summaryrefslogtreecommitdiffstats
path: root/meta/lib/oeqa
Commit message (Collapse)AuthorAgeFilesLines
...
* oeqa/sdk: Add basic rust cargo testOtavio Salvador2022-07-283-0/+42
| | | | | | | | | | | Add a QA test to the SDK to test that a basic cargo build works. [RP: Tweaked to work for multilibs and updated to match toolchain changes] (From OE-Core rev: d0cfe587bc897e79ef01805cc9a42fbca28c883c) Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/gotoolchain: set CGO_ENABLED=1Ross Burton2022-07-251-0/+1
| | | | | | | | | | | | | | | In cross-compiles CGO_ENABLED=1 needs to be set explicitly, as otherwise Go refuses to use it even if CC is already set. This fixes the selftest on setups where the host and the SDK target don't have matching architectures. [ YOCTO #14859 ] (From OE-Core rev: 19be072619d39267df44f23c4c8b64f3808f6148) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/gotoolchain: put writable files in the Go module cacheRoss Burton2022-07-251-6/+1
| | | | | | | | | | | By default 'go mod' creates read-only files, but that just complicates things. Add -modcacherw to make the cache read/write, so it can be cleaned up without needing to chmod. (From OE-Core rev: 7ff30e0d9fe8527cbc2f8ca84e0300fdc84663b6) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: rename git.py to intercept.pyRoss Burton2022-07-252-3/+3
| | | | | | | | | | | | By naming this test class git.py, any attempt to import GitPython (as needed by oelib.buildhistory) failed. As this class exercises the intercepts, rename it to intercept.py. (From OE-Core rev: d557cbbf86767bc2ebf2beb3d70af3b3ca5e0529) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* zlib: remove historical movement of libz.so to /libRoss Burton2022-07-251-5/+4
| | | | | | | | | | | | | Historically there's been a split between /lib for early boot and /usr/lib for everything else, but with modern systems this split is meaningless and incomplete. If a minimal system for early boot is needed, it should be a full minimal system in a initramfs. [RP: Fixed up selftest to match] (From OE-Core rev: 990073dfc167354b4af41db83ac46c18b1aa99d5) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime: add test that the kernel has CONFIG_PREEMPT_RT enabledRoss Burton2022-07-201-0/+17
| | | | | | | | | | | This is the absolute bare minimum for testing the RT patches, but it does mean we if we build and boot a RT kernel we can verify that it is what we expect. (From OE-Core rev: 0301d5845115d09299f87683b3efa46f3b4c7be9) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/runtime_test/virgl: Disable for all almalinuxRichard Purdie2022-07-151-1/+1
| | | | | | | | | We can't support vgem on RHEL derived distros so disable this test for all almalinux hosts rather than specific versions. (From OE-Core rev: e921f3c1b917072e4c5a110c7dfeeadd2e571bde) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: introduce UBOOT_MKIMAGE_KERNEL_TYPEMing Liu2022-07-151-1/+3
| | | | | | | | | | | | | | | | Sometimes an end user might want to choose another kernel type argument for uboot-mkimage other than "kernel", for instance: "kernel_noload". Let's introduce a variable UBOOT_MKIMAGE_KERNEL_TYPE to support that, and it could be used by BSP layers as well. (From OE-Core rev: e288686e97de1265eeeaf452141e1473867efb1b) (From OE-Core rev: 4eb7bbcc2f08b25387a15b7e4a89ef199783c973) Signed-off-by: Ming Liu <liu.ming50@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/sstatetests: Update test to work with bitbake changesRichard Purdie2022-07-151-0/+2
| | | | | | | | | | | | | | Bitbake is dropping the DL_DIR fallback for local file urls and ensuring local urls are fetchable. This test fails as it copies the meta directory of COREBASE but not scripts and nativesdk-qemu-helper references runqemu from there which doesn't exist in the copied data. Tweak to symlink scripts into position in the copied metadata which avoids the now fatal parsing error. (From OE-Core rev: 5a5199943de5df9a4d44277d07f4313642c34b3a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: test_invalid_recipe_src_uri expect parse time errorPaulo Neves2022-07-151-3/+1
| | | | | | | | | | | | | Before this commit the test expected a runtime error but the logic of the fetcher changed so that files not found for checksumming cause a fatal interruption of the parse, thuse never reaching the runtime error this test expected. This commit aligns with the bitbake changes to the fetcher. (From OE-Core rev: 8b506bfbdd18dfdb411080f69ef5c0d416b3f2e0) Signed-off-by: Paulo Neves <ptsneves@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oe-selftest: devtool: test modify git recipe building from a subdirPaul Eggleton2022-07-141-17/+97
| | | | | | | | | | | | | | Add a test that verifies that devtool modify + devtool finish do the right thing on a recipe that fetches from git and sets S to point to a subdirectory of the source tree. We have a few examples among the core recipes, dos2unix is a convenient one so let's use that. (The test first verifies that that is still true in case the recipe is changed in future.) (From OE-Core rev: a84d9ed14173b0bf467ea78dff4f0f7bae0bc082) Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/bbtests: Update message lookup for test_git_unpack_nonetwork_failAlexandre Belloni2022-07-081-1/+1
| | | | | | | | | bitbake's output changed, update the test (From OE-Core rev: 7e64b63f96dd1d71e263e7bbbe6591e51e98395a) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/sysroot.py: Check bitbake return statusPaulo Neves2022-07-081-0/+5
| | | | | | | | | | | bitbake ran but we incorrectly did not assert the exit status needs to be non 0. Now all sysroot tests commands expected to fail are verified to do so. (From OE-Core rev: 5fe8c14f50d414e768588cef0675d8ef296ced77) Signed-off-by: Paulo Neves <ptsneves@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* utils: Add cmdline_shebang_wrapper util.Paulo Neves2022-07-011-0/+11
| | | | | | | | | | | | Useful to work around shebang relocation issues, where shebangs are too long or have arguments in them, thus preventing them from using the /usr/bin/env shebang. (From OE-Core rev: 6edc1fffcbe1405d8c309a75643d7d6cd9a92848) Signed-off-by: Paulo Neves <ptsneves@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: Test staged .la and .pc filesPaulo Neves2022-07-011-0/+32
| | | | | | | | | | | | These files are checked by qa_check_staged but there was no test cases for whether the tests actually worked. Now there are. (From OE-Core rev: 2a96719a201cb7b8db774718adec89dbd7e1aec3) Signed-off-by: Paulo Neves <ptsneves@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: Add test for shebang overflowPaulo Neves2022-07-011-0/+10
| | | | | | | | | | | | | Make sure we do not stage any executable with a bigger shebang than 128. Fixes [1] [1] https://bugzilla.yoctoproject.org/show_bug.cgi?id=11053 (From OE-Core rev: 280f68528c93b5ffab888c99190accf59e807a3f) Signed-off-by: Paulo Neves <ptsneves@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipetool/devtool: Fix python egg whitespace issues in PACKAGECONFIGThomas Roos2022-07-011-1/+14
| | | | | | | | | | | | | | | | | | | Substitute expressions or whitespace from python egg requires.txt when generating PACKAGECONFIG Pysetuptools sees the uvicorn.egg-info/requires.txt as extra requirements. Recipetool parses this information to generate the PACKAGECONFIG. These extra requirements contain expressions and whitespace, which are not allowed in PACKGAGECONFIG. This patch substitute them by hyphens to make PACKAGECONFIG parsable and readable. Also adding an oe-selftest for this. [YOCTO #14446] (From OE-Core rev: a854d95a79e64f3f82abfa4cc1daec750abf4249) Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* buildperf/base.py: skip reduced_proc_pressure directoryAryaman Gupta2022-06-301-1/+1
| | | | | | | | | | | | | | | | Buildperf was designed to skip all non-directories under buildstats, i.e. proc log files. With the /proc/pressure stats being collected in a new directory, the following error was seen: meta/lib/oeqa/buildperf/base.py", line 392, in split_nevr n_e_v, revision = nevr.rsplit('-', 1) ValueError: not enough values to unpack (expected 2, got 1) Add an additional check to skip the reduced_proc_pressure directory. (From OE-Core rev: d3a25dd7aa63ab98c8bb931b4b3bc61807806ed3) Signed-off-by: Aryaman Gupta <aryaman.gupta@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: Change -dev RDEPENDS to RRECOMMENDSRichard Purdie2022-06-281-1/+1
| | | | | | | | | | | Switch the default DEPENDS for ${PN}-dev to be a RRECOMMENDS instead. This takes advantage of a change to complmentary package globbing to not follow RRECOMMENDS and means and SDK for an image with both openssh and dropbear compoments will now build successfully. (From OE-Core rev: 6f28420ab0e8f2ab5eb06326024777a40aded0a6) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/scp: Disable scp test for dropbearRichard Purdie2022-06-251-1/+1
| | | | | | | | | | | | | | | Fedora is switching to use sftp as the backend for scp. This means the scp test fails on Fedora 36 hosts with a dropbear target as dropbear doesn't support sftp. This change is in the upstream openssh code, other distros have not yet changed the default but probably will follow. The easiest way to resolve test failures in dropbear images is to stop testing this against dropbear as it is no longer expected to work and will likely spread as the change filters through other distros. (From OE-Core rev: a71fc7d455400f406b0d607be712a1133fe91166) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/sdk: drop the nativesdk-python 2.x testAlexander Kanavin2022-06-251-11/+0
| | | | | | | | | | Python 2.x has been EOL for a while, and so this test never runs. (From OE-Core rev: b687627e9cffb8123c156413f55ea1929f1a7831) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/cve_check: add tests for Ignored and partial reportsMarta Rybczynska2022-06-171-0/+82
| | | | | | | | | | | Add testcases for partial reports with CVE_CHECK_REPORT_PATCHED and Ignored CVEs. (From OE-Core rev: 3f7639b90004973782a2e74925fd2e9a764c1090) Signed-off-by: Marta Rybczynska <marta.rybczynska@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* weston.py: added xwayland testssuesens2022-06-151-0/+8
| | | | | | | | | | | | Test xwayland support if DISTRO_FEATURE X11 is enabled Test checked if xserver listening on display (From OE-Core rev: c8dea13bd65f1695c79eba26b092d411a1699b19) Signed-off-by: ssuesens <sebastian.suesens@baslerweb.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oescripts: change compare logic in OEListPackageconfigTestsMingli Yu2022-06-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When multilib enabled and add layers/meta-openembedded/meta-oe in conf/bblayers.conf, it reports below error when run oe-selftest. $ oe-selftest -r oescripts [snip] [20:36:33-0700] 2022-05-16 03:36:33,494 - oe-selftest - INFO - RESULTS - oescripts.OEListPackageconfigTests.test_packageconfig_flags_option_flags: FAILED (585.37s) [snip] It is because the output of "list-packageconfig-flags.py -f" as below: $ ../scripts/contrib/list-packageconfig-flags.py -f [snip] qt lib32-pinentry lib32-wxwidgets nativesdk-pinentry pinentry pinentry-native wxwidgets wxwidgets-native secret lib32-pinentry nativesdk-pinentry pinentry pinentry-native [snip] But the check logic as below: class OEListPackageconfigTests(OEScriptTests): #oe-core.scripts.List_all_the_PACKAGECONFIG's_flags def check_endlines(self, results, expected_endlines): for line in results.output.splitlines(): for el in expected_endlines: if line.split() == el.split(): expected_endlines.remove(el) break def test_packageconfig_flags_option_flags(self): results = runCmd('%s/contrib/list-packageconfig-flags.py -f' % self.scripts_dir) expected_endlines = [] expected_endlines.append("PACKAGECONFIG FLAG RECIPE NAMES") expected_endlines.append("qt nativesdk-pinentry pinentry pinentry-native") expected_endlines.append("secret nativesdk-pinentry pinentry pinentry-native") self.check_endlines(results, expected_endlines) And the test will fail as line.split() doesn't equal el.split() as line.split() is ['lib32-pinentry', 'lib32-wxwidgets', 'nativesdk-pinentry', 'pinentry', 'pinentry-native', 'wxwidgets', 'wxwidgets-native'] and el.split() is ['nativesdk-pinentry', 'pinentry', 'pinentry-native']. So change the compare logic to fix the gap. (From OE-Core rev: 239f22847bcae0cb31769adb0a42b5440173a7c5) Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/multiconfig: Test that multiconfigs in separate layers worksRichard Purdie2022-06-111-0/+13
| | | | | | | | | | | | | We should test that mutliconfigs from a layer work, not just build/conf. This adds such a test. [YOCTO #13566] (From OE-Core rev: 2306261fb85d5d03145989c3af9c6897111644ae) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/imagefeatures: Disable squashfs-lzoRichard Purdie2022-05-291-1/+1
| | | | | | (From OE-Core rev: c8c8b5265c831a2827a3891c7b326b25eae7f681) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/imagefeatures: Replace lzo with zstRichard Purdie2022-05-291-2/+2
| | | | | | | | We may remove lzo so switch the test case to zstd. (From OE-Core rev: f749a8b462b915713912342444f981125938a990) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/wic.py: Repaired test_qemu()Tobias Schmidl2022-05-271-1/+1
| | | | | | | | | | The grep is too wide, so it falsely fits additional lines that have a UUID (i.e, `/`). (From OE-Core rev: f72fdea1c890ddd793aa63bb9c1c0857962161cc) Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/cve_check: add tests for recipe and image reportsRoss Burton2022-05-201-1/+76
| | | | | | | | | | | | | Add a test to verify that the JSON reports are generated correctly for both single recipe builds and image builds. More tests are needed, but this is better than nothing. (From OE-Core rev: df0f35555b09c4bc75470eb45ec9c74e6587d460) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/imagefeatures/overlayfs: Always append to DISTRO_FEATURESRichard Purdie2022-05-162-9/+9
| | | | | | | | | | Using += unintentionally removes all other entries from DISTRO_FEATURES if DISTRO_FEATURES was set by ?= such as by poky.conf. This reduces sstate reusage on the autobuilder. Fix this to speed up builds. (From OE-Core rev: 124b82c32c4545bb216a8249954817f692f9795a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* virgl: skip headless test on alma 8.6Steve Sakoman2022-05-151-1/+1
| | | | | | | | | | | As a centos 8 spinoff, it lacks the same vgem kernel module. (From OE-Core rev: 451605aa40482516c18cd1534feacb796516a785) (From OE-Core rev: 8f74418637fbcdd7c68636ec1b9adfffc245f9c1) Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: add test for git working correctly inside pseudoRoss Burton2022-05-071-0/+15
| | | | | | | | | | | | | The fix for CVE-2022-24765 in git[1] breaks any use of git inside pseudo. Add a simple test case to oe-selftest to verify that at least basic uses of git work fine under pseudo. [1] https://github.com/git/git/commit/8959555cee7ec045958f9b6dd62e541affb7e7d9 (From OE-Core rev: 46822268040a23dbb81f71fe35aee8c2663a31f6) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes: rootfs-postcommands: add skip option to overlayfs_qa_checkClaudius Heine2022-05-031-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The overlayfs_qa_check checks if the current root file system has a mount configured for each overlayfs, when the overlayfs class is used. However there are certain instances where this mount point is created at runtime and not static in a fstab entry or systemd mount unit. One such case would be if overlayfs-etc is used, where the device is mounted in the preinit script and not via a mount unit or fstab entry. However there are other possibilities for this as well, like startup scripts that support a dynamic partition layout. For instance when systemd-repart is used. This adds the `OVERLAYFS_QA_SKIP` variable, which allows to define QA skips via its flags. In principle it supports multiple QA skip flags separated by whitespace, but only one (`mount-configured`) is implemented here. To skip this QA check simply add `mount-configured` to the flag of `OVERLAYFS_QA_SKIP` with the same name. For instance if a overlayfs is configured as: OVERLAYFS_MOUNT_POINT[data] = "/data" Skipping this QA check can be done by setting: OVERLAYFS_QA_SKIP[data] = "mount-configured" Also add a testcase and fix a typo (fstat -> fstab). (From OE-Core rev: 2ce9173169a2a86392c4a85fe9be7fbbd7353b7f) Signed-off-by: Claudius Heine <ch@denx.de> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cases/buildepoxy.py: fix typoChen Qi2022-04-261-1/+1
| | | | | | | | (From OE-Core rev: 3a9b6e71d1e7e8e2ebc0ed047841e36f09300387) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* apt: add apt selftest to test signed package feedsFerry Toth2022-04-192-7/+69
| | | | | | | | | | | | | | | | | Since Gatesgarth apt (1.8.2) has become more strict and doesn’t allow unsigned repositories by default. Currently when building images this requirement is worked around by using [allow-insecure=yes] and equivalently when performing selftest. Patches "gpg-sign: Add parameters to gpg signature function" and "package_manager: sign DEB package feeds" enable signed DEB package feeds. This patch adds a runtime test for apt derived from the test_testimage_dnf test. It creates a signed deb package feed, runs a qemu image to install the key and performs some package management. To be able to install the key the gnupg package is added to the testimage. (From OE-Core rev: 3ec30490d09d6639eea2638cf12a323948f221cc) Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/lic_checksum: Add test for filename containing spacePaulo Neves2022-04-191-0/+18
| | | | | | | | | | | A fix is being added to bitbake to correctly handle spaces inside checksum filenames. Add a test to oe-selftest to ensure this is tested and doesn't regress in future. (From OE-Core rev: 324109f034f069ee3e91a1a705b3449911a448de) Signed-off-by: Paulo Neves <ptsneves@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: generalise test_devtool_virtual_kernel_modifyRoss Burton2022-04-011-21/+17
| | | | | | | | | | | | | | | | | | | Generalise this test so that it works on more than qemux86-64: - Don't edit a file in arch/x86 to cause a rebuild, instead use init/ - Look for the edits in the build tree, as the deployed kernel could be of any type (zImage/bzImage/etc) and edits may be in the compressed part. Also remove redundant checks on the result of runCmd(), as this will raise AssertionError exceptions itself so the explicit asserts will never trigger. (From OE-Core rev: f1d2b2ec51f748a28d1bca6615558d553876e5c3) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/wic: use self.td instead of get_bb_var to save on bitbake callsRoss Burton2022-04-011-16/+12
| | | | | | | | | | | | | | | | When a test case starts, self.td is populated with all the variables in the data store. Typically this can be used instead of get_bb_var(), which saves a bitbake call per variable lookup. The only catch is that in parallel runs the build directory is moved after td is populated, so paths in the build directory are wrong: these still need to be fetched in the test. (From OE-Core rev: 884201c6c1bbf7c1b958bab7d7c91e27577eeaac) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/wic: use os.path.join to join pathsRoss Burton2022-04-011-46/+46
| | | | | | | | | | Instead of using string concatenation, use os.path.join. (From OE-Core rev: 73d1b7163792ec089ffb3bf99f1b4f8760beaea7) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/wic: rearrange testsRoss Burton2022-04-011-77/+77
| | | | | | | | | | | | Split the tests into further classes: one which exercises the CLI and doesn't need to build images at all, and another which is just the tests that manipulate existing images. (From OE-Core rev: c9bc4def71325dba7b7ad93001f7fe1acced0bea) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/wic: cleanup WicTestCase.setUpLocalRoss Burton2022-04-011-8/+4
| | | | | | | | | | | Use os.path.join to construct paths, and invoke bitbake once instead of three times. (From OE-Core rev: 27953d4cf6edc86cd505826c3da21222864c7760) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/oescripts: refactor skipping logicRoss Burton2022-04-011-9/+5
| | | | | | | | | | | | | | | | | OEScriptTests currently skips if cairo isn't present, and does a build of core-image-minimal. This is only required for the OEPybootchartguyTests tests, so move that logic there so that the OEListPackageconfigTests run even if cairo isn't available. This leaves OEScriptTests as a simple class containing the scripts_dir assignment, which can then be reused by other tests to avoid code duplication. (From OE-Core rev: fe3ee517772ad8396fcac21ae7eb8d1c8b68fbdb) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: rationalise skipifqemu decoratorsRoss Burton2022-04-018-51/+25
| | | | | | | | (From OE-Core rev: 1a3a37cc2b16a8d5cd2258b0b35be43baa363f67) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: tag tests that use runqemuRoss Burton2022-04-018-6/+32
| | | | | | | | | | | There may be environments or machines which don't have working runqemu, so tag all of the tests which use runqemu() so that they can be skipped. (From OE-Core rev: 3f45ce6d2b1dfde8bc3d554397d55f81846c52d5) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/core/decorators/data: improve has_* logicRoss Burton2022-04-011-3/+3
| | | | | | | | | | | | | has_feature() should be splitting the feature string into substrings and then looking for membership instead of looking for simple substrings. has_machine() should be using equality instead of substrings. (From OE-Core rev: a4c63819234e252c58e040af8bbdbfb96b6feccf) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: remove unused importsRoss Burton2022-04-0120-35/+14
| | | | | | | (From OE-Core rev: 7ef7b03eeefc0a9911fd62c73e346fa5aeeb09eb) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/core/utils/misc: remove redundant fileRoss Burton2022-04-011-47/+0
| | | | | | | | | | | This file dates back to 2016. Half of the functions have never been used, the rest are used in one place and have now been replaced. (From OE-Core rev: 5a053b2a84e7a671925fb4a78005145786c57f6a) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/core/decorator: remove redundant codeRoss Burton2022-04-011-8/+3
| | | | | | | | | | | There's no need to wrap *tags in a potential list, as *tags will always be a tuple. (From OE-Core rev: 54210c518bcb76d80c8ec9564d1ddf344e9d8924) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/decorator/package.py: remove use of strToSetRoss Burton2022-04-011-3/+6
| | | | | | | | | | | There's no need to use a series of over-generalised functions to just wrap a string in a tuple. (From OE-Core rev: 080854fe346a76f5fbe25058ba1b2425a0459b5e) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/buildoptions: set PACKAGE_CLASSES in ↵Ross Burton2022-04-011-1/+6
| | | | | | | | | | | | | test_arch_work_dir_and_export_source test_arch_work_dir_and_export_source uses the archiver to generate SRPMS, so explicitly set PACKAGE_CLASSES to ensure that package_rpm is used. (From OE-Core rev: 030157fa8dd405be60c55523e074b2ec950d36ad) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-05 23:23:32 +0000