| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add latest available firmware binaries for RTL8192CX chipsets.
These new firmwares have been released in 2012, have been used
by the mainline kernel as preferred firmware since 3.13 and
even backported to stable branches.
(master rev: 2dc67b53d1b7c056bbbff2f90ad16ed214b57609)
(From OE-Core rev: 3671e20cb31f0a5c11939f3c5ba2d088db08e705)
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After running gummiboot loader install option, the installed target
storage device boot parameter for root=PARTUUID is empty causing boot failure.
This issue is only observed with gummiboot and not with GRUB loader.
This fix assign the rootuuid of the rootfs partition for gummiboot loader.
[YOCTO #8709]
(From OE-Core rev: 0b9f31452a65d1a8d8392b4ba9c335bd32860a6a)
Signed-off-by: Ng, Mei Yeen <mei.yeen.ng@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Running the install option from bootloader to install image to eMMC will fail
with error:
Formatting /dev/mmcblk01 to vfat...
mkfs.fat 3.0.28 (2015-05-16)
/dev/mmcblk01: No such file or directory
This issue impacts both grub and gummiboot install option to eMMC device.
The installation failure is due to the following:
[1] Unable to partition eMMC as the partition prefix 'p' is not appended
The condition checking failed with the additional /dev/ appended with
the target device name.
[2] The partition uuid for boot, root and swap partition is not captured
for eMMC
This fix updated the condition checking and changed the variables to
reference the boot, root and swap partitions for UUID.
[YOCTO #8710]
(master rev: a7d081c3db776c8b0734942df6bf96f811f15bd3)
(From OE-Core rev: 1be316beb5c2b1e32f11ab8ec5dee68f64defb2d)
Signed-off-by: Ng, Mei Yeen <mei.yeen.ng@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On systems with two cards, the correct output profile does not get
selected automatically even in the simple case where there is one
available profile. This scenario is typical at least with HDMI audio
(which is on a separate card).
Fixes [YOCTO #8448]
(From OE-Core rev: 7d26b5f7fad5f5200f73e2a2c11874d8ccf34c59)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
TARGET_CPPFLAGS, TARGET_CFLAGS, TARGET_CPPFLAGS and TARGET_LDFLAGS may
differ between MACHINEs. Since they are exported they affect task hashes
even if unused which leads to multiple variants of allarch packages
existing in sstate and bouncing in the sysroot when switching between
MACHINEs.
allarch packages shouldn't be using these variables anyway, so let's
ensure they have a fixed value in order to avoid this problem.
(Compare with 05a70ac30b37cab0952f1b9df501993a9dec70da and
14f4d016fef9d660da1e7e91aec4a0e807de59ab.)
(From OE-Core rev: 16482cf042e129e8f429bdcea9c0c9addb0e8a0b)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix divide by zero bug (CVE-2014-9756)
(From OE-Core master rev: f47cf07ab9d00ed7eddc8e867138481f7bd2bb7d)
(From OE-Core rev: 353f6d9530e9545aee5c77de348abeee9002f046)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a is being give a High rating so please consider it for
all 1.1.28 versions.
A type confusion error within the libxslt "xsltStylePreCompute()"
function in preproc.c can lead to a DoS. Confirmed in version 1.1.28,
other versions may also be affected.
(From OE-Core master rev: 0f89bbab6588a1171259801fa879516740030acb)
(From OE-Core rev: bc8b7401fa18f6a987041d7f93a1fa3512f8513c)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(From OE-Core rev: e3d2974348bd830ec2fcf84ea08cbf38abbc0327)
(master rev: 78e05984b1ac48b1f25547ccd9740611cd5890a9)
(From OE-Core rev: 97b247a88024083ce145f9e64ac9c9a182d02d3e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To help automated scanning of CVEs, put the CVE ID in the filename.
(From OE-Core master rev: 211bce4f23230c7898cccdb73b582420f830f977)
(From OE-Core rev: 6821bb42febfc5f939896b0ffbc1c00b15b9329e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is a CVE fix, so rename it to help CVE detection tools identify it as
such.
(From OE-Core master rev: 3fd05ce1f709cbbd8fdeb1dbfdffbd39922eca6e)
(From OE-Core rev: 2cc8c8066193f851ea0ed3912dee287c2d1c5257)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The structure has apparently changed, and there was a missing
setting. This corrects a segfault when disassembling code.
(From OE-Core master rev: 2e8f1ffe3a8d7740b0ac68eefbba3fe28f7ba6d4)
(From OE-Core rev: 6a6f5446303a9b0b858d153137244a5a101520ce)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
(From OE-Core master rev: 8e53500a7c05204fc63759f456639545a022e82b)
(From OE-Core rev: 71ad09cfe9c43a113295c95a0fb0899d44f2bb7e)
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
| |
(From OE-Core rev: e44ed8c18e395b9c055aefee113b90708e8a8a2f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Added Ubuntu 15.10.
(From meta-yocto rev: 08ccca7559e2b74094f7335746a8cbec892d450d)
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Added poky 2.0 and Fedora 22.
(From meta-yocto rev: 76d3570b011c71d9d5e00e05ba17afecc7819cb4)
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
| |
(From OE-Core rev: 49fdc7e3bcb0f15b89db6ac653a861a5a55c8d14)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CVE-2015-7696: Fixes a heap overflow triggered by unzipping a file with password
CVE-2015-7697: Fixes a denial of service with a file that never finishes unzipping
References:
http://www.openwall.com/lists/oss-security/2015/10/11/5
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7696
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7697
(From OE-Core rev: a11b23a7d2a29414a4ea47c411f09a68b1b28e2d)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Backport a fix from upstream to fix a denial of service via a malicious escape
sequence.
[YOCTO #8617]
(From OE-Core rev: d5065e2b1c49fa65627f0adec8e42190ebccb572)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
| |
(From OE-Core rev: d3aa328147e364f88791564920cfb933f9aa2b20)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
This update matches the kernel update made to oe-core linux-yocto
and address some graphics issues.
(From meta-yocto rev: afe024cd4a97bb32bf8296a85b403669ca41f634)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The fix consist of allowing 64bit atomic ops for x86.
This should be safe for i586 and newer CPUs.
It also makes the synchronization more efficient.
[YOCTO #8140]
(From OE-Core rev: 2b8c7aa51f6ac7f79c4834e04b697c04afc8beaf)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Due to problems with the prelinker itself, we need to disable the
image-prelink by default. This will hopefully be re-enabled in the near
future.
(From meta-yocto rev: 51f83d2ee593c3936138aa50c06b0bfe9c6b9162)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
Added an exception and link to a patch the user should use if they
are using GCC 5 for specific ARM machine.
(From yocto-docs rev: 4f43b683cf4a078c6df4b8c6be59e6fb8702d265)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
opkg 0.3.0 requires also libarchive.
[YOCTO#8308]
(From yocto-docs rev: 9bf99020ab993ec497134921dd3e22414e65de95)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes [YOCTO #7474]
There was not a strong tie between .config file discussions
for the kernel between corresponding menuconfig sections in
the kernel-dev and dev-manual manuals. I added a cross-
reference link in the kernel-dev manual to help tie this
information together.
(From yocto-docs rev: bbeb7b0f48be6c2bdb6c6031ce0476d6d2081f94)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Some minor rewordings
(From yocto-docs rev: c62d39ad684c6be3321d711bd7935799e4269fa3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rather than relying on bug 8411, which is conveniently creating
separate log files for each of our builds, create our own
log file for each build.
The log files are created in the same tmp directories that
bitbake users, but are timestamped to the millisecond to avoid
name collisions.
Each log file is opened on a ParseStarted event (for builds
triggered by Toaster) or BuildStarted event (for builds on the
command line: Toaster doesn't get the ParseStarted event
for command-line builds).
The log file is closed on the BuildCompleted event, or if the
build fails.
Because we start logging on ParseStarted for Toaster builds,
we're able to capture the "Build Configuration" section which
bitbake writes to output.
[YOCTO #8373]
(Bitbake rev: 7974203cd8bc66dff1fcc55f8723dedefaf72840)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similarly to BB_TASK_NICE_LEVEL, add BB_TASK_IONICE_LEVEL which allows the ioprio
of tasks to be adjusted. This is in response to various qemu runtime timeouts
which have been witnessed on the autobuilder, seemingly due to IO starvation (we
already use NICE_LEVEL to adjust tasks). This has a fairly urgent need to deal
with certain 'random' failures we're seeing on the autobuilders in testing.
The format of the data in the variable is BB_TASK_IONICE_LEVEL = "<class>.<prio>".
For <class>, 2 is best effort (the default), 1 is real time and 3 is idle. You'd
need superuser privileges to use realtime. The <prio> value is a default of 4,
and can be set between 0 and 7 with 7 being lowest priority and 0 the highest.
The user can set this freely with normal privileges
Note that in order for this to take effect, you need the cfq scheduler selected
for the backing block device.
We could use nice wrapper functions for ioprio from modules like psutil however
that would complicate bitbake dependencies. This version has some magic numbers
but works on the main 32 and 64 bit x86 build architectures and can easily be
extended if ever needed. When we move to python 3.x, we can likely replace this
with standard calls.
(Bitbake rev: b9471ad147b102c45d65f5ffd9521864df7ff9c1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
The console log data is written to is created at console initialisation
time and does not change over reset events. This ensures the
BB_CONSOLELOG value is correct over such resets by preserving it.
(Bitbake rev: 335eb2db228f7543a49de71f063ac72b865c947a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Metadata can define BB_CONSOLELOG as containing ${DATETIME} and
this can get expanded to a different value each time the variable
is read. In the case of BB_CONSOLELOG, this behaviour is not
desireable.
The values of DATE/TIME are locked down at build time but this is too
late for the purposes of ensuring the system can figure out the real
value of BB_CONSOLELOG.
The best way to do this is to set the variable into the datastore, thereby
preserving its value.
[YOCTO #8411]
(Bitbake rev: 021f2eb55ab5863b57ed1b3f19f1b329bc1ad477)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
There are some use cases where we want to read a variable but also
set the variable to the value read, effectively locking in any
expansion of it. This adds such a command.
(Bitbake rev: 0c0c524691e3d2ffd9953a106fcc06262cbde910)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Added a new variable description here for this variable.
(Bitbake rev: 4e0da1ef4a58a7ba4b92d4e07ef79cf7bd90abf0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
| |
(Bitbake rev: 0f0c205b9d6c24bee334eabb359973e0368ce931)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Our title tags are all over the place, and have no relation to the page
content. This commit adds a meaningful title tag to each Toaster page.
(Bitbake rev: 1ab8827d684a19a70f3b788aed2327bf30edffe2)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch removes errornous extra path-specs from cpan_build.bbclass
because corrected path specs at build time are enough.
* fixes wrong path used when building using Module::Build toolchain
(From OE-Core rev: bb59eb410c716057190fb0d115ef85b2c12e6518)
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch corrects the path specifications when building perl
for vendorlib, vendorarch, sitelib and sitearch to allow newer
dual-life module being installed on host to satisfy configure
and build requirements of some CPAN distributions.
Additionally, fix search path order in perl wrappers.
(From OE-Core rev: ca5d96b1cf406897728f6f6bae6e0ab4e35a469a)
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes some issues in classes providing cpan module build support:
* add support even for xs modules with more than 3 levels as
B::Hooks::End::Of::Scope or Math::Random::ISAAC::XS
* correct handling of Module::Build (as far as stolen from pkgsrc
and my humble knowledge)
* configure to install to vendor_libs as default, even when
inherited do_install remains unused (overwritten do_install)
(From OE-Core rev: 6948d2bd35cda57f520f0180a6bb43cc70262f41)
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
oe-core commit: 24b80d211f3808a0ffebee426932f11b8d4d46e0 sets
sbindir = "${bindir}" in the nativesdk class.
So, update the location of unfsd binary from "/usr/sbin" to "/usr/bin" in
runqemu-export-rootfs. Also update unfs3-native to install unfsd under
"bin" directory so the binary is always in the same location.
[YOCTO #8315]
(From OE-Core rev: 2e98b80a3a11798145f58c8ccc8b873cd713f4f2)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
The intercept runs against the native sysroot so we need to pass it
the native libdir instead of the target libdir, as otherwise it will
use target paths (such as lib64) in the native sysroot.
(From OE-Core rev: 0fe84007176c98644b1917966c98501beb7e0ce2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
wired-setup script should not be in ${libdir} as it's not arch
dependent.
This also fixes (or works around) a practical issue where a multilib
build installs the wrong version of connman-conf and then connman
can't find the script.
[YOCTO #8550]
(From OE-Core rev: 38a6ecf0070a60eb14b353b158b70ddc919ad328)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Before, the users and groups specified in the passwd file and the
groups file had to have trailing colons to make sure there were enough
elements in the definitions, or bitbake would throw a Python
exception. After this change one can omit the trailing colons, which
especially simplifies passwd files used only to specify static UIDs.
(From OE-Core rev: 7754e0f71eb794f0e06a1b005e3824fac4cdac6c)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Applied review changes from Belen.
(From yocto-docs rev: 1b9a8c1ee031d0633a0ace930d014399a09e7172)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Applied review comments from Paul Eggleton.
(From yocto-docs rev: 5b41ef810fdae04a722253676edd9d5803cb50f4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
Flow and usage information has changed. Changes here reflect
that from the Toaster Team.
(From yocto-docs rev: 9774dec014b6d13623988b0d7c050c9e6deaad6f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes [YOCTO #8298]
Added "rootfsdebugfile" class to the list of classes in this
general class description.
(From yocto-docs rev: ad2f6e1d22c9453b0d28cdc0b53558efa1dcc212)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Log messages can be quite long so use a TextField rather than a char
field with max length of 240. mySQL is especially picky about field
lengths and will cause an exception if the log is too long.
[YOCTO #8475]
(Bitbake rev: 349119f44cdad240dda7f4db45992e2539e1416f)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The user is redirected to the all builds page or all projects
page from the landing page, regardless of mode.
In build mode, this makes sense; but in analysis mode, we are
restricting the view to just the cli builds project. This means
that "all projects" and "all builds" only contains items relating
to this one project.
Modify the landing page so it redirects to the project builds page
for the cli builds project when not in build mode. Also remove
navigation elements which are irrelevant when not in build mode.
[YOCTO #8514]
(Bitbake rev: ae754655fa1bc5168f43e8821773e7b7b9440a5d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that the UI content is conditional on whether BUILD_MODE
is active, modify the existing tests so that they run in
this mode by default.
[YOCTO #8514]
(Bitbake rev: 991712f3f88759e2d68af5a3fe83c1395c4f67f6)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The "latest builds" sections of the "all builds" page
show builds for all projects. This is not appropriate
for analysis mode, where we can only affect the command-line
builds project.
Modify the "latest builds" section to only show builds for
the command line builds project if in analysis mode.
Also rationalise where we get the queryset of latest builds from:
we have a _get_latest_builds() function which was being used
to get the latest builds in most places, but not all.
Also modify _get_latest_builds() to sort by started_on, rather
than primary key, as assuming that a higher primary key value equates
with later start time is incorrect.
[YOCTO #8514]
(Bitbake rev: 52de2c8cd11fa743f8fd7cb0cf776eea622ac474)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The "new build" and "new project" buttons are irrelevant in
analysis mode, as you can't start a build or a project.
Hide these buttons if not in BUILD_MODE.
[YOCTO #8514]
(Bitbake rev: b1858653c22eb6d51fc23f75ccad69b76523eb41)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|