summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* valgrind: remove arm tests that don't compileDave Lerner2015-06-281-51/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Yocto #7453] Corrects the original commit for the patch that removed ARM ptest CFLAGS settings. Since the flags could be set by a user, the flags should be kept in place during compilation. By keeping the original up-stream CFLAGS for the tests, then additional tests successfully compile for all tested ARM tunings. However, there were still two tests listed below that did not compile for any beaglebone tuning that is valid for valgrind. With the updated patch, the set of excluded ARM ptests and their respective build failures are: intdiv - fails for all beaglebone tunings with 2 errors: {standard input}:(40 or 41): Error: selected processor does not support Thumb mode `udiv r3,r9,r10' {standard input}:(72 or 73): Error: selected processor does not support Thumb mode `sdiv r3,r9,r10' vcvt_fixed_float_VFP - fails for all beaglebone tunings in one of two ways: with neon tuning (-mfpu=neon) fails with Internal Compiler Error without neon tuning fails with 3 errors: {standard input}:33: Error: selected FPU does not support instruction -- `vcvt.f32.s32 s15,s15,#1' {standard input}:58: Error: selected FPU does not support instruction -- `vcvt.f32.s32 s15,s15,#32' {standard input}:136: Error: selected FPU does not support instruction -- `vcvt.f32.u32 s15,s15,#1' After applying this commit, the valgrind ARM ptests compile without errors for tunings: armv7[t][hf][b][-neon] cortexa8[t][hf][-neon] where the tuning [option] was successfully compiled, both with and without the 'option', and in combination with all other options. (From OE-Core rev: 2fb0edcb47a14e47780d545f60885b36e71fca71) (From OE-Core rev: 132886498816f6407416196fd5ccf8d1b8c589ab) Signed-off-by: Dave Lerner <dave.lerner@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libsndfile: Security Advisory - libsndfile - CVE-2014-9496Yue Tao2015-06-283-1/+264
| | | | | | | | | | | | | Backport two commits from libsndfile upstream to fix a segfault and two potential buffer overflows. (From OE-Core rev: 9907e20868397a9823cc1e755ee1b697da6be2f3) (From OE-Core rev: 82b481afc21604603b9c2d6c6b4c428d445cad92) Signed-off-by: Yue Tao <Yue.Tao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* soc-family.inc: Add a default SOC_FAMILY valueRichard Purdie2015-06-281-0/+1
| | | | | | | | | | | | | | | | | | | Otherwise, if MACHINEOVERRIDES is expanded before SOC_FAMILY is set (which may happen as MACHINEOVERRIDES is included in OVERRIDES) we can see: ExpansionError: Failure expanding variable MACHINEOVERRIDES, expression was ${@['', '${SOC_FAMILY}:']['${SOC_FAMILY}' != '']}p1022ds which triggered exception SyntaxError: EOL while scanning string literal (MACHINEOVERRIDES, line 1) To avoid this, give SOC_FAMILY a default empty value so it doesn't get read as None. (From OE-Core rev: dee005b6e1bc353230f9f27a469b2054a644e542) (From OE-Core rev: 7c763846bca4347d6b9e8cc388ad075f00123235) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base: Fix license checksum rebuild problemsRichard Purdie2015-06-281-0/+3
| | | | | | | | | | | | | | | | "MACHINE=qemux86-64 bitbake init-ifupdown; MACHINE=genericx86-64 bitbake init-ifupdown" shows a rebuild when it would be expected. The reason is a LIC_FILES_CHKSUM which contains file://${WORKDIR}, an absolute path which doesn't exist in the first build but does in the second, causing a signature change and a rebuild. Fix the problem by ignoring any file:// url which resolves since TMPDIR for license file dependency purposes. (From OE-Core rev: f27ddf0de23871fc72cfc31f514f0e144aaa2082) (From OE-Core rev: d88bb3759c36f2a30550529468c8a8c511b1661c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oe-selftest: devtool: add a proper test to see if tap devices existPaul Eggleton2015-06-281-0/+10
| | | | | | | | | | | | | Check up front in test_devtool_deploy_target whether the tap devices exist and skip if not. If we don't do this we get a significantly less comprehensible error via pexpect. (From OE-Core master rev: 2258345e19efff7717fe19a5026ec55f1b6f90b6) (From OE-Core rev: cdad3ea375590f6fa9330f481b6712681ad00cd2) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: if workspace layer exists, still ensure it's in bblayers.confPaul Eggleton2015-06-281-14/+22
| | | | | | | | | | | | | | When we run devtool, if the workspace layer already exists but isn't in bblayers.conf (perhaps because it was previously created but subsequently removed from bblayers.conf by the user) then we should add it and notify the user, otherwise devtool operations won't work. (From OE-Core master rev: 313b622a6c6613092ed18a2158e090521344f6c0) (From OE-Core rev: 2904c1130ea7cc1abde0609f1ba1394e0f31a6fa) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: fix build env command execution error handlingPaul Eggleton2015-06-282-7/+24
| | | | | | | | | | | | | | | | | If we execute an external command, we ought to prepare for the possibility that it can fail and handle the failure appropriately. We can especially expect this to happen when running bitbake in this scenario. Ensure we return the appropriate exit code to the calling process. Fixes [YOCTO #7757]. (From OE-Core master rev: 98a716d79bfc5434a5b42d3ca683eab3eea30a41) (From OE-Core rev: 2791fe9236f7173e6b998cf9b40fe238566ed8ee) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipetool: ensure git clone is standalone when extractingPaul Eggleton2015-06-283-6/+15
| | | | | | | | | | | | | | | If -x is specified and the specified URI was a git repository, we need to ensure that the resulting clone is a sandalone and not one that has pointers into the temporary fetch location or DL_DIR (since the git fetcher does a local clone with -s). Split out the code from devtool that already does this for "devtool modify -x" and reuse that. (From OE-Core master rev: fc47e8652ef32e7399f57c80593df90dc52d8b84) (From OE-Core rev: d8f151b6a385f81abead65624ba15d42cbd90e11) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipetool: avoid second-level subdir when extractingPaul Eggleton2015-06-281-6/+7
| | | | | | | | | | | | | | When -x was specified, we were getting the normal unpack subdirectory which we don't really want - if there's only one subdirectory unpacked then we should effectively copy just it to the extraction path, not as a subdirectory under it. (From OE-Core master rev: 0eeecce96a0aa757c2c4c4ac4d82e3bcbf0f982c) (From OE-Core rev: 3378c932570ba2301cd02103225fcf7629de656f) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: update-recipe: check if source tree is a git repositoryPaul Eggleton2015-06-281-5/+11
| | | | | | | | | | | | | If you've done "devtool add" (or "devtool modify" without -x) then it's possible that the external source tree is not a git repository, so we should handle that case here instead of printing a traceback. (From OE-Core master rev: eb2147aa8facd4ef33a0749e9ae660ec686dad48) (From OE-Core rev: c5dc3e819c1bb224e3cb667381faa5abf1888362) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: update-recipe: handle unversioned bbappendsPaul Eggleton2015-06-281-7/+7
| | | | | | | | | | | | | | Use the proper bbappend file name, don't just assume it will have a version suffix (because it won't if the original recipe doesn't). Fixes [YOCTO #7651]. (From OE-Core master rev: 3332d68ef7b2a300ce8dcf5021497d98e5b17baa) (From OE-Core rev: 3d5ea16a1f53c12d86c4e8df6af864964541cf02) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: add: use correct bbappend file name with -V optionPaul Eggleton2015-06-282-3/+3
| | | | | | | | | | | | | | | | | We weren't adding the version into the bbappend file name when -V was specified which meant that building or resetting failed. Also adjust one of the tests so that we're testing devtool add both with and without this option. Fixes [YOCTO #7647]. (From OE-Core master rev: bdbeff0cd342e31053d7203d78fc5dda611052b1) (From OE-Core rev: 0b9e8817fc8ba375a1045a66d04b3fd2b498427b) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: handle . in recipe namePaul Eggleton2015-06-282-3/+3
| | | | | | | | | | | | | | Names such as glib-2.0 are valid (and used) recipe names, so we need to support them. Fixes [YOCTO #7643]. (From OE-Core master rev: b9fd8d4d4dfae72de2e81e9b14de072e12cecdcf) (From OE-Core rev: 36df1bb9bb3c92d096118b74fdf11a243be3f7d5) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: include bbappends in recipe parsingMarkus Lehtonen2015-06-282-16/+25
| | | | | | | | | | | | | In order to get correct metadata, SRCREV for example. Fixes [YOCTO #7648]. (From OE-Core master rev: 8b1794559dd7fd956716179d628e61cffdce1686) (From OE-Core rev: becbd5d50a091fe4a980361d9c99efa01f43edcc) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: modify: implement --no-same-dirMarkus Lehtonen2015-06-281-2/+7
| | | | | | | | | | | | | This option can be used to have a separate build directory, in order to keep the srctree directory clean for packages that do not need to be built in the source directory. (From OE-Core master rev: 5cc348c0a3016e4ccc1e80d099e2e197b3b38bd2) (From OE-Core rev: a7316a4c564901b30af740ece6631a6f68355bb4) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: modify: use B=S if that is the default for the recipeMarkus Lehtonen2015-06-281-5/+12
| | | | | | | | | | | | | | | | | Makes the build succeed for packages which do not support separate build directory, e.g. zlib. The same outcome could be achieved with the --same-dir option, but, it's generally hard to tell if a random package would need that option. The negative side effect of this patch is that dev srctree (of some packages that build fine without this modification) gets dirtied by build artefacts. (From OE-Core master rev: 6ac5692426956e276ba2119f917b0f30791e6cd6) (From OE-Core rev: 97078c56e8b8a235e923d964253775e20112a36f) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Acked-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: call parse_recipe with correct argumentsMarkus Lehtonen2015-06-281-2/+3
| | | | | | | | | | | | | | Give the correct data object ("config data" instead of "recipe data") as an argument to oe.recipeutils.patch_recipe() Fixes [YOCTO #7595] (From OE-Core master rev: 7d2b918019b0afe215a6489dad697afac34f73e9) (From OE-Core rev: f8427fe565e44e46246146bdaae66a5d83ae8c9d) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rsync: backport a patch to fix CVE-2014-8242Roy Li2015-06-282-0/+102
| | | | | | | | | | (From OE-Core rev: 81d06ef0a566793e644686ec604ad7d46546d2b0) (From OE-Core rev: 2ebf9ad9791e4b38465bfc456aac1d6009078d82) Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* glibc: Fix __memcpy_chk on non-SSE2 CPUsAndre McCurdy2015-06-282-0/+37
| | | | | | | | | | | | | | | | | | Backport from upstream glibc: https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=132a1328eccd20621b77f7810eebbeec0a1af187 Note that the fix is only required when glibc is built for i686/multiarch, so is not applicable in the default oe-core x86 configuration (which builds glibc for i586 and therefore does not include SSE2 optimised memcpy etc). (From OE-Core rev: e643b9bc4c459ea8b59573cf67f2494388e7a377) (From OE-Core rev: 38b0095c3a3416725ef5f19ab940e84f45a8a01a) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* squashfs-tools: build and install unsquashfs as wellMartin Jansa2015-06-281-1/+2
| | | | | | | | | | | | * it's useful for debugging corrupt squashfs images from mksquashfs (From OE-Core rev: af3c9bbf2db5a712f63145697d045d2f1ddce271) (From OE-Core rev: 07961604732405c14a292cc963006f48a4a82bfd) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lttng-modules: Update to stable version 2.6.1Saul Wold2015-06-282-14/+19
| | | | | | | | | | | | | | | | This fixes a build issue with the 3.19.5 kernel where the regmap prototypes have changed. The patch is rebased do to changes in the new version of the Makefile. [YOCTO #7737] (From OE-Core rev: 787fde133c6b50c5df6ce8f90b2906b7955b41e4) (From OE-Core rev: 2a355d2efb44a70571586bc5f6e500fa5d73db33) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3: fix build for shared objectRobert Yang2015-06-281-0/+1
| | | | | | | | | | | | | | Fixed when build on armv7a_vfp_neon: Python-3.3.3/Modules/_struct.o: relocation R_ARM_MOVW_ABS_NC against `a local symbol' can not be used when making a shared object; recompile with -fPIC All the archs should use -fPIC when build shared object for linux. (From OE-Core rev: 60c1f76f65060cbea458b06f9719a2536f50474e) (From OE-Core rev: d9c3d3036da6f36d1f494987aa854d0c76968a27) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grep: fix CVE-2015-1345Kai Kang2015-06-282-1/+157
| | | | | | | | | | | | | | | | Backport patch to fix CVE-2015-1345. The issue was introduced with v2.18-90-g73893ff, and version 2.5.1a is not affected. Replace tab with spaces in SRC_URI as well. (From OE-Core rev: ea97b1dee834594358c342515720559ad5d56f33) (From OE-Core rev: f5e18f8dbac54231441b8b6260bf608edc377f66) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gpgme: fix CVE-2014-3564Kai Kang2015-06-282-1/+59
| | | | | | | | | | | | | | | Backport patch to fix CVE-2014-3564. http://git.gnupg.org/cgi-bin/gitweb.cgi?p=gpgme.git;a=commit;h=2cbd76f (From OE-Core rev: 421e21b08a6a32db88aaf46033ca503a99e49b74) (From OE-Core rev: 204f24855a00f595ddfa040ae149b4184721603f) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ppp: Security Advisory - CVE-2015-3310Roy Li2015-06-282-0/+30
| | | | | | | | | | | | | | | | | | | | http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2015-3310 Buffer overflow in the rc_mksid function in plugins/radius/util.c in Paul's PPP Package (ppp) 2.4.6 and earlier, when the PID for pppd is greater than 65535, allows remote attackers to cause a denial of service (crash) via a start accounting message to the RADIUS server. oe-core is using ppp 2.4.7, and this CVE say ppp 2.4.7 was not effected, but I found this buggy codes are same between 2.4.6 and 2.4.7, and 2.4.7 should have this issue. (From OE-Core rev: 5b549c6d73e91fdbd0b618a752d618deb1449ef9) (From OE-Core rev: 5450caccd45a2ee35ee227cdd64e66a304909a0e) Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemu: fix CVE-2015-3456Kai Kang2015-06-282-0/+93
| | | | | | | | | | | | | | | | | Backport patch to fix qemuc CVE issue CVE-2015-3456. Refs: https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2015-3456 http://git.qemu.org/?p=qemu.git;a=commit;h=e907746266721f305d67bc0718795fedee2e824c (From OE-Core rev: 1d9e6ef173bea8181fabc6abf0dbb53990b15fd8) (From OE-Core rev: eec51579ee7a99e3ac2527ecb6ee57b494a7992f) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: drop the padlock_conf.patchRoy Li2015-06-282-32/+0
| | | | | | | | | | | | | | padlock_conf.patch will enable the padlock engine by default, but this engine does not work on some 32bit machine, and lead to openssl unable to work (From OE-Core rev: f7d186abca6ed9b48ae7393b8f244e1bfb46cb41) (From OE-Core rev: bbc41bc086009726f307edeedbd380c68b1be6a7) Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gnutls: remove --with-libz-prefix configure optionAndre McCurdy2015-06-281-1/+0
| | | | | | | | | | | | | | | | The default search path in sysroot is sufficient to find zlib, so the --with-libz-prefix configure option seems to be unnecessary. For target builds, relying on sysroot also prevents an absolute path from being hardcoded in the gnutls.pc pkg-config file. (From OE-Core rev: 7a800bfeb6c8c83ee7cc74739f496982cd71c8e8) (From OE-Core rev: f46c2ac0fd05f0e10258d8f03bfb2ebd0c2bcbe3) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* toolchain-scripts.bbclass: fix quoting for CCACHE_PATHAndre McCurdy2015-06-281-1/+1
| | | | | | | | | | | | Single quotes prevent expansion of $sdkpathnative$bindir. (From OE-Core rev: 986e5f37f3450077c843777c22df6b2d0f9502c5) (From OE-Core rev: cd80d52fd213b15670d45f761538424180840f7d) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs.py: Make set -x not break rootfs creationPeter Seebach2015-06-281-0/+3
| | | | | | | | | | | | | | | | | | The rootfs logfile check errors out if it finds an "exit 1" in a log. But consider the shell idiom: if ! $command; then exit 1; fi and consider a postinstall script with a "set -x" for debugging purposes (to get log output in /var/log/postinstall.log.) Solution: Ignore lines prefixed with a +, because those show shell code even if a specific fragment won't be executed. (From OE-Core rev: f23f129dba66144abf8fe8450320e01fa4c02f5c) (From OE-Core rev: a13185ba4a29fca319b4eb4a76fdbdfcfe767322) Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: import subprocess in correct functionJussi Kukkonen2015-06-281-2/+2
| | | | | | | | | | | | | check_sanity() no longer needs the subprocess module but sanity_handle_abichanges() does use subprocess.call(). (From OE-Core rev: 469b53fb3bb94c7e5e9fb53d07cec2292b13c87d) (From OE-Core rev: f0bf36c669790f1bcb2f897e61c82b075cb0a83b) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gtk-engines: Make gtk-engines-dev installable by dropping dependency to not ↵Florian Boor2015-06-281-0/+2
| | | | | | | | | | | generated gtk-engines package. (From OE-Core rev: da96efe73c2338fa660a80d043479106f732f1f5) (From OE-Core rev: 659cc47b142e0f14ace989d10277e4f83d7ffb75) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs.py: Improve rpm log_check_regexEd Bartosh2015-06-281-1/+3
| | | | | | | | | | | | | | | | | | | Current regex can cause false negatives if paths in bitbake log files contain "ERR" or "Fail". do_rootfs fails with return code 1 in this case. Improved regexp is based on error messages produced by rpm. Those are found by analyzing rpm source code. [YOCTO #7789] (From OE-Core rev: 38871dc0295fb2516e1c8b1dc9948c2d2fc4d2cd) (From OE-Core rev: 4a7f15e1d64a5d4ca4cd9b46a0ee5903e441b4e0) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* zlib: clean up base_libdir symlinkRoss Burton2015-06-281-6/+4
| | | | | | | | | | | | | libz.so symbolic link created in ${libdir} is ../../${base_libdir}/libz.so.1.2.8. This doesn't work if base_libdir or libdir is changed, so use oe.path.relative to construct the correct path at build time. (From OE-Core rev: ada8972ec40441b06e50d3e9ccbc07241a48e30a) (From OE-Core rev: 20a60f137a9a1ae2689286241cc3d68a0392803d) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* icu-native: fix hard paths in native icuAndré Draszik2015-06-281-0/+1
| | | | | | | | | | | | | | | | | | | | The icu recipe installs icu-native twice, once in the usual location, and once for cross builds into the path given by --with-cross-build. This latter path is not included in the list of paths recognised by chrpath.bbclass, hence the binaries in there retain the rpath as used during compilation. This causes the package to not be relocateable from sstate [YOCTO #6851] We use the infrastructure that is in place already, and simply set PREPROCESS_RELOCATE_DIRS as necessary, and things start to work. (From OE-Core rev: e7fcaa534511e3f65b630b01cf0c824ee5a5fd4d) (From OE-Core rev: 922faf8ed42cd2d105e30a8c92836664d6b5bb18) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pcmciautils: fix the parallel building issueRoy Li2015-06-283-42/+46
| | | | | | | | | | | | The building failure still display after upstream commit 055a5bbfc[ pcmciautils: fix for parallel build], so refix it. (From OE-Core rev: fb426a1f5a103a1dc096977533dfbec2aefe07ae) (From OE-Core rev: 14b5556ad3a4d7e817442e004b73601041f31b69) Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* glibc: CVE-2015-1781: resolv/nss_dns/dns-host.c buffer overflowHaris Okanovic2015-06-282-0/+47
| | | | | | | | | | | | | | | | | | | | | Backport Arjun Shankar's patch for CVE-2015-1781: A buffer overflow flaw was found in the way glibc's gethostbyname_r() and other related functions computed the size of a buffer when passed a misaligned buffer as input. An attacker able to make an application call any of these functions with a misaligned buffer could use this flaw to crash the application or, potentially, execute arbitrary code with the permissions of the user running the application. https://sourceware.org/bugzilla/show_bug.cgi?id=18287 (From OE-Core rev: c0f0b6e6ef1edc0a9f9e1ceffb1cdbbef2e409c6) (From OE-Core rev: 54f5e2001249c117cdfc1c26631ba50bc7a155dd) Signed-off-by: Haris Okanovic <haris.okanovic@ni.com> Reviewed-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* native.bbclass: avoid unintended substring replacement when setting PROVIDESMario Domenech Goulart2015-06-281-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The way native_virtclass_handler was implemented leaded to unintended substring replacements when setting PROVIDES for native providers, in case the original PROVIDES value contains providees with common substrings. Here's a practical case where the old behavior was problematic: the oracle-jse-jdk-x86-64 recipe provides both virtual/java and virtual/javac: Before: $ bitbake -e oracle-jse-jdk-x86-64-native | grep ^PROVIDES= PROVIDES="oracle-jse-jdk-x86-64-native virtual/java-native virtual/java-nativec" After: $ bitbake -e oracle-jse-jdk-x86-64-native | grep ^PROVIDES= PROVIDES="oracle-jse-jdk-x86-64-native virtual/java-native virtual/javac-native" Change-Id: I8186992dae58e37c2a2364586360ff9b7da9198f (From OE-Core rev: c28291f1fb07fbc80275d9bceefed642c963e204) (From OE-Core rev: e0814f2306e1404fffafc7695862c6ee542b08fa) Signed-off-by: Mario Domenech Goulart <mario@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-plugins-bad: Move EGL requirement for WaylandOtavio Salvador2015-06-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | The EGL is used by the Wayland backend. When building using Software Rendering and without Wayland support the EGL backend is not available so we should not require EGL for GLES2 support. This fixes following build error: ,---- | ... | checking for bcm_host_init in -lbcm_host... no | checking for WAYLAND_EGL... no | configure: error: Could not find the required EGL libraries | Configure failed. The contents of all config.log files follows to aid debugging | ERROR: oe_runconf failed `---- (From OE-Core rev: 9c3a94aea1de3ab98e5693640926bfc86acde2db) (From OE-Core rev: 2a0a2f276ef631bf7d60ec9821800d9b40a5832b) Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* boost: properly fix do_boostconfig re-executionMartin Jansa2015-06-281-6/+4
| | | | | | | | | | | | | | | | | | | | * it was partially fixed in: commit 291e20a51544c640d07767d1dc32d762f4370f41 Author: Venkata ramana gollamudi <ramana.gollamudi@huawei.com> Date: Fri Apr 13 11:42:46 2012 +0000 Subject: boost: fix re-execution of task but with disadvantage that when CXX or *FLAGS variables were changed it was continuing to use old values * just remove the line before appending it with current values to fix that (From OE-Core rev: 8ce9584a78079b3db88eabfa902025a94443378d) (From OE-Core rev: f055d084ad74a01a431ea87ead6bfdcaca0d7bde) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd: removing workaround odering journal after remote-fs.targetBruno Bottazzini2015-06-281-3/+0
| | | | | | | | | | | | This workaround is not needed in version 219 since the fix is upstreamed with: 919699ec301ea507edce4a619141ed22e789ac0d (From OE-Core rev: e3330d0602fb3ad347f028063d25f634a36ea344) (From OE-Core rev: fdcbbb50a9946733bd204b8db45606c929e43822) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ncurses: inherit pkgconfigChristophe Guillon2015-06-281-1/+1
| | | | | | | | | | | | | Without pkgconfig being present at build time it's possible for the .pc files to not be installed correctly. (From OE-Core rev: f049a53078b3876be9fefc1e5f64404a3f378724) (From OE-Core rev: c6e39f271a737aa867a15f70c2975987e9d7b209) Signed-off-by: Christophe Guillon <christophe.guillon@st.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* e2fsprogs: install populate-extfs.shMartin Jansa2015-06-281-0/+2
| | | | | | | | | | | | | | | | * install populate-extfs.sh from contrib, be aware that in order to use it you need to set DEBUGFS shell variable, otherwise it will try to use debugfs from relative path which is almost always incorrect: CONTRIB_DIR=$(dirname $(readlink -f $0)) DEBUGFS="$CONTRIB_DIR/../debugfs/debugfs" (From OE-Core rev: 525b7b587a00466e4322450c171d920b47201e56) (From OE-Core rev: 32e847f6988eb488dad23badf1cabae92ef803df) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mesa: fix do_install_appendRobert Yang2015-06-282-2/+2
| | | | | | | | | | | | | "ifdef MESA_EGL_NO_X11_HEADERS" -> "if defined(MESA_EGL_NO_X11_HEADERS)" (From OE-Core master rev: 3a464d67b60f70b865f7db768e7edc53e40ff450) (From OE-Core rev: 12e467f436fbc22f274558c753f0ac9756ce1071) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* glibc: Fix x32 make raceRichard Purdie2015-06-282-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On x32 builds, sysd-syscalls appears malformed since the make-target-directory appears on the wrong line. This causes races during the build process where you can see failures like: Assembler messages: Fatal error: can't create [...]glibc/2.21-r0/build-x86_64-poky-linux-gnux32/time/gettimeofday.os: No such file or directory Assembler messages: Fatal error: can't create [...]glibc/2.21-r0/build-x86_64-poky-linux-gnux32/time/time.os: No such file or directory The issue is that the carriage return is being escaped when it should not be. The change to sysd-syscalls with this change: before: """ $(foreach p,$(sysd-rules-targets),$(objpfx)$(patsubst %,$p,time).os): \ $(..)sysdeps/unix/make-syscalls.sh $(make-target-directory) (echo '#include <dl-vdso.h>'; """ after: """ $(foreach p,$(sysd-rules-targets),$(objpfx)$(patsubst %,$p,time).os): \ $(..)sysdeps/unix/make-syscalls.sh $(make-target-directory) (echo '#include <dl-vdso.h>'; """ which ensures the target directory is correctly created. Only x32 uses the vdso code which contains the bug which is why the error only really appears on x32. (From OE-Core rev: ae4729ed6c5e5443c42f8825dd85873f06a3570e) (From OE-Core rev: c945453a8453dd6dab5aa5a132bea20e73ae4d6d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base: Avoid find raceRichard Purdie2015-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In a similar way to http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=aa1438b56f30515f9c31b306decef7f562dda81f and http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=527b28c10955daf0387597020d69593ce24bcaa4 there is a find race in base.bbclass. For recipes with PACKAGES_remove = "${PN}", the find which removes .la files can race against deletion of other directories in WORKDIR e.g.: find: '/home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/sstate-build-populate_lic': No such file or directory | WARNING: /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/temp/run.do_configure.6558:1 exit 1 from | find /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7 -name \*.la -delete Fix the race in the same way. [YOCTO #7522] (From OE-Core rev: 90861b8908d254154f4d1d613471070df8013da8) (From OE-Core rev: 220141c63161f7c4f4112ac8b95bf44775843a9f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* alsa-tools: set CLEANBROKENRobert Yang2015-06-281-0/+2
| | | | | | | | | | | | | | | | | Fixed: make[1]: Entering directory `alsa-tools-1.0.28/envy24control' make[1]: *** No rule to make target `clean'. Stop. There is no "make clean" in envy24control when DISTRO_FEATURES is changed from no-x11 to x11. (From OE-Core rev: 8ccc47c37765487b535c4d6a8b43c2b6365ff000) (From OE-Core rev: 4ff4bca025277fd19f11a6ba86102fca8563a1ff) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* unzip: Security Advisory -CVE-2014-9636 and CVE-2015-1315Roy Li2015-06-283-1/+451
| | | | | | | | | | | | | | | | | | | | | | | | http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-9636 unzip 6.0 allows remote attackers to cause a denial of service (out-of-bounds read or write and crash) via an extra field with an uncompressed size smaller than the compressed field size in a zip archive that advertises STORED method compression. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2015-1315 Buffer overflow in the charset_to_intern function in unix/unix.c in Info-Zip UnZip 6.10b allows remote attackers to execute arbitrary code via a crafted string, as demonstrated by converting a string from CP866 to UTF-8. (From OE-Core rev: f86a178fd7036541a45bf31a46bddf634c133802) (From OE-Core rev: d868f9e8a6a5d4dc9c38e2881a329f7e3210eab8) Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: propagate in tree defconfigs to WORKDIRBruce Ashfield2015-06-281-5/+6
| | | | | | | | | | | | | | | | | | | As reported by Steffen Pankratz <Steffen.Pankratz@elektrobit.com>, the previous logic of KBUILD_DEFCONFIG processing would not propagate an in tree defcofig to WORKDIR if one was not already present. We fix the propagation by copying the in tee config if a defconfig is not already in WORKDIR. Additionally we only warn (versus copying) if an in tree configuration is specified, is different than the WORKDIR version and isn't copied. (From OE-Core rev: 58cc903a5156063b24e48011438a709cb6e09f54) (From OE-Core rev: 0b12cc3a326740bd95bb199d4f1b38bf5beadfa9) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: fix race between checkout and meta data generationBruce Ashfield2015-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | There are two tasks that must run before a linux-yocto kernel is built. - Kernel checkout and relocation to work-shared (kernel_checkout) - Meta data gathering and configuration prep (kernel_metadata) The current task definitions for both are simply "before do_patch", which is correct, but kernel_checkout must run before and not race with kernel_metadata. So we set the definition of kernel_checkout to be more specific and enforce the proper ordering. [YOCTO: #7731] (From OE-Core rev: 9d806f3d05de918952f839f5e595cb71cd1261db) (From OE-Core rev: 561b7776d93d40cac009360ec95b8de78888f1ca) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-06 11:13:15 +0000