2 files changed, 65 insertions, 0 deletions

diff --git a/dynamic-layers/arm-toolchain/recipes-bsp/imx-system-manager/imx-system-manager.inc b/dynamic-layers/arm-toolchain/recipes-bsp/imx-system-manager/imx-system-manager.inc
new file mode 100644
index 00000000..23d5bfc2
--- /dev/null
+++ b/dynamic-layers/arm-toolchain/recipes-bsp/imx-system-manager/imx-system-manager.inc
@@ -0,0 +1,42 @@
+# Set generic compiler for system manager core
+INHIBIT_DEFAULT_DEPS = "1"
+DEPENDS = "${SM_COMPILER}"
+SM_COMPILER ?= "gcc-arm-none-eabi-native"
+PROVIDES += "virtual/imx-system-manager"
+
+inherit deploy
+
+# Set monitor mode for none, one, or two
+PACKAGECONFIG[m0] = "M=0,,,,,m1 m2"
+PACKAGECONFIG[m1] = ",,,,,m0 m2"
+PACKAGECONFIG[m2] = "M=2,,,,,m0 m1"
+
+SYSTEM_MANAGER_CONFIG ?= "INVALID"
+
+LDFLAGS[unexport] = "1"
+
+EXTRA_OEMAKE = " \
+    V=y \
+    SM_CROSS_COMPILE=arm-none-eabi- \
+    ${PACKAGECONFIG_CONFARGS} \
+"
+
+do_configure() {
+    oe_runmake config=${SYSTEM_MANAGER_CONFIG} clean
+    oe_runmake config=${SYSTEM_MANAGER_CONFIG} cfg
+}
+
+do_compile() {
+    oe_runmake config=${SYSTEM_MANAGER_CONFIG}
+}
+
+do_install[noexec] = "1"
+
+addtask deploy after do_compile
+do_deploy() {
+    install -D -p -m 0644 \
+        ${B}/build/${SYSTEM_MANAGER_CONFIG}/${SYSTEM_MANAGER_FIRMWARE_BASENAME}.bin \
+        ${DEPLOYDIR}/${SYSTEM_MANAGER_FIRMWARE_BASENAME}-${SYSTEM_MANAGER_CONFIG}.bin
+}
+
+COMPATIBLE_MACHINE = "(mx95-generic-bsp)"
diff --git a/dynamic-layers/arm-toolchain/recipes-bsp/imx-system-manager/imx-system-manager_1.0.0.bb b/dynamic-layers/arm-toolchain/recipes-bsp/imx-system-manager/imx-system-manager_1.0.0.bb
new file mode 100644
index 00000000..eceaaa67
--- /dev/null
+++ b/dynamic-layers/arm-toolchain/recipes-bsp/imx-system-manager/imx-system-manager_1.0.0.bb
@@ -0,0 +1,23 @@
+SUMMARY = "i.MX System Manager Firmware"
+DESCRIPTION = "\
+The System Manager (SM) is a firmware that runs on a Cortex-M processor on \
+many NXP i.MX processors. The Cortex-M is the boot core, runs the boot ROM \
+which loads the SM (and other boot code), and then branches to the SM. The \
+SM then configures some aspects of the hardware such as isolation mechanisms \
+and then starts other cores in the system. After starting these cores, it \
+enters a service mode where it provides access to clocking, power, sensor, \
+and pin control via a client RPC API based on ARM's System Control and \
+Management Interface (SCMI)."
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=b66f32a90f9577a5a3255c21d79bc619"
+
+SRC_URI = "${IMX_SYSTEM_MANAGER_SRC};branch=${SRCBRANCH}"
+IMX_SYSTEM_MANAGER_SRC ?= "git://github.com/nxp-imx/imx-sm.git;protocol=https"
+SRCBRANCH = "master"
+SRCREV = "709deccd9338399eb39b5cf99a60eab4fa60d539"
+
+S = "${WORKDIR}/git"
+
+require imx-system-manager.inc
+
+PACKAGECONFIG ??= "m2"