summaryrefslogtreecommitdiffstats
path: root/meta/lib/oeqa
Commit message (Collapse)AuthorAgeFilesLines
...
* oeqa selftest wic.py: fix missing ext4 imageMikko Rapeli2024-10-251-0/+4
| | | | | | | | | | | | test_rawcopy_plugin fails if machine does not build ext4 images by default. Make the ext4 image build explicit in the test. Fixes test on genericarm64 machine which defaults to wic image only. (From OE-Core rev: 0344b9e7949ef854b09deb0874a45cde2861f55b) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa selftest wic.py: support UKIs via uki.bbclassMikko Rapeli2024-10-251-12/+108
| | | | | | | | | | | | | | | | | Use label to detect rootfs since UKI with kernel command line is generated before rootfs is generated by wic. Adapt wic tests to build and boot uki.bbclass generated UKIs. Keeping one UKI test in wic.py and rest of the UKI features are tested with dedicated uki.py test. Add plain non-UKI systemd-boot tests to wic suite for aarch64 and x86. (From OE-Core rev: 3f94256b977637d4276f82db7c20b8b5e57b9d86) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa selftest wic.py: add TEST_RUNQEMUPARAMS to runqemuMikko Rapeli2024-10-251-6/+10
| | | | | | | | | | | | | | | | To support "slirp" networking on shared build machines instead of tun/tap devices. Users can set TEST_RUNQEMUPARAMS = "slirp" in their build/conf/local.conf to run selftests using "slirp" networking. The same works for testimage.bbclass and oeqa runtime tests. (From OE-Core rev: 4974ec71367492ce314da63c359ccf99acfca882) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa selftest efibootpartition.py: remove systemd-boot from grub-efi testMikko Rapeli2024-10-251-2/+2
| | | | | | | | | | | The test is actually using grub-efi not systemd-boot so remove it completely. systemd-boot will be tested via uki.py tests. (From OE-Core rev: 542ea853bb194629d23e1db9c05e25181bfce145) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa selftest efibootpartition.py: add TEST_RUNQEMUPARAMS to runqemuMikko Rapeli2024-10-251-3/+4
| | | | | | | | | | | | TEST_RUNQEMUPARAMS variable is used to add runqemu parameters like "slirp" networking. Support this also in selftests so that "slirp" networking can be used instead of the tun/tap devices setup which is easier to work with on shared build machines. (From OE-Core rev: 74e44e63378e1c08bb547a0a04428d88753b5040) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa selftest uki.py: add tests for uki.bbclassMikko Rapeli2024-10-251-0/+142
| | | | | | | | | | | | | Tests builds and boots qemu into uki binary with systemd and sysvinit. Due to depedency to x86 specific ovmf UEFI firmware, tests are specific to x86 curently. UEFI firmware for ARM can be generated via qemuarm64-secureboot machine in meta-arm and similar tests on qemu will pass. (From OE-Core rev: 8a3cb17876dbcaf07696a4bcd454e2f9a444fb1b) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/buildoptions: Use continue option in source mirrors testRichard Purdie2024-10-251-1/+1
| | | | | | | | | It is helpful to see all the issues in the source mirror test so use the continue option. (From OE-Core rev: f52e7ddc6ca5ce03cbcdf3cc15fc04f3ff31cd5c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/rust: remove unused imports or codeRoss Burton2024-10-241-5/+1
| | | | | | | | | Remove unused imports, or disabling code which has been commented out. (From OE-Core rev: e0ff4813b1cf4df0d851c857d57fb88d7db51bdd) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/rust: skip on all MIPS platformsRoss Burton2024-10-241-5/+3
| | | | | | | | | | | | | | | | | | | As per "The rustc book"[1], mips*-unknown-linux-* are "tier 3" targets: Tier 3 targets are those which the Rust codebase has support for, but which the Rust project does not build or test automatically, so they may or may not work. We already skip qemumips in this selftest, but we're now also seeing failures with qemumips64 so refactor the test to skip all machines where the architecture is mips or mips64. [1] https://doc.rust-lang.org/nightly/rustc/platform-support.html (From OE-Core rev: 177e268811c04260923ac4b16fa047315304add0) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust-target-config: Update the data layout for x86-64 targetDeepesh Varatharajan2024-10-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | The data layout for x86-64 target was different in rust from llvm. It resulted in the following data layout error: -------------------------------------------------------------------------------------- error: data-layout for target `x86_64-linux`, `e-m:e-i64:64-f80:128-n8:16:32:64-S128`, differs from LLVM target's `x86_64-unknown-linux-gnu` default layout, `e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-i128:128-f80:128-n8:16:32:64-S128` -------------------------------------------------------------------------------------- The issue was reported in meta-rust layer as: https://github.com/meta-rust/meta-rust/pull/442 Hence, the data layout for x86-64 is modified as per the llvm sources which fixes the issue. After running the testsuite with the modified data layout; it was observed that the "tests/codegen/i128-x86-align.rs" passed. The modified data layout fixed the scalar pair which resolved the testcase failure. Hence, the testcase has been removed from the exclude list. (From OE-Core rev: 96f11d299b32a32086eb3d890c88eb7ce42057b0) Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com> Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/parselogs: Add different PCI BAR errors with qemu 9.1.0Richard Purdie2024-10-221-0/+11
| | | | | | | | | With qemu 9.1.0 we see parselogs failures with mips and mips64. We've long since ignored these errors so update to continue to do so with the new form. (From OE-Core rev: 4f3c299e7a282e953d9adb7549c30015df317171) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/ssh: Fix incorrect timeout fixRichard Purdie2024-10-141-2/+2
| | | | | | | | | I'd meant to change the command timeout in the previous change, fix the correct one. (From OE-Core rev: bb991988cb23be2c8947171726ada321f27e6eed) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemurunner: Clean up serial_lock handlingRichard Purdie2024-10-141-5/+6
| | | | | | | | | | Avoid "RuntimeError: release unlocked lock" since the lock shouldn't be locked even in the error path. Add a try/finally path to ensure this. (From OE-Core rev: b0732ee009ca47580d1d2ad75334f4aa50e6efd5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/cases: add basic barebox testsEnrico Jorns2024-10-111-0/+44
| | | | | | | | | | | | | | | | | | | This adds basic tests for qemuarm and qemuarm64. So far, barebox fails to run properly under KVM for the same reasons u-boot fails to run. A patch series to address the problem was submitted by Ahmad Fatoum after debugging the oe-selftest failures for this series: https://lore.kernel.org/barebox/20241009060511.4121157-1-a.fatoum@pengutronix.de/ For now, simply disable KVM for these tests. (From OE-Core rev: 9284ceb4d32a51c77792d9009bba400d0b17d731) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/cases: add basic u-boot testEnrico Jorns2024-10-111-0/+43
| | | | | | | | | | | | | | | | | | This adds basic tests for qemuarm and qemuarm64. So far, U-Boot fails to run properly under KVM since this requires some special care with instructions used for MMIO accesses. Reported upstream by Ahmad Fatoum after debugging the oe-selftest failures for this series: https://lore.kernel.org/u-boot/2211f9f0-cd7d-4b55-860d-a34c04877e7b@pengutronix.de/ For now, simply disable KVM for these tests. (From OE-Core rev: cadbd937e6358f9811f3ba7cf20cc50f8edcd844) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: support passing custom boot patterns to runqemuEnrico Jorns2024-10-113-5/+7
| | | | | | | | | | | | | This allows defining non-standard patterns from QEMU tests just as they are already supported by the testimage.bbclass. Will allow testing non-Linux shells in QEMU, too (e.g. a U-Boot shell or another bootloader shell). (From OE-Core rev: f9e6c3deee5a4159a09396b625a7327f6c204df5) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/qemurunner: support ignoring vt100 escape sequencesEnrico Jorns2024-10-111-1/+3
| | | | | | | | | | | | | | | | | | | | If we talk to terminals that like colors, we need to ignore the vt100 escape sequences when matching strings. An unprocessed barebox console prompt would e.g. look like: ESC[1;32mbarebox@ESC[1;36mARM QEMU virt64:/ESC[0m where we cannot match for something like "barebox@ARM QEMU virt64:/". The same applies to colored Linux terminal output of course. The "\x1b\[" from the regex catches the standard start of ANSI escape sequence while the rest catches the actual command code executed. (From OE-Core rev: 33bbe4cb040f890121681865fbcf28bc8213a170) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* barebox: add initial supportMarco Felsch2024-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the support for the barebox bootloader to oe-core. The recipe is inspired by meta-ptx [1] but is a major rework of the one found there. Barebox comes with a wide range of supported architectures and follows the concepts of Linux in various aspects like the driver model, the shell, or the virtual file system. This not only eases porting Linux drivers but also makes barebox a developer-friendly and feature-rich bootloader alternative [2]. For barebox (like for the kernel or other bootloaders) it is quite likely that people will not just build the original recipe but need to adapt it, point to custom repositories, apply patch stacks, COMPATIBLE_MACHINE etc. They may also choose to have different recipe names for different variants. Having only a single .bb file and requiring to copy or .bbappend it is inconvenient and results in unnecessary code duplication. Therefore, the base support for building barebox is encapsulated in barebox.bbclass (like kernel.bbclass for the kernel). Adds barebox to maintainers.inc but excludes it from the maintainers check since with the current check mechanism barebox would be skipped (and making the check fail) due to not being the PREFERRED_PROVIDER for virtual/bootloader. [1] https://github.com/pengutronix/meta-ptx/tree/master/recipes-bsp/barebox [2] https://www.barebox.org/demo/?graphic=0 (From OE-Core rev: 5c69f5626278a6e9756188a5771b18075380f52d) Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/ssh: Rework ssh timeoutRichard Purdie2024-10-111-2/+2
| | | | | | | | | | | | | | | | After the changes to improve this test, we keep seeing image testing ssh failures, particularly on mips. It looks like part of the problem is that on a loaded system, 5s is too short for mips to reliably establish an ssh connection. I've seen logs where it keeps timing out and fails to work, then the debug code successfully uses ssh later after everything else fails. Change the timings/retries to give slow platforms enough time to respond. (From OE-Core rev: ba64ccf3ad6e40461219b72d60eb0fe5cb38fddd) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/gcc: Fix kex exchange identification errorHarish Sadineni2024-10-011-0/+2
| | | | | | | | | | | | | | | while runnig oe-selftest for gcc, some of the testcases that need to be run on qemu are not running due to below failures: - kex_exchange_identification: read: Connection reset by peer^M Connection reset by 192.168.7.2 port 22^M ERROR: Couldn't create remote directory /tmp/runtest.3549814 on ssh To resolve kex exchange identification error increased the MaxStartups. (From OE-Core rev: df64d5ab6eb37dcdc2046f449ec539a3f4b985c8) Signed-off-by: Harish Sadineni <Harish.Sadineni@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: drop S = WORKDIR workaroundAdrian Freihofer2024-09-301-5/+0
| | | | | | | | | | | | | | Dropping support for S = WORKDIR allows to drop this ugly workaround. With S = WORKDIR it was possible to refer to a file via oe-local-files symlink or via direct file path. Ensuring the pseudo database is consistent for both paths was extra complicated and required this bad function. Really nice to drop it now! (From OE-Core rev: 2b799fdf267f44c26797593984d9828c4fd0fd31) Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/postactions: Fix archive retrieval from targetMathieu Dubois-Briand2024-09-201-0/+1
| | | | | | | | | | | | | A previous patch broke archive retrieval because of an undeclared variable. Declare the archive_name variable as expected. (From OE-Core rev: 39d78fa53fb98515af6dc72c60017e5335993372) Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com> Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org> CC: Alexis Lothoré <alexis.lothore@bootlin.com> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust: Rust Oe-Selftest Reduce the testcases in exclude listDeepesh Varatharajan2024-09-121-132/+0
| | | | | | | | | | | | | We had previously excluded certain test cases due to failures in earlier versions. However, with the latest version of Rust, many of these test cases are passing. As a result, we have removed them from the exclude list and added them back into the test suite for execution. The rust-1.79 has been successfully tested with the current test inclusions. (From OE-Core rev: e8dae0ee5ea958bb84af33d9b9a29ab357d96e31) Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: Only rewrite envvars paths that absolutely point to builddirYoann Congal2024-09-121-1/+4
| | | | | | | | | | | | | | | | | When building the new selftest builddir, paths in environment variables are rewritten to point to the new buildir, but users can have environment variables that point outside of the build dir using relative paths from builddir. We must not rewrite those. Check this by verifying that the absolute path still contains the builddir. Fixes [YOCTO #15241] (From OE-Core rev: c5e70500caffcd0518899cc6eba23a38bc3be108) Signed-off-by: Yoann Congal <yoann.congal@smile.fr> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-ide-support: Mark recipe as MACHINE-specificPaul Barker2024-09-121-2/+2
| | | | | | | | | | | | | | | | meta-ide-support:do_write_test_data dumps the bitbake data dictionary to a file using export2json(). As this obviously includes the value of MACHINE, and other MACHINE-specific variables, the recipe needs to be marked as MACHINE-specific. RP: Note that this patch does change the name of the environment script since it is no longer package arch specific but machine arch specific. [RP: Fix selftest to reference new environment file] (From OE-Core rev: 3be2bc8a9b0c9d6a178329c8b451a6bedf255d6c) Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* conf/defaultsetup.conf: Drop TCLIBCAPPENDRichard Purdie2024-09-051-15/+0
| | | | | | | | | | | | | | We've been able to run musl and glibc builds in the same TMPDIR for many years and a separate directory is not required. Most distros disable this value for that reason. Drop support for the variable to make it clear and easy for distros to be able to set multiconfigs which behave consistently for distros which do and don't clear it by dropping it entirely. (From OE-Core rev: ebcd355a32e2711263e22d9b45b502696ecbb4d2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testexport: support for executing tests over serialAndrew Oppelt2024-09-012-1/+326
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Uses TEST_SERIALCONTROL_CMD to open a serial connection to the target and execute commands. This is a drop in replacement for the ssh target, fully supporting the same API. Supported with testexport. To use, set the following in local.conf: - TEST_TARGET to "serial" - TEST_SERIALCONTROL_CMD to a shell command or script which connects to the serial console of the target and forwards that connection to standard input/output. - TEST_SERIALCONTROL_EXTRA_ARGS (optional) any parameters that must be passed to the serial control command. - TEST_SERIALCONTROL_PS1 (optional) A regex string representing an empty prompt on the target terminal. Example: "root@target:.*# ". This is used to find an empty shell after each command is run. This field is optional and will default to "root@{MACHINE}:.*# " if no other value is given. - TEST_SERIALCONTROL_CONNECT_TIMEOUT (optional) Specifies the timeout in seconds for the initial connection to the target. Defaults to 10 if no other value is given. The serial target does have some additional limitations over the ssh target. 1. Only supports one "run" command at a time. If two threads attempt to call "run", one will block until it finishes. This is a limitation of the serial link, since two connections cannot be opened at once. 2. For file transfer, the target needs a shell and the base32 program. The file transfer implementation was chosen to be as generic as possible, so it could support as many targets as possible. 3. Transferring files is significantly slower. On a 115200 baud serial connection, the fastest observed speed was 30kbps. This is due to overhead in the implementation due to decisions documented in #2 above. (From OE-Core rev: d817b27d73d29ba2beffa2e0a4e31a14dbe0f1bf) Signed-off-by: Andrew Oppelt <andrew.j.oppelt@boeing.com> Signed-off-by: Matthew Weber <matthew.l.weber3@boeing.com> Signed-off-by: Chuck Wolber <chuck.wolber@boeing.com> -- Tested with core-image-sato on real hardware. TEST_SERIALCONTROL_CMD was set to a bash script which connected with telnet to the target. Additionally tested with QEMU by setting TEST_SERIALCONTROL_CMD to "ssh -o StrictHostKeyChecking=no root@192.168.7.2". This imitates a serial connection to the QEMU instance. Steps: 1) Set the following in local.conf: - IMAGE_CLASSES += "testexport" - TEST_TARGET = "serial" - TEST_SERIALCONTROL_CMD="ssh -o StrictHostKeyChecking=no root@192.168.7.2" 2) Build an image - bitbake core-image-sato 3) Run the test export - bitbake -c testexport core-image-sato 4) Run the image in qemu - runqemu nographic core-image-sato 5) Navigate to the test export directory 6) Run the exported tests with target-type set to serial - ./oe-test runtime --test-data-file ./data/testdata.json --packages-manifest ./data/manifest --debug --target-type serial Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/bbclasses: Add tests for systemd and update-rc.d interactionPeter Kjellerstedt2024-09-011-0/+106
| | | | | | | | | | | These tests verify that the correct files are left behind when systemd is inherited and depending on whether the systemd and/or sysvinit distro features are enabled. (From OE-Core rev: 4ef25caa00ad08046567d0e7f4523486c3a256d0) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust: Oe-selftest changes for rust v1.79Yash Shinde2024-08-291-88/+82
| | | | | | | | | | | | | | | | | | | | | | | | * Sort the exclude list in alphabetical order. * Add some of the upsupported/failing tests to the exclude list and ignore the failing unit tests. * Remove duplicated tests from the exclude list. * Testing summary Target PASS SKIPPED ARM 17241 599 ARM64 17279 561 MIPS64 17228 612 PPC 17194 629 X86 17257 583 X86-64 17416 424 (From OE-Core rev: 61ec0f0f78d9db4c3fc02365713d5fd77b78a7ea) Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/sstatetests: Extend to cover ERROR_QA/WARN_QA common issuesRichard Purdie2024-08-291-0/+2
| | | | | | | | | Now that adding new values to ERROR_QA doesn't invalidate tasks, add this check to the selftests so that this functionality doens't regress in future. (From OE-Core rev: 823b5f6cf64ad37ee68e6274c58823f7cc75ddf0) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* hicolor-icon-theme: upgrade 0.17 -> 0.18Alexander Kanavin2024-08-281-2/+2
| | | | | | | (From OE-Core rev: 7ca759f98a46d9fcf485edc3eeff4e9cf73a4669) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: use INIT_MANAGER to enable systemd instead of custom settingsAlexander Kanavin2024-08-282-10/+2
| | | | | | | | | | | | This is already done in most of selftest; these two were the last holdouts I could fine. Hopefully this improves sstate reuse as well. (From OE-Core rev: 98f2feeea8f54f899e831a13191578b94cde7670) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: always tweak ERROR_QA/WARN_QA per packageAlexander Kanavin2024-08-282-6/+6
| | | | | | | | | | Globally changing it completely destroys sstate reuse, as seen for example here: https://autobuilder.yoctoproject.org/typhoon/#/builders/127/builds/3763/steps/14/logs/stdio (From OE-Core rev: 9c75c11f4f6816cfc56eb85a43859a228a5d2950) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipetool: create: split guess_license functionEnguerrand de Ribaucourt2024-08-231-0/+1
| | | | | | | | | | | | | | | The npm recipetool handler redefines the license code the could be unified. In order to do this refactoring, extract the bits we'll need into separate functions. guess_license() is renamed to find_licenses() and is split into find_license_files() and match_licenses(). (From OE-Core rev: f1ec28feaea8ea6a2df894dd4ddba561c8a04ed2) Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kmod: upgrade 32 -> 33Alexander Kanavin2024-08-231-4/+4
| | | | | | | | | | | | | Disable manpages, as they require scdoc, which is not currently available in core (and adjust a related selftest). Drop 0001-Use-portable-implementation-for-basename-API.patch as upstream fixed the issue differently. (From OE-Core rev: f868b75ab22cd528d9add744042f13d475715ef4) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/ssh: increase the number of attemptsJon Mason2024-08-221-1/+1
| | | | | | | | | | | Under high load, the ssh test is hitting the amount of retries. Increase it to 20 to avoid this issue. This would increase the maximum failure time from 50 seconds (5 * 10) to 100 seconds. (From OE-Core rev: c796438eec5dd6b4671b798f85506bc89ff402ab) Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* license_image.bbclass: Rename license-incompatible to license-exceptionPeter Kjellerstedt2024-08-211-1/+1
| | | | | | | | | | | | | | | | There is currently both an incompatible-license and a license-incompatible QA message. This is very confusing. However, license-incompatible is only used to output a message when a package is included in an image despite it having a license that is normally incompatible (by using the INCOMPATIBLE_LICENSE_EXCEPTIONS variable). To better match how it is used and to distinguish it from incompatible-license, rename it to license-exception. (From OE-Core rev: d309eed66f5a4a4bce082536e51207fe65725fab) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: add test_product_matchMarta Rybczynska2024-08-201-0/+48
| | | | | | | | | CVECheck.test_product_match tests has_cve_product_match() (From OE-Core rev: 30ee6edc57ff7629a72606d1005f92d43a5d14f9) Signed-off-by: Marta Rybczynska <marta.rybczynska@syslinbit.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve_check: Update selftest with new status detailSamantha Jalabert2024-08-201-1/+2
| | | | | | | | (From OE-Core rev: ea7681ffc15cac970c395daab56ba264ac406cd6) Signed-off-by: Samantha Jalabert <samantha.jalabert@syslinbit.com> Signed-off-by: Marta Rybczynska <marta.rybczynska@syslinbit.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust: Oe-selftest changes for rust v1.78Yash Shinde2024-08-201-1/+33
| | | | | | | | | | Add some of the upsupported/failing tests to the exclude list and ignore the failing unit tests. (From OE-Core rev: 81bbd6db47f45628ff4be400e1f2fa5b09ccd0bb) Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/postactions: do not uncompress retrieved archive on hostAlexis Lothoré2024-08-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | Current postaction module executes a remote tar command, pipe it in a SSH connection, and uncompress the raw stream with another tar command. With this command, the whole artifacts tree is directly available on the host executing the test, but it is not very convenient if we want to download the whole retrieved ptests directory. Stop uncompressing the retrieved ptests archive onto host, just save the archive as it is. The new output then looks like the following: tmp/log/oeqa-artefacts └── oeqa-target-artefacts-20240812-juzqdb80 ├── host_disk_usage.txt ├── target_disk_usage.txt └── tests_artifacts.tar.gz Suggested-By: Alexandre Belloni <alexandre.belloni@bootlin.com> (From OE-Core rev: f90894d996c8a8f980e46c87b7968b176793b3fe) Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/postactions: fix exception handlingAlexis Lothoré2024-08-131-1/+1
| | | | | | | | | | | | | | | The current exception handler in list_and_fetch_failed_tests_artifacts expects a non-exisiting variable and then fail to display the original exception message since it raises a new one. The issue has been introduced with commit 6e80b2ab660e ("oeqa/utils/postactions: transfer whole archive over ssh instead of doing individual copies"). Now that tests artifacts are now handled individually, there's no point of trying to print individual names in the exception. (From OE-Core rev: a50e72bb64fb8b0d14c23164eaeeabd9c271ac19) Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/gcc: Fix host key verfication failureHarish Sadineni2024-08-131-1/+1
| | | | | | | | | | | | | | | | | | while runnig oe-selftest for gcc, testcases that need to be run on qemu are not running due to below failures. - Executing on ssh: mkdir -p /tmp/runtest.3549641 (timeout = 300) spawn [open ...] Host key verification failed. ERROR: Couldn't create remote directory /tmp/runtest.3549641 on ssh Host key verification failure is happening when ssh board config file name is defined as "ssh.exp" and there are multiple ssh.exp files generated during the build and a wrong ssh config was taken. To resolve this changed the board config file name to "linux-ssh.exp" which ensures correct ssh settings are used. (From OE-Core rev: d32ec0b4d242879ab8eaf96e1cb407e8f0bb9f3d) Signed-off-by: Harish Sadineni <Harish.Sadineni@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust: Upgrade 1.75.0->1.76.0Yash Shinde2024-08-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | * Drop "--doc" option for rust oe-selftest since it is not supported on bootstrap builds for cross-targets. * Drop the following backported patches which are merged with rust v1.76 upgrade. - custom-target-cfg.patch - rustc-bootstrap.patch - rv32-missing-syscalls.patch - target-build-value.patch https://blog.rust-lang.org/2024/02/08/Rust-1.76.0.html * Drop 'rust-rustdoc' and 'rust-dbg' from 'exclude_packages' list to check for rust reproducibility. (From OE-Core rev: 71d17ed3c7be029fc68e9dd3f5d6c4aa72ef861a) Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust: Oe-selftest fixes for rust v1.76Yash Shinde2024-08-091-0/+19
| | | | | | | | | | Add the failing tests in rust v1.76 to the exclude list and add "ignore" tags to ignore failing unit test cases. (From OE-Core rev: 75399802515ac423503e637281a4585dd00d7c75) Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/parselogs: mips: skip sysctl warningBruce Ashfield2024-08-071-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream has shuffled the sysctl registration via the commit: commit d4ae80ffa64f87b9c355692b680b603add084e96 Author: Zhen Ni <nizhen@uniontech.com> Date: Tue Feb 15 19:46:03 2022 +0800 sched: Move cfs_bandwidth_slice sysctls to fair.c move cfs_bandwidth_slice sysctls to fair.c and use the new register_sysctl_init() to register the sysctl interface. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> The way that we have to configure our mips qemu platforms results in an empty sysctl table registration and the following harmless warnings: "failed when register_sysctl_sz sched_fair_sysctls to kernel" "failed when register_sysctl_sz sched_core_sysctls to kernel" Adding them to our list of acceptable dmesg warnings. (From OE-Core rev: 4cf678858ef6f2c3310ad8f26cac3e7e133d4f0a) Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/parselogs: update pci BAR ignore for kernel 6.10Bruce Ashfield2024-08-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The format of the pci BAR warnings we get on qemu boots has changed in 6.10+ via the following kernel commit: commit dc4e6f21c3f844ebc1c52b6920b8ec5dfc73f4e8 Author: Puranjay Mohan <puranjay@kernel.org> Date: Sat Nov 6 16:56:06 2021 +0530 PCI: Use resource names in PCI log messages Use the pci_resource_name() to get the name of the resource and use it while printing log messages. [bhelgaas: rename to match struct resource * names, also use names in other BAR messages] Link: https://lore.kernel.org/r/20211106112606.192563-3-puranjay12@gmail.com Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Since it doesn't appear that we can do regex's in parselogs and the bar number is now in the middle of the message, we go with a slightly wider format of the message to ignore. (From OE-Core rev: 0a7126604b6536868600d43aff000a426384995c) Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool/upgrade: rename RECIPE_UPDATE_EXTRA_TASKS -> RECIPE_UPGRADE_EXTRA_TASKSAlexander Kanavin2024-08-031-1/+1
| | | | | | | | | | 'UPDATE' as a name is somewhat unfortunate as the variable is intended only for the 'devtool upgrade' operation and devtool also has an 'update-recipe' operation. (From OE-Core rev: 4467aa0661e233f44c4ce029428c67d88fccfc07) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes: add new retain class for retaining build resultsPaul Eggleton2024-08-031-0/+241
| | | | | | | | | | | | | | | | | | | | If you are running your builds inside an environment where you don't have access to the build tree (e.g. an autobuilder where you can only download final artifacts such as images), then debugging build failures can be difficult - you can't examine log files, the source tree or output files. When enabled, by default this class will retain the work directory for any recipe that has a task failure in the form of a tarball, and can also be configured to save other directories on failure or always. It puts these tarballs in a configurable location (${TMPDIR}/retained by default), where they can be picked up by a separate process and made available as downloadable artifacts. (From OE-Core rev: e2030c0d747eb990b9ad10098c6b74d6f8f4e74e) Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust: rustdoc reproducibility issue fixSundeep KOKKONDA2024-07-301-2/+0
| | | | | | | | | | | | | | The 'codegen-units' option split the crate into multiple compilation units for parallel compilation. Currently, this split is causing the rustdoc to generate differnt binary between the builds. To fix this the codegen-units & the lto options are disabled. More info about options: https://doc.rust-lang.org/cargo/reference/profiles.html#codegen-units https://doc.rust-lang.org/rustc/codegen-options/index.html#lto (From OE-Core rev: 0c00875de10b171f4ff2990af351a8124ec7e972) Signed-off-by: Sundeep KOKKONDA <sundeep.kokkonda@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-07 09:55:32 +0000