux/arch/arm/mach-pxa/zylonite.c
++ *
++ * Support for the PXA3xx Development Platform (aka Zylonite)
++ *
++ * Copyright (C) 2006 Marvell International Ltd.
++ *
++ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
++ *             rewrite to align with latest kernel
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/interrupt.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/hardware.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/pxafb.h>
++#include <asm/arch/zylonite.h>
++
++#include "generic.h"
++
++int gpio_backlight;
++int gpio_eth_irq;
++
++int lcd_id;
++int lcd_orientation;
++
++static struct resource smc91x_resources[] = {
++       [0] = {
++               .start  = ZYLONITE_ETH_PHYS + 0x300,
++               .end    = ZYLONITE_ETH_PHYS + 0xfffff,
++               .flags  = IORESOURCE_MEM,
++       },
++       [1] = {
++               .start  = -1,   /* for run-time assignment */
++               .end    = -1,
++               .flags  = IORESOURCE_IRQ,
++       }
++};
++
++static struct platform_device smc91x_device = {
++       .name           = "smc91x",
++       .id             = 0,
++       .num_resources  = ARRAY_SIZE(smc91x_resources),
++       .resource       = smc91x_resources,
++};
++
++#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES)
++static void zylonite_backlight_power(int on)
++{
++       gpio_set_value(gpio_backlight, on);
++}
++
++static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
++       .pixclock               = 110000,
++       .xres                   = 240,
++       .yres                   = 320,
++       .bpp                    = 16,
++       .hsync_len              = 4,
++       .left_margin            = 6,
++       .right_margin           = 4,
++       .vsync_len              = 2,
++       .upper_margin           = 2,
++       .lower_margin           = 3,
++       .sync                   = FB_SYNC_VERT_HIGH_ACT,
++};
++
++static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
++       .pixclock               = 50000,
++       .xres                   = 640,
++       .yres                   = 480,
++       .bpp                    = 16,
++       .hsync_len              = 1,
++       .left_margin            = 0x9f,
++       .right_margin           = 1,
++       .vsync_len              = 44,
++       .upper_margin           = 0,
++       .lower_margin           = 0,
++       .sync                   = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
++};
++
++static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
++       .num_modes              = 1,
++       .lccr0                  = LCCR0_Act,
++       .lccr3                  = LCCR3_PCP,
++       .pxafb_backlight_power  = zylonite_backlight_power,
++};
++
++static struct pxafb_mode_info sharp_ls037_modes[] = {
++       [0] = {
++               .pixclock       = 158000,
++               .xres           = 240,
++               .yres           = 320,
++               .bpp            = 16,
++               .hsync_len      = 4,
++               .left_margin    = 39,
++               .right_margin   = 39,
++               .vsync_len      = 1,
++               .upper_margin   = 2,
++               .lower_margin   = 3,
++               .sync           = 0,
++       },
++       [1] = {
++               .pixclock       = 39700,
++               .xres           = 480,
++               .yres           = 640,
++               .bpp            = 16,
++               .hsync_len      = 8,
++               .left_margin    = 81,
++               .right_margin   = 81,
++               .vsync_len      = 1,
++               .upper_margin   = 2,
++               .lower_margin   = 7,
++               .sync           = 0,
++       },
++};
++
++static struct pxafb_mach_info zylonite_sharp_lcd_info = {
++       .modes                  = sharp_ls037_modes,
++       .num_modes              = 2,
++       .lccr0                  = LCCR0_Act,
++       .lccr3                  = LCCR3_PCP | LCCR3_HSP | LCCR3_VSP,
++       .pxafb_backlight_power  = zylonite_backlight_power,
++};
++
++static void __init zylonite_init_lcd(void)
++{
++       /* backlight GPIO: output, default on */
++       gpio_direction_output(gpio_backlight, 1);
++
++       if (lcd_id & 0x20) {
++               set_pxa_fb_info(&zylonite_sharp_lcd_info);
++               return;
++       }
++
++       /* legacy LCD panels, it would be handy here if LCD panel type can
++        * be decided at run-time
++        */
++       if (1)
++               zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
++       else
++               zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
++
++       set_pxa_fb_info(&zylonite_toshiba_lcd_info);
++}
++#else
++static inline void zylonite_init_lcd(void) {}
++#endif
++
++static void __init zylonite_init(void)
++{
++       /* board-processor specific initialization */
++       zylonite_pxa300_init();
++       zylonite_pxa320_init();
++
++       /*
++        * Note: We depend that the bootloader set
++        * the correct value to MSC register for SMC91x.
++        */
++       smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
++       smc91x_resources[1].end   = gpio_to_irq(gpio_eth_irq);
++       platform_device_register(&smc91x_device);
++
++       zylonite_init_lcd();
++}
++
++MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
++       .phys_io        = 0x40000000,
++       .boot_params    = 0xa0000100,
++       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
++       .map_io         = pxa_map_io,
++       .init_irq       = pxa3xx_init_irq,
++       .timer          = &pxa_timer,
++       .init_machine   = zylonite_init,
++MACHINE_END
+Index: linux-2.6.22/arch/arm/mach-pxa/zylonite_pxa300.c
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/arch/arm/mach-pxa/zylonite_pxa300.c    2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,188 @@
++/*
++ * linux/arch/arm/mach-pxa/zylonite_pxa300.c
++ *
++ * PXA300/PXA310 specific support code for the
++ * PXA3xx Development Platform (aka Zylonite)
++ *
++ * Copyright (C) 2007 Marvell Internation Ltd.
++ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
++ *             initial version
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/mfp-pxa300.h>
++#include <asm/arch/zylonite.h>
++
++#define ARRAY_AND_SIZE(x)      (x), ARRAY_SIZE(x)
++
++/* PXA300/PXA310 common configurations */
++static mfp_cfg_t common_mfp_cfg[] __initdata = {
++       /* LCD */
++       GPIO54_LCD_LDD_0,
++       GPIO55_LCD_LDD_1,
++       GPIO56_LCD_LDD_2,
++       GPIO57_LCD_LDD_3,
++       GPIO58_LCD_LDD_4,
++       GPIO59_LCD_LDD_5,
++       GPIO60_LCD_LDD_6,
++       GPIO61_LCD_LDD_7,
++       GPIO62_LCD_LDD_8,
++       GPIO63_LCD_LDD_9,
++       GPIO64_LCD_LDD_10,
++       GPIO65_LCD_LDD_11,
++       GPIO66_LCD_LDD_12,
++       GPIO67_LCD_LDD_13,
++       GPIO68_LCD_LDD_14,
++       GPIO69_LCD_LDD_15,
++       GPIO70_LCD_LDD_16,
++       GPIO71_LCD_LDD_17,
++       GPIO72_LCD_FCLK,
++       GPIO73_LCD_LCLK,
++       GPIO74_LCD_PCLK,
++       GPIO75_LCD_BIAS,
++       GPIO76_LCD_VSYNC,
++       GPIO127_LCD_CS_N,
++
++       /* BTUART */
++       GPIO111_UART2_RTS,
++       GPIO112_UART2_RXD,
++       GPIO113_UART2_TXD,
++       GPIO114_UART2_CTS,
++
++       /* STUART */
++       GPIO109_UART3_TXD,
++       GPIO110_UART3_RXD,
++
++       /* AC97 */
++       GPIO23_AC97_nACRESET,
++       GPIO24_AC97_SYSCLK,
++       GPIO29_AC97_BITCLK,
++       GPIO25_AC97_SDATA_IN_0,
++       GPIO27_AC97_SDATA_OUT,
++       GPIO28_AC97_SYNC,
++
++       /* Keypad */
++       GPIO107_KP_DKIN_0,
++       GPIO108_KP_DKIN_1,
++       GPIO115_KP_MKIN_0,
++       GPIO116_KP_MKIN_1,
++       GPIO117_KP_MKIN_2,
++       GPIO118_KP_MKIN_3,
++       GPIO119_KP_MKIN_4,
++       GPIO120_KP_MKIN_5,
++       GPIO2_2_KP_MKIN_6,
++       GPIO3_2_KP_MKIN_7,
++       GPIO121_KP_MKOUT_0,
++       GPIO122_KP_MKOUT_1,
++       GPIO123_KP_MKOUT_2,
++       GPIO124_KP_MKOUT_3,
++       GPIO125_KP_MKOUT_4,
++       GPIO4_2_KP_MKOUT_5,
++       GPIO5_2_KP_MKOUT_6,
++       GPIO6_2_KP_MKOUT_7,
++};
++
++static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
++       /* FFUART */
++       GPIO30_UART1_RXD,
++       GPIO31_UART1_TXD,
++       GPIO32_UART1_CTS,
++       GPIO37_UART1_RTS,
++       GPIO33_UART1_DCD,
++       GPIO34_UART1_DSR,
++       GPIO35_UART1_RI,
++       GPIO36_UART1_DTR,
++
++       /* Ethernet */
++       GPIO2_nCS3,
++       GPIO99_GPIO,
++};
++
++static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
++       /* FFUART */
++       GPIO99_UART1_RXD,
++       GPIO100_UART1_TXD,
++       GPIO101_UART1_CTS,
++       GPIO106_UART1_RTS,
++
++       /* Ethernet */
++       GPIO2_nCS3,
++       GPIO102_GPIO,
++};
++
++#define NUM_LCD_DETECT_PINS    7
++
++static int lcd_detect_pins[] __initdata = {
++       MFP_PIN_GPIO71, /* LCD_LDD_17 - ORIENT */
++       MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */
++       MFP_PIN_GPIO75, /* LCD_BIAS   - LCDID[4] */
++       MFP_PIN_GPIO73, /* LCD_LCLK   - LCDID[3] */
++       MFP_PIN_GPIO72, /* LCD_FCLK   - LCDID[2] */
++       MFP_PIN_GPIO127,/* LCD_CS_N   - LCDID[1] */
++       MFP_PIN_GPIO76, /* LCD_VSYNC  - LCDID[0] */
++};
++
++static void __init zylonite_detect_lcd_panel(void)
++{
++       unsigned long mfpr_save[NUM_LCD_DETECT_PINS];
++       int i, gpio, id = 0;
++
++       /* save the original MFP settings of these pins and configure
++        * them as GPIO Input, DS01X, Pull Neither, Edge Clear
++        */
++       for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
++               mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
++               pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440);
++       }
++
++       for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
++               id = id << 1;
++               gpio = mfp_to_gpio(lcd_detect_pins[i]);
++               gpio_direction_input(gpio);
++
++               if (gpio_get_value(gpio))
++                       id = id | 0x1;
++       }
++
++       /* lcd id, flush out bit 1 */
++       lcd_id = id & 0x3d;
++
++       /* lcd orientation, portrait or landscape */
++       lcd_orientation = (id >> 6) & 0x1;
++
++       /* restore the original MFP settings */
++       for (i = 0; i < NUM_LCD_DETECT_PINS; i++)
++               pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
++}
++
++void __init zylonite_pxa300_init(void)
++{
++       if (cpu_is_pxa300() || cpu_is_pxa310()) {
++               /* initialize MFP */
++               pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg));
++
++               /* detect LCD panel */
++               zylonite_detect_lcd_panel();
++
++               /* GPIO pin assignment */
++               gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
++       }
++
++       if (cpu_is_pxa300()) {
++               pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg));
++               gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99);
++       }
++
++       if (cpu_is_pxa310()) {
++               pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
++               gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
++       }
++}
+Index: linux-2.6.22/arch/arm/mach-pxa/zylonite_pxa320.c
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/arch/arm/mach-pxa/zylonite_pxa320.c    2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,173 @@
++/*
++ * linux/arch/arm/mach-pxa/zylonite_pxa320.c
++ *
++ * PXA320 specific support code for the
++ * PXA3xx Development Platform (aka Zylonite)
++ *
++ * Copyright (C) 2007 Marvell Internation Ltd.
++ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
++ *             initial version
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++
++#include <asm/arch/gpio.h>
++#include <asm/arch/mfp-pxa320.h>
++#include <asm/arch/zylonite.h>
++
++#define ARRAY_AND_SIZE(x)      (x), ARRAY_SIZE(x)
++
++static mfp_cfg_t mfp_cfg[] __initdata = {
++       /* LCD */
++       GPIO6_2_LCD_LDD_0,
++       GPIO7_2_LCD_LDD_1,
++       GPIO8_2_LCD_LDD_2,
++       GPIO9_2_LCD_LDD_3,
++       GPIO10_2_LCD_LDD_4,
++       GPIO11_2_LCD_LDD_5,
++       GPIO12_2_LCD_LDD_6,
++       GPIO13_2_LCD_LDD_7,
++       GPIO63_LCD_LDD_8,
++       GPIO64_LCD_LDD_9,
++       GPIO65_LCD_LDD_10,
++       GPIO66_LCD_LDD_11,
++       GPIO67_LCD_LDD_12,
++       GPIO68_LCD_LDD_13,
++       GPIO69_LCD_LDD_14,
++       GPIO70_LCD_LDD_15,
++       GPIO71_LCD_LDD_16,
++       GPIO72_LCD_LDD_17,
++       GPIO73_LCD_CS_N,
++       GPIO74_LCD_VSYNC,
++       GPIO14_2_LCD_FCLK,
++       GPIO15_2_LCD_LCLK,
++       GPIO16_2_LCD_PCLK,
++       GPIO17_2_LCD_BIAS,
++
++       /* FFUART */
++       GPIO41_UART1_RXD,
++       GPIO42_UART1_TXD,
++       GPIO43_UART1_CTS,
++       GPIO44_UART1_DCD,
++       GPIO45_UART1_DSR,
++       GPIO46_UART1_RI,
++       GPIO47_UART1_DTR,
++       GPIO48_UART1_RTS,
++
++       /* AC97 */
++       GPIO34_AC97_SYSCLK,
++       GPIO35_AC97_SDATA_IN_0,
++       GPIO37_AC97_SDATA_OUT,
++       GPIO38_AC97_SYNC,
++       GPIO39_AC97_BITCLK,
++       GPIO40_AC97_nACRESET,
++
++       /* I2C */
++       GPIO32_I2C_SCL,
++       GPIO33_I2C_SDA,
++
++       /* Keypad */
++       GPIO105_KP_DKIN_0,
++       GPIO106_KP_DKIN_1,
++       GPIO113_KP_MKIN_0,
++       GPIO114_KP_MKIN_1,
++       GPIO115_KP_MKIN_2,
++       GPIO116_KP_MKIN_3,
++       GPIO117_KP_MKIN_4,
++       GPIO118_KP_MKIN_5,
++       GPIO119_KP_MKIN_6,
++       GPIO120_KP_MKIN_7,
++       GPIO121_KP_MKOUT_0,
++       GPIO122_KP_MKOUT_1,
++       GPIO123_KP_MKOUT_2,
++       GPIO124_KP_MKOUT_3,
++       GPIO125_KP_MKOUT_4,
++       GPIO126_KP_MKOUT_5,
++       GPIO127_KP_MKOUT_6,
++       GPIO5_2_KP_MKOUT_7,
++
++       /* Ethernet */
++       GPIO4_nCS3,
++       GPIO90_GPIO,
++};
++
++#define NUM_LCD_DETECT_PINS    7
++
++static int lcd_detect_pins[] __initdata = {
++       MFP_PIN_GPIO72,   /* LCD_LDD_17 - ORIENT */
++       MFP_PIN_GPIO71,   /* LCD_LDD_16 - LCDID[5] */
++       MFP_PIN_GPIO17_2, /* LCD_BIAS   - LCDID[4] */
++       MFP_PIN_GPIO15_2, /* LCD_LCLK   - LCDID[3] */
++       MFP_PIN_GPIO14_2, /* LCD_FCLK   - LCDID[2] */
++       MFP_PIN_GPIO73,   /* LCD_CS_N   - LCDID[1] */
++       MFP_PIN_GPIO74,   /* LCD_VSYNC  - LCDID[0] */
++       /*
++        * set the MFP_PIN_GPIO 14/15/17 to alternate function other than
++        * GPIO to avoid input level confliction with 14_2, 15_2, 17_2
++        */
++       MFP_PIN_GPIO14,
++       MFP_PIN_GPIO15,
++       MFP_PIN_GPIO17,
++};
++
++static int lcd_detect_mfpr[] __initdata = {
++       /* AF0, DS 1X, Pull Neither, Edge Clear */
++       0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440,
++       0xc442, /* Backlight, Pull-Up, AF2 */
++       0x8445, /* AF5 */
++       0x8445, /* AF5 */
++};
++
++static void __init zylonite_detect_lcd_panel(void)
++{
++       unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)];
++       int i, gpio, id = 0;
++
++       /* save the original MFP settings of these pins and configure them
++        * as GPIO Input, DS01X, Pull Neither, Edge Clear
++        */
++       for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) {
++               mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
++               pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]);
++       }
++
++       for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
++               id = id << 1;
++               gpio = mfp_to_gpio(lcd_detect_pins[i]);
++               gpio_direction_input(gpio);
++
++               if (gpio_get_value(gpio))
++                       id = id | 0x1;
++       }
++
++       /* lcd id, flush out bit 1 */
++       lcd_id = id & 0x3d;
++
++       /* lcd orientation, portrait or landscape */
++       lcd_orientation = (id >> 6) & 0x1;
++
++       /* restore the original MFP settings */
++       for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++)
++               pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
++}
++
++void __init zylonite_pxa320_init(void)
++{
++       if (cpu_is_pxa320()) {
++               /* initialize MFP */
++               pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
++
++               /* detect LCD panel */
++               zylonite_detect_lcd_panel();
++
++               /* GPIO pin assignment */
++               gpio_backlight  = mfp_to_gpio(MFP_PIN_GPIO14);
++               gpio_eth_irq    = mfp_to_gpio(MFP_PIN_GPIO9);
++       }
++}
+Index: linux-2.6.22/arch/arm/mm/Kconfig
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mm/Kconfig       2007-09-24 20:56:51.000000000 +0200
++++ linux-2.6.22/arch/arm/mm/Kconfig    2007-09-24 20:57:20.000000000 +0200
+@@ -322,7 +322,7 @@
+ # XScale
+ config CPU_XSCALE
+        bool
+-       depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
++       depends on ARCH_IOP32X || ARCH_IOP33X || PXA25x || PXA27x || ARCH_IXP4XX || ARCH_IXP2000
+        default y
+        select CPU_32v5
+        select CPU_ABRT_EV5T
+@@ -333,7 +333,7 @@
+ # XScale Core Version 3
+ config CPU_XSC3
+        bool
+-       depends on ARCH_IXP23XX || ARCH_IOP13XX
++       depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx
+        default y
+        select CPU_32v5
+        select CPU_ABRT_EV5T
+Index: linux-2.6.22/drivers/i2c/busses/i2c-pxa.c
+===================================================================
+--- linux-2.6.22.orig/drivers/i2c/busses/i2c-pxa.c      2007-09-24 20:56:56.000000000 +0200
++++ linux-2.6.22/drivers/i2c/busses/i2c-pxa.c   2007-09-24 20:57:20.000000000 +0200
+@@ -31,6 +31,8 @@
+ #include <linux/interrupt.h>
+ #include <linux/i2c-pxa.h>
+ #include <linux/platform_device.h>
++#include <linux/err.h>
++#include <linux/clk.h>
+ 
+ #include <asm/hardware.h>
+ #include <asm/irq.h>
+@@ -48,6 +50,7 @@
+        unsigned int            slave_addr;
+ 
+        struct i2c_adapter      adap;
++       struct clk              *clk;
+ #ifdef CONFIG_I2C_PXA_SLAVE
+        struct i2c_slave_client *slave;
+ #endif
+@@ -869,6 +872,12 @@
+ 
+        sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
+ 
++       i2c->clk = clk_get(&dev->dev, "I2CCLK");
++       if (IS_ERR(i2c->clk)) {
++               ret = PTR_ERR(i2c->clk);
++               goto eclk;
++       }
++
+        i2c->reg_base = ioremap(res->start, res_len(res));
+        if (!i2c->reg_base) {
+                ret = -EIO;
+@@ -889,22 +898,19 @@
+        }
+ #endif
+ 
++       clk_enable(i2c->clk);
++#ifdef CONFIG_PXA27x
+        switch (dev->id) {
+        case 0:
+-#ifdef CONFIG_PXA27x
+                pxa_gpio_mode(GPIO117_I2CSCL_MD);
+                pxa_gpio_mode(GPIO118_I2CSDA_MD);
+-#endif
+-               pxa_set_cken(CKEN_I2C, 1);
+                break;
+-#ifdef CONFIG_PXA27x
+        case 1:
+                local_irq_disable();
+                PCFR |= PCFR_PI2CEN;
+                local_irq_enable();
+-               pxa_set_cken(CKEN_PWRI2C, 1);
+-#endif
+        }
++#endif
+ 
+        ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
+                          i2c->adap.name, i2c);
+@@ -948,19 +954,18 @@
+ eadapt:
+        free_irq(irq, i2c);
+ ereqirq:
+-       switch (dev->id) {
+-       case 0:
+-               pxa_set_cken(CKEN_I2C, 0);
+-               break;
++       clk_disable(i2c->clk);
++
+ #ifdef CONFIG_PXA27x
+-       case 1:
+-               pxa_set_cken(CKEN_PWRI2C, 0);
++       if (dev->id == 1) {
+                local_irq_disable();
+                PCFR &= ~PCFR_PI2CEN;
+                local_irq_enable();
+-#endif
+        }
++#endif
+ eremap:
++       clk_put(i2c->clk);
++eclk:
+        kfree(i2c);
+ emalloc:
+        release_mem_region(res->start, res_len(res));
+@@ -975,18 +980,18 @@
+ 
+        i2c_del_adapter(&i2c->adap);
+        free_irq(i2c->irq, i2c);
+-       switch (dev->id) {
+-       case 0:
+-               pxa_set_cken(CKEN_I2C, 0);
+-               break;
++
++       clk_disable(i2c->clk);
++       clk_put(i2c->clk);
++
+ #ifdef CONFIG_PXA27x
+-       case 1:
+-               pxa_set_cken(CKEN_PWRI2C, 0);
++       if (dev->id == 1) {
+                local_irq_disable();
+                PCFR &= ~PCFR_PI2CEN;
+                local_irq_enable();
+-#endif
+        }
++#endif
++
+        release_mem_region(i2c->iobase, i2c->iosize);
+        kfree(i2c);
+ 
+Index: linux-2.6.22/drivers/input/keyboard/pxa27x_keyboard.c
+===================================================================
+--- linux-2.6.22.orig/drivers/input/keyboard/pxa27x_keyboard.c  2007-09-24 20:56:56.000000000 +0200
++++ linux-2.6.22/drivers/input/keyboard/pxa27x_keyboard.c       2007-09-24 20:57:20.000000000 +0200
+@@ -23,6 +23,8 @@
+ #include <linux/input.h>
+ #include <linux/device.h>
+ #include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/err.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -40,6 +42,8 @@
+                                 col/2 == 2 ? KPASMKP2 : KPASMKP3)
+ #define KPASMKPx_MKC(row, col) (1 << (row + 16 * (col % 2)))
+ 
++static struct clk *pxakbd_clk;
++
+ static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id)
+ {
+        struct platform_device *pdev = dev_id;
+@@ -104,7 +108,7 @@
+        KPREC = 0x7F;
+ 
+        /* Enable unit clock */
+-       pxa_set_cken(CKEN_KEYPAD, 1);
++       clk_enable(pxakbd_clk);
+ 
+        return 0;
+ }
+@@ -112,7 +116,7 @@
+ static void pxakbd_close(struct input_dev *dev)
+ {
+        /* Disable clock unit */
+-       pxa_set_cken(CKEN_KEYPAD, 0);
++       clk_disable(pxakbd_clk);
+ }
+ 
+ #ifdef CONFIG_PM
+@@ -140,7 +144,8 @@
+                KPREC = pdata->reg_kprec;
+ 
+                /* Enable unit clock */
+-               pxa_set_cken(CKEN_KEYPAD, 1);
++               clk_disable(pxakbd_clk);
++               clk_enable(pxakbd_clk);
+        }
+ 
+        mutex_unlock(&input_dev->mutex);
+@@ -158,11 +163,18 @@
+        struct input_dev *input_dev;
+        int i, row, col, error;
+ 
++       pxakbd_clk = clk_get(&pdev->dev, "KBDCLK");
++       if (IS_ERR(pxakbd_clk)) {
++               error = PTR_ERR(pxakbd_clk);
++               goto err_clk;
++       }
++
+        /* Create and register the input driver. */
+        input_dev = input_allocate_device();
+        if (!input_dev) {
+                printk(KERN_ERR "Cannot request keypad device\n");
+-               return -ENOMEM;
++               error = -ENOMEM;
++               goto err_alloc;
+        }
+ 
+        input_dev->name = DRIVER_NAME;
+@@ -185,7 +197,6 @@
+                            DRIVER_NAME, pdev);
+        if (error) {
+                printk(KERN_ERR "Cannot request keypad IRQ\n");
+-               pxa_set_cken(CKEN_KEYPAD, 0);
+                goto err_free_dev;
+        }
+ 
+@@ -217,6 +228,9 @@
+        free_irq(IRQ_KEYPAD, pdev);
+  err_free_dev:
+        input_free_device(input_dev);
++ err_alloc:
++       clk_put(pxakbd_clk);
++ err_clk:
+        return error;
+ }
+ 
+@@ -226,6 +240,7 @@
+ 
+        input_unregister_device(input_dev);
+        free_irq(IRQ_KEYPAD, pdev);
++       clk_put(pxakbd_clk);
+        platform_set_drvdata(pdev, NULL);
+ 
+        return 0;
+Index: linux-2.6.22/drivers/mmc/host/pxamci.c
+===================================================================
+--- linux-2.6.22.orig/drivers/mmc/host/pxamci.c 2007-09-24 20:56:58.000000000 +0200
++++ linux-2.6.22/drivers/mmc/host/pxamci.c      2007-09-24 20:57:20.000000000 +0200
+@@ -23,6 +23,8 @@
+ #include <linux/delay.h>
+ #include <linux/interrupt.h>
+ #include <linux/dma-mapping.h>
++#include <linux/clk.h>
++#include <linux/err.h>
+ #include <linux/mmc/host.h>
+ 
+ #include <asm/dma.h>
+@@ -44,6 +46,8 @@
+        spinlock_t              lock;
+        struct resource         *res;
+        void __iomem            *base;
++       struct clk              *clk;
++       unsigned long           clkrate;
+        int                     irq;
+        int                     dma;
+        unsigned int            clkrt;
+@@ -119,7 +123,7 @@
+        writel(nob, host->base + MMC_NOB);
+        writel(data->blksz, host->base + MMC_BLKLEN);
+ 
+-       clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
++       clks = (unsigned long long)data->timeout_ns * host->clkrate;
+        do_div(clks, 1000000000UL);
+        timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
+        writel((timeout + 255) / 256, host->base + MMC_RDTO);
+@@ -358,18 +362,25 @@
+        struct pxamci_host *host = mmc_priv(mmc);
+ 
+        if (ios->clock) {
+-               unsigned int clk = CLOCKRATE / ios->clock;
+-               if (CLOCKRATE / clk > ios->clock)
++               unsigned long rate = host->clkrate;
++               unsigned int clk = rate / ios->clock;
++
++               /*
++                * clk might result in a lower divisor than we
++                * desire.  check for that condition and adjust
++                * as appropriate.
++                */
++               if (rate / clk > ios->clock)
+                        clk <<= 1;
+                host->clkrt = fls(clk) - 1;
+-               pxa_set_cken(CKEN_MMC, 1);
++               clk_enable(host->clk);
+ 
+                /*
+                 * we write clkrt on the next command
+                 */
+        } else {
+                pxamci_stop_clock(host);
+-               pxa_set_cken(CKEN_MMC, 0);
++               clk_disable(host->clk);
+        }
+ 
+        if (host->power_mode != ios->power_mode) {
+@@ -429,8 +440,6 @@
+        }
+ 
+        mmc->ops = &pxamci_ops;
+-       mmc->f_min = CLOCKRATE_MIN;
+-       mmc->f_max = CLOCKRATE_MAX;
+ 
+        /*
+         * We can do SG-DMA, but we don't because we never know how much
+@@ -457,6 +466,22 @@
+        host->mmc = mmc;
+        host->dma = -1;
+        host->pdata = pdev->dev.platform_data;
++
++       host->clk = clk_get(&pdev->dev, "MMCCLK");
++       if (IS_ERR(host->clk)) {
++               ret = PTR_ERR(host->clk);
++               host->clk = NULL;
++               goto out;
++       }
++
++       host->clkrate = clk_get_rate(host->clk);
++
++       /*
++        * Calculate minimum clock rate, rounding up.
++        */
++       mmc->f_min = (host->clkrate + 63) / 64;
++       mmc->f_max = host->clkrate;
++
+        mmc->ocr_avail = host->pdata ?
+                         host->pdata->ocr_mask :
+                         MMC_VDD_32_33|MMC_VDD_33_34;
+@@ -515,6 +540,8 @@
+                        iounmap(host->base);
+                if (host->sg_cpu)
+                        dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
++               if (host->clk)
++                       clk_put(host->clk);
+        }
+        if (mmc)
+                mmc_free_host(mmc);
+@@ -549,6 +576,8 @@
+                iounmap(host->base);
+                dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+ 
++               clk_put(host->clk);
++
+                release_resource(host->res);
+ 
+                mmc_free_host(mmc);
+Index: linux-2.6.22/drivers/mmc/host/pxamci.h
+===================================================================
+--- linux-2.6.22.orig/drivers/mmc/host/pxamci.h 2007-09-24 20:56:58.000000000 +0200
++++ linux-2.6.22/drivers/mmc/host/pxamci.h      2007-09-24 20:57:20.000000000 +0200
+@@ -86,17 +86,3 @@
+ #define MMC_RXFIFO     0x0040  /* 8 bit */
+ 
+ #define MMC_TXFIFO     0x0044  /* 8 bit */
+-
+-/*
+- * The base MMC clock rate
+- */
+-#ifdef CONFIG_PXA27x
+-#define CLOCKRATE_MIN  304688
+-#define CLOCKRATE_MAX  19500000
+-#else
+-#define CLOCKRATE_MIN  312500
+-#define CLOCKRATE_MAX  20000000
+-#endif
+-
+-#define CLOCKRATE      CLOCKRATE_MAX
+-
+Index: linux-2.6.22/drivers/mtd/maps/lubbock-flash.c
+===================================================================
+--- linux-2.6.22.orig/drivers/mtd/maps/lubbock-flash.c  2007-07-09 01:32:17.000000000 +0200
++++ linux-2.6.22/drivers/mtd/maps/lubbock-flash.c       2007-09-24 20:57:20.000000000 +0200
+@@ -24,10 +24,10 @@
+ 
+ #include <asm/io.h>
+ #include <asm/hardware.h>
++#include <asm/mach-types.h>
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/lubbock.h>
+ 
+-
+ #define ROM_ADDR       0x00000000
+ #define FLASH_ADDR     0x04000000
+ 
+@@ -73,9 +73,14 @@
+ 
+ static int __init init_lubbock(void)
+ {
+-       int flashboot = (LUB_CONF_SWITCHES & 1);
++       int flashboot;
+        int ret = 0, i;
+ 
++       if (!machine_is_lubbock())
++               return -ENODEV;
++
++       flashboot = (LUB_CONF_SWITCHES & 1);
++
+        lubbock_maps[0].bankwidth = lubbock_maps[1].bankwidth =
+                (BOOT_DEF & 1) ? 2 : 4;
+ 
+Index: linux-2.6.22/drivers/mtd/maps/mainstone-flash.c
+===================================================================
+--- linux-2.6.22.orig/drivers/mtd/maps/mainstone-flash.c        2007-07-09 01:32:17.000000000 +0200
++++ linux-2.6.22/drivers/mtd/maps/mainstone-flash.c     2007-09-24 20:57:20.000000000 +0200
+@@ -24,10 +24,10 @@
+ 
+ #include <asm/io.h>
+ #include <asm/hardware.h>
++#include <asm/mach-types.h>
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/mainstone.h>
+ 
+-
+ #define ROM_ADDR       0x00000000
+ #define FLASH_ADDR     0x04000000
+ 
+@@ -77,6 +77,9 @@
+        int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
+        int ret = 0, i;
+ 
++       if (!machine_is_mainstone())
++               return -ENODEV;
++
+        mainstone_maps[0].bankwidth = (BOOT_DEF & 1) ? 2 : 4;
+        mainstone_maps[1].bankwidth = 4;
+ 
+Index: linux-2.6.22/drivers/net/irda/pxaficp_ir.c
+===================================================================
+--- linux-2.6.22.orig/drivers/net/irda/pxaficp_ir.c     2007-07-09 01:32:17.000000000 +0200
++++ linux-2.6.22/drivers/net/irda/pxaficp_ir.c  2007-09-24 20:57:20.000000000 +0200
+@@ -23,6 +23,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/pm.h>
++#include <linux/clk.h>
+ 
+ #include <net/irda/irda.h>
+ #include <net/irda/irmod.h>
+@@ -87,8 +88,30 @@
+ 
+        struct device           *dev;
+        struct pxaficp_platform_data *pdata;
++       struct clk              *fir_clk;
++       struct clk              *sir_clk;
++       struct clk              *cur_clk;
+ };
+ 
++static inline void pxa_irda_disable_clk(struct pxa_irda *si)
++{
++       if (si->cur_clk)
++               clk_disable(si->cur_clk);
++       si->cur_clk = NULL;
++}
++
++static inline void pxa_irda_enable_firclk(struct pxa_irda *si)
++{
++       si->cur_clk = si->fir_clk;
++       clk_enable(si->fir_clk);
++}
++
++static inline void pxa_irda_enable_sirclk(struct pxa_irda *si)
++{
++       si->cur_clk = si->sir_clk;
++       clk_enable(si->sir_clk);
++}
++
+ 
+ #define IS_FIR(si)             ((si)->speed >= 4000000)
+ #define IRDA_FRAME_SIZE_LIMIT  2047
+@@ -134,7 +157,7 @@
+                        DCSR(si->rxdma) &= ~DCSR_RUN;
+                        /* disable FICP */
+                        ICCR0 = 0;
+-                       pxa_set_cken(CKEN_FICP, 0);
++                       pxa_irda_disable_clk(si);
+ 
+                        /* set board transceiver to SIR mode */
+                        si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
+@@ -144,7 +167,7 @@
+                        pxa_gpio_mode(GPIO47_STTXD_MD);
+ 
+                        /* enable the STUART clock */
+-                       pxa_set_cken(CKEN_STUART, 1);
++                       pxa_irda_enable_sirclk(si);
+                }
+ 
+                /* disable STUART first */
+@@ -169,7 +192,7 @@
+                /* disable STUART */
+                STIER = 0;
+                STISR = 0;
+-               pxa_set_cken(CKEN_STUART, 0);
++               pxa_irda_disable_clk(si);
+ 
+                /* disable FICP first */
+                ICCR0 = 0;
+@@ -182,7 +205,7 @@
+                pxa_gpio_mode(GPIO47_ICPTXD_MD);
+ 
+                /* enable the FICP clock */
+-               pxa_set_cken(CKEN_FICP, 1);
++               pxa_irda_enable_firclk(si);
+ 
+                si->speed = speed;
+                pxa_irda_fir_dma_rx_start(si);
+@@ -592,16 +615,15 @@
+        STIER = 0;
+        /* disable STUART SIR mode */
+        STISR = 0;
+-       /* disable the STUART clock */
+-       pxa_set_cken(CKEN_STUART, 0);
+ 
+        /* disable DMA */
+        DCSR(si->txdma) &= ~DCSR_RUN;
+        DCSR(si->rxdma) &= ~DCSR_RUN;
+        /* disable FICP */
+        ICCR0 = 0;
+-       /* disable the FICP clock */
+-       pxa_set_cken(CKEN_FICP, 0);
++
++       /* disable the STUART or FICP clocks */
++       pxa_irda_disable_clk(si);
+ 
+        DRCMR17 = 0;
+        DRCMR18 = 0;
+@@ -792,6 +814,13 @@
+        si->dev = &pdev->dev;
+        si->pdata = pdev->dev.platform_data;
+ 
++       si->sir_clk = clk_get(&pdev->dev, "UARTCLK");
++       si->fir_clk = clk_get(&pdev->dev, "FICPCLK");
++       if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) {
++               err = PTR_ERR(IS_ERR(si->sir_clk) ? si->sir_clk : si->fir_clk);
++               goto err_mem_4;
++       }
++
+        /*
+         * Initialise the SIR buffers
+         */
+@@ -831,6 +860,10 @@
+ err_mem_5:
+                kfree(si->rx_buff.head);
+ err_mem_4:
++               if (si->sir_clk && !IS_ERR(si->sir_clk))
++                       clk_put(si->sir_clk);
++               if (si->fir_clk && !IS_ERR(si->fir_clk))
++                       clk_put(si->fir_clk);
+                free_netdev(dev);
+ err_mem_3:
+                release_mem_region(__PREG(FICP), 0x1c);
+@@ -850,6 +883,8 @@
+                unregister_netdev(dev);
+                kfree(si->tx_buff.head);
+                kfree(si->rx_buff.head);
++               clk_put(si->fir_clk);
++               clk_put(si->sir_clk);
+                free_netdev(dev);
+        }
+ 
+Index: linux-2.6.22/drivers/net/smc91x.c
+===================================================================
+--- linux-2.6.22.orig/drivers/net/smc91x.c      2007-07-09 01:32:17.000000000 +0200
++++ linux-2.6.22/drivers/net/smc91x.c   2007-09-24 20:57:20.000000000 +0200
+@@ -173,56 +173,6 @@
+  */
+ #define MII_DELAY              1
+ 
+-/* store this information for the driver.. */
+-struct smc_local {
+-       /*
+-        * If I have to wait until memory is available to send a
+-        * packet, I will store the skbuff here, until I get the
+-        * desired memory.  Then, I'll send it out and free it.
+-        */
+-       struct sk_buff *pending_tx_skb;
+-       struct tasklet_struct tx_task;
+-
+-       /*
+-        * these are things that the kernel wants me to keep, so users
+-        * can find out semi-useless statistics of how well the card is
+-        * performing
+-        */
+-       struct net_device_stats stats;
+-
+-       /* version/revision of the SMC91x chip */
+-       int     version;
+-
+-       /* Contains the current active transmission mode */
+-       int     tcr_cur_mode;
+-
+-       /* Contains the current active receive mode */
+-       int     rcr_cur_mode;
+-
+-       /* Contains the current active receive/phy mode */
+-       int     rpc_cur_mode;
+-       int     ctl_rfduplx;
+-       int     ctl_rspeed;
+-
+-       u32     msg_enable;
+-       u32     phy_type;
+-       struct mii_if_info mii;
+-
+-       /* work queue */
+-       struct work_struct phy_configure;
+-       struct net_device *dev;
+-       int     work_pending;
+-
+-       spinlock_t lock;
+-
+-#ifdef SMC_USE_PXA_DMA
+-       /* DMA needs the physical address of the chip */
+-       u_long physaddr;
+-#endif
+-       void __iomem *base;
+-       void __iomem *datacs;
+-};
+-
+ #if SMC_DEBUG > 0
+ #define DBG(n, args...)                                        \
+        do {                                            \
+@@ -2238,17 +2188,19 @@
+                goto out_release_attrib;
+        }
+ 
+-       platform_set_drvdata(pdev, ndev);
+-       ret = smc_probe(ndev, addr);
+-       if (ret != 0)
+-               goto out_iounmap;
+ #ifdef SMC_USE_PXA_DMA
+-       else {
++       {
+                struct smc_local *lp = netdev_priv(ndev);
++               lp->device = &pdev->dev;
+                lp->physaddr = res->start;
+        }
+ #endif
+ 
++       platform_set_drvdata(pdev, ndev);
++       ret = smc_probe(ndev, addr);
++       if (ret != 0)
++               goto out_iounmap;
++
+        smc_request_datacs(pdev, ndev);
+ 
+        return 0;
+Index: linux-2.6.22/drivers/net/smc91x.h
+===================================================================
+--- linux-2.6.22.orig/drivers/net/smc91x.h      2007-09-24 20:57:01.000000000 +0200
++++ linux-2.6.22/drivers/net/smc91x.h   2007-09-24 20:57:20.000000000 +0200
+@@ -461,6 +461,59 @@
+ 
+ #endif
+ 
++
++/* store this information for the driver.. */
++struct smc_local {
++       /*
++        * If I have to wait until memory is available to send a
++        * packet, I will store the skbuff here, until I get the
++        * desired memory.  Then, I'll send it out and free it.
++        */
++       struct sk_buff *pending_tx_skb;
++       struct tasklet_struct tx_task;
++
++       /*
++        * these are things that the kernel wants me to keep, so users
++        * can find out semi-useless statistics of how well the card is
++        * performing
++        */
++       struct net_device_stats stats;
++
++       /* version/revision of the SMC91x chip */
++       int     version;
++
++       /* Contains the current active transmission mode */
++       int     tcr_cur_mode;
++
++       /* Contains the current active receive mode */
++       int     rcr_cur_mode;
++
++       /* Contains the current active receive/phy mode */
++       int     rpc_cur_mode;
++       int     ctl_rfduplx;
++       int     ctl_rspeed;
++
++       u32     msg_enable;
++       u32     phy_type;
++       struct mii_if_info mii;
++
++       /* work queue */
++       struct work_struct phy_configure;
++       struct net_device *dev;
++       int     work_pending;
++
++       spinlock_t lock;
++
++#ifdef SMC_USE_PXA_DMA
++       /* DMA needs the physical address of the chip */
++       u_long physaddr;
++       struct device *device;
++#endif
++       void __iomem *base;
++       void __iomem *datacs;
++};
++
++
+ #ifdef SMC_USE_PXA_DMA
+ /*
+  * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
+@@ -475,11 +528,12 @@
+ #ifdef SMC_insl
+ #undef SMC_insl
+ #define SMC_insl(a, r, p, l) \
+-       smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l)
++       smc_pxa_dma_insl(a, lp, r, dev->dma, p, l)
+ static inline void
+-smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
++smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
+                 u_char *buf, int len)
+ {
++       u_long physaddr = lp->physaddr;
+        dma_addr_t dmabuf;
+ 
+        /* fallback if no DMA available */
+@@ -496,7 +550,7 @@
+        }
+ 
+        len *= 4;
+-       dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
++       dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
+        DCSR(dma) = DCSR_NODESC;
+        DTADR(dma) = dmabuf;
+        DSADR(dma) = physaddr + reg;
+@@ -506,18 +560,19 @@
+        while (!(DCSR(dma) & DCSR_STOPSTATE))
+                cpu_relax();
+        DCSR(dma) = 0;
+-       dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
++       dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
+ }
+ #endif
+ 
+ #ifdef SMC_insw
+ #undef SMC_insw
+ #define SMC_insw(a, r, p, l) \
+-       smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l)
++       smc_pxa_dma_insw(a, lp, r, dev->dma, p, l)
+ static inline void
+-smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
++smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
+                 u_char *buf, int len)
+ {
++       u_long physaddr = lp->physaddr;
+        dma_addr_t dmabuf;
+ 
+        /* fallback if no DMA available */
+@@ -534,7 +589,7 @@
+        }
+ 
+        len *= 2;
+-       dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
++       dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
+        DCSR(dma) = DCSR_NODESC;
+        DTADR(dma) = dmabuf;
+        DSADR(dma) = physaddr + reg;
+@@ -544,7 +599,7 @@
+        while (!(DCSR(dma) & DCSR_STOPSTATE))
+                cpu_relax();
+        DCSR(dma) = 0;
+-       dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
++       dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
+ }
+ #endif
+ 
+Index: linux-2.6.22/drivers/serial/pxa.c
+===================================================================
+--- linux-2.6.22.orig/drivers/serial/pxa.c      2007-09-24 20:57:20.000000000 +0200
++++ linux-2.6.22/drivers/serial/pxa.c   2007-09-24 20:57:20.000000000 +0200
+@@ -42,6 +42,7 @@
+ #include <linux/tty.h>
+ #include <linux/tty_flip.h>
+ #include <linux/serial_core.h>
++#include <linux/clk.h>
+ 
+ #include <asm/io.h>
+ #include <asm/hardware.h>
+@@ -56,7 +57,7 @@
+        unsigned char           lcr;
+        unsigned char           mcr;
+        unsigned int            lsr_break_flag;
+-       unsigned int            cken;
++       struct clk              *clk;
+        char                    *name;
+ };
+ 
+@@ -363,6 +364,8 @@
+        else
+                up->mcr = 0;
+ 
++       up->port.uartclk = clk_get_rate(up->clk);
++
+        /*
+         * Allocate the IRQ
+         */
+@@ -568,9 +571,11 @@
+              unsigned int oldstate)
+ {
+        struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+-       pxa_set_cken(up->cken, !state);
++
+        if (!state)
+-               udelay(1);
++               clk_enable(up->clk);
++       else
++               clk_disable(up->clk);
+ }
+ 
+ static void serial_pxa_release_port(struct uart_port *port)
+@@ -604,7 +609,7 @@
+ 
+ #ifdef CONFIG_SERIAL_PXA_CONSOLE
+ 
+-static struct uart_pxa_port serial_pxa_ports[];
++static struct uart_pxa_port *serial_pxa_ports[4];
+ static struct uart_driver serial_pxa_reg;
+ 
+ #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+@@ -654,9 +659,11 @@
+ static void
+ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
+ {
+-       struct uart_pxa_port *up = &serial_pxa_ports[co->index];
++       struct uart_pxa_port *up = serial_pxa_ports[co->index];
+        unsigned int ier;
+ 
++       clk_enable(up->clk);
++
+        /*
+         *      First save the IER then disable the interrupts
+         */
+@@ -671,6 +678,8 @@
+         */
+        wait_for_xmitr(up);
+        serial_out(up, UART_IER, ier);
++
++       clk_disable(up->clk);
+ }
+ 
+ static int __init
+@@ -684,7 +693,9 @@
+ 
+        if (co->index == -1 || co->index >= serial_pxa_reg.nr)
+                co->index = 0;
+-               up = &serial_pxa_ports[co->index];
++       up = serial_pxa_ports[co->index];
++       if (!up)
++               return -ENODEV;
+ 
+        if (options)
+                uart_parse_options(options, &baud, &parity, &bits, &flow);
+@@ -702,15 +713,6 @@
+        .data           = &serial_pxa_reg,
+ };
+ 
+-static int __init
+-serial_pxa_console_init(void)
+-{
+-       register_console(&serial_pxa_console);
+-       return 0;
+-}
+-
+-console_initcall(serial_pxa_console_init);
+-
+ #define PXA_CONSOLE    &serial_pxa_console
+ #else
+ #define PXA_CONSOLE    NULL
+@@ -736,73 +738,13 @@
+        .verify_port    = serial_pxa_verify_port,
+ };
+ 
+-static struct uart_pxa_port serial_pxa_ports[] = {
+-     { /* FFUART */
+-       .name   = "FFUART",
+-       .cken   = CKEN_FFUART,
+-       .port   = {
+-               .type           = PORT_PXA,
+-               .iotype         = UPIO_MEM,
+-               .membase        = (void *)&FFUART,
+-               .mapbase        = __PREG(FFUART),
+-               .irq            = IRQ_FFUART,
+-               .uartclk        = 921600 * 16,
+-               .fifosize       = 64,
+-               .ops            = &serial_pxa_pops,
+-               .line           = 0,
+-       },
+-  }, { /* BTUART */
+-       .name   = "BTUART",
+-       .cken   = CKEN_BTUART,
+-       .port   = {
+-               .type           = PORT_PXA,
+-               .iotype         = UPIO_MEM,
+-               .membase        = (void *)&BTUART,
+-               .mapbase        = __PREG(BTUART),
+-               .irq            = IRQ_BTUART,
+-               .uartclk        = 921600 * 16,
+-               .fifosize       = 64,
+-               .ops            = &serial_pxa_pops,
+-               .line           = 1,
+-       },
+-  }, { /* STUART */
+-       .name   = "STUART",
+-       .cken   = CKEN_STUART,
+-       .port   = {
+-               .type           = PORT_PXA,
+-               .iotype         = UPIO_MEM,
+-               .membase        = (void *)&STUART,
+-               .mapbase        = __PREG(STUART),
+-               .irq            = IRQ_STUART,
+-               .uartclk        = 921600 * 16,
+-               .fifosize       = 64,
+-               .ops            = &serial_pxa_pops,
+-               .line           = 2,
+-       },
+-  }, {  /* HWUART */
+-       .name   = "HWUART",
+-       .cken   = CKEN_HWUART,
+-       .port = {
+-               .type           = PORT_PXA,
+-               .iotype         = UPIO_MEM,
+-               .membase        = (void *)&HWUART,
+-               .mapbase        = __PREG(HWUART),
+-               .irq            = IRQ_HWUART,
+-               .uartclk        = 921600 * 16,
+-               .fifosize       = 64,
+-               .ops            = &serial_pxa_pops,
+-               .line           = 3,
+-       },
+-  }
+-};
+-
+ static struct uart_driver serial_pxa_reg = {
+        .owner          = THIS_MODULE,
+        .driver_name    = "PXA serial",
+        .dev_name       = "ttyS",
+        .major          = TTY_MAJOR,
+        .minor          = 64,
+-       .nr             = ARRAY_SIZE(serial_pxa_ports),
++       .nr             = 4,
+        .cons           = PXA_CONSOLE,
+ };
+ 
+@@ -828,10 +770,68 @@
+ 
+ static int serial_pxa_probe(struct platform_device *dev)
+ {
+-       serial_pxa_ports[dev->id].port.dev = &dev->dev;
+-       uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
+-       platform_set_drvdata(dev, &serial_pxa_ports[dev->id]);
++       struct uart_pxa_port *sport;
++       struct resource *mmres, *irqres;
++       int ret;
++
++       mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
++       irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
++       if (!mmres || !irqres)
++               return -ENODEV;
++
++       sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
++       if (!sport)
++               return -ENOMEM;
++
++       sport->clk = clk_get(&dev->dev, "UARTCLK");
++       if (IS_ERR(sport->clk)) {
++               ret = PTR_ERR(sport->clk);
++               goto err_free;
++       }
++
++       sport->port.type = PORT_PXA;
++       sport->port.iotype = UPIO_MEM;
++       sport->port.mapbase = mmres->start;
++       sport->port.irq = irqres->start;
++       sport->port.fifosize = 64;
++       sport->port.ops = &serial_pxa_pops;
++       sport->port.line = dev->id;
++       sport->port.dev = &dev->dev;
++       sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
++       sport->port.uartclk = clk_get_rate(sport->clk);
++
++       /*
++        * Is it worth keeping this?
++        */
++       if (mmres->start == __PREG(FFUART))
++               sport->name = "FFUART";
++       else if (mmres->start == __PREG(BTUART))
++               sport->name = "BTUART";
++       else if (mmres->start == __PREG(STUART))
++               sport->name = "STUART";
++       else if (mmres->start == __PREG(HWUART))
++               sport->name = "HWUART";
++       else
++               sport->name = "???";
++
++       sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
++       if (!sport->port.membase) {
++               ret = -ENOMEM;
++               goto err_clk;
++       }
++
++       serial_pxa_ports[dev->id] = sport;
++
++       uart_add_one_port(&serial_pxa_reg, &sport->port);
++       platform_set_drvdata(dev, sport);
++
+        return 0;
++
++ err_clk:
++       clk_put(sport->clk);
++ err_free:
++       kfree(sport);
++       return ret;
+ }
+ 
+ static int serial_pxa_remove(struct platform_device *dev)
+@@ -840,8 +840,9 @@
+ 
+        platform_set_drvdata(dev, NULL);
+ 
+-       if (sport)
+-               uart_remove_one_port(&serial_pxa_reg, &sport->port);
++       uart_remove_one_port(&serial_pxa_reg, &sport->port);
++       clk_put(sport->clk);
++       kfree(sport);
+ 
+        return 0;
+ }
+Index: linux-2.6.22/drivers/serial/serial_core.c
+===================================================================
+--- linux-2.6.22.orig/drivers/serial/serial_core.c      2007-09-24 20:57:19.000000000 +0200
++++ linux-2.6.22/drivers/serial/serial_core.c   2007-09-24 20:57:20.000000000 +0200
+@@ -2128,6 +2128,14 @@
+                spin_unlock_irqrestore(&port->lock, flags);
+ 
+                /*
++                * If this driver supports console, and it hasn't been
++                * successfully registered yet, try to re-register it.
++                * It may be that the port was not available.
++                */
++               if (port->cons && !(port->cons->flags & CON_ENABLED))
++                       register_console(port->cons);
++
++               /*
+                 * Power down all ports by default, except the
+                 * console if we have one.
+                 */
+@@ -2288,6 +2296,7 @@
+        }
+ 
+        state->port = port;
++       state->pm_state = -1;
+ 
+        port->cons = drv->cons;
+        port->info = state->info;
+@@ -2310,15 +2319,6 @@
+        tty_register_device(drv->tty_driver, port->line, port->dev);
+ 
+        /*
+-        * If this driver supports console, and it hasn't been
+-        * successfully registered yet, try to re-register it.
+-        * It may be that the port was not available.
+-        */
+-       if (port->type != PORT_UNKNOWN &&
+-           port->cons && !(port->cons->flags & CON_ENABLED))
+-               register_console(port->cons);
+-
+-       /*
+         * Ensure UPF_DEAD is not set.
+         */
+        port->flags &= ~UPF_DEAD;
+Index: linux-2.6.22/drivers/usb/gadget/pxa2xx_udc.c
+===================================================================
+--- linux-2.6.22.orig/drivers/usb/gadget/pxa2xx_udc.c   2007-09-24 20:57:04.000000000 +0200
++++ linux-2.6.22/drivers/usb/gadget/pxa2xx_udc.c        2007-09-24 20:57:20.000000000 +0200
+@@ -43,6 +43,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/irq.h>
++#include <linux/clk.h>
++#include <linux/err.h>
+ 
+ #include <asm/byteorder.h>
+ #include <asm/dma.h>
+@@ -1157,7 +1159,7 @@
+ 
+ #ifdef CONFIG_ARCH_PXA
+         /* Disable clock for USB device */
+-       pxa_set_cken(CKEN_USB, 0);
++       clk_disable(dev->clk);
+ #endif
+ 
+        ep0_idle (dev);
+@@ -1202,8 +1204,7 @@
+ 
+ #ifdef CONFIG_ARCH_PXA
+         /* Enable clock for USB device */
+-       pxa_set_cken(CKEN_USB, 1);
+-       udelay(5);
++       clk_enable(dev->clk);
+ #endif
+ 
+        /* try to clear these bits before we enable the udc */
+@@ -2137,6 +2138,14 @@
+        if (irq < 0)
+                return -ENODEV;
+ 
++#ifdef CONFIG_ARCH_PXA
++       dev->clk = clk_get(&pdev->dev, "UDCCLK");
++       if (IS_ERR(dev->clk)) {
++               retval = PTR_ERR(dev->clk);
++               goto err_clk;
++       }
++#endif
++
+        pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
+                dev->has_cfr ? "" : " (!cfr)",
+                SIZE_STR "(pio)"
+@@ -2152,11 +2161,10 @@
+                        dev_dbg(&pdev->dev,
+                                "can't get vbus gpio %d, err: %d\n",
+                                dev->mach->gpio_vbus, retval);
+-                       return -EBUSY;
++                       goto err_gpio_vbus;
+                }
+                gpio_direction_input(dev->mach->gpio_vbus);
+                vbus_irq = gpio_to_irq(dev->mach->gpio_vbus);
+-               set_irq_type(vbus_irq, IRQT_BOTHEDGE);
+        } else
+                vbus_irq = 0;
+ 
+@@ -2166,9 +2174,7 @@
+                        dev_dbg(&pdev->dev,
+                                "can't get pullup gpio %d, err: %d\n",
+                                dev->mach->gpio_pullup, retval);
+-                       if (dev->mach->gpio_vbus)
+-                               gpio_free(dev->mach->gpio_vbus);
+-                       return -EBUSY;
++                       goto err_gpio_pullup;
+                }
+                gpio_direction_output(dev->mach->gpio_pullup, 0);
+        }
+@@ -2195,11 +2201,7 @@
+        if (retval != 0) {
+                printk(KERN_ERR "%s: can't get irq %d, err %d\n",
+                        driver_name, irq, retval);
+-               if (dev->mach->gpio_pullup)
+-                       gpio_free(dev->mach->gpio_pullup);
+-               if (dev->mach->gpio_vbus)
+-                       gpio_free(dev->mach->gpio_vbus);
+-               return -EBUSY;
++               goto err_irq1;
+        }
+        dev->got_irq = 1;
+ 
+@@ -2213,12 +2215,7 @@
+                        printk(KERN_ERR "%s: can't get irq %i, err %d\n",
+                                driver_name, LUBBOCK_USB_DISC_IRQ, retval);
+ lubbock_fail0:
+-                       free_irq(irq, dev);
+-                       if (dev->mach->gpio_pullup)
+-                               gpio_free(dev->mach->gpio_pullup);
+-                       if (dev->mach->gpio_vbus)
+-                               gpio_free(dev->mach->gpio_vbus);
+-                       return -EBUSY;
++                       goto err_irq_lub;
+                }
+                retval = request_irq(LUBBOCK_USB_IRQ,
+                                lubbock_vbus_irq,
+@@ -2234,22 +2231,37 @@
+ #endif
+        if (vbus_irq) {
+                retval = request_irq(vbus_irq, udc_vbus_irq,
+-                               IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
++                               IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
++                               IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                                driver_name, dev);
+                if (retval != 0) {
+                        printk(KERN_ERR "%s: can't get irq %i, err %d\n",
+                                driver_name, vbus_irq, retval);
+-                       free_irq(irq, dev);
+-                       if (dev->mach->gpio_pullup)
+-                               gpio_free(dev->mach->gpio_pullup);
+-                       if (dev->mach->gpio_vbus)
+-                               gpio_free(dev->mach->gpio_vbus);
+-                       return -EBUSY;
++                       goto err_vbus_irq;
+                }
+        }
+        create_proc_files();
+ 
+        return 0;
++
++ err_vbus_irq:
++#ifdef CONFIG_ARCH_LUBBOCK
++       free_irq(LUBBOCK_USB_DISC_IRQ, dev);
++ err_irq_lub:
++#endif
++       free_irq(irq, dev);
++ err_irq1:
++       if (dev->mach->gpio_pullup)
++               gpio_free(dev->mach->gpio_pullup);
++ err_gpio_pullup:
++       if (dev->mach->gpio_vbus)
++               gpio_free(dev->mach->gpio_vbus);
++ err_gpio_vbus:
++#ifdef CONFIG_ARCH_PXA
++       clk_put(dev->clk);
++ err_clk:
++#endif
++       return retval;
+ }
+ 
+ static void pxa2xx_udc_shutdown(struct platform_device *_dev)
+@@ -2284,6 +2296,10 @@
+        if (dev->mach->gpio_pullup)
+                gpio_free(dev->mach->gpio_pullup);
+ 
++#ifdef CONFIG_ARCH_PXA
++       clk_put(dev->clk);
++#endif
++
+        platform_set_drvdata(pdev, NULL);
+        the_controller = NULL;
+        return 0;
+Index: linux-2.6.22/drivers/usb/gadget/pxa2xx_udc.h
+===================================================================
+--- linux-2.6.22.orig/drivers/usb/gadget/pxa2xx_udc.h   2007-09-24 20:57:17.000000000 +0200
++++ linux-2.6.22/drivers/usb/gadget/pxa2xx_udc.h        2007-09-24 20:57:20.000000000 +0200
+@@ -125,6 +125,7 @@
+        struct timer_list                       timer;
+ 
+        struct device                           *dev;
++       struct clk                              *clk;
+        struct pxa2xx_udc_mach_info             *mach;
+        u64                                     dma_mask;
+        struct pxa2xx_ep                        ep [PXA_UDC_NUM_ENDPOINTS];
+Index: linux-2.6.22/drivers/video/pxafb.c
+===================================================================
+--- linux-2.6.22.orig/drivers/video/pxafb.c     2007-09-24 20:57:18.000000000 +0200
++++ linux-2.6.22/drivers/video/pxafb.c  2007-09-24 20:57:20.000000000 +0200
+@@ -37,6 +37,8 @@
+ #include <linux/cpufreq.h>
+ #include <linux/platform_device.h>
+ #include <linux/dma-mapping.h>
++#include <linux/clk.h>
++#include <linux/err.h>
+ 
+ #include <asm/hardware.h>
+ #include <asm/io.h>
+@@ -574,15 +576,15 @@
+  *
+  * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
+  */
+-static inline unsigned int get_pcd(unsigned int pixclock)
++static inline unsigned int get_pcd(struct pxafb_info *fbi, unsigned int pixclock)
+ {
+        unsigned long long pcd;
+ 
+        /* FIXME: Need to take into account Double Pixel Clock mode
+-         * (DPC) bit? or perhaps set it based on the various clock
+-         * speeds */
+-
+-       pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock;
++        * (DPC) bit? or perhaps set it based on the various clock
++        * speeds */
++       pcd = (unsigned long long)(clk_get_rate(fbi->clk) / 10000);
++       pcd *= pixclock;
+        do_div(pcd, 100000000 * 2);
+        /* no need for this, since we should subtract 1 anyway. they cancel */
+        /* pcd += 1; */ /* make up for integer math truncations */
+@@ -591,19 +593,21 @@
+ 
+ /*
+  * Some touchscreens need hsync information from the video driver to
+- * function correctly. We export it here.
++ * function correctly. We export it here.  Note that 'hsync_time' and
++ * the value returned from pxafb_get_hsync_time() is the *reciprocal*
++ * of the hsync period in seconds.
+  */
+ static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd)
+ {
+-       unsigned long long htime;
++       unsigned long htime;
+ 
+        if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) {
+                fbi->hsync_time=0;
+                return;
+        }
+ 
+-       htime = (unsigned long long)get_lcdclk_frequency_10khz() * 10000;
+-       do_div(htime, pcd * fbi->fb.var.hsync_len);
++       htime = clk_get_rate(fbi->clk) / (pcd * fbi->fb.var.hsync_len);
++
+        fbi->hsync_time = htime;
+ }
+ 
+@@ -628,7 +632,7 @@
+ {
+        struct pxafb_lcd_reg new_regs;
+        u_long flags;
+-       u_int lines_per_panel, pcd = get_pcd(var->pixclock);
++       u_int lines_per_panel, pcd = get_pcd(fbi, var->pixclock);
+ 
+        pr_debug("pxafb: Configuring PXA LCD\n");
+ 
+@@ -908,7 +912,7 @@
+        pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
+ 
+        /* enable LCD controller clock */
+-       pxa_set_cken(CKEN_LCD, 1);
++       clk_enable(fbi->clk);
+ 
+        down(&fcs_lcd_sem);
+        /* Sequence from 11.7.10 */
+@@ -950,7 +954,7 @@
+        up(&fcs_lcd_sem);
+ 
+        /* disable LCD controller clock */
+-       pxa_set_cken(CKEN_LCD, 0);
++       clk_disable(fbi->clk);
+ }
+ 
+ /*
+@@ -1161,7 +1165,7 @@
+                if ((clkinfo->old == 13000))
+                        break;
+ 
+-               pcd = get_pcd(fbi->fb.var.pixclock);
++               pcd = get_pcd(fbi, fbi->fb.var.pixclock);
+                lccr3 = fbi->reg_lccr3;
+                set_hsync_time(fbi, pcd);
+                fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
+@@ -1293,6 +1297,12 @@
+        memset(fbi, 0, sizeof(struct pxafb_info));
+        fbi->dev = dev;
+ 
++       fbi->clk = clk_get(dev, "LCDCLK");
++       if (IS_ERR(fbi->clk)) {
++               kfree(fbi);
++               return NULL;
++       }
++
+        strcpy(fbi->fb.fix.id, PXA_NAME);
+ 
+        fbi->fb.fix.type        = FB_TYPE_PACKED_PIXELS;
+Index: linux-2.6.22/drivers/video/pxafb.h
+===================================================================
+--- linux-2.6.22.orig/drivers/video/pxafb.h     2007-09-24 20:57:18.000000000 +0200
++++ linux-2.6.22/drivers/video/pxafb.h  2007-09-24 20:57:20.000000000 +0200
+@@ -94,6 +94,7 @@
+ struct pxafb_info {
+        struct fb_info          fb;
+        struct device           *dev;
++       struct clk              *clk;
+ 
+        /*
+         * These are the addresses we mapped
+Index: linux-2.6.22/include/asm-arm/arch-pxa/hardware.h
+===================================================================
+--- linux-2.6.22.orig/include/asm-arm/arch-pxa/hardware.h       2007-09-24 20:57:09.000000000 +0200
++++ linux-2.6.22/include/asm-arm/arch-pxa/hardware.h    2007-09-24 20:57:20.000000000 +0200
+@@ -80,6 +80,24 @@
+                _id == 0x411;                           \
+        })
+ 
++#define __cpu_is_pxa300(id)                            \
++       ({                                              \
++               unsigned int _id = (id) >> 4 & 0xfff;   \
++               _id == 0x688;                           \
++        })
++
++#define __cpu_is_pxa310(id)                            \
++       ({                                              \
++               unsigned int _id = (id) >> 4 & 0xfff;   \
++               _id == 0x689;                           \
++        })
++
++#define __cpu_is_pxa320(id)                            \
++       ({                                              \
++               unsigned int _id = (id) >> 4 & 0xfff;   \
++               _id == 0x603 || _id == 0x682;           \
++        })
++
+ #define cpu_is_pxa21x()                                        \
+        ({                                              \
+                unsigned int id = read_cpuid(CPUID_ID); \
+@@ -98,6 +116,53 @@
+                __cpu_is_pxa27x(id);                    \
+        })
+ 
++#define cpu_is_pxa300()                                        \
++       ({                                              \
++               unsigned int id = read_cpuid(CPUID_ID); \
++               __cpu_is_pxa300(id);                    \
++        })
++
++#define cpu_is_pxa310()                                        \
++       ({                                              \
++               unsigned int id = read_cpuid(CPUID_ID); \
++               __cpu_is_pxa310(id);                    \
++        })
++
++#define cpu_is_pxa320()                                        \
++       ({                                              \
++               unsigned int id = read_cpuid(CPUID_ID); \
++               __cpu_is_pxa320(id);                    \
++        })
++
++/*
++ * CPUID Core Generation Bit
++ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
++ * == 0x3 for pxa300/pxa310/pxa320
++ */
++#define __cpu_is_pxa2xx(id)                            \
++       ({                                              \
++               unsigned int _id = (id) >> 13 & 0x7;    \
++               _id <= 0x2;                             \
++        })
++
++#define __cpu_is_pxa3xx(id)                            \
++       ({                                              \
++               unsigned int _id = (id) >> 13 & 0x7;    \
++               _id == 0x3;                             \
++        })
++
++#define cpu_is_pxa2xx()                                        \
++       ({                                              \
++               unsigned int id = read_cpuid(CPUID_ID); \
++               __cpu_is_pxa2xx(id);                    \
++        })
++
++#define cpu_is_pxa3xx()                                        \
++       ({                                              \
++               unsigned int id = read_cpuid(CPUID_ID); \
++               __cpu_is_pxa3xx(id);                    \
++        })
++
+ /*
+  * Handy routine to set GPIO alternate functions
+  */
+@@ -116,13 +181,16 @@
+ /*
+  * Routine to enable or disable CKEN
+  */
+-extern void pxa_set_cken(int clock, int enable);
++static inline void __deprecated pxa_set_cken(int clock, int enable)
++{
++       extern void __pxa_set_cken(int clock, int enable);
++       __pxa_set_cken(clock, enable);
++}
+ 
+ /*
+  * return current memory and LCD clock frequency in units of 10kHz
+  */
+ extern unsigned int get_memclk_frequency_10khz(void);
+-extern unsigned int get_lcdclk_frequency_10khz(void);
+ 
+ #endif
+ 
+Index: linux-2.6.22/include/asm-arm/arch-pxa/irqs.h
+===================================================================
+--- linux-2.6.22.orig/include/asm-arm/arch-pxa/irqs.h   2007-09-24 20:57:20.000000000 +0200
++++ linux-2.6.22/include/asm-arm/arch-pxa/irqs.h        2007-09-24 20:57:20.000000000 +0200
+@@ -66,12 +66,6 @@
+ #define IRQ_TO_GPIO_2_x(i)     ((i) - PXA_GPIO_IRQ_BASE)
+ #define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+ 
+-#if defined(CONFIG_PXA25x)
+-#define PXA_LAST_GPIO  84
+-#elif defined(CONFIG_PXA27x)
+-#define PXA_LAST_GPIO  127
+-#endif
+-
+ /*
+  * The next 16 interrupts are for board specific purposes.  Since
+  * the kernel can only run on one machine at a time, we can re-use
+Index: linux-2.6.22/include/asm-arm/arch-pxa/mfp-pxa300.h
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/include/asm-arm/arch-pxa/mfp-pxa300.h  2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,574 @@
++/*
++ * linux/include/asm-arm/arch-pxa/mfp-pxa300.h
++ *
++ * PXA300/PXA310 specific MFP configuration definitions
++ *
++ * Copyright (C) 2007 Marvell International Ltd.
++ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
++ *             initial version
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ */
++
++#ifndef __ASM_ARCH_MFP_PXA300_H
++#define __ASM_ARCH_MFP_PXA300_H
++
++#include <asm/arch/mfp.h>
++
++/* GPIO */
++#define GPIO46_GPIO            MFP_CFG(GPIO46, AF1)
++#define GPIO49_GPIO            MFP_CFG(GPIO49, AF3)
++#define GPIO50_GPIO            MFP_CFG(GPIO50, AF2)
++#define GPIO51_GPIO            MFP_CFG(GPIO51, AF3)
++#define GPIO52_GPIO            MFP_CFG(GPIO52, AF3)
++#define GPIO56_GPIO            MFP_CFG(GPIO56, AF0)
++#define GPIO58_GPIO            MFP_CFG(GPIO58, AF0)
++#define GPIO59_GPIO            MFP_CFG(GPIO59, AF0)
++#define GPIO60_GPIO            MFP_CFG(GPIO60, AF0)
++#define GPIO61_GPIO            MFP_CFG(GPIO61, AF0)
++#define GPIO62_GPIO            MFP_CFG(GPIO62, AF0)
++
++#ifdef CONFIG_CPU_PXA310
++#define GPIO7_2_GPIO           MFP_CFG(GPIO7_2, AF0)
++#define GPIO8_2_GPIO           MFP_CFG(GPIO8_2, AF0)
++#define GPIO9_2_GPIO           MFP_CFG(GPIO9_2, AF0)
++#define GPIO10_2_GPIO          MFP_CFG(GPIO10_2, AF0)
++#define GPIO11_2_GPIO          MFP_CFG(GPIO11_2, AF0)
++#define GPIO12_2_GPIO          MFP_CFG(GPIO12_2, AF0)
++#endif
++
++/* Chip Select */
++#define GPIO2_nCS3             MFP_CFG(GPIO2,  AF1)
++
++/* AC97 */
++#define GPIO23_AC97_nACRESET   MFP_CFG(GPIO23, AF1)
++#define GPIO24_AC97_SYSCLK     MFP_CFG(GPIO24, AF1)
++#define GPIO29_AC97_BITCLK     MFP_CFG(GPIO29, AF1)
++#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1)
++#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1)
++#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3)
++#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2)
++#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3)
++#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2)
++#define GPIO27_AC97_SDATA_OUT  MFP_CFG(GPIO27, AF1)
++#define GPIO28_AC97_SYNC       MFP_CFG(GPIO28, AF1)
++
++/* I2C */
++#define GPIO21_I2C_SCL         MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
++#define GPIO22_I2C_SDA         MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
++
++/* QCI */
++#define GPIO39_CI_DD_0         MFP_CFG_DRV(GPIO39, AF1, DS04X)
++#define GPIO40_CI_DD_1         MFP_CFG_DRV(GPIO40, AF1, DS04X)
++#define GPIO41_CI_DD_2         MFP_CFG_DRV(GPIO41, AF1, DS04X)
++#define GPIO42_CI_DD_3         MFP_CFG_DRV(GPIO42, AF1, DS04X)
++#define GPIO43_CI_DD_4         MFP_CFG_DRV(GPIO43, AF1, DS04X)
++#define GPIO44_CI_DD_5         MFP_CFG_DRV(GPIO44, AF1, DS04X)
++#define GPIO45_CI_DD_6         MFP_CFG_DRV(GPIO45, AF1, DS04X)
++#define GPIO46_CI_DD_7         MFP_CFG_DRV(GPIO46, AF0, DS04X)
++#define GPIO47_CI_DD_8         MFP_CFG_DRV(GPIO47, AF1, DS04X)
++#define GPIO48_CI_DD_9         MFP_CFG_DRV(GPIO48, AF1, DS04X)
++#define GPIO52_CI_HSYNC                MFP_CFG_DRV(GPIO52, AF0, DS04X)
++#define GPIO51_CI_VSYNC                MFP_CFG_DRV(GPIO51, AF0, DS04X)
++#define GPIO49_CI_MCLK         MFP_CFG_DRV(GPIO49, AF0, DS04X)
++#define GPIO50_CI_PCLK         MFP_CFG_DRV(GPIO50, AF0, DS04X)
++
++/* KEYPAD */
++#define GPIO3_KP_DKIN_6                MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
++#define GPIO4_KP_DKIN_7                MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
++#define GPIO16_KP_DKIN_6       MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
++#define GPIO83_KP_DKIN_2       MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
++#define GPIO84_KP_DKIN_1       MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
++#define GPIO85_KP_DKIN_0       MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
++#define GPIO86_KP_DKIN_1       MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
++#define GPIO87_KP_DKIN_2       MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
++#define GPIO88_KP_DKIN_3       MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
++#define GPIO89_KP_DKIN_3       MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
++#define GPIO107_KP_DKIN_0      MFP_CFG_LPM(GPIO107, AF2, FLOAT)
++#define GPIO108_KP_DKIN_1      MFP_CFG_LPM(GPIO108, AF2, FLOAT)
++#define GPIO109_KP_DKIN_2      MFP_CFG_LPM(GPIO109, AF2, FLOAT)
++#define GPIO110_KP_DKIN_3      MFP_CFG_LPM(GPIO110, AF2, FLOAT)
++#define GPIO111_KP_DKIN_4      MFP_CFG_LPM(GPIO111, AF2, FLOAT)
++#define GPIO112_KP_DKIN_5      MFP_CFG_LPM(GPIO112, AF2, FLOAT)
++#define GPIO113_KP_DKIN_6      MFP_CFG_LPM(GPIO113, AF2, FLOAT)
++#define GPIO114_KP_DKIN_7      MFP_CFG_LPM(GPIO114, AF2, FLOAT)
++#define GPIO115_KP_DKIN_0      MFP_CFG_LPM(GPIO115, AF2, FLOAT)
++#define GPIO116_KP_DKIN_1      MFP_CFG_LPM(GPIO116, AF2, FLOAT)
++#define GPIO117_KP_DKIN_2      MFP_CFG_LPM(GPIO117, AF2, FLOAT)
++#define GPIO118_KP_DKIN_3      MFP_CFG_LPM(GPIO118, AF2, FLOAT)
++#define GPIO119_KP_DKIN_4      MFP_CFG_LPM(GPIO119, AF2, FLOAT)
++#define GPIO120_KP_DKIN_5      MFP_CFG_LPM(GPIO120, AF2, FLOAT)
++#define GPIO121_KP_DKIN_6      MFP_CFG_LPM(GPIO121, AF2, FLOAT)
++#define GPIO122_KP_DKIN_5      MFP_CFG_LPM(GPIO122, AF2, FLOAT)
++#define GPIO123_KP_DKIN_4      MFP_CFG_LPM(GPIO123, AF2, FLOAT)
++#define GPIO124_KP_DKIN_3      MFP_CFG_LPM(GPIO124, AF2, FLOAT)
++#define GPIO127_KP_DKIN_0      MFP_CFG_LPM(GPIO127, AF5, FLOAT)
++#define GPIO0_2_KP_DKIN_0      MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
++#define GPIO1_2_KP_DKIN_1      MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
++#define GPIO2_2_KP_DKIN_6      MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
++#define GPIO3_2_KP_DKIN_7      MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
++#define GPIO4_2_KP_DKIN_1      MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
++#define GPIO5_2_KP_DKIN_0      MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
++
++#define GPIO5_KP_MKIN_0                MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
++#define GPIO6_KP_MKIN_1                MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
++#define GPIO9_KP_MKIN_6                MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
++#define GPIO10_KP_MKIN_7       MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
++#define GPIO70_KP_MKIN_6       MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
++#define GPIO71_KP_MKIN_7       MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
++#define GPIO100_KP_MKIN_6      MFP_CFG_LPM(GPIO100, AF7, FLOAT)
++#define GPIO101_KP_MKIN_7      MFP_CFG_LPM(GPIO101, AF7, FLOAT)
++#define GPIO112_KP_MKIN_6      MFP_CFG_LPM(GPIO112, AF4, FLOAT)
++#define GPIO113_KP_MKIN_7      MFP_CFG_LPM(GPIO113, AF4, FLOAT)
++#define GPIO115_KP_MKIN_0      MFP_CFG_LPM(GPIO115, AF1, FLOAT)
++#define GPIO116_KP_MKIN_1      MFP_CFG_LPM(GPIO116, AF1, FLOAT)
++#define GPIO117_KP_MKIN_2      MFP_CFG_LPM(GPIO117, AF1, FLOAT)
++#define GPIO118_KP_MKIN_3      MFP_CFG_LPM(GPIO118, AF1, FLOAT)
++#define GPIO119_KP_MKIN_4      MFP_CFG_LPM(GPIO119, AF1, FLOAT)
++#define GPIO120_KP_MKIN_5      MFP_CFG_LPM(GPIO120, AF1, FLOAT)
++#define GPIO125_KP_MKIN_2      MFP_CFG_LPM(GPIO125, AF2, FLOAT)
++#define GPIO2_2_KP_MKIN_6      MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
++#define GPIO3_2_KP_MKIN_7      MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
++
++#define GPIO7_KP_MKOUT_5       MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
++#define GPIO11_KP_MKOUT_5      MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
++#define GPIO12_KP_MKOUT_6      MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
++#define GPIO13_KP_MKOUT_7      MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
++#define GPIO19_KP_MKOUT_4      MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
++#define GPIO20_KP_MKOUT_5      MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
++#define GPIO38_KP_MKOUT_5      MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
++#define GPIO53_KP_MKOUT_6      MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
++#define GPIO78_KP_MKOUT_7      MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
++#define GPIO85_KP_MKOUT_0      MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
++#define GPIO86_KP_MKOUT_1      MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
++#define GPIO87_KP_MKOUT_2      MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
++#define GPIO88_KP_MKOUT_3      MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
++#define GPIO104_KP_MKOUT_6     MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
++#define GPIO105_KP_MKOUT_7     MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
++#define GPIO121_KP_MKOUT_0     MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
++#define GPIO122_KP_MKOUT_1     MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
++#define GPIO123_KP_MKOUT_2     MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
++#define GPIO124_KP_MKOUT_3     MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
++#define GPIO125_KP_MKOUT_4     MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
++#define GPIO126_KP_MKOUT_7     MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
++#define GPIO5_2_KP_MKOUT_6     MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
++#define GPIO4_2_KP_MKOUT_5     MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
++#define GPIO6_2_KP_MKOUT_7     MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
++
++/* LCD */
++#define GPIO54_LCD_LDD_0       MFP_CFG_DRV(GPIO54, AF1, DS01X)
++#define GPIO55_LCD_LDD_1       MFP_CFG_DRV(GPIO55, AF1, DS01X)
++#define GPIO56_LCD_LDD_2       MFP_CFG_DRV(GPIO56, AF1, DS01X)
++#define GPIO57_LCD_LDD_3       MFP_CFG_DRV(GPIO57, AF1, DS01X)
++#define GPIO58_LCD_LDD_4       MFP_CFG_DRV(GPIO58, AF1, DS01X)
++#define GPIO59_LCD_LDD_5       MFP_CFG_DRV(GPIO59, AF1, DS01X)
++#define GPIO60_LCD_LDD_6       MFP_CFG_DRV(GPIO60, AF1, DS01X)
++#define GPIO61_LCD_LDD_7       MFP_CFG_DRV(GPIO61, AF1, DS01X)
++#define GPIO62_LCD_LDD_8       MFP_CFG_DRV(GPIO62, AF1, DS01X)
++#define GPIO63_LCD_LDD_9       MFP_CFG_DRV(GPIO63, AF1, DS01X)
++#define GPIO64_LCD_LDD_10      MFP_CFG_DRV(GPIO64, AF1, DS01X)
++#define GPIO65_LCD_LDD_11      MFP_CFG_DRV(GPIO65, AF1, DS01X)
++#define GPIO66_LCD_LDD_12      MFP_CFG_DRV(GPIO66, AF1, DS01X)
++#define GPIO67_LCD_LDD_13      MFP_CFG_DRV(GPIO67, AF1, DS01X)
++#define GPIO68_LCD_LDD_14      MFP_CFG_DRV(GPIO68, AF1, DS01X)
++#define GPIO69_LCD_LDD_15      MFP_CFG_DRV(GPIO69, AF1, DS01X)
++#define GPIO70_LCD_LDD_16      MFP_CFG_DRV(GPIO70, AF1, DS01X)
++#define GPIO71_LCD_LDD_17      MFP_CFG_DRV(GPIO71, AF1, DS01X)
++#define GPIO62_LCD_CS_N                MFP_CFG_DRV(GPIO62, AF2, DS01X)
++#define GPIO72_LCD_FCLK                MFP_CFG_DRV(GPIO72, AF1, DS01X)
++#define GPIO73_LCD_LCLK                MFP_CFG_DRV(GPIO73, AF1, DS01X)
++#define GPIO74_LCD_PCLK                MFP_CFG_DRV(GPIO74, AF1, DS01X)
++#define GPIO75_LCD_BIAS                MFP_CFG_DRV(GPIO75, AF1, DS01X)
++#define GPIO76_LCD_VSYNC       MFP_CFG_DRV(GPIO76, AF2, DS01X)
++
++#define GPIO15_LCD_CS_N                MFP_CFG_DRV(GPIO15,  AF2, DS01X)
++#define GPIO127_LCD_CS_N       MFP_CFG_DRV(GPIO127, AF1, DS01X)
++#define GPIO63_LCD_VSYNC       MFP_CFG_DRV(GPIO63,  AF2, DS01X)
++
++/* Mini-LCD */
++#define GPIO72_MLCD_FCLK       MFP_CFG_DRV(GPIO72, AF7, DS08X)
++#define GPIO73_MLCD_LCLK       MFP_CFG_DRV(GPIO73, AF7, DS08X)
++#define GPIO54_MLCD_LDD_0      MFP_CFG_DRV(GPIO54, AF7, DS08X)
++#define GPIO55_MLCD_LDD_1      MFP_CFG_DRV(GPIO55, AF7, DS08X)
++#define GPIO56_MLCD_LDD_2      MFP_CFG_DRV(GPIO56, AF7, DS08X)
++#define GPIO57_MLCD_LDD_3      MFP_CFG_DRV(GPIO57, AF7, DS08X)
++#define GPIO58_MLCD_LDD_4      MFP_CFG_DRV(GPIO58, AF7, DS08X)
++#define GPIO59_MLCD_LDD_5      MFP_CFG_DRV(GPIO59, AF7, DS08X)
++#define GPIO60_MLCD_LDD_6      MFP_CFG_DRV(GPIO60, AF7, DS08X)
++#define GPIO61_MLCD_LDD_7      MFP_CFG_DRV(GPIO61, AF7, DS08X)
++#define GPIO62_MLCD_LDD_8      MFP_CFG_DRV(GPIO62, AF7, DS08X)
++#define GPIO63_MLCD_LDD_9      MFP_CFG_DRV(GPIO63, AF7, DS08X)
++#define GPIO64_MLCD_LDD_10     MFP_CFG_DRV(GPIO64, AF7, DS08X)
++#define GPIO65_MLCD_LDD_11     MFP_CFG_DRV(GPIO65, AF7, DS08X)
++#define GPIO66_MLCD_LDD_12     MFP_CFG_DRV(GPIO66, AF7, DS08X)
++#define GPIO67_MLCD_LDD_13     MFP_CFG_DRV(GPIO67, AF7, DS08X)
++#define GPIO68_MLCD_LDD_14     MFP_CFG_DRV(GPIO68, AF7, DS08X)
++#define GPIO69_MLCD_LDD_15     MFP_CFG_DRV(GPIO69, AF7, DS08X)
++#define GPIO74_MLCD_PCLK       MFP_CFG_DRV(GPIO74, AF7, DS08X)
++#define GPIO75_MLCD_BIAS       MFP_CFG_DRV(GPIO75, AF2, DS08X)
++
++/* MMC1 */
++#define GPIO7_MMC1_CLK         MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
++#define GPIO8_MMC1_CMD         MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
++#define GPIO14_MMC1_CMD                MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
++#define GPIO15_MMC1_CMD                MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
++#define GPIO3_MMC1_DAT0                MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
++#define GPIO4_MMC1_DAT1                MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
++#define GPIO5_MMC1_DAT2                MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
++#define GPIO6_MMC1_DAT3                MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
++
++/* MMC2 */
++#define GPIO9_MMC2_DAT0                MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
++#define GPIO10_MMC2_DAT1       MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
++#define GPIO11_MMC2_DAT2       MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
++#define GPIO12_MMC2_DAT3       MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
++#define GPIO13_MMC2_CLK                MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
++#define GPIO14_MMC2_CMD                MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
++#define GPIO77_MMC2_DAT0       MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
++#define GPIO78_MMC2_DAT1       MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
++#define GPIO79_MMC2_DAT2       MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
++#define GPIO80_MMC2_DAT3       MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
++#define GPIO81_MMC2_CLK                MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
++#define GPIO82_MMC2_CMD                MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
++
++/* SSP1 */
++#define GPIO89_SSP1_EXTCLK     MFP_CFG(GPIO89, AF1)
++#define GPIO90_SSP1_SYSCLK     MFP_CFG(GPIO90, AF1)
++#define GPIO15_SSP1_SCLK       MFP_CFG(GPIO15, AF6)
++#define GPIO16_SSP1_FRM                MFP_CFG(GPIO16, AF2)
++#define GPIO33_SSP1_SCLK       MFP_CFG(GPIO33, AF5)
++#define GPIO34_SSP1_FRM                MFP_CFG(GPIO34, AF5)
++#define GPIO85_SSP1_SCLK       MFP_CFG(GPIO85, AF1)
++#define GPIO86_SSP1_FRM                MFP_CFG(GPIO86, AF1)
++#define GPIO18_SSP1_TXD                MFP_CFG(GPIO18, AF7)
++#define GPIO18_SSP1_RXD                MFP_CFG(GPIO18, AF2)
++#define GPIO20_SSP1_TXD                MFP_CFG(GPIO20, AF2)
++#define GPIO20_SSP1_RXD                MFP_CFG(GPIO20, AF7)
++#define GPIO35_SSP1_TXD                MFP_CFG(GPIO35, AF5)
++#define GPIO35_SSP1_RXD                MFP_CFG(GPIO35, AF4)
++#define GPIO36_SSP1_TXD                MFP_CFG(GPIO36, AF5)
++#define GPIO36_SSP1_RXD                MFP_CFG(GPIO36, AF6)
++#define GPIO87_SSP1_TXD                MFP_CFG(GPIO87, AF1)
++#define GPIO87_SSP1_RXD                MFP_CFG(GPIO87, AF6)
++#define GPIO88_SSP1_TXD                MFP_CFG(GPIO88, AF6)
++#define GPIO88_SSP1_RXD                MFP_CFG(GPIO88, AF1)
++
++/* SSP2 */
++#define GPIO29_SSP2_EXTCLK     MFP_CFG(GPIO29, AF2)
++#define GPIO23_SSP2_SCLK       MFP_CFG(GPIO23, AF2)
++#define GPIO17_SSP2_FRM                MFP_CFG(GPIO17, AF2)
++#define GPIO25_SSP2_SCLK       MFP_CFG(GPIO25, AF2)
++#define GPIO26_SSP2_FRM                MFP_CFG(GPIO26, AF2)
++#define GPIO33_SSP2_SCLK       MFP_CFG(GPIO33, AF6)
++#define GPIO34_SSP2_FRM                MFP_CFG(GPIO34, AF6)
++#define GPIO64_SSP2_SCLK       MFP_CFG(GPIO64, AF2)
++#define GPIO65_SSP2_FRM                MFP_CFG(GPIO65, AF2)
++#define GPIO19_SSP2_TXD                MFP_CFG(GPIO19, AF2)
++#define GPIO19_SSP2_RXD                MFP_CFG(GPIO19, AF7)
++#define GPIO24_SSP2_TXD                MFP_CFG(GPIO24, AF5)
++#define GPIO24_SSP2_RXD                MFP_CFG(GPIO24, AF4)
++#define GPIO27_SSP2_TXD                MFP_CFG(GPIO27, AF2)
++#define GPIO27_SSP2_RXD                MFP_CFG(GPIO27, AF5)
++#define GPIO28_SSP2_TXD                MFP_CFG(GPIO28, AF5)
++#define GPIO28_SSP2_RXD                MFP_CFG(GPIO28, AF2)
++#define GPIO35_SSP2_TXD                MFP_CFG(GPIO35, AF7)
++#define GPIO35_SSP2_RXD                MFP_CFG(GPIO35, AF6)
++#define GPIO66_SSP2_TXD                MFP_CFG(GPIO66, AF4)
++#define GPIO66_SSP2_RXD                MFP_CFG(GPIO66, AF2)
++#define GPIO67_SSP2_TXD                MFP_CFG(GPIO67, AF2)
++#define GPIO67_SSP2_RXD                MFP_CFG(GPIO67, AF4)
++#define GPIO36_SSP2_TXD                MFP_CFG(GPIO36, AF7)
++
++/* SSP3 */
++#define GPIO69_SSP3_FRM                MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
++#define GPIO68_SSP3_SCLK       MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
++#define GPIO92_SSP3_FRM                MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
++#define GPIO91_SSP3_SCLK       MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
++#define GPIO70_SSP3_TXD                MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
++#define GPIO70_SSP3_RXD                MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
++#define GPIO71_SSP3_TXD                MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
++#define GPIO71_SSP3_RXD                MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
++#define GPIO93_SSP3_TXD                MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
++#define GPIO93_SSP3_RXD                MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
++#define GPIO94_SSP3_TXD                MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
++#define GPIO94_SSP3_RXD                MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
++
++/* SSP4 */
++#define GPIO95_SSP4_SCLK       MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
++#define GPIO96_SSP4_FRM                MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
++#define GPIO97_SSP4_TXD                MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
++#define GPIO97_SSP4_RXD                MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
++#define GPIO98_SSP4_TXD                MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
++#define GPIO98_SSP4_RXD                MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
++
++/* UART1 */
++#define GPIO32_UART1_CTS       MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
++#define GPIO37_UART1_CTS       MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
++#define GPIO79_UART1_CTS       MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
++#define GPIO84_UART1_CTS       MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
++#define GPIO101_UART1_CTS      MFP_CFG_LPM(GPIO101, AF1, FLOAT)
++#define GPIO106_UART1_CTS      MFP_CFG_LPM(GPIO106, AF6, FLOAT)
++
++#define GPIO32_UART1_RTS       MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
++#define GPIO37_UART1_RTS       MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
++#define GPIO79_UART1_RTS       MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
++#define GPIO84_UART1_RTS       MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
++#define GPIO101_UART1_RTS      MFP_CFG_LPM(GPIO101, AF6, FLOAT)
++#define GPIO106_UART1_RTS      MFP_CFG_LPM(GPIO106, AF1, FLOAT)
++
++#define GPIO34_UART1_DSR       MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
++#define GPIO36_UART1_DSR       MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
++#define GPIO81_UART1_DSR       MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
++#define GPIO83_UART1_DSR       MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
++#define GPIO103_UART1_DSR      MFP_CFG_LPM(GPIO103, AF1, FLOAT)
++#define GPIO105_UART1_DSR      MFP_CFG_LPM(GPIO105, AF6, FLOAT)
++
++#define GPIO34_UART1_DTR       MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
++#define GPIO36_UART1_DTR       MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
++#define GPIO81_UART1_DTR       MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
++#define GPIO83_UART1_DTR       MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
++#define GPIO103_UART1_DTR      MFP_CFG_LPM(GPIO103, AF6, FLOAT)
++#define GPIO105_UART1_DTR      MFP_CFG_LPM(GPIO105, AF1, FLOAT)
++
++#define GPIO35_UART1_RI                MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
++#define GPIO82_UART1_RI                MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
++#define GPIO104_UART1_RI       MFP_CFG_LPM(GPIO104, AF1, FLOAT)
++
++#define GPIO33_UART1_DCD       MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
++#define GPIO80_UART1_DCD       MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
++#define GPIO102_UART1_DCD      MFP_CFG_LPM(GPIO102, AF1, FLOAT)
++
++#define GPIO30_UART1_RXD       MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
++#define GPIO31_UART1_RXD       MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
++#define GPIO77_UART1_RXD       MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
++#define GPIO78_UART1_RXD       MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
++#define GPIO99_UART1_RXD       MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
++#define GPIO100_UART1_RXD      MFP_CFG_LPM(GPIO100, AF6, FLOAT)
++#define GPIO102_UART1_RXD      MFP_CFG_LPM(GPIO102, AF6, FLOAT)
++#define GPIO104_UART1_RXD      MFP_CFG_LPM(GPIO104, AF4, FLOAT)
++
++#define GPIO30_UART1_TXD       MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
++#define GPIO31_UART1_TXD       MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
++#define GPIO77_UART1_TXD       MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
++#define GPIO78_UART1_TXD       MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
++#define GPIO99_UART1_TXD       MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
++#define GPIO100_UART1_TXD      MFP_CFG_LPM(GPIO100, AF1, FLOAT)
++#define GPIO102_UART1_TXD      MFP_CFG_LPM(GPIO102, AF4, FLOAT)
++
++/* UART2 */
++#define GPIO15_UART2_CTS       MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
++#define GPIO16_UART2_CTS       MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
++#define GPIO111_UART2_CTS      MFP_CFG_LPM(GPIO111, AF3, FLOAT)
++#define GPIO114_UART2_CTS      MFP_CFG_LPM(GPIO114, AF1, FLOAT)
++
++#define GPIO15_UART2_RTS       MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
++#define GPIO16_UART2_RTS       MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
++#define GPIO114_UART2_RTS      MFP_CFG_LPM(GPIO114, AF3, FLOAT)
++#define GPIO111_UART2_RTS      MFP_CFG_LPM(GPIO111, AF1, FLOAT)
++
++#define GPIO18_UART2_RXD       MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
++#define GPIO19_UART2_RXD       MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
++#define GPIO112_UART2_RXD      MFP_CFG_LPM(GPIO112, AF1, FLOAT)
++#define GPIO113_UART2_RXD      MFP_CFG_LPM(GPIO113, AF3, FLOAT)
++
++#define GPIO18_UART2_TXD       MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
++#define GPIO19_UART2_TXD       MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
++#define GPIO112_UART2_TXD      MFP_CFG_LPM(GPIO112, AF3, FLOAT)
++#define GPIO113_UART2_TXD      MFP_CFG_LPM(GPIO113, AF1, FLOAT)
++
++/* UART3 */
++#define GPIO91_UART3_CTS       MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
++#define GPIO92_UART3_CTS       MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
++#define GPIO107_UART3_CTS      MFP_CFG_LPM(GPIO107, AF1, FLOAT)
++#define GPIO108_UART3_CTS      MFP_CFG_LPM(GPIO108, AF3, FLOAT)
++
++#define GPIO91_UART3_RTS       MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
++#define GPIO92_UART3_RTS       MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
++#define GPIO107_UART3_RTS      MFP_CFG_LPM(GPIO107, AF3, FLOAT)
++#define GPIO108_UART3_RTS      MFP_CFG_LPM(GPIO108, AF1, FLOAT)
++
++#define GPIO7_UART3_RXD                MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
++#define GPIO8_UART3_RXD                MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
++#define GPIO93_UART3_RXD       MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
++#define GPIO94_UART3_RXD       MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
++#define GPIO109_UART3_RXD      MFP_CFG_LPM(GPIO109, AF3, FLOAT)
++#define GPIO110_UART3_RXD      MFP_CFG_LPM(GPIO110, AF1, FLOAT)
++
++#define GPIO7_UART3_TXD                MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
++#define GPIO8_UART3_TXD                MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
++#define GPIO93_UART3_TXD       MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
++#define GPIO94_UART3_TXD       MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
++#define GPIO109_UART3_TXD      MFP_CFG_LPM(GPIO109, AF1, FLOAT)
++#define GPIO110_UART3_TXD      MFP_CFG_LPM(GPIO110, AF3, FLOAT)
++
++/* USB Host */
++#define GPIO0_2_USBH_PEN       MFP_CFG(GPIO0_2, AF1)
++#define GPIO1_2_USBH_PWR       MFP_CFG(GPIO1_2, AF1)
++
++/* USB P3 */
++#define GPIO77_USB_P3_1                MFP_CFG(GPIO77,  AF2)
++#define GPIO78_USB_P3_2                MFP_CFG(GPIO78,  AF2)
++#define GPIO79_USB_P3_3                MFP_CFG(GPIO79,  AF2)
++#define GPIO80_USB_P3_4                MFP_CFG(GPIO80,  AF2)
++#define GPIO81_USB_P3_5                MFP_CFG(GPIO81,  AF2)
++#define GPIO82_USB_P3_6                MFP_CFG(GPIO82,  AF2)
++
++/* PWM */
++#define GPIO17_PWM0_OUT                MFP_CFG(GPIO17, AF1)
++#define GPIO18_PWM1_OUT                MFP_CFG(GPIO18, AF1)
++#define GPIO19_PWM2_OUT                MFP_CFG(GPIO19, AF1)
++#define GPIO20_PWM3_OUT                MFP_CFG(GPIO20, AF1)
++
++/* CIR */
++#define GPIO8_CIR_OUT          MFP_CFG(GPIO8, AF5)
++#define GPIO16_CIR_OUT         MFP_CFG(GPIO16, AF3)
++
++#define GPIO20_OW_DQ_IN                MFP_CFG(GPIO20, AF5)
++#define GPIO126_OW_DQ          MFP_CFG(GPIO126, AF2)
++
++#define GPIO0_DF_RDY           MFP_CFG(GPIO0, AF1)
++#define GPIO7_CLK_BYPASS_XSC   MFP_CFG(GPIO7, AF7)
++#define GPIO17_EXT_SYNC_MVT_0  MFP_CFG(GPIO17, AF6)
++#define GPIO18_EXT_SYNC_MVT_1  MFP_CFG(GPIO18, AF6)
++#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6)
++#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6)
++#define GPIO49_48M_CLK         MFP_CFG(GPIO49, AF2)
++#define GPIO126_EXT_CLK                MFP_CFG(GPIO126, AF3)
++#define GPIO127_CLK_BYPASS_GB  MFP_CFG(GPIO127, AF7)
++#define GPIO71_EXT_MATCH_MVT   MFP_CFG(GPIO71, AF6)
++
++#define GPIO3_uIO_IN           MFP_CFG(GPIO3, AF1)
++
++#define GPIO4_uSIM_CARD_STATE  MFP_CFG(GPIO4, AF1)
++#define GPIO5_uSIM_uCLK                MFP_CFG(GPIO5, AF1)
++#define GPIO6_uSIM_uRST                MFP_CFG(GPIO6, AF1)
++#define GPIO16_uSIM_UVS_0      MFP_CFG(GPIO16, AF1)
++
++#define GPIO9_SCIO             MFP_CFG(GPIO9, AF1)
++#define GPIO20_RTC_MVT         MFP_CFG(GPIO20, AF4)
++#define GPIO126_RTC_MVT                MFP_CFG(GPIO126, AF1)
++
++/*
++ * PXA300 specific MFP configurations
++ */
++#ifdef CONFIG_CPU_PXA300
++#define GPIO99_USB_P2_2                MFP_CFG(GPIO99, AF2)
++#define GPIO99_USB_P2_5                MFP_CFG(GPIO99, AF3)
++#define GPIO99_USB_P2_6                MFP_CFG(GPIO99, AF4)
++#define GPIO100_USB_P2_2       MFP_CFG(GPIO100, AF4)
++#define GPIO100_USB_P2_5       MFP_CFG(GPIO100, AF5)
++#define GPIO101_USB_P2_1       MFP_CFG(GPIO101, AF2)
++#define GPIO102_USB_P2_4       MFP_CFG(GPIO102, AF2)
++#define GPIO104_USB_P2_3       MFP_CFG(GPIO104, AF2)
++#define GPIO105_USB_P2_5       MFP_CFG(GPIO105, AF2)
++#define GPIO100_USB_P2_6       MFP_CFG(GPIO100, AF2)
++#define GPIO106_USB_P2_7       MFP_CFG(GPIO106, AF2)
++#define GPIO103_USB_P2_8       MFP_CFG(GPIO103, AF2)
++
++/* U2D UTMI */
++#define GPIO38_UTM_CLK         MFP_CFG(GPIO38,  AF1)
++#define GPIO26_U2D_RXERROR     MFP_CFG(GPIO26,  AF3)
++#define GPIO50_U2D_RXERROR     MFP_CFG(GPIO50,  AF1)
++#define GPIO89_U2D_RXERROR     MFP_CFG(GPIO89,  AF5)
++#define GPIO24_UTM_RXVALID     MFP_CFG(GPIO24,  AF3)
++#define GPIO48_UTM_RXVALID     MFP_CFG(GPIO48,  AF2)
++#define GPIO87_UTM_RXVALID     MFP_CFG(GPIO87,  AF5)
++#define GPIO25_UTM_RXACTIVE    MFP_CFG(GPIO25,  AF3)
++#define GPIO47_UTM_RXACTIVE    MFP_CFG(GPIO47,  AF2)
++#define GPIO49_UTM_RXACTIVE    MFP_CFG(GPIO49,  AF1)
++#define GPIO88_UTM_RXACTIVE    MFP_CFG(GPIO88,  AF5)
++#define GPIO53_UTM_TXREADY     MFP_CFG(GPIO53,  AF1)
++#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67,  AF3)
++#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92,  AF3)
++#define GPIO104_UTM_LINESTATE_0        MFP_CFG(GPIO104, AF3)
++#define GPIO109_UTM_LINESTATE_0        MFP_CFG(GPIO109, AF4)
++#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68,  AF3)
++#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93,  AF3)
++#define GPIO105_UTM_LINESTATE_1        MFP_CFG(GPIO105, AF3)
++#define GPIO27_U2D_OPMODE_0    MFP_CFG(GPIO27,  AF4)
++#define GPIO51_U2D_OPMODE_0    MFP_CFG(GPIO51,  AF2)
++#define GPIO90_U2D_OPMODE_0    MFP_CFG(GPIO90,  AF7)
++#define GPIO28_U2D_OPMODE_1    MFP_CFG(GPIO28,  AF4)
++#define GPIO52_U2D_OPMODE_1    MFP_CFG(GPIO52,  AF2)
++#define GPIO106_U2D_OPMODE_1   MFP_CFG(GPIO106, AF3)
++#define GPIO110_U2D_OPMODE_1   MFP_CFG(GPIO110, AF5)
++#define GPIO76_U2D_RESET       MFP_CFG(GPIO76,  AF1)
++#define GPIO95_U2D_RESET       MFP_CFG(GPIO95,  AF2)
++#define GPIO100_U2D_RESET      MFP_CFG(GPIO100, AF3)
++#define GPIO66_U2D_SUSPEND     MFP_CFG(GPIO66,  AF3)
++#define GPIO98_U2D_SUSPEND     MFP_CFG(GPIO98,  AF2)
++#define GPIO103_U2D_SUSPEND    MFP_CFG(GPIO103, AF3)
++#define GPIO65_U2D_TERM_SEL    MFP_CFG(GPIO65,  AF5)
++#define GPIO97_U2D_TERM_SEL    MFP_CFG(GPIO97,  AF3)
++#define GPIO102_U2D_TERM_SEL   MFP_CFG(GPIO102, AF5)
++#define GPIO29_U2D_TXVALID     MFP_CFG(GPIO29,  AF3)
++#define GPIO52_U2D_TXVALID     MFP_CFG(GPIO52,  AF4)
++#define GPIO69_U2D_TXVALID     MFP_CFG(GPIO69,  AF3)
++#define GPIO85_U2D_TXVALID     MFP_CFG(GPIO85,  AF7)
++#define GPIO64_U2D_XCVR_SEL    MFP_CFG(GPIO64,  AF5)
++#define GPIO96_U2D_XCVR_SEL    MFP_CFG(GPIO96,  AF3)
++#define GPIO101_U2D_XCVR_SEL   MFP_CFG(GPIO101, AF5)
++#define GPIO30_UTM_PHYDATA_0   MFP_CFG(GPIO30,  AF3)
++#define GPIO31_UTM_PHYDATA_1   MFP_CFG(GPIO31,  AF3)
++#define GPIO32_UTM_PHYDATA_2   MFP_CFG(GPIO32,  AF3)
++#define GPIO33_UTM_PHYDATA_3   MFP_CFG(GPIO33,  AF3)
++#define GPIO34_UTM_PHYDATA_4   MFP_CFG(GPIO34,  AF3)
++#define GPIO35_UTM_PHYDATA_5   MFP_CFG(GPIO35,  AF3)
++#define GPIO36_UTM_PHYDATA_6   MFP_CFG(GPIO36,  AF3)
++#define GPIO37_UTM_PHYDATA_7   MFP_CFG(GPIO37,  AF3)
++#define GPIO39_UTM_PHYDATA_0   MFP_CFG(GPIO39,  AF3)
++#define GPIO40_UTM_PHYDATA_1   MFP_CFG(GPIO40,  AF3)
++#define GPIO41_UTM_PHYDATA_2   MFP_CFG(GPIO41,  AF3)
++#define GPIO42_UTM_PHYDATA_3   MFP_CFG(GPIO42,  AF3)
++#define GPIO43_UTM_PHYDATA_4   MFP_CFG(GPIO43,  AF3)
++#define GPIO44_UTM_PHYDATA_5   MFP_CFG(GPIO44,  AF3)
++#define GPIO45_UTM_PHYDATA_6   MFP_CFG(GPIO45,  AF3)
++#define GPIO46_UTM_PHYDATA_7   MFP_CFG(GPIO46,  AF3)
++#endif /* CONFIG_CPU_PXA300 */
++
++/*
++ * PXA310 specific MFP configurations
++ */
++#ifdef CONFIG_CPU_PXA310
++/* USB P2 */
++#define GPIO36_USB_P2_1                MFP_CFG(GPIO36, AF1)
++#define GPIO30_USB_P2_2                MFP_CFG(GPIO30, AF1)
++#define GPIO35_USB_P2_3                MFP_CFG(GPIO35, AF1)
++#define GPIO32_USB_P2_4                MFP_CFG(GPIO32, AF1)
++#define GPIO34_USB_P2_5                MFP_CFG(GPIO34, AF1)
++#define GPIO31_USB_P2_6                MFP_CFG(GPIO31, AF1)
++
++/* MMC1 */
++#define GPIO24_MMC1_CMD                MFP_CFG(GPIO24, AF3)
++#define GPIO29_MMC1_DAT0       MFP_CFG(GPIO29, AF3)
++
++/* MMC3 */
++#define GPIO103_MMC3_CLK       MFP_CFG(GPIO103, AF2)
++#define GPIO105_MMC3_CMD       MFP_CFG(GPIO105, AF2)
++#define GPIO11_2_MMC3_CLK      MFP_CFG(GPIO11_2, AF1)
++#define GPIO12_2_MMC3_CMD      MFP_CFG(GPIO12_2, AF1)
++#define GPIO7_2_MMC3_DAT0      MFP_CFG(GPIO7_2, AF1)
++#define GPIO8_2_MMC3_DAT1      MFP_CFG(GPIO8_2, AF1)
++#define GPIO9_2_MMC3_DAT2      MFP_CFG(GPIO9_2, AF1)
++#define GPIO10_2_MMC3_DAT3     MFP_CFG(GPIO10_2, AF1)
++
++/* ULPI */
++#define GPIO38_ULPI_CLK                MFP_CFG(GPIO38, AF1)
++#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3)
++#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3)
++#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3)
++#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3)
++#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3)
++#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3)
++#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3)
++#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3)
++#define GPIO33_ULPI_OTG_INTR   MFP_CFG(GPIO33, AF1)
++
++#define ULPI_DIR       MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
++#define ULPI_NXT       MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
++#define ULPI_STP       MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
++#endif /* CONFIG_CPU_PXA310 */
++
++#endif /* __ASM_ARCH_MFP_PXA300_H */
+Index: linux-2.6.22/include/asm-arm/arch-pxa/mfp-pxa320.h
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/include/asm-arm/arch-pxa/mfp-pxa320.h  2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,446 @@
++/*
++ * linux/include/asm-arm/arch-pxa/mfp-pxa320.h
++ *
++ * PXA320 specific MFP configuration definitions
++ *
++ * Copyright (C) 2007 Marvell International Ltd.
++ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
++ *             initial version
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ */
++
++#ifndef __ASM_ARCH_MFP_PXA320_H
++#define __ASM_ARCH_MFP_PXA320_H
++
++#include <asm/arch/mfp.h>
++
++/* GPIO */
++#define GPIO46_GPIO            MFP_CFG(GPIO6, AF0)
++#define GPIO49_GPIO            MFP_CFG(GPIO49, AF0)
++#define GPIO50_GPIO            MFP_CFG(GPIO50, AF0)
++#define GPIO51_GPIO            MFP_CFG(GPIO51, AF0)
++#define GPIO52_GPIO            MFP_CFG(GPIO52, AF0)
++
++#define GPIO7_2_GPIO           MFP_CFG(GPIO7_2, AF0)
++#define GPIO8_2_GPIO           MFP_CFG(GPIO8_2, AF0)
++#define GPIO9_2_GPIO           MFP_CFG(GPIO9_2, AF0)
++#define GPIO10_2_GPIO          MFP_CFG(GPIO10_2, AF0)
++#define GPIO11_2_GPIO          MFP_CFG(GPIO11_2, AF0)
++#define GPIO12_2_GPIO          MFP_CFG(GPIO12_2, AF0)
++#define GPIO13_2_GPIO          MFP_CFG(GPIO13_2, AF0)
++#define GPIO14_2_GPIO          MFP_CFG(GPIO14_2, AF0)
++#define GPIO15_2_GPIO          MFP_CFG(GPIO15_2, AF0)
++#define GPIO16_2_GPIO          MFP_CFG(GPIO16_2, AF0)
++#define GPIO17_2_GPIO          MFP_CFG(GPIO17_2, AF0)
++
++/* Chip Select */
++#define GPIO4_nCS3             MFP_CFG(GPIO4, AF1)
++
++/* AC97 */
++#define GPIO34_AC97_SYSCLK     MFP_CFG(GPIO34, AF1)
++#define GPIO39_AC97_BITCLK     MFP_CFG(GPIO39, AF1)
++#define GPIO40_AC97_nACRESET   MFP_CFG(GPIO40, AF1)
++#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1)
++#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1)
++#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2)
++#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2)
++#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3)
++#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3)
++#define GPIO37_AC97_SDATA_OUT  MFP_CFG(GPIO37, AF1)
++#define GPIO38_AC97_SYNC       MFP_CFG(GPIO38, AF1)
++
++/* I2C */
++#define GPIO32_I2C_SCL         MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
++#define GPIO33_I2C_SDA         MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
++
++/* QCI */
++#define GPIO49_CI_DD_0         MFP_CFG_DRV(GPIO49, AF1, DS04X)
++#define GPIO50_CI_DD_1         MFP_CFG_DRV(GPIO50, AF1, DS04X)
++#define GPIO51_CI_DD_2         MFP_CFG_DRV(GPIO51, AF1, DS04X)
++#define GPIO52_CI_DD_3         MFP_CFG_DRV(GPIO52, AF1, DS04X)
++#define GPIO53_CI_DD_4         MFP_CFG_DRV(GPIO53, AF1, DS04X)
++#define GPIO54_CI_DD_5         MFP_CFG_DRV(GPIO54, AF1, DS04X)
++#define GPIO55_CI_DD_6         MFP_CFG_DRV(GPIO55, AF1, DS04X)
++#define GPIO56_CI_DD_7         MFP_CFG_DRV(GPIO56, AF0, DS04X)
++#define GPIO57_CI_DD_8         MFP_CFG_DRV(GPIO57, AF1, DS04X)
++#define GPIO58_CI_DD_9         MFP_CFG_DRV(GPIO58, AF1, DS04X)
++#define GPIO59_CI_MCLK         MFP_CFG_DRV(GPIO59, AF0, DS04X)
++#define GPIO60_CI_PCLK         MFP_CFG_DRV(GPIO60, AF0, DS04X)
++#define GPIO61_CI_HSYNC                MFP_CFG_DRV(GPIO61, AF0, DS04X)
++#define GPIO62_CI_VSYNC                MFP_CFG_DRV(GPIO62, AF0, DS04X)
++
++#define GPIO31_CIR_OUT         MFP_CFG(GPIO31, AF5)
++
++#define GPIO0_2_CLK_EXT                MFP_CFG(GPIO0_2, AF3)
++#define GPIO0_DRQ              MFP_CFG(GPIO0, AF2)
++#define GPIO11_EXT_SYNC0       MFP_CFG(GPIO11, AF5)
++#define GPIO12_EXT_SYNC1       MFP_CFG(GPIO12, AF6)
++#define GPIO0_2_HZ_CLK         MFP_CFG(GPIO0_2, AF1)
++#define GPIO14_HZ_CLK          MFP_CFG(GPIO14, AF4)
++#define GPIO30_ICP_RXD         MFP_CFG(GPIO30, AF1)
++#define GPIO31_ICP_TXD         MFP_CFG(GPIO31, AF1)
++
++#define GPIO83_KP_DKIN_0       MFP_CFG_LPM(GPIO83, AF3, FLOAT)
++#define GPIO84_KP_DKIN_1       MFP_CFG_LPM(GPIO84, AF3, FLOAT)
++#define GPIO85_KP_DKIN_2       MFP_CFG_LPM(GPIO85, AF3, FLOAT)
++#define GPIO86_KP_DKIN_3       MFP_CFG_LPM(GPIO86, AF3, FLOAT)
++
++#define GPIO105_KP_DKIN_0      MFP_CFG_LPM(GPIO105, AF2, FLOAT)
++#define GPIO106_KP_DKIN_1      MFP_CFG_LPM(GPIO106, AF2, FLOAT)
++#define GPIO107_KP_DKIN_2      MFP_CFG_LPM(GPIO107, AF2, FLOAT)
++#define GPIO108_KP_DKIN_3      MFP_CFG_LPM(GPIO108, AF2, FLOAT)
++#define GPIO109_KP_DKIN_4      MFP_CFG_LPM(GPIO109, AF2, FLOAT)
++#define GPIO110_KP_DKIN_5      MFP_CFG_LPM(GPIO110, AF2, FLOAT)
++#define GPIO111_KP_DKIN_6      MFP_CFG_LPM(GPIO111, AF2, FLOAT)
++#define GPIO112_KP_DKIN_7      MFP_CFG_LPM(GPIO112, AF2, FLOAT)
++
++#define GPIO113_KP_DKIN_0      MFP_CFG_LPM(GPIO113, AF2, FLOAT)
++#define GPIO114_KP_DKIN_1      MFP_CFG_LPM(GPIO114, AF2, FLOAT)
++#define GPIO115_KP_DKIN_2      MFP_CFG_LPM(GPIO115, AF2, FLOAT)
++#define GPIO116_KP_DKIN_3      MFP_CFG_LPM(GPIO116, AF2, FLOAT)
++#define GPIO117_KP_DKIN_4      MFP_CFG_LPM(GPIO117, AF2, FLOAT)
++#define GPIO118_KP_DKIN_5      MFP_CFG_LPM(GPIO118, AF2, FLOAT)
++#define GPIO119_KP_DKIN_6      MFP_CFG_LPM(GPIO119, AF2, FLOAT)
++#define GPIO120_KP_DKIN_7      MFP_CFG_LPM(GPIO120, AF2, FLOAT)
++
++#define GPIO127_KP_DKIN_0      MFP_CFG_LPM(GPIO127, AF2, FLOAT)
++#define GPIO126_KP_DKIN_1      MFP_CFG_LPM(GPIO126, AF2, FLOAT)
++
++#define GPIO2_2_KP_DKIN_0      MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
++#define GPIO3_2_KP_DKIN_1      MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
++#define GPIO125_KP_DKIN_2      MFP_CFG_LPM(GPIO125, AF2, FLOAT)
++#define GPIO124_KP_DKIN_3      MFP_CFG_LPM(GPIO124, AF2, FLOAT)
++#define GPIO123_KP_DKIN_4      MFP_CFG_LPM(GPIO123, AF2, FLOAT)
++#define GPIO122_KP_DKIN_5      MFP_CFG_LPM(GPIO122, AF2, FLOAT)
++#define GPIO121_KP_DKIN_6      MFP_CFG_LPM(GPIO121, AF2, FLOAT)
++#define GPIO4_2_KP_DKIN_7      MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
++
++#define GPIO113_KP_MKIN_0      MFP_CFG_LPM(GPIO113, AF1, FLOAT)
++#define GPIO114_KP_MKIN_1      MFP_CFG_LPM(GPIO114, AF1, FLOAT)
++#define GPIO115_KP_MKIN_2      MFP_CFG_LPM(GPIO115, AF1, FLOAT)
++#define GPIO116_KP_MKIN_3      MFP_CFG_LPM(GPIO116, AF1, FLOAT)
++#define GPIO117_KP_MKIN_4      MFP_CFG_LPM(GPIO117, AF1, FLOAT)
++#define GPIO118_KP_MKIN_5      MFP_CFG_LPM(GPIO118, AF1, FLOAT)
++#define GPIO119_KP_MKIN_6      MFP_CFG_LPM(GPIO119, AF1, FLOAT)
++#define GPIO120_KP_MKIN_7      MFP_CFG_LPM(GPIO120, AF1, FLOAT)
++
++#define GPIO83_KP_MKOUT_0      MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
++#define GPIO84_KP_MKOUT_1      MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
++#define GPIO85_KP_MKOUT_2      MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
++#define GPIO86_KP_MKOUT_3      MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
++#define GPIO13_KP_MKOUT_4      MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
++#define GPIO14_KP_MKOUT_5      MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
++
++#define GPIO121_KP_MKOUT_0     MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
++#define GPIO122_KP_MKOUT_1     MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
++#define GPIO123_KP_MKOUT_2     MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
++#define GPIO124_KP_MKOUT_3     MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
++#define GPIO125_KP_MKOUT_4     MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
++#define GPIO126_KP_MKOUT_5     MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
++#define GPIO127_KP_MKOUT_6     MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
++#define GPIO5_2_KP_MKOUT_7     MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
++
++/* LCD */
++#define GPIO6_2_LCD_LDD_0      MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
++#define GPIO7_2_LCD_LDD_1      MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
++#define GPIO8_2_LCD_LDD_2      MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
++#define GPIO9_2_LCD_LDD_3      MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
++#define GPIO10_2_LCD_LDD_4     MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
++#define GPIO11_2_LCD_LDD_5     MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
++#define GPIO12_2_LCD_LDD_6     MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
++#define GPIO13_2_LCD_LDD_7     MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
++#define GPIO63_LCD_LDD_8       MFP_CFG_DRV(GPIO63, AF1, DS01X)
++#define GPIO64_LCD_LDD_9       MFP_CFG_DRV(GPIO64, AF1, DS01X)
++#define GPIO65_LCD_LDD_10      MFP_CFG_DRV(GPIO65, AF1, DS01X)
++#define GPIO66_LCD_LDD_11      MFP_CFG_DRV(GPIO66, AF1, DS01X)
++#define GPIO67_LCD_LDD_12      MFP_CFG_DRV(GPIO67, AF1, DS01X)
++#define GPIO68_LCD_LDD_13      MFP_CFG_DRV(GPIO68, AF1, DS01X)
++#define GPIO69_LCD_LDD_14      MFP_CFG_DRV(GPIO69, AF1, DS01X)
++#define GPIO70_LCD_LDD_15      MFP_CFG_DRV(GPIO70, AF1, DS01X)
++#define GPIO71_LCD_LDD_16      MFP_CFG_DRV(GPIO71, AF1, DS01X)
++#define GPIO72_LCD_LDD_17      MFP_CFG_DRV(GPIO72, AF1, DS01X)
++#define GPIO73_LCD_CS_N                MFP_CFG_DRV(GPIO73, AF2, DS01X)
++#define GPIO74_LCD_VSYNC       MFP_CFG_DRV(GPIO74, AF2, DS01X)
++#define GPIO14_2_LCD_FCLK      MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
++#define GPIO15_2_LCD_LCLK      MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
++#define GPIO16_2_LCD_PCLK      MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
++#define GPIO17_2_LCD_BIAS      MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
++#define GPIO64_LCD_VSYNC       MFP_CFG_DRV(GPIO64, AF2, DS01X)
++#define GPIO63_LCD_CS_N                MFP_CFG_DRV(GPIO63, AF2, DS01X)
++
++#define GPIO6_2_MLCD_DD_0      MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
++#define GPIO7_2_MLCD_DD_1      MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
++#define GPIO8_2_MLCD_DD_2      MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
++#define GPIO9_2_MLCD_DD_3      MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
++#define GPIO10_2_MLCD_DD_4     MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
++#define GPIO11_2_MLCD_DD_5     MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
++#define GPIO12_2_MLCD_DD_6     MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
++#define GPIO13_2_MLCD_DD_7     MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
++#define GPIO63_MLCD_DD_8       MFP_CFG_DRV(GPIO63, AF7, DS08X)
++#define GPIO64_MLCD_DD_9       MFP_CFG_DRV(GPIO64, AF7, DS08X)
++#define GPIO65_MLCD_DD_10      MFP_CFG_DRV(GPIO65, AF7, DS08X)
++#define GPIO66_MLCD_DD_11      MFP_CFG_DRV(GPIO66, AF7, DS08X)
++#define GPIO67_MLCD_DD_12      MFP_CFG_DRV(GPIO67, AF7, DS08X)
++#define GPIO68_MLCD_DD_13      MFP_CFG_DRV(GPIO68, AF7, DS08X)
++#define GPIO69_MLCD_DD_14      MFP_CFG_DRV(GPIO69, AF7, DS08X)
++#define GPIO70_MLCD_DD_15      MFP_CFG_DRV(GPIO70, AF7, DS08X)
++#define GPIO71_MLCD_DD_16      MFP_CFG_DRV(GPIO71, AF7, DS08X)
++#define GPIO72_MLCD_DD_17      MFP_CFG_DRV(GPIO72, AF7, DS08X)
++#define GPIO73_MLCD_CS         MFP_CFG_DRV(GPIO73, AF7, DS08X)
++#define GPIO74_MLCD_VSYNC      MFP_CFG_DRV(GPIO74, AF7, DS08X)
++#define GPIO14_2_MLCD_FCLK     MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
++#define GPIO15_2_MLCD_LCLK     MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
++#define GPIO16_2_MLCD_PCLK     MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
++#define GPIO17_2_MLCD_BIAS     MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
++
++/* MMC1 */
++#define GPIO9_MMC1_CMD         MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
++#define GPIO22_MMC1_CLK                MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
++#define GPIO23_MMC1_CMD                MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
++#define GPIO30_MMC1_CLK                MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
++#define GPIO31_MMC1_CMD                MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
++#define GPIO5_MMC1_DAT0                MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
++#define GPIO6_MMC1_DAT1                MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
++#define GPIO7_MMC1_DAT2                MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
++#define GPIO8_MMC1_DAT3                MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
++#define GPIO18_MMC1_DAT0       MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
++#define GPIO19_MMC1_DAT1       MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
++#define GPIO20_MMC1_DAT2       MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
++#define GPIO21_MMC1_DAT3       MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
++
++#define GPIO28_MMC2_CLK                MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
++#define GPIO29_MMC2_CMD                MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
++#define GPIO30_MMC2_CLK                MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
++#define GPIO31_MMC2_CMD                MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
++#define GPIO79_MMC2_CLK                MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
++#define GPIO80_MMC2_CMD                MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
++
++#define GPIO5_MMC2_DAT0                MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
++#define GPIO6_MMC2_DAT1                MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
++#define GPIO7_MMC2_DAT2                MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
++#define GPIO8_MMC2_DAT3                MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
++#define GPIO24_MMC2_DAT0       MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
++#define GPIO75_MMC2_DAT0       MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
++#define GPIO25_MMC2_DAT1       MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
++#define GPIO76_MMC2_DAT1       MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
++#define GPIO26_MMC2_DAT2       MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
++#define GPIO77_MMC2_DAT2       MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
++#define GPIO27_MMC2_DAT3       MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
++#define GPIO78_MMC2_DAT3       MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
++
++/* 1-Wire */
++#define GPIO14_ONE_WIRE                MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
++#define GPIO0_2_ONE_WIRE       MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
++
++/* SSP1 */
++#define GPIO87_SSP1_EXTCLK     MFP_CFG(GPIO87, AF1)
++#define GPIO88_SSP1_SYSCLK     MFP_CFG(GPIO88, AF1)
++#define GPIO83_SSP1_SCLK       MFP_CFG(GPIO83, AF1)
++#define GPIO84_SSP1_SFRM       MFP_CFG(GPIO84, AF1)
++#define GPIO85_SSP1_RXD                MFP_CFG(GPIO85, AF6)
++#define GPIO85_SSP1_TXD                MFP_CFG(GPIO85, AF1)
++#define GPIO86_SSP1_RXD                MFP_CFG(GPIO86, AF1)
++#define GPIO86_SSP1_TXD                MFP_CFG(GPIO86, AF6)
++
++/* SSP2 */
++#define GPIO39_SSP2_EXTCLK     MFP_CFG(GPIO39, AF2)
++#define GPIO40_SSP2_SYSCLK     MFP_CFG(GPIO40, AF2)
++#define GPIO12_SSP2_SCLK       MFP_CFG(GPIO12, AF2)
++#define GPIO35_SSP2_SCLK       MFP_CFG(GPIO35, AF2)
++#define GPIO36_SSP2_SFRM       MFP_CFG(GPIO36, AF2)
++#define GPIO37_SSP2_RXD                MFP_CFG(GPIO37, AF5)
++#define GPIO37_SSP2_TXD                MFP_CFG(GPIO37, AF2)
++#define GPIO38_SSP2_RXD                MFP_CFG(GPIO38, AF2)
++#define GPIO38_SSP2_TXD                MFP_CFG(GPIO38, AF5)
++
++#define GPIO69_SSP3_SCLK       MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
++#define GPIO70_SSP3_FRM                MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
++#define GPIO89_SSP3_SCLK       MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
++#define GPIO90_SSP3_FRM                MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
++#define GPIO71_SSP3_RXD                MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
++#define GPIO71_SSP3_TXD                MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
++#define GPIO72_SSP3_RXD                MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
++#define GPIO72_SSP3_TXD                MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
++#define GPIO91_SSP3_RXD                MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
++#define GPIO91_SSP3_TXD                MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
++#define GPIO92_SSP3_RXD                MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
++#define GPIO92_SSP3_TXD                MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
++
++#define GPIO93_SSP4_SCLK       MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
++#define GPIO94_SSP4_FRM                MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
++#define GPIO94_SSP4_RXD                MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
++#define GPIO95_SSP4_RXD                MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
++#define GPIO95_SSP4_TXD                MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
++#define GPIO96_SSP4_RXD                MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
++#define GPIO96_SSP4_TXD                MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
++
++/* UART1 */
++#define GPIO41_UART1_RXD       MFP_CFG_LPM(GPIO41, AF2, FLOAT)
++#define GPIO41_UART1_TXD       MFP_CFG_LPM(GPIO41, AF4, FLOAT)
++#define GPIO42_UART1_RXD       MFP_CFG_LPM(GPIO42, AF4, FLOAT)
++#define GPIO42_UART1_TXD       MFP_CFG_LPM(GPIO42, AF2, FLOAT)
++#define GPIO97_UART1_RXD       MFP_CFG_LPM(GPIO97, AF1, FLOAT)
++#define GPIO97_UART1_TXD       MFP_CFG_LPM(GPIO97, AF6, FLOAT)
++#define GPIO98_UART1_RXD       MFP_CFG_LPM(GPIO98, AF6, FLOAT)
++#define GPIO98_UART1_TXD       MFP_CFG_LPM(GPIO98, AF1, FLOAT)
++#define GPIO43_UART1_CTS       MFP_CFG_LPM(GPIO43, AF2, FLOAT)
++#define GPIO43_UART1_RTS       MFP_CFG_LPM(GPIO43, AF4, FLOAT)
++#define GPIO48_UART1_CTS       MFP_CFG_LPM(GPIO48, AF4, FLOAT)
++#define GPIO48_UART1_RTS       MFP_CFG_LPM(GPIO48, AF2, FLOAT)
++#define GPIO99_UART1_CTS       MFP_CFG_LPM(GPIO99, AF1, FLOAT)
++#define GPIO99_UART1_RTS       MFP_CFG_LPM(GPIO99, AF6, FLOAT)
++#define GPIO104_UART1_CTS      MFP_CFG_LPM(GPIO104, AF6, FLOAT)
++#define GPIO104_UART1_RTS      MFP_CFG_LPM(GPIO104, AF1, FLOAT)
++#define GPIO45_UART1_DTR       MFP_CFG_LPM(GPIO45, AF4, FLOAT)
++#define GPIO45_UART1_DSR       MFP_CFG_LPM(GPIO45, AF2, FLOAT)
++#define GPIO47_UART1_DTR       MFP_CFG_LPM(GPIO47, AF2, FLOAT)
++#define GPIO47_UART1_DSR       MFP_CFG_LPM(GPIO47, AF4, FLOAT)
++#define GPIO101_UART1_DTR      MFP_CFG_LPM(GPIO101, AF6, FLOAT)
++#define GPIO101_UART1_DSR      MFP_CFG_LPM(GPIO101, AF1, FLOAT)
++#define GPIO103_UART1_DTR      MFP_CFG_LPM(GPIO103, AF1, FLOAT)
++#define GPIO103_UART1_DSR      MFP_CFG_LPM(GPIO103, AF6, FLOAT)
++#define GPIO44_UART1_DCD       MFP_CFG_LPM(GPIO44, AF2, FLOAT)
++#define GPIO100_UART1_DCD      MFP_CFG_LPM(GPIO100, AF1, FLOAT)
++#define GPIO46_UART1_RI                MFP_CFG_LPM(GPIO46, AF2, FLOAT)
++#define GPIO102_UART1_RI       MFP_CFG_LPM(GPIO102, AF1, FLOAT)
++
++/* UART2 */
++#define GPIO109_UART2_CTS      MFP_CFG_LPM(GPIO109, AF3, FLOAT)
++#define GPIO109_UART2_RTS      MFP_CFG_LPM(GPIO109, AF1, FLOAT)
++#define GPIO112_UART2_CTS      MFP_CFG_LPM(GPIO112, AF1, FLOAT)
++#define GPIO112_UART2_RTS      MFP_CFG_LPM(GPIO112, AF3, FLOAT)
++#define GPIO110_UART2_RXD      MFP_CFG_LPM(GPIO110, AF1, FLOAT)
++#define GPIO110_UART2_TXD      MFP_CFG_LPM(GPIO110, AF3, FLOAT)
++#define GPIO111_UART2_RXD      MFP_CFG_LPM(GPIO111, AF3, FLOAT)
++#define GPIO111_UART2_TXD      MFP_CFG_LPM(GPIO111, AF1, FLOAT)
++
++/* UART3 */
++#define GPIO89_UART3_CTS       MFP_CFG_LPM(GPIO89, AF2, FLOAT)
++#define GPIO89_UART3_RTS       MFP_CFG_LPM(GPIO89, AF4, FLOAT)
++#define GPIO90_UART3_CTS       MFP_CFG_LPM(GPIO90, AF4, FLOAT)
++#define GPIO90_UART3_RTS       MFP_CFG_LPM(GPIO90, AF2, FLOAT)
++#define GPIO105_UART3_CTS      MFP_CFG_LPM(GPIO105, AF1, FLOAT)
++#define GPIO105_UART3_RTS      MFP_CFG_LPM(GPIO105, AF3, FLOAT)
++#define GPIO106_UART3_CTS      MFP_CFG_LPM(GPIO106, AF3, FLOAT)
++#define GPIO106_UART3_RTS      MFP_CFG_LPM(GPIO106, AF1, FLOAT)
++#define GPIO30_UART3_RXD       MFP_CFG_LPM(GPIO30, AF2, FLOAT)
++#define GPIO30_UART3_TXD       MFP_CFG_LPM(GPIO30, AF6, FLOAT)
++#define GPIO31_UART3_RXD       MFP_CFG_LPM(GPIO31, AF6, FLOAT)
++#define GPIO31_UART3_TXD       MFP_CFG_LPM(GPIO31, AF2, FLOAT)
++#define GPIO91_UART3_RXD       MFP_CFG_LPM(GPIO91, AF4, FLOAT)
++#define GPIO91_UART3_TXD       MFP_CFG_LPM(GPIO91, AF2, FLOAT)
++#define GPIO92_UART3_RXD       MFP_CFG_LPM(GPIO92, AF2, FLOAT)
++#define GPIO92_UART3_TXD       MFP_CFG_LPM(GPIO92, AF4, FLOAT)
++#define GPIO107_UART3_RXD      MFP_CFG_LPM(GPIO107, AF3, FLOAT)
++#define GPIO107_UART3_TXD      MFP_CFG_LPM(GPIO107, AF1, FLOAT)
++#define GPIO108_UART3_RXD      MFP_CFG_LPM(GPIO108, AF1, FLOAT)
++#define GPIO108_UART3_TXD      MFP_CFG_LPM(GPIO108, AF3, FLOAT)
++
++
++/* USB 2.0 UTMI */
++#define GPIO10_UTM_CLK         MFP_CFG(GPIO10, AF1)
++#define GPIO36_U2D_RXERROR     MFP_CFG(GPIO36, AF3)
++#define GPIO60_U2D_RXERROR     MFP_CFG(GPIO60, AF1)
++#define GPIO87_U2D_RXERROR     MFP_CFG(GPIO87, AF5)
++#define GPIO34_UTM_RXVALID     MFP_CFG(GPIO34, AF3)
++#define GPIO58_UTM_RXVALID     MFP_CFG(GPIO58, AF2)
++#define GPIO85_UTM_RXVALID     MFP_CFG(GPIO85, AF5)
++#define GPIO35_UTM_RXACTIVE    MFP_CFG(GPIO35, AF3)
++#define GPIO59_UTM_RXACTIVE    MFP_CFG(GPIO59, AF1)
++#define GPIO86_UTM_RXACTIVE    MFP_CFG(GPIO86, AF5)
++#define GPIO73_UTM_TXREADY     MFP_CFG(GPIO73, AF1)
++#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3)
++#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3)
++#define GPIO102_UTM_LINESTATE_0        MFP_CFG(GPIO102, AF3)
++#define GPIO107_UTM_LINESTATE_0        MFP_CFG(GPIO107, AF4)
++#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3)
++#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3)
++#define GPIO103_UTM_LINESTATE_1        MFP_CFG(GPIO103, AF3)
++
++#define GPIO41_U2D_PHYDATA_0   MFP_CFG(GPIO41, AF3)
++#define GPIO42_U2D_PHYDATA_1   MFP_CFG(GPIO42, AF3)
++#define GPIO43_U2D_PHYDATA_2   MFP_CFG(GPIO43, AF3)
++#define GPIO44_U2D_PHYDATA_3   MFP_CFG(GPIO44, AF3)
++#define GPIO45_U2D_PHYDATA_4   MFP_CFG(GPIO45, AF3)
++#define GPIO46_U2D_PHYDATA_5   MFP_CFG(GPIO46, AF3)
++#define GPIO47_U2D_PHYDATA_6   MFP_CFG(GPIO47, AF3)
++#define GPIO48_U2D_PHYDATA_7   MFP_CFG(GPIO48, AF3)
++
++#define GPIO49_U2D_PHYDATA_0   MFP_CFG(GPIO49, AF3)
++#define GPIO50_U2D_PHYDATA_1   MFP_CFG(GPIO50, AF3)
++#define GPIO51_U2D_PHYDATA_2   MFP_CFG(GPIO51, AF3)
++#define GPIO52_U2D_PHYDATA_3   MFP_CFG(GPIO52, AF3)
++#define GPIO53_U2D_PHYDATA_4   MFP_CFG(GPIO53, AF3)
++#define GPIO54_U2D_PHYDATA_5   MFP_CFG(GPIO54, AF3)
++#define GPIO55_U2D_PHYDATA_6   MFP_CFG(GPIO55, AF3)
++#define GPIO56_U2D_PHYDATA_7   MFP_CFG(GPIO56, AF3)
++
++#define GPIO37_U2D_OPMODE0     MFP_CFG(GPIO37, AF4)
++#define GPIO61_U2D_OPMODE0     MFP_CFG(GPIO61, AF2)
++#define GPIO88_U2D_OPMODE0     MFP_CFG(GPIO88, AF7)
++
++#define GPIO38_U2D_OPMODE1     MFP_CFG(GPIO38, AF4)
++#define GPIO62_U2D_OPMODE1     MFP_CFG(GPIO62, AF2)
++#define GPIO104_U2D_OPMODE1    MFP_CFG(GPIO104, AF4)
++#define GPIO108_U2D_OPMODE1    MFP_CFG(GPIO108, AF5)
++
++#define GPIO74_U2D_RESET       MFP_CFG(GPIO74, AF1)
++#define GPIO93_U2D_RESET       MFP_CFG(GPIO93, AF2)
++#define GPIO98_U2D_RESET       MFP_CFG(GPIO98, AF3)
++
++#define GPIO67_U2D_SUSPEND     MFP_CFG(GPIO67, AF3)
++#define GPIO96_U2D_SUSPEND     MFP_CFG(GPIO96, AF2)
++#define GPIO101_U2D_SUSPEND    MFP_CFG(GPIO101, AF3)
++
++#define GPIO66_U2D_TERM_SEL    MFP_CFG(GPIO66, AF5)
++#define GPIO95_U2D_TERM_SEL    MFP_CFG(GPIO95, AF3)
++#define GPIO97_U2D_TERM_SEL    MFP_CFG(GPIO97, AF7)
++#define GPIO100_U2D_TERM_SEL   MFP_CFG(GPIO100, AF5)
++
++#define GPIO39_U2D_TXVALID     MFP_CFG(GPIO39, AF4)
++#define GPIO70_U2D_TXVALID     MFP_CFG(GPIO70, AF5)
++#define GPIO83_U2D_TXVALID     MFP_CFG(GPIO83, AF7)
++
++#define GPIO65_U2D_XCVR_SEL    MFP_CFG(GPIO65, AF5)
++#define GPIO94_U2D_XCVR_SEL    MFP_CFG(GPIO94, AF3)
++#define GPIO99_U2D_XCVR_SEL    MFP_CFG(GPIO99, AF5)
++
++/* USB Host 1.1 */
++#define GPIO2_2_USBH_PEN       MFP_CFG(GPIO2_2, AF1)
++#define GPIO3_2_USBH_PWR       MFP_CFG(GPIO3_2, AF1)
++
++/* USB P2 */
++#define GPIO97_USB_P2_2                MFP_CFG(GPIO97, AF2)
++#define GPIO97_USB_P2_6                MFP_CFG(GPIO97, AF4)
++#define GPIO98_USB_P2_2                MFP_CFG(GPIO98, AF4)
++#define GPIO98_USB_P2_6                MFP_CFG(GPIO98, AF2)
++#define GPIO99_USB_P2_1                MFP_CFG(GPIO99, AF2)
++#define GPIO100_USB_P2_4       MFP_CFG(GPIO100, AF2)
++#define GPIO101_USB_P2_8       MFP_CFG(GPIO101, AF2)
++#define GPIO102_USB_P2_3       MFP_CFG(GPIO102, AF2)
++#define GPIO103_USB_P2_5       MFP_CFG(GPIO103, AF2)
++#define GPIO104_USB_P2_7       MFP_CFG(GPIO104, AF2)
++
++/* USB P3 */
++#define GPIO75_USB_P3_1                MFP_CFG(GPIO75, AF2)
++#define GPIO76_USB_P3_2                MFP_CFG(GPIO76, AF2)
++#define GPIO77_USB_P3_3                MFP_CFG(GPIO77, AF2)
++#define GPIO78_USB_P3_4                MFP_CFG(GPIO78, AF2)
++#define GPIO79_USB_P3_5                MFP_CFG(GPIO79, AF2)
++#define GPIO80_USB_P3_6                MFP_CFG(GPIO80, AF2)
++
++#define GPIO13_CHOUT0          MFP_CFG(GPIO13, AF6)
++#define GPIO14_CHOUT1          MFP_CFG(GPIO14, AF6)
++
++#define GPIO2_RDY              MFP_CFG(GPIO2, AF1)
++#define GPIO5_NPIOR            MFP_CFG(GPIO5, AF3)
++
++#define GPIO11_PWM0_OUT                MFP_CFG(GPIO11, AF1)
++#define GPIO12_PWM1_OUT                MFP_CFG(GPIO12, AF1)
++#define GPIO13_PWM2_OUT                MFP_CFG(GPIO13, AF1)
++#define GPIO14_PWM3_OUT                MFP_CFG(GPIO14, AF1)
++
++#endif /* __ASM_ARCH_MFP_PXA320_H */
+Index: linux-2.6.22/include/asm-arm/arch-pxa/mfp.h
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/include/asm-arm/arch-pxa/mfp.h 2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,576 @@
++/*
++ * linux/include/asm-arm/arch-pxa/mfp.h
++ *
++ * Multi-Function Pin Definitions
++ *
++ * Copyright (C) 2007 Marvell International Ltd.
++ *
++ * 2007-8-21: eric miao <eric.y.miao@gmail.com>
++ *            initial version
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ */
++
++#ifndef __ASM_ARCH_MFP_H
++#define __ASM_ARCH_MFP_H
++
++#define MFPR_BASE      (0x40e10000)
++#define MFPR_SIZE      (PAGE_SIZE)
++
++#define mfp_to_gpio(m) ((m) % 128)
++
++/* list of all the configurable MFP pins */
++enum {
++       MFP_PIN_INVALID = -1,
++
++       MFP_PIN_GPIO0 = 0,
++       MFP_PIN_GPIO1,
++       MFP_PIN_GPIO2,
++       MFP_PIN_GPIO3,
++       MFP_PIN_GPIO4,
++       MFP_PIN_GPIO5,
++       MFP_PIN_GPIO6,
++       MFP_PIN_GPIO7,
++       MFP_PIN_GPIO8,
++       MFP_PIN_GPIO9,
++       MFP_PIN_GPIO10,
++       MFP_PIN_GPIO11,
++       MFP_PIN_GPIO12,
++       MFP_PIN_GPIO13,
++       MFP_PIN_GPIO14,
++       MFP_PIN_GPIO15,
++       MFP_PIN_GPIO16,
++       MFP_PIN_GPIO17,
++       MFP_PIN_GPIO18,
++       MFP_PIN_GPIO19,
++       MFP_PIN_GPIO20,
++       MFP_PIN_GPIO21,
++       MFP_PIN_GPIO22,
++       MFP_PIN_GPIO23,
++       MFP_PIN_GPIO24,
++       MFP_PIN_GPIO25,
++       MFP_PIN_GPIO26,
++       MFP_PIN_GPIO27,
++       MFP_PIN_GPIO28,
++       MFP_PIN_GPIO29,
++       MFP_PIN_GPIO30,
++       MFP_PIN_GPIO31,
++       MFP_PIN_GPIO32,
++       MFP_PIN_GPIO33,
++       MFP_PIN_GPIO34,
++       MFP_PIN_GPIO35,
++       MFP_PIN_GPIO36,
++       MFP_PIN_GPIO37,
++       MFP_PIN_GPIO38,
++       MFP_PIN_GPIO39,
++       MFP_PIN_GPIO40,
++       MFP_PIN_GPIO41,
++       MFP_PIN_GPIO42,
++       MFP_PIN_GPIO43,
++       MFP_PIN_GPIO44,
++       MFP_PIN_GPIO45,
++       MFP_PIN_GPIO46,
++       MFP_PIN_GPIO47,
++       MFP_PIN_GPIO48,
++       MFP_PIN_GPIO49,
++       MFP_PIN_GPIO50,
++       MFP_PIN_GPIO51,
++       MFP_PIN_GPIO52,
++       MFP_PIN_GPIO53,
++       MFP_PIN_GPIO54,
++       MFP_PIN_GPIO55,
++       MFP_PIN_GPIO56,
++       MFP_PIN_GPIO57,
++       MFP_PIN_GPIO58,
++       MFP_PIN_GPIO59,
++       MFP_PIN_GPIO60,
++       MFP_PIN_GPIO61,
++       MFP_PIN_GPIO62,
++       MFP_PIN_GPIO63,
++       MFP_PIN_GPIO64,
++       MFP_PIN_GPIO65,
++       MFP_PIN_GPIO66,
++       MFP_PIN_GPIO67,
++       MFP_PIN_GPIO68,
++       MFP_PIN_GPIO69,
++       MFP_PIN_GPIO70,
++       MFP_PIN_GPIO71,
++       MFP_PIN_GPIO72,
++       MFP_PIN_GPIO73,
++       MFP_PIN_GPIO74,
++       MFP_PIN_GPIO75,
++       MFP_PIN_GPIO76,
++       MFP_PIN_GPIO77,
++       MFP_PIN_GPIO78,
++       MFP_PIN_GPIO79,
++       MFP_PIN_GPIO80,
++       MFP_PIN_GPIO81,
++       MFP_PIN_GPIO82,
++       MFP_PIN_GPIO83,
++       MFP_PIN_GPIO84,
++       MFP_PIN_GPIO85,
++       MFP_PIN_GPIO86,
++       MFP_PIN_GPIO87,
++       MFP_PIN_GPIO88,
++       MFP_PIN_GPIO89,
++       MFP_PIN_GPIO90,
++       MFP_PIN_GPIO91,
++       MFP_PIN_GPIO92,
++       MFP_PIN_GPIO93,
++       MFP_PIN_GPIO94,
++       MFP_PIN_GPIO95,
++       MFP_PIN_GPIO96,
++       MFP_PIN_GPIO97,
++       MFP_PIN_GPIO98,
++       MFP_PIN_GPIO99,
++       MFP_PIN_GPIO100,
++       MFP_PIN_GPIO101,
++       MFP_PIN_GPIO102,
++       MFP_PIN_GPIO103,
++       MFP_PIN_GPIO104,
++       MFP_PIN_GPIO105,
++       MFP_PIN_GPIO106,
++       MFP_PIN_GPIO107,
++       MFP_PIN_GPIO108,
++       MFP_PIN_GPIO109,
++       MFP_PIN_GPIO110,
++       MFP_PIN_GPIO111,
++       MFP_PIN_GPIO112,
++       MFP_PIN_GPIO113,
++       MFP_PIN_GPIO114,
++       MFP_PIN_GPIO115,
++       MFP_PIN_GPIO116,
++       MFP_PIN_GPIO117,
++       MFP_PIN_GPIO118,
++       MFP_PIN_GPIO119,
++       MFP_PIN_GPIO120,
++       MFP_PIN_GPIO121,
++       MFP_PIN_GPIO122,
++       MFP_PIN_GPIO123,
++       MFP_PIN_GPIO124,
++       MFP_PIN_GPIO125,
++       MFP_PIN_GPIO126,
++       MFP_PIN_GPIO127,
++       MFP_PIN_GPIO0_2,
++       MFP_PIN_GPIO1_2,
++       MFP_PIN_GPIO2_2,
++       MFP_PIN_GPIO3_2,
++       MFP_PIN_GPIO4_2,
++       MFP_PIN_GPIO5_2,
++       MFP_PIN_GPIO6_2,
++       MFP_PIN_GPIO7_2,
++       MFP_PIN_GPIO8_2,
++       MFP_PIN_GPIO9_2,
++       MFP_PIN_GPIO10_2,
++       MFP_PIN_GPIO11_2,
++       MFP_PIN_GPIO12_2,
++       MFP_PIN_GPIO13_2,
++       MFP_PIN_GPIO14_2,
++       MFP_PIN_GPIO15_2,
++       MFP_PIN_GPIO16_2,
++       MFP_PIN_GPIO17_2,
++
++       MFP_PIN_ULPI_STP,
++       MFP_PIN_ULPI_NXT,
++       MFP_PIN_ULPI_DIR,
++
++       MFP_PIN_nXCVREN,
++       MFP_PIN_DF_CLE_nOE,
++       MFP_PIN_DF_nADV1_ALE,
++       MFP_PIN_DF_SCLK_E,
++       MFP_PIN_DF_SCLK_S,
++       MFP_PIN_nBE0,
++       MFP_PIN_nBE1,
++       MFP_PIN_DF_nADV2_ALE,
++       MFP_PIN_DF_INT_RnB,
++       MFP_PIN_DF_nCS0,
++       MFP_PIN_DF_nCS1,
++       MFP_PIN_nLUA,
++       MFP_PIN_nLLA,
++       MFP_PIN_DF_nWE,
++       MFP_PIN_DF_ALE_nWE,
++       MFP_PIN_DF_nRE_nOE,
++       MFP_PIN_DF_ADDR0,
++       MFP_PIN_DF_ADDR1,
++       MFP_PIN_DF_ADDR2,
++       MFP_PIN_DF_ADDR3,
++       MFP_PIN_DF_IO0,
++       MFP_PIN_DF_IO1,
++       MFP_PIN_DF_IO2,
++       MFP_PIN_DF_IO3,
++       MFP_PIN_DF_IO4,
++       MFP_PIN_DF_IO5,
++       MFP_PIN_DF_IO6,
++       MFP_PIN_DF_IO7,
++       MFP_PIN_DF_IO8,
++       MFP_PIN_DF_IO9,
++       MFP_PIN_DF_IO10,
++       MFP_PIN_DF_IO11,
++       MFP_PIN_DF_IO12,
++       MFP_PIN_DF_IO13,
++       MFP_PIN_DF_IO14,
++       MFP_PIN_DF_IO15,
++
++       MFP_PIN_MAX,
++};
++
++/*
++ * Table that determines the low power modes outputs, with actual settings
++ * used in parentheses for don't-care values. Except for the float output,
++ * the configured driven and pulled levels match, so if there is a need for
++ * non-LPM pulled output, the same configuration could probably be used.
++ *
++ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
++ *                 (bit 7)    (bit 8)    (bit 14d)   (bit 13d)
++ *
++ * Drive 0          0          0           0           X (1)      0
++ * Drive 1          0          1           X (1)       0         0
++ * Pull hi (1)      1          X(1)        1           0         0
++ * Pull lo (0)      1          X(0)        0           1         0
++ * Z (float)        1          X(0)        0           0         0
++ */
++#define MFP_LPM_DRIVE_LOW      0x8
++#define MFP_LPM_DRIVE_HIGH     0x6
++#define MFP_LPM_PULL_HIGH      0x7
++#define MFP_LPM_PULL_LOW       0x9
++#define MFP_LPM_FLOAT          0x1
++#define MFP_LPM_PULL_NEITHER   0x0
++
++/*
++ * The pullup and pulldown state of the MFP pin is by default determined by
++ * selected alternate function. In case some buggy devices need to override
++ * this default behavior,  pxa3xx_mfp_set_pull() can be invoked with one of
++ * the following definition as the parameter.
++ *
++ * Definition       pull_sel  pullup_en  pulldown_en
++ * MFP_PULL_HIGH        1         1        0
++ * MFP_PULL_LOW         1         0        1
++ * MFP_PULL_BOTH        1         1        1
++ * MFP_PULL_NONE        1         0        0
++ * MFP_PULL_DEFAULT     0         X        X
++ *
++ * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN
++ * bits,  which will cause potential conflicts with the low power mode
++ * setting, device drivers should take care of this
++ */
++#define MFP_PULL_BOTH          (0x7u)
++#define MFP_PULL_HIGH          (0x6u)
++#define MFP_PULL_LOW           (0x5u)
++#define MFP_PULL_NONE          (0x4u)
++#define MFP_PULL_DEFAULT       (0x0u)
++
++#define MFP_AF0                        (0)
++#define MFP_AF1                        (1)
++#define MFP_AF2                        (2)
++#define MFP_AF3                        (3)
++#define MFP_AF4                        (4)
++#define MFP_AF5                        (5)
++#define MFP_AF6                        (6)
++#define MFP_AF7                        (7)
++
++#define MFP_DS01X              (0)
++#define MFP_DS02X              (1)
++#define MFP_DS03X              (2)
++#define MFP_DS04X              (3)
++#define MFP_DS06X              (4)
++#define MFP_DS08X              (5)
++#define MFP_DS10X              (6)
++#define MFP_DS12X              (7)
++
++#define MFP_EDGE_BOTH          0x3
++#define MFP_EDGE_RISE          0x2
++#define MFP_EDGE_FALL          0x1
++#define MFP_EDGE_NONE          0x0
++
++#define MFPR_AF_MASK           0x0007
++#define MFPR_DRV_MASK          0x1c00
++#define MFPR_RDH_MASK          0x0200
++#define MFPR_LPM_MASK          0xe180
++#define MFPR_PULL_MASK         0xe000
++#define MFPR_EDGE_MASK         0x0070
++
++#define MFPR_ALT_OFFSET                0
++#define MFPR_ERE_OFFSET                4
++#define MFPR_EFE_OFFSET                5
++#define MFPR_EC_OFFSET         6
++#define MFPR_SON_OFFSET                7
++#define MFPR_SD_OFFSET         8
++#define MFPR_SS_OFFSET         9
++#define MFPR_DRV_OFFSET                10
++#define MFPR_PD_OFFSET         13
++#define MFPR_PU_OFFSET         14
++#define MFPR_PS_OFFSET         15
++
++#define MFPR(af, drv, rdh, lpm, edge) \
++       (((af) & 0x7) | (((drv) & 0x7) << 10) |\
++        (((rdh) & 0x1) << 9) |\
++        (((lpm) & 0x3) << 7) |\
++        (((lpm) & 0x4) << 12)|\
++        (((lpm) & 0x8) << 10)|\
++        ((!(edge)) << 6) |\
++        (((edge) & 0x1) << 5) |\
++        (((edge) & 0x2) << 3))
++
++/*
++ * a possible MFP configuration is represented by a 32-bit integer
++ * bit  0..15 - MFPR value (16-bit)
++ * bit 16..31 - mfp pin index (used to obtain the MFPR offset)
++ *
++ * to facilitate the definition, the following macros are provided
++ *
++ * MFPR_DEFAULT - default MFPR value, with
++ *               alternate function = 0,
++ *               drive strength = fast 1mA (MFP_DS01X)
++ *               low power mode = default
++ *               release dalay hold = false (RDH bit)
++ *               edge detection = none
++ *
++ * MFP_CFG     - default MFPR value with alternate function
++ * MFP_CFG_DRV - default MFPR value with alternate function and
++ *               pin drive strength
++ * MFP_CFG_LPM - default MFPR value with alternate function and
++ *               low power mode
++ * MFP_CFG_X   - default MFPR value with alternate function,
++ *               pin drive strength and low power mode
++ *
++ * use
++ *
++ * MFP_CFG_PIN - to get the MFP pin index
++ * MFP_CFG_VAL - to get the corresponding MFPR value
++ */
++
++typedef uint32_t mfp_cfg_t;
++
++#define MFP_CFG_PIN(mfp_cfg)   (((mfp_cfg) >> 16) & 0xffff)
++#define MFP_CFG_VAL(mfp_cfg)   ((mfp_cfg) & 0xffff)
++
++#define MFPR_DEFAULT   (0x0000)
++
++#define MFP_CFG(pin, af)               \
++       ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af))
++
++#define MFP_CFG_DRV(pin, af, drv)      \
++       ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
++        ((MFP_##drv) << 10) | (MFP_##af))
++
++#define MFP_CFG_LPM(pin, af, lpm)      \
++       ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af) |\
++        (((MFP_LPM_##lpm) & 0x3) << 7)  |\
++        (((MFP_LPM_##lpm) & 0x4) << 12) |\
++        (((MFP_LPM_##lpm) & 0x8) << 10))
++
++#define MFP_CFG_X(pin, af, drv, lpm)   \
++       ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
++        ((MFP_##drv) << 10) | (MFP_##af) |\
++        (((MFP_LPM_##lpm) & 0x3) << 7)  |\
++        (((MFP_LPM_##lpm) & 0x4) << 12) |\
++        (((MFP_LPM_##lpm) & 0x8) << 10))
++
++/* common MFP configurations - processor specific ones defined
++ * in mfp-pxa3xx.h
++ */
++#define GPIO0_GPIO             MFP_CFG(GPIO0, AF0)
++#define GPIO1_GPIO             MFP_CFG(GPIO1, AF0)
++#define GPIO2_GPIO             MFP_CFG(GPIO2, AF0)
++#define GPIO3_GPIO             MFP_CFG(GPIO3, AF0)
++#define GPIO4_GPIO             MFP_CFG(GPIO4, AF0)
++#define GPIO5_GPIO             MFP_CFG(GPIO5, AF0)
++#define GPIO6_GPIO             MFP_CFG(GPIO6, AF0)
++#define GPIO7_GPIO             MFP_CFG(GPIO7, AF0)
++#define GPIO8_GPIO             MFP_CFG(GPIO8, AF0)
++#define GPIO9_GPIO             MFP_CFG(GPIO9, AF0)
++#define GPIO10_GPIO            MFP_CFG(GPIO10, AF0)
++#define GPIO11_GPIO            MFP_CFG(GPIO11, AF0)
++#define GPIO12_GPIO            MFP_CFG(GPIO12, AF0)
++#define GPIO13_GPIO            MFP_CFG(GPIO13, AF0)
++#define GPIO14_GPIO            MFP_CFG(GPIO14, AF0)
++#define GPIO15_GPIO            MFP_CFG(GPIO15, AF0)
++#define GPIO16_GPIO            MFP_CFG(GPIO16, AF0)
++#define GPIO17_GPIO            MFP_CFG(GPIO17, AF0)
++#define GPIO18_GPIO            MFP_CFG(GPIO18, AF0)
++#define GPIO19_GPIO            MFP_CFG(GPIO19, AF0)
++#define GPIO20_GPIO            MFP_CFG(GPIO20, AF0)
++#define GPIO21_GPIO            MFP_CFG(GPIO21, AF0)
++#define GPIO22_GPIO            MFP_CFG(GPIO22, AF0)
++#define GPIO23_GPIO            MFP_CFG(GPIO23, AF0)
++#define GPIO24_GPIO            MFP_CFG(GPIO24, AF0)
++#define GPIO25_GPIO            MFP_CFG(GPIO25, AF0)
++#define GPIO26_GPIO            MFP_CFG(GPIO26, AF0)
++#define GPIO27_GPIO            MFP_CFG(GPIO27, AF0)
++#define GPIO28_GPIO            MFP_CFG(GPIO28, AF0)
++#define GPIO29_GPIO            MFP_CFG(GPIO29, AF0)
++#define GPIO30_GPIO            MFP_CFG(GPIO30, AF0)
++#define GPIO31_GPIO            MFP_CFG(GPIO31, AF0)
++#define GPIO32_GPIO            MFP_CFG(GPIO32, AF0)
++#define GPIO33_GPIO            MFP_CFG(GPIO33, AF0)
++#define GPIO34_GPIO            MFP_CFG(GPIO34, AF0)
++#define GPIO35_GPIO            MFP_CFG(GPIO35, AF0)
++#define GPIO36_GPIO            MFP_CFG(GPIO36, AF0)
++#define GPIO37_GPIO            MFP_CFG(GPIO37, AF0)
++#define GPIO38_GPIO            MFP_CFG(GPIO38, AF0)
++#define GPIO39_GPIO            MFP_CFG(GPIO39, AF0)
++#define GPIO40_GPIO            MFP_CFG(GPIO40, AF0)
++#define GPIO41_GPIO            MFP_CFG(GPIO41, AF0)
++#define GPIO42_GPIO            MFP_CFG(GPIO42, AF0)
++#define GPIO43_GPIO            MFP_CFG(GPIO43, AF0)
++#define GPIO44_GPIO            MFP_CFG(GPIO44, AF0)
++#define GPIO45_GPIO            MFP_CFG(GPIO45, AF0)
++
++#define GPIO47_GPIO            MFP_CFG(GPIO47, AF0)
++#define GPIO48_GPIO            MFP_CFG(GPIO48, AF0)
++
++#define GPIO53_GPIO            MFP_CFG(GPIO53, AF0)
++#define GPIO54_GPIO            MFP_CFG(GPIO54, AF0)
++#define GPIO55_GPIO            MFP_CFG(GPIO55, AF0)
++
++#define GPIO57_GPIO            MFP_CFG(GPIO57, AF0)
++
++#define GPIO63_GPIO            MFP_CFG(GPIO63, AF0)
++#define GPIO64_GPIO            MFP_CFG(GPIO64, AF0)
++#define GPIO65_GPIO            MFP_CFG(GPIO65, AF0)
++#define GPIO66_GPIO            MFP_CFG(GPIO66, AF0)
++#define GPIO67_GPIO            MFP_CFG(GPIO67, AF0)
++#define GPIO68_GPIO            MFP_CFG(GPIO68, AF0)
++#define GPIO69_GPIO            MFP_CFG(GPIO69, AF0)
++#define GPIO70_GPIO            MFP_CFG(GPIO70, AF0)
++#define GPIO71_GPIO            MFP_CFG(GPIO71, AF0)
++#define GPIO72_GPIO            MFP_CFG(GPIO72, AF0)
++#define GPIO73_GPIO            MFP_CFG(GPIO73, AF0)
++#define GPIO74_GPIO            MFP_CFG(GPIO74, AF0)
++#define GPIO75_GPIO            MFP_CFG(GPIO75, AF0)
++#define GPIO76_GPIO            MFP_CFG(GPIO76, AF0)
++#define GPIO77_GPIO            MFP_CFG(GPIO77, AF0)
++#define GPIO78_GPIO            MFP_CFG(GPIO78, AF0)
++#define GPIO79_GPIO            MFP_CFG(GPIO79, AF0)
++#define GPIO80_GPIO            MFP_CFG(GPIO80, AF0)
++#define GPIO81_GPIO            MFP_CFG(GPIO81, AF0)
++#define GPIO82_GPIO            MFP_CFG(GPIO82, AF0)
++#define GPIO83_GPIO            MFP_CFG(GPIO83, AF0)
++#define GPIO84_GPIO            MFP_CFG(GPIO84, AF0)
++#define GPIO85_GPIO            MFP_CFG(GPIO85, AF0)
++#define GPIO86_GPIO            MFP_CFG(GPIO86, AF0)
++#define GPIO87_GPIO            MFP_CFG(GPIO87, AF0)
++#define GPIO88_GPIO            MFP_CFG(GPIO88, AF0)
++#define GPIO89_GPIO            MFP_CFG(GPIO89, AF0)
++#define GPIO90_GPIO            MFP_CFG(GPIO90, AF0)
++#define GPIO91_GPIO            MFP_CFG(GPIO91, AF0)
++#define GPIO92_GPIO            MFP_CFG(GPIO92, AF0)
++#define GPIO93_GPIO            MFP_CFG(GPIO93, AF0)
++#define GPIO94_GPIO            MFP_CFG(GPIO94, AF0)
++#define GPIO95_GPIO            MFP_CFG(GPIO95, AF0)
++#define GPIO96_GPIO            MFP_CFG(GPIO96, AF0)
++#define GPIO97_GPIO            MFP_CFG(GPIO97, AF0)
++#define GPIO98_GPIO            MFP_CFG(GPIO98, AF0)
++#define GPIO99_GPIO            MFP_CFG(GPIO99, AF0)
++#define GPIO100_GPIO           MFP_CFG(GPIO100, AF0)
++#define GPIO101_GPIO           MFP_CFG(GPIO101, AF0)
++#define GPIO102_GPIO           MFP_CFG(GPIO102, AF0)
++#define GPIO103_GPIO           MFP_CFG(GPIO103, AF0)
++#define GPIO104_GPIO           MFP_CFG(GPIO104, AF0)
++#define GPIO105_GPIO           MFP_CFG(GPIO105, AF0)
++#define GPIO106_GPIO           MFP_CFG(GPIO106, AF0)
++#define GPIO107_GPIO           MFP_CFG(GPIO107, AF0)
++#define GPIO108_GPIO           MFP_CFG(GPIO108, AF0)
++#define GPIO109_GPIO           MFP_CFG(GPIO109, AF0)
++#define GPIO110_GPIO           MFP_CFG(GPIO110, AF0)
++#define GPIO111_GPIO           MFP_CFG(GPIO111, AF0)
++#define GPIO112_GPIO           MFP_CFG(GPIO112, AF0)
++#define GPIO113_GPIO           MFP_CFG(GPIO113, AF0)
++#define GPIO114_GPIO           MFP_CFG(GPIO114, AF0)
++#define GPIO115_GPIO           MFP_CFG(GPIO115, AF0)
++#define GPIO116_GPIO           MFP_CFG(GPIO116, AF0)
++#define GPIO117_GPIO           MFP_CFG(GPIO117, AF0)
++#define GPIO118_GPIO           MFP_CFG(GPIO118, AF0)
++#define GPIO119_GPIO           MFP_CFG(GPIO119, AF0)
++#define GPIO120_GPIO           MFP_CFG(GPIO120, AF0)
++#define GPIO121_GPIO           MFP_CFG(GPIO121, AF0)
++#define GPIO122_GPIO           MFP_CFG(GPIO122, AF0)
++#define GPIO123_GPIO           MFP_CFG(GPIO123, AF0)
++#define GPIO124_GPIO           MFP_CFG(GPIO124, AF0)
++#define GPIO125_GPIO           MFP_CFG(GPIO125, AF0)
++#define GPIO126_GPIO           MFP_CFG(GPIO126, AF0)
++#define GPIO127_GPIO           MFP_CFG(GPIO127, AF0)
++
++#define GPIO0_2_GPIO           MFP_CFG(GPIO0_2, AF0)
++#define GPIO1_2_GPIO           MFP_CFG(GPIO1_2, AF0)
++#define GPIO2_2_GPIO           MFP_CFG(GPIO2_2, AF0)
++#define GPIO3_2_GPIO           MFP_CFG(GPIO3_2, AF0)
++#define GPIO4_2_GPIO           MFP_CFG(GPIO4_2, AF0)
++#define GPIO5_2_GPIO           MFP_CFG(GPIO5_2, AF0)
++#define GPIO6_2_GPIO           MFP_CFG(GPIO6_2, AF0)
++
++/*
++ * each MFP pin will have a MFPR register, since the offset of the
++ * register varies between processors, the processor specific code
++ * should initialize the pin offsets by pxa3xx_mfp_init_addr()
++ *
++ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
++ * structure, which represents a range of MFP pins from "start" to
++ * "end", with the offset begining at "offset", to define a single
++ * pin, let "end" = -1
++ *
++ * use
++ *
++ * MFP_ADDR_X() to define a range of pins
++ * MFP_ADDR()   to define a single pin
++ * MFP_ADDR_END to signal the end of pin offset definitions
++ */
++struct pxa3xx_mfp_addr_map {
++       unsigned int    start;
++       unsigned int    end;
++       unsigned long   offset;
++};
++
++#define MFP_ADDR_X(start, end, offset) \
++       { MFP_PIN_##start, MFP_PIN_##end, offset }
++
++#define MFP_ADDR(pin, offset) \
++       { MFP_PIN_##pin, -1, offset }
++
++#define MFP_ADDR_END   { MFP_PIN_INVALID, 0 }
++
++struct pxa3xx_mfp_pin {
++       unsigned long   mfpr_off;       /* MFPRxx register offset */
++       unsigned long   mfpr_val;       /* MFPRxx register value */
++};
++
++/*
++ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
++ * to the MFPR register
++ */
++unsigned long pxa3xx_mfp_read(int mfp);
++void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
++
++/*
++ * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength
++ * pxa3xx_mfp_set_rdh  - set MFP release delay hold on/off
++ * pxa3xx_mfp_set_lpm  - set MFP low power mode state
++ * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode
++ *
++ * use these functions to override/change the default configuration
++ * done by pxa3xx_mfp_set_config(s)
++ */
++void pxa3xx_mfp_set_afds(int mfp, int af, int ds);
++void pxa3xx_mfp_set_rdh(int mfp, int rdh);
++void pxa3xx_mfp_set_lpm(int mfp, int lpm);
++void pxa3xx_mfp_set_edge(int mfp, int edge);
++
++/*
++ * pxa3xx_mfp_config - configure the MFPR registers
++ *
++ * used by board specific initialization code
++ */
++void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num);
++
++/*
++ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
++ * index and MFPR register offset
++ *
++ * used by processor specific code
++ */
++void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
++void __init pxa3xx_init_mfp(void);
++
++#endif /* __ASM_ARCH_MFP_H */
+Index: linux-2.6.22/include/asm-arm/arch-pxa/pxa-regs.h
+===================================================================
+--- linux-2.6.22.orig/include/asm-arm/arch-pxa/pxa-regs.h       2007-09-24 20:57:20.000000000 +0200
++++ linux-2.6.22/include/asm-arm/arch-pxa/pxa-regs.h    2007-09-24 20:57:20.000000000 +0200
+@@ -1184,7 +1184,7 @@
+ 
+ #define GPIO_bit(x)    (1 << ((x) & 0x1f))
+ 
+-#ifdef CONFIG_PXA27x
++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+ 
+ /* Interrupt Controller */
+ 
+Index: linux-2.6.22/include/asm-arm/arch-pxa/pxa3xx-regs.h
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/include/asm-arm/arch-pxa/pxa3xx-regs.h 2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,75 @@
++/*
++ * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h
++ *
++ * PXA3xx specific register definitions
++ *
++ * Copyright (C) 2007 Marvell International Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef __ASM_ARCH_PXA3XX_REGS_H
++#define __ASM_ARCH_PXA3XX_REGS_H
++
++/*
++ * Application Subsystem Clock
++ */
++#define ACCR           __REG(0x41340000)       /* Application Subsystem Clock Configuration Register */
++#define ACSR           __REG(0x41340004)       /* Application Subsystem Clock Status Register */
++#define AICSR          __REG(0x41340008)       /* Application Subsystem Interrupt Control/Status Register */
++#define CKENA          __REG(0x4134000C)       /* A Clock Enable Register */
++#define CKENB          __REG(0x41340010)       /* B Clock Enable Register */
++#define AC97_DIV       __REG(0x41340014)       /* AC97 clock divisor value register */
++
++/*
++ * Clock Enable Bit
++ */
++#define CKEN_LCD       1       /* < LCD Clock Enable */
++#define CKEN_USBH      2       /* < USB host clock enable */
++#define CKEN_CAMERA    3       /* < Camera interface clock enable */
++#define CKEN_NAND      4       /* < NAND Flash Controller Clock Enable */
++#define CKEN_USB2      6       /* < USB 2.0 client clock enable. */
++#define CKEN_DMC       8       /* < Dynamic Memory Controller clock enable */
++#define CKEN_SMC       9       /* < Static Memory Controller clock enable */
++#define CKEN_ISC       10      /* < Internal SRAM Controller clock enable */
++#define CKEN_BOOT      11      /* < Boot rom clock enable */
++#define CKEN_MMC1      12      /* < MMC1 Clock enable */
++#define CKEN_MMC2      13      /* < MMC2 clock enable */
++#define CKEN_KEYPAD    14      /* < Keypand Controller Clock Enable */
++#define CKEN_CIR       15      /* < Consumer IR Clock Enable */
++#define CKEN_USIM0     17      /* < USIM[0] Clock Enable */
++#define CKEN_USIM1     18      /* < USIM[1] Clock Enable */
++#define CKEN_TPM       19      /* < TPM clock enable */
++#define CKEN_UDC       20      /* < UDC clock enable */
++#define CKEN_BTUART    21      /* < BTUART clock enable */
++#define CKEN_FFUART    22      /* < FFUART clock enable */
++#define CKEN_STUART    23      /* < STUART clock enable */
++#define CKEN_AC97      24      /* < AC97 clock enable */
++#define CKEN_TOUCH     25      /* < Touch screen Interface Clock Enable */
++#define CKEN_SSP1      26      /* < SSP1 clock enable */
++#define CKEN_SSP2      27      /* < SSP2 clock enable */
++#define CKEN_SSP3      28      /* < SSP3 clock enable */
++#define CKEN_SSP4      29      /* < SSP4 clock enable */
++#define CKEN_MSL0      30      /* < MSL0 clock enable */
++#define CKEN_PWM0      32      /* < PWM[0] clock enable */
++#define CKEN_PWM1      33      /* < PWM[1] clock enable */
++#define CKEN_I2C       36      /* < I2C clock enable */
++#define CKEN_INTC      38      /* < Interrupt controller clock enable */
++#define CKEN_GPIO      39      /* < GPIO clock enable */
++#define CKEN_1WIRE     40      /* < 1-wire clock enable */
++#define CKEN_HSIO2     41      /* < HSIO2 clock enable */
++#define CKEN_MINI_IM   48      /* < Mini-IM */
++#define CKEN_MINI_LCD  49      /* < Mini LCD */
++
++#if defined(CONFIG_CPU_PXA310)
++#define CKEN_MMC3      5       /* < MMC3 Clock Enable */
++#define CKEN_MVED      43      /* < MVED clock enable */
++#endif
++
++/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
++#define PXA300_CKEN_GRAPHICS   42      /* Graphics controller clock enable */
++#define PXA320_CKEN_GRAPHICS   7       /* Graphics controller clock enable */
++
++#endif /* __ASM_ARCH_PXA3XX_REGS_H */
+Index: linux-2.6.22/include/asm-arm/arch-pxa/timex.h
+===================================================================
+--- linux-2.6.22.orig/include/asm-arm/arch-pxa/timex.h  2007-07-09 01:32:17.000000000 +0200
++++ linux-2.6.22/include/asm-arm/arch-pxa/timex.h       2007-09-24 20:57:20.000000000 +0200
+@@ -21,4 +21,6 @@
+ #else
+ #define CLOCK_TICK_RATE 3250000
+ #endif
++#else
++#define CLOCK_TICK_RATE 3250000
+ #endif
+Index: linux-2.6.22/include/asm-arm/arch-pxa/zylonite.h
+===================================================================
+--- /dev/null   1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.22/include/asm-arm/arch-pxa/zylonite.h    2007-09-24 20:57:20.000000000 +0200
+@@ -0,0 +1,35 @@
++#ifndef __ASM_ARCH_ZYLONITE_H
++#define __ASM_ARCH_ZYLONITE_H
++
++#define ZYLONITE_ETH_PHYS      0x14000000
++
++/* the following variables are processor specific and initialized
++ * by the corresponding zylonite_pxa3xx_init()
++ */
++extern int gpio_backlight;
++extern int gpio_eth_irq;
++
++extern int lcd_id;
++extern int lcd_orientation;
++
++#ifdef CONFIG_CPU_PXA300
++extern void zylonite_pxa300_init(void);
++#else
++static inline void zylonite_pxa300_init(void)
++{
++       if (cpu_is_pxa300() || cpu_is_pxa310())
++               panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
++}
++#endif
++
++#ifdef CONFIG_CPU_PXA320
++extern void zylonite_pxa320_init(void);
++#else
++static inline void zylonite_pxa320_init(void)
++{
++       if (cpu_is_pxa320())
++               panic("%s: PXA320 not supported\n", __FUNCTION__);
++}
++#endif
++
++#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/defconfig-zylonite b/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/defconfig-zylonite
new file mode 100644
index 0000000000..f10c01a3b6
--- /dev/null
+++ b/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/defconfig-zylonite
@@ -0,0 +1,1457 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc4
+# Tue Sep 25 12:39:31 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_MACH_ZYLONITE=y
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_MACH_HTCUNIVERSAL is not set
+CONFIG_PXA3xx=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,38400 root=/dev/mtdblock2 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+# CONFIG_MCS_FIR is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+# CONFIG_USB_BELKIN is not set
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_POWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+
+#
+# Multi-Function Devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_LCD_QVGA is not set
+CONFIG_FB_PXA_LCD_VGA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_OHAND_CLUT224=y
+# CONFIG_LOGO_OZ240_CLUT224 is not set
+# CONFIG_LOGO_OZ480_CLUT224 is not set
+# CONFIG_LOGO_OZ640_CLUT224 is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=y
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=y
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_SYSFS is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/irq-gpio-offby1.patch b/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/irq-gpio-offby1.patch
new file mode 100644
index 0000000000..fcf5bb3ae0
--- /dev/null
+++ b/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/irq-gpio-offby1.patch
@@ -0,0 +1,17 @@
+---
+ arch/arm/mach-pxa/irq.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+Index: linux-2.6.22/arch/arm/mach-pxa/irq.c
+===================================================================
+--- linux-2.6.22.orig/arch/arm/mach-pxa/irq.c   2007-09-25 01:42:57.000000000 +0200
++++ linux-2.6.22/arch/arm/mach-pxa/irq.c        2007-09-25 01:43:03.000000000 +0200
+@@ -301,7 +301,7 @@
+                set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+        }
+ 
+-       for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(gpio_nr); irq++) {
++       for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) {
+                set_irq_chip(irq, &pxa_muxed_gpio_chip);
+                set_irq_handler(irq, handle_edge_irq);
+                set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
diff --git a/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/zylonite-boot.patch b/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/zylonite-boot.patch
new file mode 100644
index 0000000000..f41928eca5
--- /dev/null
+++ b/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/zylonite-boot.patch
@@ -0,0 +1,45 @@
+From 04c42f566c68b757fdadf54e0e0f9dfe9f3f9b06 Mon Sep 17 00:00:00 2001
+From: eric miao <eric.miao@marvell.com>
+Date: Tue, 19 Jun 2007 16:42:53 +0800
+Subject: [PATCH] [PATCH] make zylonite boot
+
+1. reuse head-xscale.S for XSC3
+
+2. add a workaround for machine ID assignment, which should be done
+   by boot loader
+---
+ arch/arm/boot/compressed/Makefile      |    4 ++++
+ arch/arm/boot/compressed/head-xscale.S |    5 +++++
+ 2 files changed, 9 insertions(+)
+
+Index: linux-2.6-pxa3/arch/arm/boot/compressed/Makefile
+===================================================================
+--- linux-2.6-pxa3.orig/arch/arm/boot/compressed/Makefile       2007-09-24 11:25:57.000000000 +0200
++++ linux-2.6-pxa3/arch/arm/boot/compressed/Makefile    2007-09-24 12:26:53.000000000 +0200
+@@ -40,6 +40,10 @@
+ OBJS           += head-xscale.o
+ endif
+ 
++ifeq ($(CONFIG_CPU_XSC3),y)
++OBJS           += head-xscale.o
++endif
++
+ ifeq ($(CONFIG_PXA_SHARPSL),y)
+ OBJS           += head-sharpsl.o
+ endif
+Index: linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S
+===================================================================
+--- linux-2.6-pxa3.orig/arch/arm/boot/compressed/head-xscale.S  2007-09-24 11:42:27.000000000 +0200
++++ linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S       2007-09-24 12:26:02.000000000 +0200
+@@ -33,6 +33,11 @@
+                bic     r0, r0, #0x1000         @ clear Icache
+                mcr     p15, 0, r0, c1, c0, 0
+ 
++#ifdef CONFIG_MACH_ZYLONITE
++               mov     r7, #(MACH_TYPE_ZYLONITE & 0xff)
++               orr     r7, r7, #(MACH_TYPE_ZYLONITE & 0xff00)
++#endif
++
+ #ifdef CONFIG_ARCH_COTULLA_IDP
+                mov     r7, #MACH_TYPE_COTULLA_IDP
+ #endif
diff --git a/meta/packages/linux/linux-rp.inc b/meta/packages/linux/linux-rp.inc
index aa40ee3041..ee9bbfe7f6 100644
--- a/meta/packages/linux/linux-rp.inc
+++ b/meta/packages/linux/linux-rp.inc
@@ -15,7 +15,7 @@ TKSRC = "http://www.informatik.hu-berlin.de/~tkunze/zaurus/patches"
 
 EXTRA_OEMAKE = "OPENZAURUS_RELEASE=-${DISTRO_VERSION}"
 COMPATIBLE_HOST = "(arm|i.86).*-linux"
-COMPATIBLE_MACHINE = '(collie|poodle|c7x0|akita|spitz|tosa|hx2000|qemuarm|qemux86|bootcdx86|htcuniversal)'
+COMPATIBLE_MACHINE = '(collie|poodle|c7x0|akita|spitz|tosa|hx2000|qemuarm|qemux86|bootcdx86|htcuniversal|zylonite)'
 
 KERNEL_CUSTOM_NAME ?= ""
 KERNEL_DEPLOY_NAME ?= "${KERNEL_IMAGETYPE}-${PV}-${KERNEL_CUSTOM_NAME}${MACHINE}-${DATETIME}.bin"
@@ -25,6 +25,7 @@ KERNEL_DEFCONFIG ?= "defconfig-${MACHINE}"
 CMDLINE_CON = "console=ttyS0,115200n8 console=tty1 noinitrd"
 CMDLINE_CON_collie = "console=ttySA0,115200n8 console=tty1 noinitrd"
 CMDLINE_CON_qemuarm = "console=ttyAMA0,115200n8 console=tty1 noinitrd"
+CMDLINE_CON_zylonite = "console=ttyS0,38400"
 CMDLINE_ROOT ?= "root=/dev/mtdblock2 rootfstype=jffs2"
 CMDLINE_ROOT_spitz ?= "root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw"
 #CMDLINE_ROOT_spitz = "root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 rw"
@@ -38,6 +39,7 @@ export mem = '${@bb.data.getVar("COLLIE_MEMORY_SIZE",d,1) or "32"}'
 export rd  = '${@bb.data.getVar("COLLIE_RAMDISK_SIZE",d,1) or "32"}'
 
 CMDLINE_MEM_collie = "mem=${mem}M"
+CMDLINE_MEM_zylonite = "mem=64M"
 CMDLINE_ROTATE_spitz = "fbcon=rotate:1"
 CMDLINE_ROTATE_akita = "fbcon=rotate:1"
 CMDLINE_ROTATE_collie = "fbcon=rotate:1"
diff --git a/meta/packages/linux/linux-rp_2.6.22+2.6.23-rc4.bb b/meta/packages/linux/linux-rp_2.6.22+2.6.23-rc4.bb
index 7f92a2886f..118c2ef72e 100644
--- a/meta/packages/linux/linux-rp_2.6.22+2.6.23-rc4.bb
+++ b/meta/packages/linux/linux-rp_2.6.22+2.6.23-rc4.bb
@@ -4,6 +4,7 @@ PR = "r3"
 
 DEFAULT_PREFERENCE = "-1"
 DEFAULT_PREFERENCE_htcuniversal = "1"
+DEFAULT_PREFERENCE_zylonite = "1"
 
 # Handy URLs
 # git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046
@@ -62,6 +63,7 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.22.tar.bz2 \
            file://defconfig-qemux86 \
            file://defconfig-bootcdx86 \
            file://defconfig-htcuniversal \
+           file://defconfig-zylonite \
            file://defconfig-tosa "
 
 # FIXMEs before made default       
@@ -115,4 +117,10 @@ SRC_URI_append_tosa = "\
 
 SRC_URI_append_htcuniversal ="file://htcuni-acx.patch;patch=1;status=external"
 
+SRC_URI_append_zylonite ="\
+        file://arm_pxa_20070923.patch;patch=1 \
+        file://irq-gpio-offby1.patch;patch=1 \
+        file://zylonite-boot.patch;patch=1 \
+        "
+
 S = "${WORKDIR}/linux-2.6.22"