summaryrefslogtreecommitdiffstats
path: root/meta/lib/oeqa
Commit message (Collapse)AuthorAgeFilesLines
...
* oeqa/selftest/rust: Various fixes to work correctlyRichard Purdie2023-07-191-11/+16
| | | | | | | | | | | | | | | | | | * Ensure the test/class naming doesn't allow the to be triggered without the toolchain decorator * Add the toolchain-user decorator so it runs on non-IA targets * Strip the leading "[XX] " prefix from the test names * Ensure skipped test counts are passed through correctly (as SKIPPED, not SKIP) * Avoid duplicate test results and show a warning if any are found (duplicates were from other sources in the end but the code remains sensible to have) (From OE-Core rev: b1718ce5b2b2db35a8e1c88087deee41f99094b4) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: Add rust selftestsYash Shinde2023-07-191-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch implements Rust testing framework similar to other selftest, specifically the gcc selftest in OE. It uses the client and server based method to test the binaries for cross-target on the image. The test framework is a wrapper around the Rust build system as ./x.py test. It tests many functionalities of Rust distribution like tools, documentation, libraries, packages, tools, Cargo, Crater etc. Please refer the following link for detailed description of Rust testing:- https://rustc-dev-guide.rust-lang.org/tests/intro.html#tool-tests To support the rust tests in oe-core, the following functions were added:- setup_cargo_environment(): Build bootstrap and some early stage tools. do_rust_setup_snapshot(): Install the snapshot version of rust binaries. do_configure(): To generate config.toml do_compile(): To build "remote-test-server" for qemu target image. Approximate Number of Tests Run in the Rust Testsuite :- 18000 Approximate Number of Tests that FAIL in bitbake environment :- 100-150 Normally majority of the testcases are present in major folder "test/" It contributes to more than 80% of the testcases present in Rust test framework. These tests pass as expected on any Rust versions without much fuss. The tests that fail are of less important and contribute to less than 2% of the total testcases. These minor tests are observed to work on some versions and fail on others. They have to be added, ignored or excluded for different versions as per the behavior. These tests have been ignored or excluded in the Rust selftest environment to generate success of completing the testsuite. These tests work in parallel mode even in the skipped test mode as expected. Although the patch to disable tests is large, it is very simple in that it only disables tests. When updating to a newer version of Rust, the patch can usually be ported in a day. Tested for X86, X86-64, ARM, ARM64 and MIPS64 on Ubuntu 22.04. (From OE-Core rev: 7c3346d8fbe85302b605bb3f772b029ea7bfaa6c) Signed-off-by: pgowda <pgowda.cve@gmail.com> Signed-off-by: Vinay Kumar <vinay.m.engg@gmail.com> Signed-off-by: Yash Shinde <yashinde145@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/devtool: add unit test for "devtool add -b"Yoann Congal2023-07-101-0/+32
| | | | | | | | | | Fix [Yocto #15085] Co-authored-by: Fawzi KHABER <fawzi.khaber@smile.fr> (From OE-Core rev: d5eedf8ca689ccb433c2f5d0b324378f966dd627) Signed-off-by: Yoann Congal <yoann.congal@smile.fr> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/cases/rpm: fix wait_for_no_process_for_user failure caseRoss Burton2023-07-101-2/+2
| | | | | | | | | | | | str.format() doesn't use % notation, update the formatting to work. assertTrue() is a member of self not a global, and assertTrue(True) will always pass. Change this to just self.fail() as this is the failure case. (From OE-Core rev: 017f3a0b1265c1a3b69c20bdb56bbf446111977e) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image-artifact-names: include ${IMAGE_NAME_SUFFIX} directly in both ↵Martin Jansa2023-06-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ${IMAGE_NAME} and ${IMAGE_LINK_NAME} * ${IMAGE_NAME}${IMAGE_NAME_SUFFIX} is almost always used together already and when they aren't it's usually because of hardcoded '.rootfs' suffix * it's a bit strange, because ${IMAGE_NAME_SUFFIX} is applied after the version from ${IMAGE_VERSION_SUFFIX}, if we move it to ${IMAGE_LINK_NAME} then it will be applied before the version and ${IMAGE_LINK_NAME} will be just the version-less symlink to latest built version. * it's not added to INITRAMFS_IMAGE_NAME as it assumes that all images used as initramfs will set IMAGE_NAME_SUFFIX to empty. Many already do as shown bellow, but you might need to extend this list in your layer. * this also allows to drop support for imgsuffix varflag, recipes which don't want to have .rootfs suffix can just set IMAGE_NAME_SUFFIX to empty and it will be consistently respected by both IMAGE_NAME and IMAGE_LINK_NAME * imgsuffix = d.getVarFlag("do_" + taskname, 'imgsuffix') or d.expand("${IMAGE_NAME_SUFFIX}.") is kind of terrible, notice trailing '.' after ${IMAGE_NAME_SUFFIX} while this dot was in imgsuffix in: do_bootimg[imgsuffix] = "." but in both cases it's not really part of the imgsuffix, but the "extension" type separator as in dst variable: dst = os.path.join(deploy_dir, link_name + "." + type) - src = img_name + imgsuffix + type + src = img_name + "." + type * for ubifs volumes move vname after IMAGE_NAME_SUFFIX * to better document these changes here is an example with default poky configuration with just: IMAGE_FSTYPES:append:pn-core-image-minimal = " live wic wic.vmdk ubi" MKUBIFS_ARGS = "-m 2048 -e 129024 -c 968 -x zlib" UBINIZE_ARGS = "-m 2048 -p 131072 -s 512" added in local.conf, so that deploy_dir has also some initramfs and more IMAGE_FSTYPES * "ls -lahi tmp/deploy/images/qemux86-64/" output after "bitbake core-image-minimal" And deploy-dir is cleaned between runs with: bitbake -c clean core-image-minimal core-image-minimal-initramfs virtual/kernel grub-efi systemd-boot The output confirms that the only change is ".rootfs" added not only in ext4 and manifest files, but also for hddimg, iso, qemuboot.conf testdata.json for both the actual artifacts as well as the symlinks while core-image-minimal-initramfs doesn't have them as IMAGE_NAME_SUFFIX was already set to empty there: meta/classes-recipe/baremetal-image.bbclass:IMAGE_NAME_SUFFIX ?= "" meta/recipes-core/images/core-image-minimal-initramfs.bb:IMAGE_NAME_SUFFIX ?= "" meta/recipes-core/images/core-image-tiny-initramfs.bb:IMAGE_NAME_SUFFIX ?= "" meta/recipes-extended/baremetal-example/baremetal-helloworld_git.bb:IMAGE_NAME_SUFFIX ?= "" meta/recipes-extended/images/core-image-testcontroller-initramfs.bb:IMAGE_NAME_SUFFIX ?= "" before these changes: total 297M 31269162 drwxr-xr-x 2 martin martin 4.0K Mar 7 19:19 . 31263942 drwxr-xr-x 3 martin martin 4.0K Mar 7 12:53 .. 35845703 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 35845704 -rw-r--r-- 2 martin martin 11M Mar 7 12:27 bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 35845702 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage-qemux86-64.bin -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 40236967 -rw-r--r-- 2 martin martin 13M Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.cpio.gz 40203232 -rw-r--r-- 2 martin martin 1.1K Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.manifest 40212700 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.qemuboot.conf 40211556 -rw-r--r-- 2 martin martin 211K Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.testdata.json 40236964 lrwxrwxrwx 2 martin martin 62 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.cpio.gz -> core-image-minimal-initramfs-qemux86-64-20230307181808.cpio.gz 40203235 lrwxrwxrwx 2 martin martin 63 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.manifest -> core-image-minimal-initramfs-qemux86-64-20230307181808.manifest 40212690 lrwxrwxrwx 2 martin martin 68 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.qemuboot.conf -> core-image-minimal-initramfs-qemux86-64-20230307181808.qemuboot.conf 40211560 lrwxrwxrwx 2 martin martin 68 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.testdata.json -> core-image-minimal-initramfs-qemux86-64-20230307181808.testdata.json 40237307 -rw-r--r-- 2 martin martin 57M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.hddimg 40237329 -rw-r--r-- 2 martin martin 56M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.iso 40220347 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.qemuboot.conf 40236942 -rw-r--r-- 2 martin martin 34M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.ext4 40211563 -rw-r--r-- 2 martin martin 1.2K Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.manifest 40237206 -rw-r--r-- 2 martin martin 16M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.tar.bz2 40237216 -rw-r--r-- 2 martin martin 20M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.ubi 40224358 -rw-r--r-- 2 martin martin 19M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.ubifs 40360386 -rw-r--r-- 2 martin martin 73M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.wic 40237285 -rw-r--r-- 2 martin martin 35M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.wic.vmdk 40209866 -rw-r--r-- 2 martin martin 206K Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.testdata.json 40236946 lrwxrwxrwx 2 martin martin 56 Mar 7 19:19 core-image-minimal-qemux86-64.ext4 -> core-image-minimal-qemux86-64-20230307181808.rootfs.ext4 40237336 lrwxrwxrwx 2 martin martin 51 Mar 7 19:19 core-image-minimal-qemux86-64.hddimg -> core-image-minimal-qemux86-64-20230307181808.hddimg 40237337 lrwxrwxrwx 2 martin martin 48 Mar 7 19:19 core-image-minimal-qemux86-64.iso -> core-image-minimal-qemux86-64-20230307181808.iso 40211564 lrwxrwxrwx 2 martin martin 60 Mar 7 19:19 core-image-minimal-qemux86-64.manifest -> core-image-minimal-qemux86-64-20230307181808.rootfs.manifest 40220348 lrwxrwxrwx 2 martin martin 58 Mar 7 19:19 core-image-minimal-qemux86-64.qemuboot.conf -> core-image-minimal-qemux86-64-20230307181808.qemuboot.conf 40237205 lrwxrwxrwx 2 martin martin 59 Mar 7 19:19 core-image-minimal-qemux86-64.tar.bz2 -> core-image-minimal-qemux86-64-20230307181808.rootfs.tar.bz2 40209873 lrwxrwxrwx 2 martin martin 58 Mar 7 19:19 core-image-minimal-qemux86-64.testdata.json -> core-image-minimal-qemux86-64-20230307181808.testdata.json 40237217 lrwxrwxrwx 2 martin martin 55 Mar 7 19:19 core-image-minimal-qemux86-64.ubi -> core-image-minimal-qemux86-64-20230307181808.rootfs.ubi 40236771 lrwxrwxrwx 2 martin martin 57 Mar 7 19:19 core-image-minimal-qemux86-64.ubifs -> core-image-minimal-qemux86-64-20230307181808.rootfs.ubifs 40237287 lrwxrwxrwx 2 martin martin 55 Mar 7 19:19 core-image-minimal-qemux86-64.wic -> core-image-minimal-qemux86-64-20230307181808.rootfs.wic 40237286 lrwxrwxrwx 2 martin martin 60 Mar 7 19:19 core-image-minimal-qemux86-64.wic.vmdk -> core-image-minimal-qemux86-64-20230307181808.rootfs.wic.vmdk 40237192 -rw-r--r-- 2 martin martin 3.8K Mar 7 19:19 core-image-minimal.env 34458377 -rw-r--r-- 2 martin martin 616K Mar 7 17:55 grub-efi-bootx64.efi 34963606 -rwxr-xr-x 2 martin martin 103K Mar 6 22:02 linuxx64.efi.stub 35845662 -rw-r--r-- 2 martin martin 8.2M Mar 7 12:27 modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz 35845701 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 modules-qemux86-64.tgz -> modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz 34963605 -rwxr-xr-x 2 martin martin 140K Mar 6 22:02 systemd-bootx64.efi 27651415 -rw-r--r-- 2 martin martin 274 Mar 7 19:19 ubinize-core-image-minimal-qemux86-64-20230307181808.cfg after these changes: total 297M 31269162 drwxr-xr-x 2 martin martin 4.0K Mar 7 19:16 . 31263942 drwxr-xr-x 3 martin martin 4.0K Mar 7 12:53 .. 39479266 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 39479267 -rw-r--r-- 2 martin martin 11M Mar 7 12:27 bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 39479264 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage-qemux86-64.bin -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin 39648810 -rw-r--r-- 2 martin martin 13M Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.cpio.gz 39638400 -rw-r--r-- 2 martin martin 1.1K Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.manifest 39644650 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.qemuboot.conf 39637657 -rw-r--r-- 2 martin martin 211K Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.testdata.json 39648091 lrwxrwxrwx 2 martin martin 62 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.cpio.gz -> core-image-minimal-initramfs-qemux86-64-20230307181456.cpio.gz 39638401 lrwxrwxrwx 2 martin martin 63 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.manifest -> core-image-minimal-initramfs-qemux86-64-20230307181456.manifest 39644651 lrwxrwxrwx 2 martin martin 68 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.qemuboot.conf -> core-image-minimal-initramfs-qemux86-64-20230307181456.qemuboot.conf 39637662 lrwxrwxrwx 2 martin martin 68 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.testdata.json -> core-image-minimal-initramfs-qemux86-64-20230307181456.testdata.json 39654281 -rw-r--r-- 2 martin martin 34M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.ext4 39656710 -rw-r--r-- 2 martin martin 57M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.hddimg 39657112 -rw-r--r-- 2 martin martin 56M Mar 7 19:16 core-image-minimal-qemux86-64.rootfs-20230307181456.iso 39645313 -rw-r--r-- 2 martin martin 1.2K Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.manifest 39646013 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.qemuboot.conf 39656336 -rw-r--r-- 2 martin martin 16M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.tar.bz2 39644408 -rw-r--r-- 2 martin martin 206K Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.testdata.json 39656583 -rw-r--r-- 2 martin martin 20M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.ubi 39654124 -rw-r--r-- 2 martin martin 19M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.ubifs 39802371 -rw-r--r-- 2 martin martin 73M Mar 7 19:16 core-image-minimal-qemux86-64.rootfs-20230307181456.wic 39657113 -rw-r--r-- 2 martin martin 35M Mar 7 19:16 core-image-minimal-qemux86-64.rootfs-20230307181456.wic.vmdk 39654412 lrwxrwxrwx 2 martin martin 56 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.ext4 -> core-image-minimal-qemux86-64.rootfs-20230307181456.ext4 39657167 lrwxrwxrwx 2 martin martin 58 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.hddimg -> core-image-minimal-qemux86-64.rootfs-20230307181456.hddimg 39657168 lrwxrwxrwx 2 martin martin 55 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.iso -> core-image-minimal-qemux86-64.rootfs-20230307181456.iso 39645316 lrwxrwxrwx 2 martin martin 60 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.manifest -> core-image-minimal-qemux86-64.rootfs-20230307181456.manifest 39646014 lrwxrwxrwx 2 martin martin 65 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.qemuboot.conf -> core-image-minimal-qemux86-64.rootfs-20230307181456.qemuboot.conf 39656315 lrwxrwxrwx 2 martin martin 59 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.tar.bz2 -> core-image-minimal-qemux86-64.rootfs-20230307181456.tar.bz2 39644406 lrwxrwxrwx 2 martin martin 65 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.testdata.json -> core-image-minimal-qemux86-64.rootfs-20230307181456.testdata.json 39656584 lrwxrwxrwx 2 martin martin 55 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.ubi -> core-image-minimal-qemux86-64.rootfs-20230307181456.ubi 39654775 lrwxrwxrwx 2 martin martin 57 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.ubifs -> core-image-minimal-qemux86-64.rootfs-20230307181456.ubifs 39657126 lrwxrwxrwx 2 martin martin 55 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.wic -> core-image-minimal-qemux86-64.rootfs-20230307181456.wic 39657088 lrwxrwxrwx 2 martin martin 60 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.wic.vmdk -> core-image-minimal-qemux86-64.rootfs-20230307181456.wic.vmdk 39654418 -rw-r--r-- 2 martin martin 3.8K Mar 7 19:15 core-image-minimal.env 39475732 -rw-r--r-- 2 martin martin 616K Mar 7 17:55 grub-efi-bootx64.efi 31507074 -rwxr-xr-x 2 martin martin 103K Mar 6 22:02 linuxx64.efi.stub 39479261 -rw-r--r-- 2 martin martin 8.2M Mar 7 12:27 modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz 39479263 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 modules-qemux86-64.tgz -> modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz 31507058 -rwxr-xr-x 2 martin martin 140K Mar 6 22:02 systemd-bootx64.efi 27651415 -rw-r--r-- 2 martin martin 274 Mar 7 19:15 ubinize-core-image-minimal-qemux86-64.rootfs-20230307181456.cfg [YOCTO #12937] (From OE-Core rev: 26d97acc71379ab6702fa54a23b6542a3f51779c) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage/oeqa: Drop testimage_dump_host functionalityThomas Roos2023-06-295-50/+6
| | | | | | | | | | | | | | | | | The intent behind these functions was to dump the system state when issues occured but it has never really worked as we'd planned. Regular monitoring as the build runs has largely replaced this as that allows a trend to be seen rather than a spot value which was never really useful. The code is bitrotting and not functioning correctly so drop it. [YOCTO #13872] RP: Reword commit message (From OE-Core rev: dea37ba49a236029da73d5cfbfc069bffc38b508) Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libproxy: update 0.4.18 -> 0.5.2Alexander Kanavin2023-06-271-1/+2
| | | | | | | | | | | | | | | License-update: formatting, years Upstream has completely overhauled the build system (cmake -> meson) and available options. Add the most important ones that require external dependencies; there's plenty more if someone finds them useful. (From OE-Core rev: bbcfef76c3d412f1a79c77f8712aff36190bf7fa) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: removeRoss Burton2023-06-271-1/+1
| | | | | | | | | | | The replacement cve-update-nvd2-native is working, so we can remove the old recipe now. (From OE-Core rev: 17eb07885147a06bf7bdd43f7869fe4411be80a0) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: Improve patch-status layer filteringRichard Purdie2023-06-202-0/+2
| | | | | | | | | | Now that we have layer overrides, we can easily enable patch-status in ERROR_QA without the hardcoded code making it easier for other layers to opt into the checks. (From OE-Core rev: 61a881fdbe8b5a21c6276b8a5d06cc30486b1eb3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/target/ssh: update options for SCPAlexis Lothoré2023-06-171-1/+4
| | | | | | | | | | By default scp expects files. Passing -r option allows to copy directories too (From OE-Core rev: f22e5af0c5f185463c6f4a7fd7f1376c7f22a4da) Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/core/runner: add helper to know about expected failuresAlexis Lothoré2023-06-171-0/+4
| | | | | | | | | | | | | | | | | | Testing framework currently uses the unittest.expectedFailure decorator for tests that can have intermittent failures (see PTEST_EXPECT_FAILURE = "1") in core-image-ptest.bb. While it allows upper layers to run tests without failing on "fragile" tests, it prevents those from knowing more about those failing tests since they are not accounting as failures (for example we could want to retrieve some logs about failed tests to improve them, and eventually to drop expectFailure decorator) Add a helper to allow upper layers to know about those failures which won't make global testing session (From OE-Core rev: 34595858b14f628a8282777b91c841add6ebe1ca) Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/reproducible: Allow chose the package managerJose Quaresma2023-06-171-1/+5
| | | | | | | | | | This is a follow-up of 76e5fcb2 that also allow users to chose the package manager using OEQA_REPRODUCIBLE_TEST_PACKAGE (From OE-Core rev: 3d414d85b44077bac57aba36707b0fc699a73e97) Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/logparser: Fix ptest No-section exceptionRichard Purdie2023-06-171-1/+4
| | | | | | | | | | | | | | | | | | | | | Occasionally we see: File "/media/build/poky/meta/lib/oeqa/runtime/cases/ptest.py", line 27, in test_ptestrunner_expectfail self.do_ptestrunner() File "/media/build/poky/meta/lib/oeqa/runtime/cases/ptest.py", line 77, in do_ptestrunner results, sections = parser.parse(ptest_runner_log) File "/media/build/poky/meta/lib/oeqa/utils/logparser.py", line 80, in parse self.results[current_section['name']][result.group(1).strip()] = t KeyError: 'No-section' which occurs when there are "results" outside the main log section. The strace tests do then upon failure as they dump logs there. Add code to avoid the tracebacks and just make them warnings. (From OE-Core rev: d9bf95d8cfb123f9d992fd2a95099bdcece97be8) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/oescripts: Fix qemu-helper selftestRichard Purdie2023-06-171-2/+2
| | | | | | | | | | The updated selftest was assuming qemu-bridge-helper was available on the host system which isn't always the case. Tweak the test case to avoid this issue by adding dedicated help output and checking for this specifically. (From OE-Core rev: 4a80e95d1f59e0ddcedde3f64d0a0d1dc48a6e4d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqemu/qemu-helper: Drop tunctlRichard Purdie2023-06-161-2/+2
| | | | | | | | | | | ip tuntap provides the functionality that we obtained from tunctl. We only needed tunctl when ifconfig was more available than ip. That isn't the case now so we can drop tunctl and all the hoops we need to jump through to build and provide it. (From OE-Core rev: 2abfbca690ff00cb58ce08a65cde006578ee3de9) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest reproducible.py: support different build targetsMikko Rapeli2023-06-151-2/+6
| | | | | | | | | | | | | | | | | Allow users to set different build reproducibility targets than the defaults using OEQA_REPRODUCIBLE_TEST_TARGET and OEQA_REPRODUCIBLE_TEST_SSTATE_TARGETS variables in local.conf. Fixing all issues from "world" builds is not possible in some complex build environments with lots of layers. Limiting the focus to a smaller subset allows using this test to detect and fix build reproduction issues incrementally. (From OE-Core rev: c66bebbce5995e386a1a4d055a914a39b6ee518d) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/bbtests: add non-existent prefile/postfile testsFabien Mahot2023-06-151-0/+8
| | | | | | | | | | Fixes [YOCTO #10725] (From OE-Core rev: b0c33655fad5b2e7d96a45b6210527dfb766797b) Signed-off-by: Fabien Mahot <fabien.mahot@smile.fr> Reviewed-by: Yoann Congal <yoann.congal@smile.fr> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/reproducible: Allow native/cross reuse in testRichard Purdie2023-06-071-2/+2
| | | | | | | | | | | | We don't compare reproducibility of the native/cross components, only the target ones. With the long build times of rust-native, the test now takes crazy lengths of time so this tweak should allow us to reuse native/cross artefacts from sstate whilst still testing the target output is reproducible. (From OE-Core rev: b494d83c639a877cefeb7cbab6d37195e492f059) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemurunner.py: fix error message about qmpChen Qi2023-06-061-2/+2
| | | | | | | | | | | | The error message is a little misleading as the qmp module is a directory with __init__.py file, not qmp.py file. Also, put the path where we try to import it from in the error message to make the message more indicative. (From OE-Core rev: 08bacbf797f6a50ae8abe8fc3455b3a15a0a94b3) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/wic: Fix host contamination issueRichard Purdie2023-06-061-3/+5
| | | | | | | | | | If wic.Wic2.test_gpt_partition_name is run on a system without sfdisk, the test will currently fail. As done in another test, it needs to use sfdisk from the wic-tools sysroot. This patch fixes that host contamination issue. (From OE-Core rev: 6f9200cc30d50888b9b63103824880abaf8b5eea) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/sstatetests: Add easier debug optionRichard Purdie2023-06-021-0/+7
| | | | | | | | | | In order to debug these selftest failures you end up having to comment out the file cleanup. Make this an option at the top of the file to make it a bit easier, I've had to do this too many times now. (From OE-Core rev: ae69d48b0e5b58b18553a6b3cd03ffbd3f369aa3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/incompatible_lic: Ensure create_sdpx isn't used with the testsRichard Purdie2023-06-022-0/+9
| | | | | | | | | | | The SPDX class doens't get on well with non-standard licenses. Disable it for the purposes of this test to avoid errors. Add a new helper function to the core test code to allow this to be done easily. (From OE-Core rev: b9fb4c68f2ab5becb0a10418884e09dee93cd247) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: wic.py respect IMAGE_LINK_NAMEMartin Jansa2023-05-291-4/+5
| | | | | | | | | | | | * use IMAGE_LINK_NAME instead of hardcoding core-image-minimal-${MACHINE} assumption [YOCTO #12937] (From OE-Core rev: e34d7617b00ec9423221c9c7b96be6f9e5358e6a) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/cases/devtool.py: skip all tests require folder a git repoThomas Roos2023-05-251-0/+8
| | | | | | | | | | | | | Devtool selftests require poky dir a git repo, when downloading poky as a tar, this is not the case. Those tests will now skipped. [YOCTO #12389] (From OE-Core rev: 95a5bc130dc51ea9de95c64dbf0e9c7892415d50) Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemurunner: add boot logs to do_testimage task logs in real timeMikko Rapeli2023-05-251-0/+1
| | | | | | | | | | | | | | | | | | | | | Complex boot sequences take a lot of time to reach serial console login. In our case boot involves multiple bootloaders like u-boot and grub, then hypervisors like xen, then initramfs images which do things like validating secure boot and encrypting the main rootfs. All these happen before main rootfs serial console login prompt is reached and thus many things can go wrong, including race conditions, hangs and deadlocks, and thus logging the details is important for development. This change adds the qemu serial console logs to do_testimage task logs while they are being read out. The logs are not added to bitbake output. This enables debugging and tracing the do_testimage via task log file while the boot and tests are running. (From OE-Core rev: cb62fae6ea3e411643395b12e56c363ce4d73e5d) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: adding selftest-hello and use it to speed up testsThomas Roos2023-05-221-9/+9
| | | | | | | | | | | | | | Adding a selftest version of hello world to run it in tests where no download is necessary. Also using this in several tests to speed them up. Using the -native version wherever possible will also speed up tests a lot. [YOCTO #11142] (From OE-Core rev: c3f26b63934888df0e3cd563c1c2804eb78a368e) Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemurunner: avoid leaking server_socketMikko Rapeli2023-05-221-0/+1
| | | | | | | | | | | close() the server_socket before qemusock replaces it. (From OE-Core rev: be7bbbeeb44158b181d1abc5a4d7871a9045fdd6) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemurunner: support serial console login via qemu stdoutMikko Rapeli2023-05-221-11/+19
| | | | | | | | | | | | | | | | runqemu script works with qemu machines which provide login and serial console to the qemu process stdout. Add the same support to qemurunner so that testing with testimage.bbclass is possible. Default qemu machines provide serial console boot logs and login via socket to qemu process but I don't see a reason why qemu process stdout should not be supported too since they work with runqemu as well. (From OE-Core rev: a3d4b80c5b4cce933c759d023c75b8671c56fe12) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/sdk/assimp: run only when zlib is in the SDKAlexander Kanavin2023-05-051-0/+3
| | | | | | | | | | | | | | Otherwise assimp will silently fall back to a vendored copy of zlib which will fail with -D_TIME_BITS=64 due to https://github.com/madler/zlib/pull/764 This was exposed by multilib mips core-image-minimal SDKs, where the default 64 bit sysroot has zlib, but 32 bit sysroot does not. (From OE-Core rev: c0fb603c9e26e91388320c02842b42cc7b091d6c) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* zvariant: add ptest feature for zvariant test suiteFrederic Martinsons2023-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Below is the output of run-ptest script under qemu root@qemux86-64:~# /usr/lib/zvariant/ptest/run-ptest running 37 tests test framing_offset_size::tests::framing_offset_size_bump ... ok$<2> test owned_value::tests::from_value ... ok$<2> test object_path::unit::owned_from_reader ... ok$<2> test str::tests::from_string ... ok$<2> test signature::tests::signature_slicing ... ok$<2> test str::tests::test_ordering ... ok$<2> test owned_value::tests::map_conversion ... ok$<2> test owned_value::tests::serde ... ok$<2> test tests::enums ... ok$<2> test tests::derive ... ok$<2> test tests::f64_value ... ok$<2> test tests::i16_value ... ok$<2> test tests::fd_value ... ok$<2> test tests::i32_value ... ok$<2> test tests::i8_value ... ok$<2> test tests::i64_value ... ok$<2> test tests::ip_addr ... ok$<2> test tests::issue_59 ... ok$<2> test tests::issue_99 ... ok$<2> test tests::array_value ... ok$<2> test tests::object_path_value ... ok$<2> test tests::dict_value ... ok$<2> test tests::signature_value ... ok$<2> test tests::serialized_size ... ok$<2> test tests::struct_byte_array ... ok$<2> test tests::struct_ref ... ok$<2> test tests::str_value ... ok$<2> test tests::option_value ... ok$<2> test tests::struct_value ... ok$<2> test tests::struct_with_hashmap ... ok$<2> test tests::u16_value ... ok$<2> test tests::u32_value ... ok$<2> test tests::unit ... ok$<2> test tests::u8_value ... ok$<2> test tests::unit_fds ... ok$<2> test tests::value_value ... ok$<2> test tests::recursion_limits ... ok$<2> test result: ok$<2>. 37 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.21s root@qemux86-64:~# (From OE-Core rev: 912bbec9fe44f22ab70c3553af6cb699543b8411) Signed-off-by: Frederic Martinsons <frederic.martinsons@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/distrodata: clean up exception lists in recipe maintainers testAlexander Kanavin2023-05-051-3/+3
| | | | | | | | | | | | | | | | | Specifically: - add missing maintainer.inc entries for initramfs-module-*, systemd-machine-units and target-sdk-provides-dummy and drop them from exception list. - remove rust from exception list for unbuildable-by-default recipes as it is now buildable. - add missing maintainer.inc entry for libx11-compose-data and cve-update-nvd2-native; as they are also unbuildable by default, they needs to be in exception list as well. (From OE-Core rev: e9158b191c1cfc16f97abed6c05891aa84fe9463) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes: Default to https git protocol where possibleRichard Purdie2023-05-052-4/+6
| | | | | | | | | | The recommendation from server maintainers is that the https protocol is both faster and more reliable than the dedicated git protocol at this point. Switch to it where possible. (From OE-Core rev: 139102a73d4151f4748b4a861bd4ab28dda7dab7) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/ptest: Make returning no test results a failureRichard Purdie2023-05-032-3/+9
| | | | | | | | | | | | | Ensure that even if a ptests results section is empty, the log parser adds that empty section. Then ensure that empty sections trigger warnings. This means if a ptest suddently stops returning any results, we notice and see warnings about it. This has gone unnoticed on the autobuilder far too many times so is very much worth highlighting as a regression. We shouldn't have empty ptests. (From OE-Core rev: 5ad0cf57b41ec7f44647a03bc568d0b24906cc8d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/metadata.py: Fix running oe-selftest running with no distro setThomas Roos2023-04-201-3/+3
| | | | | | | | | | | | This will use default values when no distribution is set. [YOCTO #15086] (From OE-Core rev: 888fe63b46efceeff08dbe8c4f66fec33d06cb7a) Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: Use SSTATE_DIR of parent build dirThomas Roos2023-04-201-0/+10
| | | | | | | | | | | This will configure the build-st/conf/local.conf with the SSTATE_DIR of the parent build dir to speed up the build, test, dev process. (From OE-Core rev: 71dca60ddcf4370ff7e91de6ddf8a7d4cf76db50) Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: wic: Add test for --part-name argumentDit Kozmaj2023-04-131-0/+23
| | | | | | | | | | | | | | | | | | | Add test for wic --part-name argument in .wks file. Test three different cases: - Set only the --part-name argument. - Set only the --label argument. In this case the GPT partition label is set to the value of --label for compatibility reasons. - Set both. In this case the code has been changed to set the GPT partition label to the --part-name value. The test uses a test_gpt_partition_name.wks file created for this purpose. (From OE-Core rev: 06af6795cf6f079362303bddb39a14459e228e72) Signed-off-by: Dit Kozmaj <dit.kozmaj@kynetics.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa ping.py: fail test if target IP address has not been setMikko Rapeli2023-04-061-0/+1
| | | | | | | | | | | It is possible to call exported tests with --target-ip set to ":22" where IP address is not set at all. Detect this case and fail the test instead of calling ping without an IP address. (From OE-Core rev: 17c995c53775b8cee279ca4ced916092067e1195) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa ping.py: avoid busylooping failing ping commandMikko Rapeli2023-04-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a sleep on error path before trying again. For example when oeqa runtime tests are executed without setting target IP address correctly, the tests are drowning logs with messages: 2023-04-04 07:19:24,985 - runtime - INFO - test_ping (ping.PingTest.test_ping) ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ping: usage error: Destination address required ... 2023-04-04 07:19:55,002 - runtime - INFO - ... FAIL 2023-04-04 07:19:55,002 - runtime - INFO - Traceback (most recent call last): File \"/lava-62618/3/tests/3_oeqa-runtime-tests/image/lib/oeqa/runtime/cases/ping.py\", line 23, in test_ping output += proc.communicate()[0].decode('utf-8') ^^^^^^^^^^^^^^^^^^ File \"/usr/lib/python3.11/subprocess.py\", line 1194, in communicate stdout = self.stdout.read() ^^^^^^^^^^^^^^^^^^ File \"/lava-62618/3/tests/3_oeqa-runtime-tests/image/lib/oeqa/core/decorator/oetimeout.py\", line 18, in _timeoutHandler raise OEQATimeoutError(\"Timed out after %s \" oeqa.core.exception.OEQATimeoutError: Timed out after 30 seconds of execution (From OE-Core rev: 87ec75710b5cd7b3f35d886003844d62d3182b54) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: efibootpartition.py: fix QEMU_USE_KVM usageMartin Jansa2023-04-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | * if you don't have QEMU_USE_KVM in local.conf it fails with: 2023-03-12 18:06:29,591 - oe-selftest - DEBUG - Checking if qemux86-64 is not this MACHINE 2023-03-12 18:06:29,594 - oe-selftest - INFO - ... ERROR 2023-03-12 18:06:29,594 - oe-selftest - INFO - Traceback (most recent call last): File "/OE/build/poky/meta/lib/oeqa/core/decorator/__init__.py", line 35, in wrapped_f return func(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^ File "/OE/build/poky/meta/lib/oeqa/selftest/cases/efibootpartition.py", line 18, in test_boot_efi if oe.types.qemu_use_kvm(self.td['QEMU_USE_KVM'], self.td["TARGET_ARCH"]): ~~~~~~~^^^^^^^^^^^^^^^^ KeyError: 'QEMU_USE_KVM' [YOCTO #12937] (From OE-Core rev: 7c32ca2f91beb98769c89470b37f06cb4b99aebb) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/bblogging: uncomment python stdout checksMark Asselstine2023-04-051-12/+6
| | | | | | | | | | | | Since bitbake commit 81a58647b2f4fc0a2589b2978fc9d81b2bfe6aec [bitbake: build: Make python output print to stdout when running with -v (verbose)] we no longer need to comment out the python stdout checks. (From OE-Core rev: 67886a8473c511c8ab3db2e4587cc5a070979d11) Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime: clean up deprecated backslash expansionRoss Burton2023-04-033-5/+8
| | | | | | | (From OE-Core rev: 77085a05240c3f8226b9f2199c977f2555807789) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: runqemu: use better error message when asserts failMartin Jansa2023-04-031-3/+6
| | | | | | | | | | | | * It was showing whole log and that the runqemu command failed, but not where the log file is, nor why it thinks the runqemu failed [YOCTO #12937] (From OE-Core rev: ad4b72e6524114a3bdee10cab71f194ea143cd24) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: runqemu: better check for ROOTFS: in the logMartin Jansa2023-04-031-1/+2
| | | | | | | | | | | | | | | | | | * it was searching for line like this: ROOTFS: [/OE/build/poky/build/build-st-2023-03-20-esdk-runqemu-patch1/runqemu.RunqemuTests.test_boot_machine_ext4/build-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20230320081121.rootfs.ext4] but with IMAGE_NAME_SUFFIX changed to something else than default ".rootfs" or with my pending changes the line looks like this: ROOTFS: [/OE/build/poky/build/build-st-2023-03-20-esdk-runqemu-patch2/runqemu.RunqemuTests.test_boot_machine_ext4/build-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs-20230320085744.ext4] and test was failing. * Check for whole line starting with ROOTFS: and ending just with .ext4 [YOCTO #12937] (From OE-Core rev: 7a0f622f23aff2c4eeca0606e7682931eb53287a) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: imagefeatures.py: don't mix tabs and spaces for indentationMartin Jansa2023-04-031-4/+4
| | | | | | | | | | * introduced in: https://git.openembedded.org/openembedded-core/commit/?id=96d4486df6d870ef19e2055b026729e66bc118f3 (From OE-Core rev: 143f624116802579e7a6804c8d4b562f931880c8) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-selftest: provide a recipe for zvariantFrederic Martinsons2023-04-011-0/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This recipe is for showing a "real world" example of a crate that depends on some git repositories. Usually, this kind of crate is built within a global workspace (here it is the zbus project) and so doesn't need a Cargo.lock on its own. For the sake of the demonstration, I had to tweak things a little to be able to compile zvariant in standalone (no relative path in dependency, no symlink to LICENSE provide a Cargo.lock) The use case where the crate had some git repository in dependency is very common for "private" crate that are not aimed to be published on crates.io. When the project grow bigger, it is common to have a bin and multiple lib developped in parallel, and these libs are surely on a git repostitory. A test case have been also added to check for: - the previous patch about git subpath parameter and devtool - the correctness of overriding dependencies (first patch of the series) (From OE-Core rev: 409e045f96f69877de6f36ed14c5c19a9cb74eaf) Signed-off-by: Frederic Martinsons <frederic.martinsons@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: whitespace and indentation cleanupsEnrico Jörns2023-03-314-16/+16
| | | | | | | (From OE-Core rev: 4922221d1259e2f78233f17bb901cdac5b9aa520) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/qemurunner: fix undefined TimeoutExpiredEnrico Jörns2023-03-311-1/+1
| | | | | | | (From OE-Core rev: 19ae3f4440b09d4cfe4bc589d859d476168541bd) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/qemurunner: limit precision of timing debugging outputEnrico Jörns2023-03-311-7/+7
| | | | | | | | | | | | | * There is no need to be that precise. It just irritates in the logs. * There is also no point in printing plain time.time() value a single time while only using formatted printout everywhere else, thus remove it. * Use %d for printing integer times (From OE-Core rev: f0988cb8cf8d03708490cca4eba345492ef78d52) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/qemurunner: replace hard-coded user 'root' in debug outputEnrico Jörns2023-03-311-2/+2
| | | | | | | | | | | | Since login user is configurable with boot_patterns['send_login_user'], unconditionally using 'root' in the debug message can be confusing. Also fix the debug message to say 'Logged in' instead of 'Logged'. (From OE-Core rev: 900e3d42b918b5a33d8d952b3a8078fbe72ba98f) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/commands: remove unused importsEnrico Jörns2023-03-311-3/+0
| | | | | | | (From OE-Core rev: 0c00b5cdd57c3d9c47d4780d6627c74221911b72) Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-08-09 14:30:11 +0000