From 3240a59758e918afa79d14c961492d6f98cc3d85 Mon Sep 17 00:00:00 2001 From: Nicolas Dechesne Date: Thu, 3 Dec 2020 22:38:41 +0100 Subject: overview-manual: remove 'overview-manual' from filenames All filenames duplicate the 'manual name', which is not needed, and make all references longer than they should. Rename all files to be as consise as possible, and fix all references (From yocto-docs rev: 4f489a40bb00be018e419802a76fec9dbee3f255) Signed-off-by: Nicolas Dechesne Signed-off-by: Richard Purdie --- documentation/ref-manual/faq.rst | 2 +- documentation/ref-manual/migration-1.7.rst | 2 +- documentation/ref-manual/migration-2.3.rst | 2 +- documentation/ref-manual/ref-classes.rst | 12 +++--- documentation/ref-manual/ref-release-process.rst | 2 +- documentation/ref-manual/ref-structure.rst | 6 +-- .../ref-manual/ref-system-requirements.rst | 2 +- documentation/ref-manual/ref-tasks.rst | 36 ++++++++--------- documentation/ref-manual/ref-terms.rst | 6 +-- documentation/ref-manual/ref-variables.rst | 46 +++++++++++----------- 10 files changed, 58 insertions(+), 58 deletions(-) (limited to 'documentation/ref-manual') diff --git a/documentation/ref-manual/faq.rst b/documentation/ref-manual/faq.rst index 5b9fcc1912..cc6b3aee1b 100644 --- a/documentation/ref-manual/faq.rst +++ b/documentation/ref-manual/faq.rst @@ -198,7 +198,7 @@ and also any configuration information about how that package was configured and built. You can find more information on licensing in the -":ref:`overview-manual/overview-manual-development-environment:licensing`" +":ref:`overview-manual/development-environment:licensing`" section in the Yocto Project Overview and Concepts Manual and also in the ":ref:`dev-manual/common-tasks:maintaining open source license compliance during your product's lifecycle`" diff --git a/documentation/ref-manual/migration-1.7.rst b/documentation/ref-manual/migration-1.7.rst index 85894d9df7..177d40900f 100644 --- a/documentation/ref-manual/migration-1.7.rst +++ b/documentation/ref-manual/migration-1.7.rst @@ -26,7 +26,7 @@ QEMU, you should now have these lines in ``local.conf``: Minimum Git version ------------------- -The minimum :ref:`overview-manual/overview-manual-development-environment:git` +The minimum :ref:`overview-manual/development-environment:git` version required on the build host is now 1.7.8 because the ``--list`` option is now required by BitBake's Git fetcher. As always, if your host distribution does not diff --git a/documentation/ref-manual/migration-2.3.rst b/documentation/ref-manual/migration-2.3.rst index 9e95f45e1f..6984ff91e8 100644 --- a/documentation/ref-manual/migration-2.3.rst +++ b/documentation/ref-manual/migration-2.3.rst @@ -51,7 +51,7 @@ Consider the following: :term:`SYSROOT_PREPROCESS_FUNCS`. For an example, see the ``pixbufcache`` class in ``meta/classes/`` in - the :ref:`overview-manual/overview-manual-development-environment:yocto project source repositories`. + the :ref:`overview-manual/development-environment:yocto project source repositories`. .. note:: diff --git a/documentation/ref-manual/ref-classes.rst b/documentation/ref-manual/ref-classes.rst index 914ca42324..900341e5ac 100644 --- a/documentation/ref-manual/ref-classes.rst +++ b/documentation/ref-manual/ref-classes.rst @@ -406,7 +406,7 @@ cross-compilation tools. The ``cross-canadian`` class provides support for the recipes that build the Canadian Cross-compilation tools for SDKs. See the -":ref:`overview-manual/overview-manual-concepts:cross-development toolchain generation`" +":ref:`overview-manual/concepts:cross-development toolchain generation`" section in the Yocto Project Overview and Concepts Manual for more discussion on these cross-compilation tools. @@ -417,7 +417,7 @@ discussion on these cross-compilation tools. The ``crosssdk`` class provides support for the recipes that build the cross-compilation tools used for building SDKs. See the -":ref:`overview-manual/overview-manual-concepts:cross-development toolchain generation`" +":ref:`overview-manual/concepts:cross-development toolchain generation`" section in the Yocto Project Overview and Concepts Manual for more discussion on these cross-compilation tools. @@ -930,7 +930,7 @@ For information on customizing images, see the ":ref:`dev-manual/common-tasks:customizing images`" section in the Yocto Project Development Tasks Manual. For information on how images are created, see the -":ref:`overview-manual/overview-manual-concepts:images`" section in the +":ref:`overview-manual/concepts:images`" section in the Yocto Project Overview and Concpets Manual. .. _ref-classes-image-buildinfo: @@ -2039,7 +2039,7 @@ These classes are inherited by and used with the ``populate_sdk_base`` class. For more information on the cross-development toolchain generation, see -the ":ref:`overview-manual/overview-manual-concepts:cross-development toolchain generation`" +the ":ref:`overview-manual/concepts:cross-development toolchain generation`" section in the Yocto Project Overview and Concepts Manual. For information on advantages gained when building a cross-development toolchain using the :ref:`ref-tasks-populate_sdk` @@ -2268,7 +2268,7 @@ The root filesystem is created from packages using one of the :term:`PACKAGE_CLASSES` variable. For information on how root filesystem images are created, see the -":ref:`overview-manual/overview-manual-concepts:image generation`" +":ref:`overview-manual/concepts:image generation`" section in the Yocto Project Overview and Concepts Manual. .. _ref-classes-sanity: @@ -2375,7 +2375,7 @@ default, the class is enabled through the :term:`INHERIT_DISTRO` variable's default value. For more information on sstate, see the -":ref:`overview-manual/overview-manual-concepts:shared state cache`" +":ref:`overview-manual/concepts:shared state cache`" section in the Yocto Project Overview and Concepts Manual. .. _ref-classes-staging: diff --git a/documentation/ref-manual/ref-release-process.rst b/documentation/ref-manual/ref-release-process.rst index 54cd9510f6..20be09a4ff 100644 --- a/documentation/ref-manual/ref-release-process.rst +++ b/documentation/ref-manual/ref-release-process.rst @@ -50,7 +50,7 @@ Major Release Codenames ======================= Each major release receives a codename that identifies the release in -the :ref:`overview-manual/overview-manual-development-environment:yocto project source repositories`. +the :ref:`overview-manual/development-environment:yocto project source repositories`. The concept is that branches of :term:`Metadata` with the same codename are likely to be compatible and thus work together. diff --git a/documentation/ref-manual/ref-structure.rst b/documentation/ref-manual/ref-structure.rst index b681e8233f..606a77c7fa 100644 --- a/documentation/ref-manual/ref-structure.rst +++ b/documentation/ref-manual/ref-structure.rst @@ -399,8 +399,8 @@ This directory contains any "end result" output from the OpenEmbedded build process. The :term:`DEPLOY_DIR` variable points to this directory. For more detail on the contents of the ``deploy`` directory, see the -":ref:`overview-manual/overview-manual-concepts:images`" and -":ref:`overview-manual/overview-manual-concepts:application development sdk`" sections in the Yocto +":ref:`overview-manual/concepts:images`" and +":ref:`overview-manual/concepts:application development sdk`" sections in the Yocto Project Overview and Concepts Manual. .. _structure-build-tmp-deploy-deb: @@ -545,7 +545,7 @@ and timestamps for tracking purposes. For information on how BitBake uses stamp files to determine if a task should be rerun, see the -":ref:`overview-manual/overview-manual-concepts:stamp files and the rerunning of tasks`" +":ref:`overview-manual/concepts:stamp files and the rerunning of tasks`" section in the Yocto Project Overview and Concepts Manual. .. _structure-build-tmp-log: diff --git a/documentation/ref-manual/ref-system-requirements.rst b/documentation/ref-manual/ref-system-requirements.rst index d162c9bad2..66afb08102 100644 --- a/documentation/ref-manual/ref-system-requirements.rst +++ b/documentation/ref-manual/ref-system-requirements.rst @@ -15,7 +15,7 @@ Yocto Project. For introductory information on the Yocto Project, see the :yocto_home:`Yocto Project Website <>` and the -":ref:`overview-manual/overview-manual-development-environment:the yocto project development environment`" +":ref:`overview-manual/development-environment:the yocto project development environment`" chapter in the Yocto Project Overview and Concepts Manual. If you want to use the Yocto Project to quickly build an image without diff --git a/documentation/ref-manual/ref-tasks.rst b/documentation/ref-manual/ref-tasks.rst index 768c10eebd..8b9e0c2d89 100644 --- a/documentation/ref-manual/ref-tasks.rst +++ b/documentation/ref-manual/ref-tasks.rst @@ -140,7 +140,7 @@ The ``do_image`` task performs pre-processing on the image through the :term:`IMAGE_PREPROCESS_COMMAND` and dynamically generates supporting ``do_image_*`` tasks as needed. -For more information on image creation, see the ":ref:`overview-manual/overview-manual-concepts:image generation`" +For more information on image creation, see the ":ref:`overview-manual/concepts:image generation`" section in the Yocto Project Overview and Concepts Manual. .. _ref-tasks-image-complete: @@ -159,7 +159,7 @@ through the :term:`IMAGE_POSTPROCESS_COMMAND`. For more information on image creation, see the -":ref:`overview-manual/overview-manual-concepts:image generation`" +":ref:`overview-manual/concepts:image generation`" section in the Yocto Project Overview and Concepts Manual. .. _ref-tasks-install: @@ -174,7 +174,7 @@ compilation directory. The ``do_install`` task, as well as other tasks that either directly or indirectly depend on the installed files (e.g. :ref:`ref-tasks-package`, ``do_package_write_*``, and :ref:`ref-tasks-rootfs`), run under -:ref:`fakeroot `. +:ref:`fakeroot `. .. note:: @@ -218,7 +218,7 @@ The ``do_package`` task, in conjunction with the :ref:`ref-tasks-packagedata` task, also saves some important package metadata. For additional information, see the :term:`PKGDESTWORK` variable and the -":ref:`overview-manual/overview-manual-concepts:automatically added runtime dependencies`" +":ref:`overview-manual/concepts:automatically added runtime dependencies`" section in the Yocto Project Overview and Concepts Manual. .. _ref-tasks-package_qa: @@ -237,7 +237,7 @@ see the :ref:`insane ` class. Creates Debian packages (i.e. ``*.deb`` files) and places them in the ``${``\ :term:`DEPLOY_DIR_DEB`\ ``}`` directory in the package feeds area. For more information, see the -":ref:`overview-manual/overview-manual-concepts:package feeds`" section in +":ref:`overview-manual/concepts:package feeds`" section in the Yocto Project Overview and Concepts Manual. .. _ref-tasks-package_write_ipk: @@ -248,7 +248,7 @@ the Yocto Project Overview and Concepts Manual. Creates IPK packages (i.e. ``*.ipk`` files) and places them in the ``${``\ :term:`DEPLOY_DIR_IPK`\ ``}`` directory in the package feeds area. For more information, see the -":ref:`overview-manual/overview-manual-concepts:package feeds`" section in +":ref:`overview-manual/concepts:package feeds`" section in the Yocto Project Overview and Concepts Manual. .. _ref-tasks-package_write_rpm: @@ -259,7 +259,7 @@ the Yocto Project Overview and Concepts Manual. Creates RPM packages (i.e. ``*.rpm`` files) and places them in the ``${``\ :term:`DEPLOY_DIR_RPM`\ ``}`` directory in the package feeds area. For more information, see the -":ref:`overview-manual/overview-manual-concepts:package feeds`" section in +":ref:`overview-manual/concepts:package feeds`" section in the Yocto Project Overview and Concepts Manual. .. _ref-tasks-package_write_tar: @@ -270,7 +270,7 @@ the Yocto Project Overview and Concepts Manual. Creates tarballs and places them in the ``${``\ :term:`DEPLOY_DIR_TAR`\ ``}`` directory in the package feeds area. For more information, see the -":ref:`overview-manual/overview-manual-concepts:package feeds`" section in +":ref:`overview-manual/concepts:package feeds`" section in the Yocto Project Overview and Concepts Manual. .. _ref-tasks-packagedata: @@ -349,7 +349,7 @@ patch files end with either ``.patch`` or ``.diff``, every file would be applied as a patch by default except for the ``patch_file5`` patch. You can find out more about the patching process in the -":ref:`overview-manual/overview-manual-concepts:patching`" section in +":ref:`overview-manual/concepts:patching`" section in the Yocto Project Overview and Concepts Manual and the ":ref:`dev-manual/common-tasks:patching code`" section in the Yocto Project Development Tasks Manual. @@ -368,7 +368,7 @@ the image is constructed. ------------------- Creates the file and directory structure for an installable SDK. See the -":ref:`overview-manual/overview-manual-concepts:sdk generation`" +":ref:`overview-manual/concepts:sdk generation`" section in the Yocto Project Overview and Concepts Manual for more information. @@ -378,7 +378,7 @@ information. ----------------------- Creates the file and directory structure for an installable extensible -SDK (eSDK). See the ":ref:`overview-manual/overview-manual-concepts:sdk generation`" +SDK (eSDK). See the ":ref:`overview-manual/concepts:sdk generation`" section in the Yocto Project Overview and Concepts Manual for more information. @@ -434,7 +434,7 @@ Unpacks the source code into a working directory pointed to by ``${``\ :term:`WORKDIR`\ ``}``. The :term:`S` variable also plays a role in where unpacked source files ultimately reside. For more information on how source files are unpacked, see the -":ref:`overview-manual/overview-manual-concepts:source fetching`" +":ref:`overview-manual/concepts:source fetching`" section in the Yocto Project Overview and Concepts Manual and also see the ``WORKDIR`` and ``S`` variable descriptions. @@ -500,7 +500,7 @@ You can run this task using BitBake as follows: $ bitbake -c clean recipe Running this task does not remove the -:ref:`sstate ` cache files. +:ref:`sstate ` cache files. Consequently, if no changes have been made and the recipe is rebuilt after cleaning, output files are simply restored from the sstate cache. If you want to remove the sstate cache files for the recipe, you need to @@ -513,7 +513,7 @@ use the :ref:`ref-tasks-cleansstate` task instead --------------- Removes all output files, shared state -(:ref:`sstate `) cache, and +(:ref:`sstate `) cache, and downloaded source files for a target (i.e. the contents of :term:`DL_DIR`). Essentially, the ``do_cleanall`` task is identical to the :ref:`ref-tasks-cleansstate` task @@ -534,10 +534,10 @@ task. ------------------ Removes all output files and shared state -(:ref:`sstate `) cache for a +(:ref:`sstate `) cache for a target. Essentially, the ``do_cleansstate`` task is identical to the :ref:`ref-tasks-clean` task with the added removal of -shared state (:ref:`sstate `) +shared state (:ref:`sstate `) cache. You can run this task using BitBake as follows: @@ -593,7 +593,7 @@ Lists all defined tasks for a target. ``do_package_index`` -------------------- -Creates or updates the index in the :ref:`overview-manual/overview-manual-concepts:package feeds` area. +Creates or updates the index in the :ref:`overview-manual/concepts:package feeds` area. .. note:: @@ -631,7 +631,7 @@ has some more information about these types of images. ------------- Creates the root filesystem (file and directory structure) for an image. -See the ":ref:`overview-manual/overview-manual-concepts:image generation`" +See the ":ref:`overview-manual/concepts:image generation`" section in the Yocto Project Overview and Concepts Manual for more information on how the root filesystem is created. diff --git a/documentation/ref-manual/ref-terms.rst b/documentation/ref-manual/ref-terms.rst index ba1930ebda..f41073602d 100644 --- a/documentation/ref-manual/ref-terms.rst +++ b/documentation/ref-manual/ref-terms.rst @@ -160,7 +160,7 @@ universal, the list includes them just in case: Creation of these toolchains is simple and automated. For information on toolchain concepts as they apply to the Yocto Project, see the - ":ref:`overview-manual/overview-manual-concepts:Cross-Development + ":ref:`overview-manual/concepts:Cross-Development Toolchain Generation`" section in the Yocto Project Overview and Concepts Manual. You can also find more information on using the relocatable toolchain in the :doc:`/sdk-manual/index` manual. @@ -189,7 +189,7 @@ universal, the list includes them just in case: layers used within Yocto Project. For introductory information on layers, see the - ":ref:`overview-manual/overview-manual-yp-intro:The Yocto Project Layer + ":ref:`overview-manual/yp-intro:The Yocto Project Layer Model`" section in the Yocto Project Overview and Concepts Manual. For more detailed information on layers, see the ":ref:`dev-manual/common-tasks:Understanding and Creating @@ -366,7 +366,7 @@ universal, the list includes them just in case: For more information on concepts related to Git repositories, branches, and tags, see the - ":ref:`overview-manual/overview-manual-development-environment:repositories, tags, and branches`" + ":ref:`overview-manual/development-environment:repositories, tags, and branches`" section in the Yocto Project Overview and Concepts Manual. :term:`Task` diff --git a/documentation/ref-manual/ref-variables.rst b/documentation/ref-manual/ref-variables.rst index d98e358173..a8a949b92a 100644 --- a/documentation/ref-manual/ref-variables.rst +++ b/documentation/ref-manual/ref-variables.rst @@ -1016,7 +1016,7 @@ system and gives an overview of their function and contents. (SDK). - *task:* Save output file signatures for - :ref:`shared state ` + :ref:`shared state ` (sstate) tasks. This saves one file per task and lists the SHA-256 checksums for each file staged (i.e. the output of the task). @@ -1522,7 +1522,7 @@ system and gives an overview of their function and contents. .. note:: Tasks that read from or write to this directory should run under - :ref:`fakeroot `. + :ref:`fakeroot `. :term:`DATE` The date the build was started. Dates appear using the year, month, @@ -1641,7 +1641,7 @@ system and gives an overview of their function and contents. - One recipe having another recipe in ``DEPENDS`` does not by itself add any runtime dependencies between the packages produced by the two recipes. However, as explained in the - ":ref:`overview-manual/overview-manual-concepts:automatically added runtime dependencies`" + ":ref:`overview-manual/concepts:automatically added runtime dependencies`" section in the Yocto Project Overview and Concepts Manual, runtime dependencies will often be added automatically, meaning ``DEPENDS`` alone is sufficient for most recipes. @@ -1672,9 +1672,9 @@ system and gives an overview of their function and contents. For more information on the structure of the Build Directory, see ":ref:`ref-manual/ref-structure:the build directory - \`\`build/\`\``" section. For more detail on the contents of the ``deploy`` directory, see the - ":ref:`overview-manual/overview-manual-concepts:images`", - ":ref:`overview-manual/overview-manual-concepts:package feeds`", and - ":ref:`overview-manual/overview-manual-concepts:application development sdk`" sections all in the + ":ref:`overview-manual/concepts:images`", + ":ref:`overview-manual/concepts:package feeds`", and + ":ref:`overview-manual/concepts:application development sdk`" sections all in the Yocto Project Overview and Concepts Manual. :term:`DEPLOY_DIR_DEB` @@ -1696,7 +1696,7 @@ system and gives an overview of their function and contents. :ref:`ref-tasks-package_write_deb` task writes Debian packages into the appropriate folder. For more information on how packaging works, see the - ":ref:`overview-manual/overview-manual-concepts:package feeds`" section + ":ref:`overview-manual/concepts:package feeds`" section in the Yocto Project Overview and Concepts Manual. :term:`DEPLOY_DIR_IMAGE` @@ -1710,8 +1710,8 @@ system and gives an overview of their function and contents. For more information on the structure of the Build Directory, see ":ref:`ref-manual/ref-structure:the build directory - \`\`build/\`\``" section. For more detail on the contents of the ``deploy`` directory, see the - ":ref:`overview-manual/overview-manual-concepts:images`" and - ":ref:`overview-manual/overview-manual-concepts:application development sdk`" sections both in + ":ref:`overview-manual/concepts:images`" and + ":ref:`overview-manual/concepts:application development sdk`" sections both in the Yocto Project Overview and Concepts Manual. :term:`DEPLOY_DIR_IPK` @@ -1732,7 +1732,7 @@ system and gives an overview of their function and contents. :ref:`ref-tasks-package_write_ipk` task writes IPK packages into the appropriate folder. For more information on how packaging works, see the - ":ref:`overview-manual/overview-manual-concepts:package feeds`" section + ":ref:`overview-manual/concepts:package feeds`" section in the Yocto Project Overview and Concepts Manual. :term:`DEPLOY_DIR_RPM` @@ -1753,7 +1753,7 @@ system and gives an overview of their function and contents. :ref:`ref-tasks-package_write_rpm` task writes RPM packages into the appropriate folder. For more information on how packaging works, see the - ":ref:`overview-manual/overview-manual-concepts:package feeds`" section + ":ref:`overview-manual/concepts:package feeds`" section in the Yocto Project Overview and Concepts Manual. :term:`DEPLOY_DIR_TAR` @@ -1774,7 +1774,7 @@ system and gives an overview of their function and contents. :ref:`ref-tasks-package_write_tar` task writes TAR packages into the appropriate folder. For more information on how packaging works, see the - ":ref:`overview-manual/overview-manual-concepts:package feeds`" section + ":ref:`overview-manual/concepts:package feeds`" section in the Yocto Project Overview and Concepts Manual. :term:`DEPLOYDIR` @@ -2419,7 +2419,7 @@ system and gives an overview of their function and contents. The previous statement appears in the ``linux-yocto-dev.bbappend`` file, which is found in the - :ref:`overview-manual/overview-manual-development-environment:yocto project source repositories` in + :ref:`overview-manual/development-environment:yocto project source repositories` in ``meta-intel/common/recipes-kernel/linux``. Here, the machine override is a special :term:`PACKAGE_ARCH` definition for multiple ``meta-intel`` machines. @@ -2509,7 +2509,7 @@ system and gives an overview of their function and contents. build system uses files from ``files/defconfig``. You can find out more about the patching process in the - ":ref:`overview-manual/overview-manual-concepts:patching`" section + ":ref:`overview-manual/concepts:patching`" section in the Yocto Project Overview and Concepts Manual and the ":ref:`dev-manual/common-tasks:patching code`" section in the Yocto Project Development Tasks Manual. See the @@ -3126,7 +3126,7 @@ system and gives an overview of their function and contents. The location is derived using the :term:`DEPLOY_DIR_IMAGE` and :term:`IMAGE_NAME` variables. You can find - information on how the image is created in the ":ref:`overview-manual/overview-manual-concepts:image generation`" + information on how the image is created in the ":ref:`overview-manual/concepts:image generation`" section in the Yocto Project Overview and Concepts Manual. :term:`IMAGE_NAME` @@ -5578,7 +5578,7 @@ system and gives an overview of their function and contents. ${STAGING_DIR_HOST}/pkgdata For examples of how this data is used, see the - ":ref:`overview-manual/overview-manual-concepts:automatically added runtime dependencies`" + ":ref:`overview-manual/concepts:automatically added runtime dependencies`" section in the Yocto Project Overview and Concepts Manual and the ":ref:`dev-manual/common-tasks:viewing package information with \`\`oe-pkgdata-util\`\``" section in the Yocto Project Development Tasks Manual. For more @@ -5691,9 +5691,9 @@ system and gives an overview of their function and contents. The OpenEmbedded build system does not need the aid of ``PR`` to know when to rebuild a recipe. The build system uses the task - :ref:`input checksums ` along with the + :ref:`input checksums ` along with the :ref:`stamp ` and - :ref:`overview-manual/overview-manual-concepts:shared state cache` + :ref:`overview-manual/concepts:shared state cache` mechanisms. The ``PR`` variable primarily becomes significant when a package @@ -5875,7 +5875,7 @@ system and gives an overview of their function and contents. libplds4.so" For more information, see the - ":ref:`overview-manual/overview-manual-concepts:automatically added runtime dependencies`" + ":ref:`overview-manual/concepts:automatically added runtime dependencies`" section in the Yocto Project Overview and Concepts Manual. :term:`PROVIDES` @@ -6068,7 +6068,7 @@ system and gives an overview of their function and contents. runtime dependencies are automatically detected and added. Therefore, most recipes do not need to set ``RDEPENDS``. For more information, see the - ":ref:`overview-manual/overview-manual-concepts:automatically added runtime dependencies`" + ":ref:`overview-manual/concepts:automatically added runtime dependencies`" section in the Yocto Project Overview and Concepts Manual. The practical effect of the above ``RDEPENDS`` assignment is that @@ -7023,7 +7023,7 @@ system and gives an overview of their function and contents. - ``file://`` - Fetches files, which are usually files shipped with the :term:`Metadata`, from the local machine (e.g. - :ref:`patch ` files). + :ref:`patch ` files). The path is relative to the :term:`FILESPATH` variable. Thus, the build system searches, in order, from the following directories, which are assumed to be a subdirectories of @@ -7316,7 +7316,7 @@ system and gives an overview of their function and contents. see the :ref:`ref-tasks-populate_sysroot` task, the ":ref:`sdk-manual/sdk-extensible:sharing files between recipes`" section in the Yocto Project Development Tasks Manual, the - ":ref:`overview-manual/overview-manual-concepts:configuration, compilation, and staging`" + ":ref:`overview-manual/concepts:configuration, compilation, and staging`" section in the Yocto Project Overview and Concepts Manual, and the :term:`SYSROOT_DIRS` variable. @@ -7437,7 +7437,7 @@ system and gives an overview of their function and contents. For information on how BitBake uses stamp files to determine if a task should be rerun, see the - ":ref:`overview-manual/overview-manual-concepts:stamp files and the rerunning of tasks`" + ":ref:`overview-manual/concepts:stamp files and the rerunning of tasks`" section in the Yocto Project Overview and Concepts Manual. See :term:`STAMPS_DIR`, -- cgit v1.2.3-54-g00ecf