summaryrefslogtreecommitdiffstats
path: root/docs
Commit message (Collapse)AuthorAgeFilesLines
* Update internal filesystem layout for submodulesKaushik Lingarkar2025-02-041-1/+1
| | | | | | | | | | | | | | Change the bare checkout directory for submodules from 'subprojects' to 'modules'. Git expects bare submodule checkouts to be in the 'modules' directory. If old subproject directories are found, they will be migrated to the new modules directory. This change is the first step in ensuring Git can understand repo's submodules to some extent. Change-Id: I385029f1bb55d040616d970d6ffb4bb856692520 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/444881 Tested-by: Kaushik Lingarkar <kaushikl@qti.qualcomm.com> Reviewed-by: Josip Sokcevic <sokcevic@chromium.org>
* docs: smart-sync: split out & expand detailsMike Frysinger2025-01-302-20/+130
| | | | | | | | | | | | The existing documentation on smart-sync behavior is a bit light on details, and out of date wrt what the code actually does. Start a dedicated document and fill it out more. Change-Id: I1a8a3ac6edf9291d72182ad55db865035d9b683e Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/450002 Commit-Queue: Mike Frysinger <vapier@google.com> Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: Josip Sokcevic <sokcevic@chromium.org>
* Add REPO_SKIP_SELF_UPDATE check in syncFredrik de Groot2024-10-281-0/+3
| | | | | | | | | | | | | | | | | | | The command _PostRepoFetch will try to self update during repo sync. That is beneficial but adds version uncertainty, fail potential and slow downs in non-interactive scenarios. Conditionally skip the update if env variable REPO_SKIP_SELF_UPDATE is defined. A call to selfupdate works as before, meaning even with the variable set, it will run the update. Change-Id: Iab0ef55dc3d3db3cbf1ba1f506c57fbb58a504c3 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/439967 Tested-by: Fredrik de Groot <fredrik.de.groot@haleytek.com> Commit-Queue: Josip Sokcevic <sokcevic@google.com> Reviewed-by: Josip Sokcevic <sokcevic@google.com>
* manifest: add optional base check on remove and extendFredrik de Groot2024-10-281-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds an optional, built-in checker for guarding against patches hanging on wrong base revisions, which is useful if a lower layer of the manifest changes after a patch was done. When adding a patch with a new revision using extend-project or remove-project/project: C---D---E patches in project bla / A---B project bla in manifest state 1 <extend-project name="bla" revision="E" base-rev="B"> If project bla gets updated, in a new snap ID or by a supplier or similar, to a new state: C---D---E patches in project bla / A---B---F---G project bla in manifest state 2 Parsing will fail because revision of bla is now G, giving the choice to create a new patch branch from G and updating base-rev, or keeping previous branch for some reason and only updating base-rev. Intended for use in a layered manifest with hashed revisions. Named refs like branches and tags also work fine when comparing, but will be misleading if a branch is used as base-rev. Change-Id: Ic6211550a7d3cc9656057f6a2087c505b40cad2b Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/436777 Reviewed-by: Josip Sokcevic <sokcevic@google.com> Tested-by: Fredrik de Groot <fredrik.de.groot@haleytek.com> Commit-Queue: Josip Sokcevic <sokcevic@google.com>
* git: raise soft version to 2.7.4Mike Frysinger2024-03-201-5/+6
| | | | | | | | | | | | | | | | | git-1.9.1 was released in 2014 while git-2.7.4 was released in 2016. Debian Stretch was released in 2017 and Ubuntu Xenial was released in 2016 which are plenty old at this point. Both of those include at least git-2.7.4. We will start warning users of Debian Jessie (released in 2015 & EOL in 2020) and Ubuntu Trusty (released in 2014 & EOL Apr 2024) that they will need to upgrade. Change-Id: I6be3809bc45968fdcb02cad3f7daf75ded1bb5b1 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/415137 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: Josip Sokcevic <sokcevic@google.com> Commit-Queue: Mike Frysinger <vapier@google.com>
* docs: release: add recent git/python/ssh/debian infoMike Frysinger2024-03-201-5/+23
| | | | | | | | Change-Id: I744360b1bfc816e94b3511f0130abb2c08dedd42 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/415117 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: Josip Sokcevic <sokcevic@google.com> Commit-Queue: Mike Frysinger <vapier@google.com>
* docs: fix some grammar typosMike Frysinger2024-01-041-3/+2
| | | | | | | | Change-Id: Ie1a32cda67f94b0a2b3329b1be9e03dcbedf39cc Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/400917 Reviewed-by: Josip Sokcevic <sokcevic@google.com> Tested-by: Mike Frysinger <vapier@google.com> Commit-Queue: Mike Frysinger <vapier@google.com>
* python-support: update with current status & guidelinesMike Frysinger2023-10-141-29/+75
| | | | | | | | | | | | | | This doc was written back in 2019 when we were planning on the Python 3 migration. It isn't relevant anymore, and people are reading it thinking we still support Python 2. Rewrite it to match current requirements and to make it clear there is no support for older versions. Bug: 302871152 Change-Id: I2acf3aee1816a03ee0a70774db8bf4a23713a03f Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/389455 Commit-Queue: Mike Frysinger <vapier@google.com> Reviewed-by: Aravind Vasudevan <aravindvasudev@google.com> Tested-by: Mike Frysinger <vapier@google.com>
* docs: Document .repo_localsyncstate.jsonGavin Mak2023-08-181-2/+6
| | | | | | | | | | | Update docs to reflect the new internal filesystem layout. Bug: b/286126621, b/271507654 Change-Id: I8a2f8f36dff75544f32356ac5e31668f32ddffb3 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/383074 Reviewed-by: Mike Frysinger <vapier@google.com> Commit-Queue: Gavin Mak <gavinmak@google.com> Tested-by: Gavin Mak <gavinmak@google.com>
* manifest: enable remove-project using pathFredrik de Groot2023-06-211-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | A something.xml that gets included by two different files, that both remove and add same shared project to two different locations, would not work prior to this change. Reason is that remove killed all name keys, even though reuse of same repo in different locations is allowed. Solve by adding optional attrib path to <remove-project name="foo" path="only_this_path" /> and tweak remove-project. Behaves as before without path, and deletes more selectively when remove path is supplied. As secondary feature, a project can now also be removed by only using path, assuming a matching project name can be found. Change-Id: I502d9f949f5d858ddc1503846b170473f76dc8e2 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/375694 Tested-by: Fredrik de Groot <fredrik.de.groot@aptiv.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* manifest: add support for revision in includeShuchuan Zeng2023-05-051-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attribute groups can now be added to manifest include, thus all projects in an included manifest file can easily modify default branch without modifying all projects in that manifest file. For example, the main manifest.xml has an include node contain revision attribute, ``` <include name="include.xml" revision="r1" /> ``` and the include.xml has some projects, ``` <project path="project1_path" name="project1_name" revision="r2" /> <project path="project2_path" name="project2_name" /> ``` With this change, the final manifest will have revision="r1" for project2. ``` <project name="project1_name" path="project1_path" revision="r2" /> <project name="project2_name" path="project2_path" revision="r1" /> ``` Test: added unit tests to cover the inheritance Change-Id: I4b8547a7198610ec3a3c6aeb2136e0c0f3557df0 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/369714 Reviewed-by: Mike Frysinger <vapier@google.com> Commit-Queue: Shuchuan Zeng <zengshuchuan@allwinnertech.com> Tested-by: Shuchuan Zeng <zengshuchuan@allwinnertech.com>
* docs: update Focal Python versionMike Frysinger2023-03-021-1/+1
| | | | | | | | | | It ships with Python 3.8 by default, not 3.7. Change-Id: I11401d1098b60285cfdccadb6a06bb33a5f95369 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/361634 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: Josip Sokcevic <sokcevic@google.com> Commit-Queue: Mike Frysinger <vapier@google.com>
* Enable use of REPO_CONFIG_DIR to customize .repoconfig locationGavin Mak2023-01-281-1/+3
| | | | | | | | | | For use cases with multiple instances of repo, eg some CI environments. Bug: https://crbug.com/gerrit/15803 Change-Id: I65c1cfc8f6a98adfeb5efefc7ac6b45bf8e134de Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/356719 Tested-by: Gavin Mak <gavinmak@google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* upload: Allow user to configure unusual commit thresholdDavid Greenaway2022-12-121-17/+18
| | | | | | | | | | | Add a per-remote option `uploadwarningthreshold` allowing the user to override how many commits can be uploaded prior to a warning being displayed. Change-Id: Ia7e1b2c7de89a0bf9ca1c24cc83dc595b3667437 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354375 Tested-by: David Greenaway <dgreenaway@google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* release-process: update to use ./release/sign-tag.pyMike Frysinger2022-12-011-17/+10
| | | | | | | | | | We have a helper script for signing releases now, so point the docs to that rather than the multiple manual steps. Change-Id: I309e883dbce1894650e31682d9975cf0d6bdeca3 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/352834 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: Josip Sokcevic <sokcevic@google.com>
* manifest: allow extend-project to override dest-branch and upstreamErik Elmeke2022-09-201-0/+8
| | | | | | | | Bug: https://crbug.com/gerrit/16238 Change-Id: Id6eff34791525b3df690e160c911c0286331984b Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/345144 Tested-by: Erik Elmeke <erik@haleytek.corp-partner.google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* manifest: add submanifest.default_groups attributev2.25LaMont Jones2022-04-291-0/+4
| | | | | | | | | | | When the user does not specify any manifest groups, this allows the parent manifest to indicate which manifest groups should be used for syncing the submanifest. Change-Id: I88806ed35013d13dd2ab3cd245fcd4f9061112c4 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/335474 Tested-by: LaMont Jones <lamontjones@google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* manifest_xml: group for submanifest projectsLaMont Jones2022-02-281-0/+3
| | | | | | | | | | Add all projects in a submanifest to the group submanifest::<path_prefix> for ease in filtering. Change-Id: Ia6f01f9445f4f8d20fda3402f4d5821c43ceaf7f Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/331319 Tested-by: LaMont Jones <lamontjones@google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* Add multi-manifest support with <submanifest> elementv2.22LaMont Jones2022-02-172-1/+69
| | | | | | | | | | | To be addressed in another change: - a partial `repo sync` (with a list of projects/paths to sync) requires `--this-tree-only`. Change-Id: I6c7400bf001540e9d7694fa70934f8f204cb5f57 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/322657 Tested-by: LaMont Jones <lamontjones@google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* init: add an option --enable-git-lfs-filterXD Trol2022-01-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | It was reported that git-lfs did not work with git-repo. Specifically, `git read-tree -u` run by `repo sync` would fail git-lfs's smudge filter. See https://github.com/github/git-lfs/issues/1422. In fact, by the time `git read-tree -u` is run, the repository is not bare. It is just that, the working directory is not the same as the .git directory. git-lfs's filter should work. No one seems to have delved into that issue. Today, with newer versions of git-repo and git-lfs, that issue will not reproduce. Tested with - git 2.33, git-lfs 2.13 on macOS - git 2.17, git-lfs 2.3 on ubuntu So, it seems fine to add an option --enable-git-lfs-filter, default to false, and stat that it may not work with older versions of git and git-lfs in the help doc. Bug: https://crbug.com/gerrit/14516 Change-Id: I8d21854eeeea541e072f63d6b10ad1253b1a9826 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/328359 Tested-by: XD Trol <milestonejxd@gmail.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* Add 'dest-path' to extend-project to support changing pathMichael Kelly2021-09-281-0/+6
| | | | | | | | | | This allows us to move the repository to a new location in the source tree without having to remove-project + add a new project tag. Change-Id: I4dba6151842e57f6f2b8fe60cda260ecea68b7b4 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310962 Reviewed-by: Mike Frysinger <vapier@google.com> Tested-by: Michael Kelly <mkelly@arista.com>
* repo: Add support for standalone manifestsJack Neus2021-09-281-0/+1
| | | | | | | | | | | | | | | | | | Added --standalone_manifest to repo tool. If set, the manifest is downloaded directly from the appropriate source (currently, we only support GS) and used instead of creating a manifest git checkout. The manifests.git repo is still created to keep track of various config but is marked as being for a standalone manifest so that the repo tool doesn't try to run networked git commands in it. BUG=b:192664812 TEST=existing tests (no coverage), manual runs Change-Id: I84378cbc7f8e515eabeccdde9665efc8cd2a9d21 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312942 Tested-by: Jack Neus <jackneus@google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* superproject: support a new revision attribute.Xin Li2021-09-271-2/+8
| | | | | | | | | | | | | | | | | | | | | | | Tested: $ ./run_tests Verified that a manifest that specified superproject revision would use the specified revision, and superproject will use the default revision. Note that this is a slight behavior change from earlier repo versions, which would always use the branch name of the manifest itself. However, the new behavior would be more consisitent with regular "project" element and would allow superproject be used even if it is not enabled for the particular manifest branch, so we have decided to make the change as it would provide more flexibility and better matches what other elements would do. Bug: [google internal] b/187868160 Change-Id: I35255ee347aff6e65179f7879d52931f168b477e Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/317643 Tested-by: Xin Li <delphij@google.com> Reviewed-by: Raman Tenneti <rtenneti@google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* release-process: update distro baseline & add OpenSSHMike Frysinger2021-09-241-61/+108
| | | | | | | | | | | | | Stop tracking Ubuntu Trusty & Xenial and Debian Jessie & Stretch as they only had Python 3.5 available which we've dropped. Backfill OpenSSH versions since we've started testing for it. Change-Id: I03183ed97f6e43dce8a00e36cce2956544a26afc Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/318835 Reviewed-by: Jack Neus <jackneus@google.com> Reviewed-by: Mike Frysinger <vapier@google.com> Tested-by: Mike Frysinger <vapier@google.com>
* docs: Add version for Ubuntu 21.04 Hirsute and Debian 11 BullseyeRoger Shimizu2021-09-031-0/+5
| | | | | | | | | | | * Add footer to the version table, so easier to read and maintain. * Add version entry for Ubuntu 21.04 Hirsute (non-LTS). * Add version entry for Debian 11 Bullseye (LTS). Change-Id: Ic72f911e616b1a13901e56074004f05cdc2c7633 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/313322 Reviewed-by: Xin Li <delphij@google.com> Tested-by: Xin Li <delphij@google.com>
* sync: Added logging of repo sync state and config options for analysis.Raman Tenneti2021-07-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git_config.py: + Added SyncAnalysisState class, which saves the following data into the config object. ++ sys.argv, options, superproject's logging data. ++ repo.*, branch.* and remote.* parameters from config object. ++ current time as synctime. ++ Version number of the object. + All the keys for the above data are prepended with 'repo.syncstate.' + Added GetSyncAnalysisStateData and UpdateSyncAnalysisState methods to GitConfig object to save/get the above data. git_trace2_event_log.py: + Added LogConfigEvents method with code from DefParamRepoEvents to log events. sync.py: + superproject_logging_data is a dictionary that collects all the superproject data that is to be logged as trace2 event. + Sync at the end logs the previously saved syncstate.* parameters as previous_sync_state. Then it calls config's UpdateSyncAnalysisState to save and log all the current options, superproject logged data. docs/internal-fs-layout.md: + Added doc string explaining [repo.syncstate ...] sections of .repo/manifests.git/config file. test_git_config.py: + Added unit test for the new methods of GitConfig object. Tested: $ ./run_tests $ repo_dev init --use-superproject -u https://android.googlesource.com/platform/manifest Tested it by running the following command multiple times. $ repo_dev sync -j 20 repo sync has finished successfully Verified config file has [syncstate ...] data saved. Bug: [google internal] b/188573450 Change-Id: I1f914ce50f3382111b72940ca56de7c41b53d460 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/313123 Tested-by: Raman Tenneti <rtenneti@google.com> Reviewed-by: Mike Frysinger <vapier@google.com> Reviewed-by: Xin Li <delphij@google.com>
* repo: properly handle remote annotations in manifest_xmlJack Neus2021-07-231-7/+7
| | | | | | | | | | BUG=b:192664812 TEST=tests/ Change-Id: I1aa50260f4a00d3cebbd531141e1626825e70127 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/312643 Tested-by: Jack Neus <jackneus@google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* Gracefully ignore bad remove-project lineMichael Kelly2021-07-081-0/+4
| | | | | | | | | | | | | | | | Sometimes, we don't care if the remove project is referring to a non-existing project and we can just ignore it. This change allows us to ignore remove-project entries if the project that they refer to doesn't exist, making them effectively a no-op. Because this change breaks existing configuration, we allow this to be configuration controlled using the `optional` attribute in the remove-project tag. Change-Id: I6313a02983e81344eadcb4e47d7d6b037ee7420e Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/310964 Tested-by: Michael Kelly <mkelly@arista.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* superproject: add projects from local manifest to local::<filename> group.Raman Tenneti2021-06-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With repo sync --use-superproject, don't update the commit ids of every project that comes from local manifest. Tested the code with the following commands. $ ./run_tests -v + Test with local.xml 1. repo init --use-superproject -u persistent-https://googleplex-android.git.corp.google.com/a/platform/manifest 2. cd .repo cp -r /google/src/head/depot/google3/wireless/android/build_tools/translations/pipeline/local_manifests local_manifests cd .. local$ time repo_dev sync --use-superproject NOTICE: --use-superproject is in beta; report any issues to the address described in `repo version` .../local/.repo/exp-superproject/feb2c2847da5e274f3d530d5ab438af8-superproject.git: Initial setup for superproject completed. ... Bug: [google internal] b/189360443 Bug: [google internal] b/189139268 Bug: https://crbug.com/gerrit/14499 Change-Id: Ideaf268c294e9b500b2b9726ffbd733dd8d63004 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/308822 Tested-by: Raman Tenneti <rtenneti@google.com> Reviewed-by: Mike Frysinger <vapier@google.com> Reviewed-by: Jonathan Nieder <jrn@google.com>
* manifest_xml: initial support for <contactinfo>Raman Tenneti2021-05-041-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | It will be used to let manifest authors self-register contact info. This element can be repeated, and any later entries will clobber earlier ones. This would allow manifest authors who extend manifests to specify their own contact info. It would have 1 required attribute: bugurl. "bugurl" specifies the URL to file a bug against the manifest owner. <contactinfo bugurl="bug-url"/> TODO: This CL only implements the parsing logic and further work will be in followup CLs. Tested the code with the following commands. $ ./run_tests tests/test_manifest_xml.py $ ./run_tests -v Bug: [google internal] b/186220520. Change-Id: I47e765ba2dab5cdf850191129f4d4cd6b803f451 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305203 Tested-by: Raman Tenneti <rtenneti@google.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* release-process: document the rate limiting in automatic updatesMike Frysinger2021-05-041-1/+7
| | | | | | | | | We check for updates only once per day, so clarify the docs. Change-Id: Ib669ca6ebc67bc13204996fa40e1a3a82012295e Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/305145 Reviewed-by: Raman Tenneti <rtenneti@google.com> Tested-by: Mike Frysinger <vapier@google.com>
* Update copyfile and linkfile if manifest updatedjiajia tang2021-05-011-0/+2
| | | | | | | | | | | | | | | | | | | | | Currently, copyfiles and linkfiles which marked by "<copyfile/>" and "<linkfile/>" in manifest will be created by first exec 'repo sync'. But if some "<copyfile/>" or "<linkfile/>" are removed in manifest, then 'repo sync', these removed item dest can not be removed in the sourcecode workspace. This patch is intent to fix this issue, by save a 'copy-link-files.json' in .repo and then compared with new dest path when next sync. If any "<copyfile/>" or "<linkfile/>" were removed, the dest path will be removed in sourcecode at the same time. Bug: https://crbug.com/gerrit/11008 Change-Id: I6b7b41e94df0f9e6e52801ec755951a4c572d05d Signed-off-by: jiajia tang <tangjiajia@xiaomi.com> Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/304202 Reviewed-by: Mike Frysinger <vapier@google.com>
* help: switch from formatter module to textwrapMike Frysinger2021-04-141-0/+1
| | | | | | | | | | | | | | | | Since Python has deprecated the formatter module, switch to the textwrap module instead for reflowing text. We weren't really using any other feature anyways. Verified by diffing the output before & after the change and making sure it was the same. Then made a few tweaks to tighten up the output. Change-Id: I0be1bc2a6661a311b1a4693c80d0f8366320ba55 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/303282 Reviewed-by: Raman Tenneti <rtenneti@google.com> Tested-by: Mike Frysinger <vapier@google.com>
* init: Added --partial-clone-exclude option.Raman Tenneti2021-04-131-16/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | partial-clone-exclude option excludes projects during partial clone. This is a comma-delimited project names (from manifest.xml). This option is persisted and it is used by the sync command. A project that has been unparital'ed will remain unpartial if that project's name is specified in the --partial-clone-exclude option. The project name should match exactly. Added $ ./run_tests -v Bug: [google internal] b/175712967 "I can't "unpartial" my androidx-main checkout" $ rm -rf androidx-main/ $ mkdir androidx-main/ $ cd androidx-main/ $ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M -m default.xml $ repo_dev sync -c -j8 + Verify a project is partial $ cd frameworks/support/ $ git config -l | grep 'partial' + Unpartial a project. $ /google/bin/releases/android/git_repack/git_unpartial + Verify project is unpartial $ git config -l | grep 'partial' $ cd ../.. + Exclude the project from being unparial'ed after init and sync. $ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --partial-clone-exclude="platform/frameworks/support,platform/frameworks/support-golden" -m default.xml + Verify project is unpartial $ cd frameworks/support/ $ git config -l | grep 'partial' $ cd ../.. $ repo_dev sync -c -j8 $ cd frameworks/support/ $ git config -l | grep 'partial' $ cd ../.. + Remove the project from exclude list and verify that project is partially cloned. $ repo_dev init -u https://android.googlesource.com/platform/manifest -b androidx-main --partial-clone --clone-filter=blob:limit=10M --partial-clone-exclude= -m default.xml $ repo_dev sync -c -j8 $ cd frameworks/support/ $ git config -l | grep 'partial' Change-Id: Id5dba418eba1d3f54b54e826000406534c0ec196 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/303162 Reviewed-by: Mike Frysinger <vapier@google.com> Tested-by: Raman Tenneti <rtenneti@google.com>
* document the new manifest restrictions on name & path settingsMike Frysinger2021-03-121-2/+23
| | | | | | | | Bug: https://crbug.com/gerrit/14156 Change-Id: I473edab1173e6a266d0754c29d5dc7ff761f1359 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/299403 Reviewed-by: Michael Mortensen <mmortensen@google.com> Tested-by: Mike Frysinger <vapier@google.com>
* docs: add warnings about repos data modelMike Frysinger2021-02-251-2/+22
| | | | | | | | | | For people coming across these docs and thinking that repo's methods are good to replicate, add a note warning them against doing so. Change-Id: I443a783794313851a6e7ba1c39baebac988bff9a Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/298164 Reviewed-by: Michael Mortensen <mmortensen@google.com> Tested-by: Mike Frysinger <vapier@google.com>
* init: added --use-superproject option to clone superproject.v2.12.2Raman Tenneti2021-02-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added --no-use-superproject to repo and init.py to disable use of manifest superprojects. Replaced the term "sha" with "commit id". Added _GetBranch method to Superproject object. Moved shared code between init and sync into SyncSuperproject function. This function either does git clone or git fetch. If git fetch fails it does git clone. Changed Superproject constructor to accept manifest, repodir and branch to avoid passing them to multiple functions as argument. Changed functions that were raising exceptions to return either True or False. Saved the --use-superproject option in config as repo.superproject. Updated internal-fs-layout.md document. Updated the tests to work with the new API changes in Superproject. Performance for the first time sync has improved from 20 minutes to around 15 minutes. Tested the code with the following commands. $ ./run_tests -v Tested the sync code by using repo_dev alias and pointing to this CL. $ repo init took around 20 seconds longer because of cloning of superproject. $ time repo_dev init -u sso://android.git.corp.google.com/platform/manifest -b master --partial-clone --clone-filter=blob:limit=10M --repo-rev=main --use-superproject ... real 0m35.919s user 0m21.947s sys 0m8.977s First run $ time repo sync --use-superproject ... real 16m41.982s user 100m6.916s sys 19m18.753s No difference in repo sync time after the first run. Bug: [google internal] b/179090734 Bug: https://crbug.com/gerrit/13709 Bug: https://crbug.com/gerrit/13707 Change-Id: I12df92112f46e001dfbc6f12cd633c3a15cf924b Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/296382 Reviewed-by: Mike Frysinger <vapier@google.com> Tested-by: Raman Tenneti <rtenneti@google.com>
* manifest_xml: - Added doc and testing of unknown tags/elements.Raman Tenneti2021-01-121-0/+6
| | | | | | | | | | | | | | | | Added this test to verify that older versions of repo can handle "<superproject" element. Tested by adding "<iankaz" unknown element. Tested the code with the following commands. $ ./run_tests tests/test_manifest_xml.py $ ./run_tests -v Bug: https://crbug.com/gerrit/13709 Tested-by: Raman Tenneti <rtenneti@google.com> Change-Id: I858d56f38cefcfcd14474efdd631a5a940c3ce47 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/293482 Reviewed-by: Mike Frysinger <vapier@google.com>
* manifest_xml: initial support for <superproject>Raman Tenneti2021-01-081-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | At most one superproject may be specified. It will be used to specify the URL of superproject. It would have 3 attributes: remote, name, and default. Only "name" is required while the others have reasonable defaults. <remote name="superproject-url" review="<url>" /> <superproject remote="superproject-url" name="platform/superproject"/> TODO: This CL only implements the parsing logic and further work will be in followup CLs. Tested the code with the following commands. $ ./run_tests tests/test_manifest_xml.py $ ./run_tests -v Bug: https://crbug.com/gerrit/13709 Tested-by: Raman Tenneti <rtenneti@google.com> Change-Id: I5b4bba02c8b59601c754cf6b5e4d07a1e16ce167 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/292982 Reviewed-by: Mike Frysinger <vapier@google.com>
* docs: Add Markdown inline code marker around inline XML example.Jashank Jeremy2020-12-131-1/+1
| | | | | | | | | | | Presently, this tag is not rendered --- by Gitiles, at least --- which makes the example very confusing indeed. Signed-off-by: Jashank Jeremy <jashank@rulingia.com.au> Change-Id: Ia76a60d8ee0ecce8ceb32661afbd48f3b2d80fbf Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/291362 Reviewed-by: Mike Frysinger <vapier@google.com> Tested-by: Jashank Jeremy <jashank.jeremy@gmail.com>
* manifest_xml: harmonize list fieldsMike Frysinger2020-12-041-0/+17
| | | | | | | | | | | | | | | We allow project.groups to be whitespace or comma delimited, but repo-hooks.enabled-list is only whitespace delimited. This hasn't been a big deal as it's only ever had one valid value, but if we want to add more, we should harmonize these a bit. Refactor the groups method to be more generic, and run the enabled- list attribute through it. Then add missing docs for it. Change-Id: Iaa96a0faa9c4a68b313b49336751831b73bf855d Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/290743 Reviewed-by: Michael Mortensen <mmortensen@google.com> Tested-by: Mike Frysinger <vapier@google.com>
* manifest: add support for groups in includev2.10Fredrik de Groot2020-11-261-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | Attrib groups can now be added to manifest include, thus all projects in an included manifest file can easily be tagged with a group without modifying all projects in that manifest file. Include groups will add and recurse, meaning included manifest projects will carry all parent includes. Intentionally, no support added for group remove, to keep complexity down. Group handling for projects is untouched, meaning a group set on a project will still append to whatever was or was not inherited in parent manifest includes, resulting in union of groups inherited and set for the project itself. Test: manual multi-level manifest include structure, in serial and parallel, with different groups set on init Test: added unit tests to cover the inheritance Change-Id: Id2229aa6fd78d355ba598cc15c701b2ee71e5c6f Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/283587 Tested-by: Fredrik de Groot <fredrik.de.groot@volvocars.com> Reviewed-by: Mike Frysinger <vapier@google.com>
* switch to "main" branch for developmentMike Frysinger2020-11-165-16/+16
| | | | | | | | | | We're migrating from "master" to "main" as the default development branch. This only affects repo itself, not manifests. Change-Id: I27489dd721c9a467a1c43736808cb3b3c1365433 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/288082 Reviewed-by: Michael Mortensen <mmortensen@google.com> Tested-by: Mike Frysinger <vapier@google.com>
* manifest: drop support for local_manifest.xmlMike Frysinger2020-09-081-7/+1
| | | | | | | | | | We deprecated this 8 years ago. Time to drop it to simplify the code as it'll help with refactoring in this module to not migrate it. Change-Id: I2deae5496d1f66a4491408fcdc95cd527062f8b6 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/280798 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: Michael Mortensen <mmortensen@google.com>
* release-process: document schedule (including freezes) publiclyMike Frysinger2020-07-231-0/+32
| | | | | | | Change-Id: Ic037b54630017740d7859292b32b8c57f4af7854 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/274772 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: Jonathan Nieder <jrn@google.com>
* Make partial clone imply no-clone-bundle by default.Xin Li2020-05-211-0/+1
| | | | | | | | | | | | | | | | | | For large projects, clone bundle is useful because it provided a way to efficiently transfer a large portion of git objects through CDN, without needing to interact with git server. However, with partial clones, the intention is to not download most of the objects, so the use of clone bundles would defeat the space savings normally seen with partial clones, as they are downloaded before the first fetch. A new option, --clone-bundle is added to override this behavior. Add a new repo.clonebundle variable which remembers the choice if explicitly given from command line at repo init. Change-Id: I03638474af303a82af34579e16cd4700690b5f43 Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/268452 Tested-by: Xin Li <delphij@google.com> Reviewed-by: Jonathan Nieder <jrn@google.com>
* init: rename --repo-branch to --repo-revMike Frysinger2020-03-182-4/+4
| | | | | | | | | | | | We refer to this as "revision" in help text, and in REPO_REV envvar, so rename to --repo-rev to be consistent. We keep --repo-branch for backwards compatibility, but as a hidden option. Bug: https://crbug.com/gerrit/11045 Change-Id: I1ecc282fba32917ed78a63850360c08469db849a Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259352 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: David Pursehouse <dpursehouse@collab.net>
* upload: add config setting for upload notificationsMike Frysinger2020-03-151-0/+2
| | | | | | | | | | This allows people to set default e-mail notifications via gitconfig. Bug: https://crbug.com/gerrit/12451 Change-Id: Ic04ea3b7df0c5603c491961112c5be8cabb9dddd Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/259014 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: David Pursehouse <dpursehouse@collab.net>
* upload: allow users to set labels when uploadingMike Frysinger2020-02-241-1/+2
| | | | | | | | | Bug: https://crbug.com/gerrit/11801 Change-Id: I060465105b4e68ddfc815e572f62bf5dac2c1ffd Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256614 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: David Pursehouse <dpursehouse@collab.net>
* docs: update Windows infoMike Frysinger2020-02-221-4/+29
| | | | | | | | | | Add a section on worktrees to avoid symlink problems, and note that Python 3 is now a hard requirement. Change-Id: I83811db88692127c40cec8270f6f9486c639dc3f Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/256314 Tested-by: Mike Frysinger <vapier@google.com> Reviewed-by: David Pursehouse <dpursehouse@collab.net>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-06-01 07:34:24 +0000