summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* rpi-config_git: Added ENABLE_DUAL_CAN build configurationcolin2020-07-231-1/+6
| | | | | | | | | | Currently ENABLE_CAN adds mcp2525-can0 to the dtoverlay. ENABLE_DUAL_CAN was added to also add mcp2515-can1 to the dtoverlay. This will allow a user to enable dual CAN when using a hat like the PiCAN 2 Duo board. Signed-off-by: Colin McAllister <colinmca242@gmail.com>
* conf/machine/include/rpi-base.inc: Added can1 interface to bspcolin2020-07-231-0/+1
| | | | | | | | | The device tree only supports a single CAN interface. This prevents compatiblity with dual-CAN boards like the PiCAN2 Duo. The mcp2515-can1 device tree blob for overlay was added to RPI_KERNEL_DEVICETREE_OVERLAYS in order to support dual-CAN hats. Signed-off-by: Colin McAllister <colinmca242@gmail.com>
* rpi-base: add SERIAL_CONSOLES_CHECK to default to SERIAL_CONSOLESChristopher Clark2020-07-171-0/+1
| | | | | | | | As per the example in the bsp-guide, and the qemu and other machine configs. Assists when running virtualized, where serial console device can differ. Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
* userland: Update to 2020-06-24 top commitKhem Raj2020-07-1422-78/+144
| | | | | | Forward port patches Signed-off-by: Khem Raj <raj.khem@gmail.com>
* raspberrypi-firmware: update to current HEADPierre-Jean Texier2020-07-141-4/+4
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* linux-raspberrypi: bump to Linux version 5.4.51Pierre-Jean Texier2020-07-141-2/+2
| | | | | | | | | Fixes: ERROR: linux-raspberrypi-1_5.4.50+gitAUTOINC+856e83151c-r0 do_fetch: Fetcher failure: Unable to find revision 856e83151cf3f802c495585ac176bb135a08030f in branch rpi-5.4.y even from upstream ERROR: linux-raspberrypi-1_5.4.50+gitAUTOINC+856e83151c-r0 do_fetch: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;branch=rpi-5.4.y'. Unable to fetch URL from any source. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* linux-raspberrypi: bump to 5.4.50 since upstream was force-pushedChristopher Clark2020-07-081-2/+2
| | | | Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
* libubootenv_%.bbappend: Add fw_env.configLeon Anavi2020-07-032-0/+13
| | | | | | | | | Add fw_env.config that uses at run-time /boot/uboot.env generated through the boot scripts (specifically boot.cmd.in) from recipe rpi-u-boot-scr. This configuration file is required to successfully run fw_printenv from the user space. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* rpi-u-boot-scr: Create uboot.env via boot.cmd.inLeon Anavi2020-07-031-0/+1
| | | | | | | | Modify boot.cmd.in from recipe rpi-u-boot-scr to create uboot.env in the /boot partition when using U-Boot. This change is required to successfully run fw_printenv from the user space. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* lirc: Rename bbappend to match only version 0.10.1Leon Anavi2020-06-251-0/+0
| | | | | | | Rename LIRC bbappend file to match only version 0.10.1 because the applied patch is not compatible with older LIRC versions. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* docs/extra-build-config.md: InfraredLeon Anavi2020-06-241-0/+12
| | | | | | | Add instructions how to use variable ENABLE_IR for infrared support, for example with LIRC. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* lirc_%.bbappend: Use lircd.service as in RaspbianLeon Anavi2020-06-242-0/+12
| | | | | | | | | | | Use lircd systemd service similar to the one in Raspbian. Start lircd with argument --nodaemon after lircd-setup.service. Edit device in /etc/lirc/lirc_options.conf to switch between receive and transmit modes (lircd must be restarted after such change). Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* rpi-base.inc: Include modules if IR is enabledLeon Anavi2020-06-241-0/+1
| | | | | | | | | | | | | Add kernel modules gpio-ir and gpio-ir-tx to variable MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_IR is set to 1. Variable ENABLE_IR enables infrared support (for LIRC). This change affects images based on packagegroup-core-boot, including the core-image-minimal image. For other images (based on packagegroup-base) kernel modules are provide through variable MACHINE_EXTRA_RRECOMMENDS. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* rpi-config: Add ENABLE_IR variable for infraredLeon Anavi2020-06-241-0/+9
| | | | | | | | | | | | | | Users who want infrared device tree overlays gpio-ir and gpio-ir-tx to be set in config.txt can now easily do it through variable ENABLE_IR, for example in local.conf: ENABLE_IR = "1" By default the GPIO pin for gpio-ir is set to 18 and the pin for gpio-ir-tx is 17. Both pins can be easily changed by modifying variables GPIO_IR and GPIO_IR_TX (for example in local.conf). Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* lirc: Move to dynamic-layersLeon Anavi2020-06-242-0/+0
| | | | | | | | | Move lirc to dynamic-layers/meta-python/recipes-connectivity/ to avoid related issues while building rpi-basic-image. Reported-by: Alan <engineer@iotexpert.com> Suggested-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* packagegroup-rpi-test: resolve `wireless-regdb` conflictJon Magnuson2020-06-241-1/+1
| | | | | | | | Replaces `wireless-regdb` with `wireless-regdb-static` provided by poky. Fixes #639. Signed-off-by: Jon Magnuson <jon.magnuson@gmail.com>
* Update layer-contents.md to include pi4M. ter Woord2020-06-211-0/+2
| | | | Signed-off-by: Matthijs ter Woord <matthijsterwoord@gmail.com>
* linux-raspberrypi_5.4.bb: Upgrade to 5.4.47Khem Raj2020-06-212-12/+12
| | | | | | | | Drop backported patches which are already in this release Fixes Issue #658 Signed-off-by: Khem Raj <raj.khem@gmail.com>
* lirc_%.bbappend: Fix for gpio-irLeon Anavi2020-06-172-0/+180
| | | | | | | | | | | | | | | Apply Raspberry Pi specific fix to use LIRC with gpio-ir kernel module with which the signal from /dev/lircX is slightly different from that of lirc_dev (which was used with older LIRC and kernel versions). The patch has been published by neuralassembly and he has shared more details in the Raspberry Pi community forum: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=235256 LIRC ticket #359 tracks the upstreaming of this issue: https://sourceforge.net/p/lirc/tickets/359/ Co-authored-by: neuralassembly <neuralassembly@gmail.com> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* linux-raspberrypi_5.4.bb: Move to 5.4.45Khem Raj2020-06-131-2/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi: bump to Linux version 4.19.126Pierre-Jean Texier2020-06-051-2/+2
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* raspberrypi-firmware: update to current HEADPierre-Jean Texier2020-06-051-4/+4
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* rpi-base.inc: Add infrared dtboLeon Anavi2020-06-041-0/+2
| | | | | | | Add device tree binary overlays gpio-ir-tx and gpio-ir-tx to support peripherals for sending and receiving infrared signals. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* docs: Remove reference to xz-compressed sdimgBrandon Verkamp2020-05-221-2/+2
|
* docs: Correct Quick Start instructions to show the new .wic.bz2 extensionBrandon Verkamp2020-05-221-4/+4
| | | | | | | Corrects README.md to indicate that the new generated image extension is .wic.bz2 rather than sdimg as previously stated. Signed-off-by: Brandon Verkamp <jadelclemens@gmail.com>
* linux-raspberrypi: Update to latest on 5.4 releaseKhem Raj2020-05-201-2/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi_5.4.bb: Update to 5.4.35Khem Raj2020-05-091-2/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi: bump to Linux version 4.19.120Pierre-Jean Texier2020-05-091-2/+2
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* raspberrypi-firmware: update to current HEADPierre-Jean Texier2020-05-091-4/+4
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* rpi-base.inc: Include modules if I2C is enaledLeon Anavi2020-04-281-1/+3
| | | | | | | | | | | | Add kernel modules i2c-dev and i2c-bcm2708 to variable MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_I2C is set to 1. This affects images based on packagegroup-core-boot, including the core-image-minimal image. For other images (based on packagegroup-base) kernel modules are provide through variable MACHINE_EXTRA_RRECOMMENDS. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* linux-raspberrypi_5.4.bb: Update to latestKhem Raj2020-04-281-1/+1
| | | | | | brings in some pinmux and dtoverlays Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi_5.4.bb: Update to latestBartłomiej Burdukiewicz2020-04-271-2/+2
| | | | Signed-off-by: Bartłomiej Burdukiewicz <bartlomiej.burdukiewicz@gmail.com>
* psplash: Do not define ALTERNATIVE_PRIORITY for non-existing providerKhem Raj2020-04-201-2/+1
| | | | | | | | This simply causes build warnings about priority of two packages being same, but infact this is redundant, therefore remove setting ALTERNATIVE_PRIORITY for psplash-raspberrypi Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-firmware-rpidistro: Upgrade to 20190114-1+rpt6Khem Raj2020-04-201-2/+2
| | | | | | Adjust PV to reflect the release and make it a bit meaningful Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi: bump to Linux version 4.19.115Pierre-Jean Texier2020-04-181-2/+2
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* raspberrypi-firmware: update to current HEADPierre-Jean Texier2020-04-181-4/+4
| | | | Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* linux-raspberrypi_5.4.bb: Update to latestKhem Raj2020-04-161-1/+1
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* rpi-base.inc: Add kernel modules to all imagesLeon Anavi2020-04-151-1/+1
| | | | | | | | | | | | | | Add kernel modules, including i2c-dev and i2c-bcm2708, to variable MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS. This way kernel modules will be present in all images based on packagegroup-core-boot, including the core-image-minimal image. Otherwise, if modules, are in variable MACHINE_EXTRA_RRECOMMENDS they will be added only in images based on packagegroup-base, which does not include the core-image-minimal or core-image-full-cmdline images. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* raspberrypi3: Switch to vc4-fkms-v3d.Drew Moseley2020-04-152-0/+2
| | | | | | This seems to be required to have a functional DSI display. Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
* linux-raspberrypi_5.4.bb: Backport the patch to use CHECK macro instead of ↵Khem Raj2020-04-154-18/+142
| | | | | | | | | | | | RET_IF Revert couple of regressions for selftest Fixes | /usr/src/debug/kernel-selftest/1.0-r0/kernel-selftest-1.0/tools/testing/selftests/bpf/test_select_reuseport.c:671: undefined reference to `RET_IF' Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi_5.4.bb: Enable powersave options in kconfigKhem Raj2020-04-082-0/+14
| | | | | | | | Will let system hibernate and suspend, its initial setup, there is more work needed to get it going fully without problems in userspace, which will follow Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi_5.4.bb: Update to latest and fix build with binutils 2.34Khem Raj2020-04-081-1/+4
| | | | | | | | | perf fails to build without bfd patch still, therefore apply it to 5.4 as well. Update to latest on 5.4 branch Signed-off-by: Khem Raj <raj.khem@gmail.com>
* linux-raspberrypi: Add recipes for kernel 5.4Khem Raj2020-04-082-0/+18
| | | | | | | 5.4 is slated to be next hop for linux-raspberrypi, here add the recipes, default is still 4.19, we can switch that later Signed-off-by: Khem Raj <raj.khem@gmail.com>
* rpi-base: Drop old dtbo namesKhem Raj2020-04-081-2/+0
| | | | | | | | pi3-disable-bt is renamed to disable-bt and pi3-miniuart-bt is renamed to miniuart-bt in 2014, now with 5.4 these are not recognised anymore and miniuart-bt and disable-bt are already part of RPI_KERNEL_DEVICETREE_OVERLAYS Signed-off-by: Khem Raj <raj.khem@gmail.com>
* userland: Fix build with gcc10Khem Raj2020-04-032-0/+33
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* userland: Update to 20200316 snapshotKhem Raj2020-04-0321-125/+71
| | | | | | | | | - Refresh patches - userland now needs to create symlinks for egl.pc,glesv2.pc and vg.pc when vc4 is not used Signed-off-by: Khem Raj <raj.khem@gmail.com>
* qtbase: Drop xkb packageconfigKhem Raj2020-04-031-1/+1
| | | | | | meta-qt5 master has dropped it too Signed-off-by: Khem Raj <raj.khem@gmail.com>
* rpi-u-boot-scr: Set u-boot-default-script as providerFabio Berton2020-04-034-2/+6
| | | | | | | | | Add u-boot-default-script to the PROVIDES variable to make easier to replace boot script in another layer just by changing PREFERRED_PROVIDER_u-boot-default-script variable. Set rpi-u-boot-scr as the default provider for meta-raspberrypi. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
* docs/extra-build-config.md: Auto-load I2C modulesLeon Anavi2020-04-031-0/+4
| | | | | | | Add instructions how to auto-load I2C kernel modules with KERNEL_MODULE_AUTOLOAD when I2C is enabled. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
* qtbase: Append userland to rdeps iff vc4graphics is not enabledKhem Raj2020-03-311-1/+1
| | | | | | | This avoids adding unnessary dependency at runtime on userland graphics package when vc4 driver is used Signed-off-by: Khem Raj <raj.khem@gmail.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-06-28 07:12:01 +0000