summaryrefslogtreecommitdiffstats
path: root/meta/lib/oeqa/selftest
Commit message (Collapse)AuthorAgeFilesLines
...
* image-artifact-names: include ${IMAGE_NAME_SUFFIX} directly in both ↵Martin Jansa2023-06-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ${IMAGE_NAME} and ${IMAGE_LINK_NAME} * ${IMAGE_NAME}${IMAGE_NAME_SUFFIX} is almost always used together already and when they aren't it's usually because of hardcoded '.rootfs' suffix * it's a bit strange, because ${IMAGE_NAME_SUFFIX} is applied after the version from ${IMAGE_VERSION_SUFFIX}, if we move it to ${IMAGE_LINK_NAME} then it will be applied before the version and ${IMAGE_LINK_NAME} will be just the version-less symlink to latest built version. * it's not added to INITRAMFS_IMAGE_NAME as it assumes that all images used as initramfs will set IMAGE_NAME_SUFFIX to empty. Many already do as shown bellow, but you might need to extend this list in your layer. * this also allows to drop support for imgsuffix varflag, recipes which don't want to have .rootfs suffix can just set IMAGE_NAME_SUFFIX to empty and it will be consistently respected by both IMAGE_NAME and IMAGE_LINK_NAME * imgsuffix = d.getVarFlag("do_" + taskname, 'imgsuffix') or d.expand("${IMAGE_NAME_SUFFIX}.") is kind of terrible, notice trailing '.' after ${IMAGE_NAME_SUFFIX} while this dot was in imgsuffix in: do_bootimg[imgsuffix] = "." but in both cases it's not really part of the imgsuffix, but the "extension" type separator as in dst variable: dst = os.path.join(deploy_dir, link_name + "." + type) - src = img_name + imgsuffix + type + src = img_name + "." + type * for ubifs volumes move vname after IMAGE_NAME_SUFFIX * to better document these changes here is an example with default poky configuration with just: IMAGE_FSTYPES:append:pn-core-image-minimal = " live wic wic.vmdk ubi" MKUBIFS_ARGS = "-m 2048 -e 129024 -c 968 -x zlib" UBINIZE_ARGS = "-m 2048 -p 131072 -s 512" added in local.conf, so that deploy_dir has also some initramfs and more IMAGE_FSTYPES * "ls -lahi tmp/deploy/images/qemux86-64/" output after "bitbake core-image-minimal" And deploy-dir is cleaned between runs with: bitbake -c clean core-image-minimal core-image-minimal-initramfs virtual/kernel grub-efi systemd-boot The output confirms that the only change is ".rootfs" added not only in ext4 and manifest files, but also for hddimg, iso, qemuboot.conf testdata.json for both the actual artifacts as well as the symlinks while core-image-minimal-initramfs doesn't have them as IMAGE_NAME_SUFFIX was already set to empty there: meta/classes-recipe/baremetal-image.bbclass:IMAGE_NAME_SUFFIX ?= "" meta/recipes-core/images/core-image-minimal-initramfs.bb:IMAGE_NAME_SUFFIX ?= "" meta/recipes-core/images/core-image-tiny-initramfs.bb:IMAGE_NAME_SUFFIX ?= "" meta/recipes-extended/baremetal-example/baremetal-helloworld_git.bb:IMAGE_NAME_SUFFIX ?= "" meta/recipes-extended/images/core-image-testcontroller-initramfs.bb:IMAGE_NAME_SUFFIX ?= "" before these changes: total 297M 31269162 drwxr-xr-x 2 martin martin 4.0K Mar 7 19:19 . 31263942 drwxr-xr-x 3 martin martin 4.0K Mar 7 12:53 .. 35845703 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 35845704 -rw-r--r-- 2 martin martin 11M Mar 7 12:27 bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 35845702 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage-qemux86-64.bin -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 40236967 -rw-r--r-- 2 martin martin 13M Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.cpio.gz 40203232 -rw-r--r-- 2 martin martin 1.1K Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.manifest 40212700 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.qemuboot.conf 40211556 -rw-r--r-- 2 martin martin 211K Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.testdata.json 40236964 lrwxrwxrwx 2 martin martin 62 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.cpio.gz -> core-image-minimal-initramfs-qemux86-64-20230307181808.cpio.gz 40203235 lrwxrwxrwx 2 martin martin 63 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.manifest -> core-image-minimal-initramfs-qemux86-64-20230307181808.manifest 40212690 lrwxrwxrwx 2 martin martin 68 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.qemuboot.conf -> core-image-minimal-initramfs-qemux86-64-20230307181808.qemuboot.conf 40211560 lrwxrwxrwx 2 martin martin 68 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.testdata.json -> core-image-minimal-initramfs-qemux86-64-20230307181808.testdata.json 40237307 -rw-r--r-- 2 martin martin 57M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.hddimg 40237329 -rw-r--r-- 2 martin martin 56M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.iso 40220347 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.qemuboot.conf 40236942 -rw-r--r-- 2 martin martin 34M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.ext4 40211563 -rw-r--r-- 2 martin martin 1.2K Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.manifest 40237206 -rw-r--r-- 2 martin martin 16M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.tar.bz2 40237216 -rw-r--r-- 2 martin martin 20M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.ubi 40224358 -rw-r--r-- 2 martin martin 19M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.ubifs 40360386 -rw-r--r-- 2 martin martin 73M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.wic 40237285 -rw-r--r-- 2 martin martin 35M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.wic.vmdk 40209866 -rw-r--r-- 2 martin martin 206K Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.testdata.json 40236946 lrwxrwxrwx 2 martin martin 56 Mar 7 19:19 core-image-minimal-qemux86-64.ext4 -> core-image-minimal-qemux86-64-20230307181808.rootfs.ext4 40237336 lrwxrwxrwx 2 martin martin 51 Mar 7 19:19 core-image-minimal-qemux86-64.hddimg -> core-image-minimal-qemux86-64-20230307181808.hddimg 40237337 lrwxrwxrwx 2 martin martin 48 Mar 7 19:19 core-image-minimal-qemux86-64.iso -> core-image-minimal-qemux86-64-20230307181808.iso 40211564 lrwxrwxrwx 2 martin martin 60 Mar 7 19:19 core-image-minimal-qemux86-64.manifest -> core-image-minimal-qemux86-64-20230307181808.rootfs.manifest 40220348 lrwxrwxrwx 2 martin martin 58 Mar 7 19:19 core-image-minimal-qemux86-64.qemuboot.conf -> core-image-minimal-qemux86-64-20230307181808.qemuboot.conf 40237205 lrwxrwxrwx 2 martin martin 59 Mar 7 19:19 core-image-minimal-qemux86-64.tar.bz2 -> core-image-minimal-qemux86-64-20230307181808.rootfs.tar.bz2 40209873 lrwxrwxrwx 2 martin martin 58 Mar 7 19:19 core-image-minimal-qemux86-64.testdata.json -> core-image-minimal-qemux86-64-20230307181808.testdata.json 40237217 lrwxrwxrwx 2 martin martin 55 Mar 7 19:19 core-image-minimal-qemux86-64.ubi -> core-image-minimal-qemux86-64-20230307181808.rootfs.ubi 40236771 lrwxrwxrwx 2 martin martin 57 Mar 7 19:19 core-image-minimal-qemux86-64.ubifs -> core-image-minimal-qemux86-64-20230307181808.rootfs.ubifs 40237287 lrwxrwxrwx 2 martin martin 55 Mar 7 19:19 core-image-minimal-qemux86-64.wic -> core-image-minimal-qemux86-64-20230307181808.rootfs.wic 40237286 lrwxrwxrwx 2 martin martin 60 Mar 7 19:19 core-image-minimal-qemux86-64.wic.vmdk -> core-image-minimal-qemux86-64-20230307181808.rootfs.wic.vmdk 40237192 -rw-r--r-- 2 martin martin 3.8K Mar 7 19:19 core-image-minimal.env 34458377 -rw-r--r-- 2 martin martin 616K Mar 7 17:55 grub-efi-bootx64.efi 34963606 -rwxr-xr-x 2 martin martin 103K Mar 6 22:02 linuxx64.efi.stub 35845662 -rw-r--r-- 2 martin martin 8.2M Mar 7 12:27 modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz 35845701 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 modules-qemux86-64.tgz -> modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz 34963605 -rwxr-xr-x 2 martin martin 140K Mar 6 22:02 systemd-bootx64.efi 27651415 -rw-r--r-- 2 martin martin 274 Mar 7 19:19 ubinize-core-image-minimal-qemux86-64-20230307181808.cfg after these changes: total 297M 31269162 drwxr-xr-x 2 martin martin 4.0K Mar 7 19:16 . 31263942 drwxr-xr-x 3 martin martin 4.0K Mar 7 12:53 .. 39479266 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 39479267 -rw-r--r-- 2 martin martin 11M Mar 7 12:27 bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 39479264 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage-qemux86-64.bin -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 39648810 -rw-r--r-- 2 martin martin 13M Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.cpio.gz 39638400 -rw-r--r-- 2 martin martin 1.1K Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.manifest 39644650 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.qemuboot.conf 39637657 -rw-r--r-- 2 martin martin 211K Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.testdata.json 39648091 lrwxrwxrwx 2 martin martin 62 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.cpio.gz -> core-image-minimal-initramfs-qemux86-64-20230307181456.cpio.gz 39638401 lrwxrwxrwx 2 martin martin 63 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.manifest -> core-image-minimal-initramfs-qemux86-64-20230307181456.manifest 39644651 lrwxrwxrwx 2 martin martin 68 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.qemuboot.conf -> core-image-minimal-initramfs-qemux86-64-20230307181456.qemuboot.conf 39637662 lrwxrwxrwx 2 martin martin 68 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.testdata.json -> core-image-minimal-initramfs-qemux86-64-20230307181456.testdata.json 39654281 -rw-r--r-- 2 martin martin 34M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.ext4 39656710 -rw-r--r-- 2 martin martin 57M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.hddimg 39657112 -rw-r--r-- 2 martin martin 56M Mar 7 19:16 core-image-minimal-qemux86-64.rootfs-20230307181456.iso 39645313 -rw-r--r-- 2 martin martin 1.2K Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.manifest 39646013 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.qemuboot.conf 39656336 -rw-r--r-- 2 martin martin 16M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.tar.bz2 39644408 -rw-r--r-- 2 martin martin 206K Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.testdata.json 39656583 -rw-r--r-- 2 martin martin 20M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.ubi 39654124 -rw-r--r-- 2 martin martin 19M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.ubifs 39802371 -rw-r--r-- 2 martin martin 73M Mar 7 19:16 core-image-minimal-qemux86-64.rootfs-20230307181456.wic 39657113 -rw-r--r-- 2 martin martin 35M Mar 7 19:16 core-image-minimal-qemux86-64.rootfs-20230307181456.wic.vmdk 39654412 lrwxrwxrwx 2 martin martin 56 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.ext4 -> core-image-minimal-qemux86-64.rootfs-20230307181456.ext4 39657167 lrwxrwxrwx 2 martin martin 58 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.hddimg -> core-image-minimal-qemux86-64.rootfs-20230307181456.hddimg 39657168 lrwxrwxrwx 2 martin martin 55 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.iso -> core-image-minimal-qemux86-64.rootfs-20230307181456.iso 39645316 lrwxrwxrwx 2 martin martin 60 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.manifest -> core-image-minimal-qemux86-64.rootfs-20230307181456.manifest 39646014 lrwxrwxrwx 2 martin martin 65 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.qemuboot.conf -> core-image-minimal-qemux86-64.rootfs-20230307181456.qemuboot.conf 39656315 lrwxrwxrwx 2 martin martin 59 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.tar.bz2 -> core-image-minimal-qemux86-64.rootfs-20230307181456.tar.bz2 39644406 lrwxrwxrwx 2 martin martin 65 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.testdata.json -> core-image-minimal-qemux86-64.rootfs-20230307181456.testdata.json 39656584 lrwxrwxrwx 2 martin martin 55 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.ubi -> core-image-minimal-qemux86-64.rootfs-20230307181456.ubi 39654775 lrwxrwxrwx 2 martin martin 57 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.ubifs -> core-image-minimal-qemux86-64.rootfs-20230307181456.ubifs 39657126 lrwxrwxrwx 2 martin martin 55 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.wic -> core-image-minimal-qemux86-64.rootfs-20230307181456.wic 39657088 lrwxrwxrwx 2 martin martin 60 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.wic.vmdk -> core-image-minimal-qemux86-64.rootfs-20230307181456.wic.vmdk 39654418 -rw-r--r-- 2 martin martin 3.8K Mar 7 19:15 core-image-minimal.env 39475732 -rw-r--r-- 2 martin martin 616K Mar 7 17:55 grub-efi-bootx64.efi 31507074 -rwxr-xr-x 2 martin martin 103K Mar 6 22:02 linuxx64.efi.stub 39479261 -rw-r--r-- 2 martin martin 8.2M Mar 7 12:27 modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz 39479263 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 modules-qemux86-64.tgz -> modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz 31507058 -rwxr-xr-x 2 martin martin 140K Mar 6 22:02 systemd-bootx64.efi 27651415 -rw-r--r-- 2 martin martin 274 Mar 7 19:15 ubinize-core-image-minimal-qemux86-64.rootfs-20230307181456.cfg [YOCTO #12937] (From OE-Core rev: 26d97acc71379ab6702fa54a23b6542a3f51779c) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libproxy: update 0.4.18 -> 0.5.2Alexander Kanavin2023-06-271-1/+2
| | | | | | | | | | | | | | | License-update: formatting, years Upstream has completely overhauled the build system (cmake -> meson) and available options. Add the most important ones that require external dependencies; there's plenty more if someone finds them useful. (From OE-Core rev: bbcfef76c3d412f1a79c77f8712aff36190bf7fa) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: removeRoss Burton2023-06-271-1/+1
| | | | | | | | | | | The replacement cve-update-nvd2-native is working, so we can remove the old recipe now. (From OE-Core rev: 17eb07885147a06bf7bdd43f7869fe4411be80a0) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: Improve patch-status layer filteringRichard Purdie2023-06-202-0/+2
| | | | | | | | | | Now that we have layer overrides, we can easily enable patch-status in ERROR_QA without the hardcoded code making it easier for other layers to opt into the checks. (From OE-Core rev: 61a881fdbe8b5a21c6276b8a5d06cc30486b1eb3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/reproducible: Allow chose the package managerJose Quaresma2023-06-171-1/+5
| | | | | | | | | | This is a follow-up of 76e5fcb2 that also allow users to chose the package manager using OEQA_REPRODUCIBLE_TEST_PACKAGE (From OE-Core rev: 3d414d85b44077bac57aba36707b0fc699a73e97) Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/oescripts: Fix qemu-helper selftestRichard Purdie2023-06-171-2/+2
| | | | | | | | | | The updated selftest was assuming qemu-bridge-helper was available on the host system which isn't always the case. Tweak the test case to avoid this issue by adding dedicated help output and checking for this specifically. (From OE-Core rev: 4a80e95d1f59e0ddcedde3f64d0a0d1dc48a6e4d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqemu/qemu-helper: Drop tunctlRichard Purdie2023-06-161-2/+2
| | | | | | | | | | | ip tuntap provides the functionality that we obtained from tunctl. We only needed tunctl when ifconfig was more available than ip. That isn't the case now so we can drop tunctl and all the hoops we need to jump through to build and provide it. (From OE-Core rev: 2abfbca690ff00cb58ce08a65cde006578ee3de9) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest reproducible.py: support different build targetsMikko Rapeli2023-06-151-2/+6
| | | | | | | | | | | | | | | | | Allow users to set different build reproducibility targets than the defaults using OEQA_REPRODUCIBLE_TEST_TARGET and OEQA_REPRODUCIBLE_TEST_SSTATE_TARGETS variables in local.conf. Fixing all issues from "world" builds is not possible in some complex build environments with lots of layers. Limiting the focus to a smaller subset allows using this test to detect and fix build reproduction issues incrementally. (From OE-Core rev: c66bebbce5995e386a1a4d055a914a39b6ee518d) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/bbtests: add non-existent prefile/postfile testsFabien Mahot2023-06-151-0/+8
| | | | | | | | | | Fixes [YOCTO #10725] (From OE-Core rev: b0c33655fad5b2e7d96a45b6210527dfb766797b) Signed-off-by: Fabien Mahot <fabien.mahot@smile.fr> Reviewed-by: Yoann Congal <yoann.congal@smile.fr> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/reproducible: Allow native/cross reuse in testRichard Purdie2023-06-071-2/+2
| | | | | | | | | | | | We don't compare reproducibility of the native/cross components, only the target ones. With the long build times of rust-native, the test now takes crazy lengths of time so this tweak should allow us to reuse native/cross artefacts from sstate whilst still testing the target output is reproducible. (From OE-Core rev: b494d83c639a877cefeb7cbab6d37195e492f059) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/wic: Fix host contamination issueRichard Purdie2023-06-061-3/+5
| | | | | | | | | | If wic.Wic2.test_gpt_partition_name is run on a system without sfdisk, the test will currently fail. As done in another test, it needs to use sfdisk from the wic-tools sysroot. This patch fixes that host contamination issue. (From OE-Core rev: 6f9200cc30d50888b9b63103824880abaf8b5eea) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/sstatetests: Add easier debug optionRichard Purdie2023-06-021-0/+7
| | | | | | | | | | In order to debug these selftest failures you end up having to comment out the file cleanup. Make this an option at the top of the file to make it a bit easier, I've had to do this too many times now. (From OE-Core rev: ae69d48b0e5b58b18553a6b3cd03ffbd3f369aa3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/incompatible_lic: Ensure create_sdpx isn't used with the testsRichard Purdie2023-06-022-0/+9
| | | | | | | | | | | The SPDX class doens't get on well with non-standard licenses. Disable it for the purposes of this test to avoid errors. Add a new helper function to the core test code to allow this to be done easily. (From OE-Core rev: b9fb4c68f2ab5becb0a10418884e09dee93cd247) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: wic.py respect IMAGE_LINK_NAMEMartin Jansa2023-05-291-4/+5
| | | | | | | | | | | | * use IMAGE_LINK_NAME instead of hardcoding core-image-minimal-${MACHINE} assumption [YOCTO #12937] (From OE-Core rev: e34d7617b00ec9423221c9c7b96be6f9e5358e6a) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/cases/devtool.py: skip all tests require folder a git repoThomas Roos2023-05-251-0/+8
| | | | | | | | | | | | | Devtool selftests require poky dir a git repo, when downloading poky as a tar, this is not the case. Those tests will now skipped. [YOCTO #12389] (From OE-Core rev: 95a5bc130dc51ea9de95c64dbf0e9c7892415d50) Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: adding selftest-hello and use it to speed up testsThomas Roos2023-05-221-9/+9
| | | | | | | | | | | | | | Adding a selftest version of hello world to run it in tests where no download is necessary. Also using this in several tests to speed them up. Using the -native version wherever possible will also speed up tests a lot. [YOCTO #11142] (From OE-Core rev: c3f26b63934888df0e3cd563c1c2804eb78a368e) Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* zvariant: add ptest feature for zvariant test suiteFrederic Martinsons2023-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Below is the output of run-ptest script under qemu root@qemux86-64:~# /usr/lib/zvariant/ptest/run-ptest running 37 tests test framing_offset_size::tests::framing_offset_size_bump ... ok$<2> test owned_value::tests::from_value ... ok$<2> test object_path::unit::owned_from_reader ... ok$<2> test str::tests::from_string ... ok$<2> test signature::tests::signature_slicing ... ok$<2> test str::tests::test_ordering ... ok$<2> test owned_value::tests::map_conversion ... ok$<2> test owned_value::tests::serde ... ok$<2> test tests::enums ... ok$<2> test tests::derive ... ok$<2> test tests::f64_value ... ok$<2> test tests::i16_value ... ok$<2> test tests::fd_value ... ok$<2> test tests::i32_value ... ok$<2> test tests::i8_value ... ok$<2> test tests::i64_value ... ok$<2> test tests::ip_addr ... ok$<2> test tests::issue_59 ... ok$<2> test tests::issue_99 ... ok$<2> test tests::array_value ... ok$<2> test tests::object_path_value ... ok$<2> test tests::dict_value ... ok$<2> test tests::signature_value ... ok$<2> test tests::serialized_size ... ok$<2> test tests::struct_byte_array ... ok$<2> test tests::struct_ref ... ok$<2> test tests::str_value ... ok$<2> test tests::option_value ... ok$<2> test tests::struct_value ... ok$<2> test tests::struct_with_hashmap ... ok$<2> test tests::u16_value ... ok$<2> test tests::u32_value ... ok$<2> test tests::unit ... ok$<2> test tests::u8_value ... ok$<2> test tests::unit_fds ... ok$<2> test tests::value_value ... ok$<2> test tests::recursion_limits ... ok$<2> test result: ok$<2>. 37 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.21s root@qemux86-64:~# (From OE-Core rev: 912bbec9fe44f22ab70c3553af6cb699543b8411) Signed-off-by: Frederic Martinsons <frederic.martinsons@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/distrodata: clean up exception lists in recipe maintainers testAlexander Kanavin2023-05-051-3/+3
| | | | | | | | | | | | | | | | | Specifically: - add missing maintainer.inc entries for initramfs-module-*, systemd-machine-units and target-sdk-provides-dummy and drop them from exception list. - remove rust from exception list for unbuildable-by-default recipes as it is now buildable. - add missing maintainer.inc entry for libx11-compose-data and cve-update-nvd2-native; as they are also unbuildable by default, they needs to be in exception list as well. (From OE-Core rev: e9158b191c1cfc16f97abed6c05891aa84fe9463) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes: Default to https git protocol where possibleRichard Purdie2023-05-052-4/+6
| | | | | | | | | | The recommendation from server maintainers is that the https protocol is both faster and more reliable than the dedicated git protocol at this point. Switch to it where possible. (From OE-Core rev: 139102a73d4151f4748b4a861bd4ab28dda7dab7) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: Use SSTATE_DIR of parent build dirThomas Roos2023-04-201-0/+10
| | | | | | | | | | | This will configure the build-st/conf/local.conf with the SSTATE_DIR of the parent build dir to speed up the build, test, dev process. (From OE-Core rev: 71dca60ddcf4370ff7e91de6ddf8a7d4cf76db50) Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: wic: Add test for --part-name argumentDit Kozmaj2023-04-131-0/+23
| | | | | | | | | | | | | | | | | | | Add test for wic --part-name argument in .wks file. Test three different cases: - Set only the --part-name argument. - Set only the --label argument. In this case the GPT partition label is set to the value of --label for compatibility reasons. - Set both. In this case the code has been changed to set the GPT partition label to the --part-name value. The test uses a test_gpt_partition_name.wks file created for this purpose. (From OE-Core rev: 06af6795cf6f079362303bddb39a14459e228e72) Signed-off-by: Dit Kozmaj <dit.kozmaj@kynetics.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: efibootpartition.py: fix QEMU_USE_KVM usageMartin Jansa2023-04-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | * if you don't have QEMU_USE_KVM in local.conf it fails with: 2023-03-12 18:06:29,591 - oe-selftest - DEBUG - Checking if qemux86-64 is not this MACHINE 2023-03-12 18:06:29,594 - oe-selftest - INFO - ... ERROR 2023-03-12 18:06:29,594 - oe-selftest - INFO - Traceback (most recent call last): File "/OE/build/poky/meta/lib/oeqa/core/decorator/__init__.py", line 35, in wrapped_f return func(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^ File "/OE/build/poky/meta/lib/oeqa/selftest/cases/efibootpartition.py", line 18, in test_boot_efi if oe.types.qemu_use_kvm(self.td['QEMU_USE_KVM'], self.td["TARGET_ARCH"]): ~~~~~~~^^^^^^^^^^^^^^^^ KeyError: 'QEMU_USE_KVM' [YOCTO #12937] (From OE-Core rev: 7c32ca2f91beb98769c89470b37f06cb4b99aebb) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/bblogging: uncomment python stdout checksMark Asselstine2023-04-051-12/+6
| | | | | | | | | | | | Since bitbake commit 81a58647b2f4fc0a2589b2978fc9d81b2bfe6aec [bitbake: build: Make python output print to stdout when running with -v (verbose)] we no longer need to comment out the python stdout checks. (From OE-Core rev: 67886a8473c511c8ab3db2e4587cc5a070979d11) Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: runqemu: use better error message when asserts failMartin Jansa2023-04-031-3/+6
| | | | | | | | | | | | * It was showing whole log and that the runqemu command failed, but not where the log file is, nor why it thinks the runqemu failed [YOCTO #12937] (From OE-Core rev: ad4b72e6524114a3bdee10cab71f194ea143cd24) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: runqemu: better check for ROOTFS: in the logMartin Jansa2023-04-031-1/+2
| | | | | | | | | | | | | | | | | | * it was searching for line like this: ROOTFS: [/OE/build/poky/build/build-st-2023-03-20-esdk-runqemu-patch1/runqemu.RunqemuTests.test_boot_machine_ext4/build-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20230320081121.rootfs.ext4] but with IMAGE_NAME_SUFFIX changed to something else than default ".rootfs" or with my pending changes the line looks like this: ROOTFS: [/OE/build/poky/build/build-st-2023-03-20-esdk-runqemu-patch2/runqemu.RunqemuTests.test_boot_machine_ext4/build-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs-20230320085744.ext4] and test was failing. * Check for whole line starting with ROOTFS: and ending just with .ext4 [YOCTO #12937] (From OE-Core rev: 7a0f622f23aff2c4eeca0606e7682931eb53287a) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: imagefeatures.py: don't mix tabs and spaces for indentationMartin Jansa2023-04-031-4/+4
| | | | | | | | | | * introduced in: https://git.openembedded.org/openembedded-core/commit/?id=96d4486df6d870ef19e2055b026729e66bc118f3 (From OE-Core rev: 143f624116802579e7a6804c8d4b562f931880c8) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-selftest: provide a recipe for zvariantFrederic Martinsons2023-04-011-0/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This recipe is for showing a "real world" example of a crate that depends on some git repositories. Usually, this kind of crate is built within a global workspace (here it is the zbus project) and so doesn't need a Cargo.lock on its own. For the sake of the demonstration, I had to tweak things a little to be able to compile zvariant in standalone (no relative path in dependency, no symlink to LICENSE provide a Cargo.lock) The use case where the crate had some git repository in dependency is very common for "private" crate that are not aimed to be published on crates.io. When the project grow bigger, it is common to have a bin and multiple lib developped in parallel, and these libs are surely on a git repostitory. A test case have been also added to check for: - the previous patch about git subpath parameter and devtool - the correctness of overriding dependencies (first patch of the series) (From OE-Core rev: 409e045f96f69877de6f36ed14c5c19a9cb74eaf) Signed-off-by: Frederic Martinsons <frederic.martinsons@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: whitespace and indentation cleanupsEnrico Jörns2023-03-311-6/+6
| | | | | | | (From OE-Core rev: 4922221d1259e2f78233f17bb901cdac5b9aa520) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/cases/runqemu: update importsEnrico Jörns2023-03-311-2/+2
| | | | | | | | | | 'tempfile' and 'oeqa.utils.command.runCmd' are unused while 'os' is actually used. (From OE-Core rev: 50f766233e83528eebeca92877277374c7193530) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/imagefeatures: set a test for mutliubi in test_image_fstypesRomuald Jeanne2023-03-301-5/+20
| | | | | | | | | | | | | Allow 'multiubi' fstype image. Set 'MULTIUBI_BUILD' with two entries to allow configuration for two different '.ubifs'. Configure 'MKUBIFS_ARGS_*' and 'UBINIZE_ARGS_*' for both configurations. (From OE-Core rev: 96d4486df6d870ef19e2055b026729e66bc118f3) Signed-off-by: Romuald Jeanne <romuald.jeanne@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: eSDK rename to esdkMartin Jansa2023-03-301-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * I was hit by oe-selftest -r eSDK.oeSDKExtSelfTest.test_install_libraries_headers running all tests except only this selected one: poky $ oe-selftest -v -r eSDK.oeSDKExtSelfTest.test_install_libraries_headers -K -B /OE/build/poky/build-eSDK 2023-03-13 14:00:52,955 - oe-selftest - DEBUG - Selected tests with -r: ['eSDK.oeSDKExtSelfTest.test_install_libraries_headers'] 2023-03-13 14:00:55,531 - oe-selftest - INFO - Changing cwd to /OE/build/poky/build .. 2023-03-13 14:00:58,128 - oe-selftest - INFO - test_archiver_allows_to_filter_on_recipe_name (archiver.Archiver.test_archiver_allows_to_filter_on_recipe_name) this is caused by _built_modules_dict(modules) function which filters out eSDK.oeSDKExtSelfTest.test_install_libraries_headers based on the regexp and then it runs all loaded tests, because modules are empty the initial regexp and comment from 2017: https://git.openembedded.org/openembedded-core/commit/?id=80db3d999ae26d298d9d5418a32b11a4f27af9d5 # Assumption: package and module names do not contain upper case # characters, whereas class names do m = re.match(r'^([^A-Z]+)(?:\.([A-Z][^.]*)(?:\.([^.]+))?)?$', module) might still be valid, but it was loosened in 2018 to accept upper case in module: https://git.openembedded.org/openembedded-core/commit/?id=1ecf48fd286a77078451b67879a44f9c9dc7a894 Some test cases (eSDK.oeSDK*, runtime_test/*) does not match with current regex, fix it accept all. Then skipping the not matching modules was added later in 2018: https://git.openembedded.org/openembedded-core/commit/?id=f2042bf3638ed4edfb167e7f7d4be6da60997ead and regexp was updated again in 2020 not to accept upper case in modules: https://git.openembedded.org/openembedded-core/commit/?id=ad81ea90a815389e45ff302a85151724c71f71c3 oeqa/core/loader: refine regex to find module test case in format <module name>.<class name>.<test case name> this is clear when test cases is only 3 item deep. but confused when it is 4 item deep, eg, oelib.types.TestList.test_list_nosep I'm afraid that changing this regexp again to accept eSDK will break someone's favorite test case, renaming eSDK looks much safer option There is only 1 such case in poky: $ oe-selftest --list-modules | grep INFO.- | sed 's/^.*INFO - //g' | grep -v '^[a-z_\.]*$' Listing all available test modules: eSDK Most modules are just a-z (52x), then oelib.<foo> (6x) and 7 modules with underscore '_'. (From OE-Core rev: 173ef4397b5be19f72385b1a0d892a1fa8979d53) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/cases/package.py: adding unittest for package rename conflictsFawzi KHABER2023-03-301-0/+7
| | | | | | | | | | | This Unittest tries to rename a package, using an already used name and fails on do_package. Reviewed-by: Yoann CONGAL <yoann.congal@smile.fr> (From OE-Core rev: c3fe173d5196506d89aa464ba56aabcf581a60db) Signed-off-by: Fawzi KHABER <fawzi.khaber@smile.fr> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-check: Fix false negative version issueGeoffrey GIRY2023-03-301-0/+19
| | | | | | | | | | | | | | | NVD DB store version and update in the same value, separated by '_'. The proposed patch check if the version from NVD DB contains a "_", ie 9.2.0_p1 is convert to 9.2.0p1 before version comparison. [YOCTO #14127] Reviewed-by: Yoann CONGAL <yoann.congal@smile.fr> (From OE-Core rev: 7d00f6ec578084a0a0e5caf36241d53036d996c4) Signed-off-by: Geoffrey GIRY <geoffrey.giry@smile.fr> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/reproducible: Split different packages from missing packages ↵Jose Quaresma2023-03-281-3/+7
| | | | | | | | | | | | | output When we provide sstate_targets recipes they are reported as missing which is not quite correct because they are proveided to cut build/debugging time. (From OE-Core rev: fd70a564d6946fa460638dd04ce2daecf4566cf3) Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: OESelftestTestContext: convert relative to full path when ↵Jose Quaresma2023-03-281-0/+10
| | | | | | | | | | | | | | | | | | | | | newbuilddir is provided Relative paths in BBLAYERS only works when the new build dir are on the same ascending directory node: . ├── build ├── build-st It works because they share the same ascending relative directory node. So use the full path when the argument newbuilddir is provided to make the oe-selftest work everywere regardless of the location chosen. (From OE-Core rev: 2e022c1977bc1006c00a87e08a2dca5b69db4801) Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqs/selftest: OESelftestTestContext: replace the os.environ after ↵Jose Quaresma2023-03-281-5/+5
| | | | | | | | | | | | subprocess.check_output No function change but is needed to simplify the next patch. (From OE-Core rev: 193d8f0d6383f54c61f90d58eeb8f41580c2360a) Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: imagefeatures.py: respect IMAGE_LINK_NAME for debugfs and manifest ↵Martin Jansa2023-03-221-42/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | as well * these cases were correctly respecting IMAGE_LINK_NAME in most tests * the only exception was relatively wide glob for manifest: "test-empty-image-*.manifest" * and even wider glob for -dbg: "*-dbg.rootfs.tar.bz2" * replace them with the exact filename we expect for given image * be aware that gzip won't accept the symlink in IMAGE_LINK_NAME causing: 2023-03-13 08:58:23,845 - oe-selftest - INFO - ... FAIL 2023-03-13 08:58:23,845 - oe-selftest - INFO - Traceback (most recent call last): File "/OE/build/poky/meta/lib/oeqa/selftest/cases/imagefeatures.py", line 124, in test_bmap self.assertTrue(runCmd('gzip -t %s' % gzip_path)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/OE/build/poky/meta/lib/oeqa/utils/commands.py", line 214, in runCmd raise AssertionError("Command '%s' returned non-zero exit status %d:\n%s" % (command, result.status, exc_output)) AssertionError: Command 'gzip -t /OE/build/poky/build/build-st-2023-03-12-todo-patch2/imagefeatures.ImageFeatures.test_bmap/build-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.ext4.bmap.gz' returned non-zero exit status 1: gzip: skipping: /OE/build/poky/build/build-st-2023-03-12-todo-patch2/imagefeatures.ImageFeatures.test_bmap/build-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.ext4.bmap.gz is a symbolic link * and "*-dbg.rootfs.tar.bz2" doesn't work if IMAGE_NAME_SUFFIX is changed to anything else than ".rootfs" or moved into IMAGE_LINK_NAME (like I plan in future changes where this will need to be updated again). Luckily we can use the symlink which currently doesn't have IMAGE_NAME_SUFFIX nor the DATETIME, so we don't need to search for it with glob, e.g. currently: core-image-minimal-qemux86-64-dbg-20230313112546-dbg.rootfs.tar.bz2 core-image-minimal-qemux86-64-dbg.tar.bz2 -> core-image-minimal-qemux86-64-dbg-20230313112546-dbg.rootfs.tar.bz2 [YOCTO #12937] (From OE-Core rev: 39285e981343930e41afe4eb8f2db675a85d54c2) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: minidebuginfo.py respect IMAGE_LINK_NAMEMartin Jansa2023-03-221-7/+8
| | | | | | | | | | | | | * use IMAGE_LINK_NAME instead of hardcoding core-image-minimal-${MACHINE} assumption [YOCTO #12937] (From OE-Core rev: 9f8ffe22d9bb7cd93b9bc9ece917a48b27ab22d3) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: gdbserver.py: respect IMAGE_LINK_NAMEMartin Jansa2023-03-221-4/+5
| | | | | | | | | | | | | * use IMAGE_LINK_NAME instead of hardcoding core-image-minimal-${MACHINE} assumption [YOCTO #12937] (From OE-Core rev: 3ee65ecdf841d74e2767d620e7f4a62e3a8863dc) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: fitimage.py: respect INITRAMFS_IMAGE_NAME and KERNEL_FIT_LINK_NAMEMartin Jansa2023-03-221-18/+16
| | | | | | | | | | | | | | | | | | | | | | | * use these variables instead of assuming: "fitImage-its-%s-%s-%s" % (image_type, machine, machine) notice that these files have no extension and the -machine suffix is duplicated (once from core-image-minimal and once from kernel-fitimage.bbclass:kernel_do_deploy:append through KERNEL_FIT_LINK_NAME which is MACHINE by default: KERNEL_FIT_NAME ?= "${KERNEL_ARTIFACT_NAME}" KERNEL_FIT_LINK_NAME ?= "${KERNEL_ARTIFACT_LINK_NAME}" KERNEL_ARTIFACT_NAME ?= "${PKGE}-${PKGV}-${PKGR}-${MACHINE}${IMAGE_VERSION_SUFFIX}" KERNEL_ARTIFACT_LINK_NAME ?= "${MACHINE}" [YOCTO #12937] (From OE-Core rev: d6e52428ca25d9b6ec2a52406f2d1859d05867d3) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: runqemu: respect IMAGE_LINK_NAMEMartin Jansa2023-03-221-4/+6
| | | | | | | | | | | | | | * don't assume that every built image is named: <recipe>-<machine>.<suffix> [YOCTO #12937] (From OE-Core rev: d3c1c983d062f0731610f4a6984126ec6dab8caf) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: wic: respect IMAGE_LINK_NAME also in test_rawcopy_plugin_qemuMartin Jansa2023-03-221-1/+5
| | | | | | | | | | | | | | | | * this one is more tricky, because the test_rawcopy_plugin.wks.in file is used while building core-image-minimal-mtdutils, but the image filename inside wks.in is from core-image-minimal, so we cannot just let bitbake expand IMAGE_LINK_NAME, use separate variable set in the same config fragment IMAGE_LINK_NAME_CORE_IMAGE_MINIMAL [YOCTO #12937] (From OE-Core rev: 8864ee825fdc52fe7a8cf93876c81c639fba66f4) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: wic: respect IMAGE_LINK_NAMEMartin Jansa2023-03-221-19/+19
| | | | | | | | | | | | | * use IMAGE_LINK_NAME instead of hardcoding core-image-minimal-${MACHINE} assumption [YOCTO #12937] (From OE-Core rev: d6151aeb1e8f6162113b1123fa0f162536e48a44) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: devtool: set BB_HASHSERVE_UPSTREAM when setting SSTATE_MIRRORMartin Jansa2023-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * with my build/conf/local.conf: SSTATE_DIR = "/OE/build/poky/build/sstate-cache" these devtool tests will first set own SSTATE_DIR and the original one set as SSTATE_MIRROR: 2023-03-11 11:51:46,837 - oe-selftest - INFO - test_devtool_update_recipe_append (devtool.DevtoolUpdateTests.test_devtool_update_recipe_append) 2023-03-11 11:51:46,846 - oe-selftest - DEBUG - Appending to: /OE/build/poky/build/build-st-2023-03-11-patch2/devtool.DevtoolUpdateTests.test_devtool_update_recipe_append/build-st/conf/selftest.inc SSTATE_DIR = "/OE/build/poky/build/build-st-2023-03-11-patch2/devtool.DevtoolUpdateTests.test_devtool_update_recipe_append/build-st/sstate_devtool" SSTATE_MIRRORS += "file://.* file:////OE/build/poky/build/sstate-cache/PATH" * but that unfortunately leads to a warning from sanity.bbclass about SSTATE_MIRRORS without matching BB_HASHSERVE, because BB_HASHSERVE is set to "auto" by default these tests failing with: 2023-03-11 11:55:39,610 - oe-selftest - INFO - ====================================================================== 2023-03-11 11:55:39,610 - oe-selftest - INFO - FAIL: test_devtool_update_recipe_append_git (devtool.DevtoolUpdateTests.test_devtool_update_recipe_append_git) 2023-03-11 11:55:39,610 - oe-selftest - INFO - ---------------------------------------------------------------------- 2023-03-11 11:55:39,611 - oe-selftest - INFO - Traceback (most recent call last): File "/OE/build/poky/meta/lib/oeqa/selftest/cases/devtool.py", line 1118, in test_devtool_update_recipe_append_git self.assertNotIn('WARNING:', result.output) AssertionError: 'WARNING:' unexpectedly found in 'NOTE: Starting bitbake server...\nWARNING: You are using a local hash equivalence server but have configured an sstate mirror. This will likely mean no sstate will match from the mirror. You may wish to disable the hash equivalence use (BB_HASHSERVE), or use a hash equivalence server alongside the sstate mirror.\nLoading cache...done.\nLoaded 0 entries from dependency cache.\nParsing recipes...done.\nParsing of 947 .bb files complete (0 cached, 947 parsed). 1764 targets, 52 skipped, 0 masked, 0 errors.\n\nSummary: There was 1 WARNING message.\nINFO: Updating SRCREV in recipe mtd-utils-selftest_git.bb\nNOTE: Writing append file /tmp/devtoolqa1m2lh02v/layer/recipes-devtools/mtd/mtd-utils-selftest_git.bbappend' ---------------------------------------------------------------------- * just setting BB_HASHSERVE to empty doesn't work, because then we would need to disable OEEquivHash as well as it fails with: ERROR: OEEquivHash requires BB_HASHSERVE to be set (From OE-Core rev: 96d4392ee9c5c3674e5c4c4512f527a2ca6765e4) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/sstate: Split classes to allow more parallelismRichard Purdie2023-03-131-4/+8
| | | | | | | | | | | By splitting the single class into multiple classes, it allows more parallelism in the execution. These tests don't have interdependencies that benefit from sstate reuse or anything like that so this makes sense to improve overall test execution time if/where possible. (From OE-Core rev: 9dbc2f4ebbde47b1c997948a9690ffb8eb29b552) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/sstate: Move common code to base classRichard Purdie2023-03-131-99/+98
| | | | | | | | | Move the other common shares test functions to the base class to improve the code structure. (From OE-Core rev: de3e6f85c5537a3571ffbe2326b73f2c2526bce2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/sstate: Merge sstate test class with tests themselvesRichard Purdie2023-03-133-70/+60
| | | | | | | | | Having this base class as a separate file is just confusing. Merge with the rest of the test code. (From OE-Core rev: 977522a3b063225e22e2fd04b8265a4595606db2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/recipetool: Stop test corrupting tinfoil classRichard Purdie2023-03-131-1/+4
| | | | | | | | | | | | | | | | | | | | | | Running recipetool.RecipetoolTests.test_recipetool_handle_license_vars followed by wic.Wic2.test_biosplusefi_plugin_qemu would show a failure of: File "/media/build/poky/meta/lib/oeqa/utils/commands.py", line 351, in runqemu qemu = oeqa.targetcontrol.QemuTarget(recipedata, targetlogger, image_fstype) File "/media/build/poky/meta/lib/oeqa/targetcontrol.py", line 116, in __init__ use_kvm = oe.types.qemu_use_kvm(d.getVar('QEMU_USE_KVM'), d.getVar('TARGET_ARCH')) File "/media/build/poky/meta/lib/oe/types.py", line 182, in qemu_use_kvm if kvm and boolean(kvm): File "/media/build/poky/meta/lib/oe/types.py", line 128, in boolean raise ValueError("Invalid boolean value '%s'" % value) ValueError: Invalid boolean value '/media/build/poky/meta/files/common-licenses' which made no sense until you realise the recipetool test is corrupting the tinfoil class. Work on a copy instead to avoid this. (From OE-Core rev: 7fe76fe17f67c1bbd108d02836692fed20d24771) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/resulttool: add test for error propagation in test name filteringAlexis Lothoré2023-03-121-0/+24
| | | | | | | (From OE-Core rev: 17d825c88499c6f7e3ffe22fae099871d0850abc) Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/resulttool: fix fake data used for testingAlexis Lothoré2023-03-121-4/+4
| | | | | | | | | | | resulttool searches for "status" field, not "STATUS", in results. This fix is more to avoid confusion than fixing anything, since the updated tests are about regression.can_be_compared, which does not check for "status" (From OE-Core rev: df342c81d02dea3f677966602089d4a972bb09bd) Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-04 15:37:31 +0000