1 files changed, 0 insertions, 274 deletions
diff --git a/recipes-networking/openvswitch/files/openvswitch-controller b/recipes-networking/openvswitch/files/openvswitch-controller
deleted file mode 100755
index 026974a7..00000000
--- a/recipes-networking/openvswitch/files/openvswitch-controller
+++ /dev/null
@@ -1,274 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2011 Nicira Networks Inc.
-# Copyright (c) 2007, 2009 Javier Fernandez-Sanguino <jfs@debian.org>
-#
-# This is free software; you may redistribute it and/or modify
-# it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2,
-# or (at your option) any later version.
-#
-# This is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License with
-# the Debian operating system, in /usr/share/common-licenses/GPL;  if
-# not, write to the Free Software Foundation, Inc., 59 Temple Place,
-# Suite 330, Boston, MA 02111-1307 USA
-#
-### BEGIN INIT INFO
-# Provides:          openvswitch-controller
-# Required-Start:    $network $local_fs $remote_fs
-# Required-Stop:     $remote_fs
-# Should-Start:      $named
-# Should-Stop:       
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: Open vSwitch controller
-### END INIT INFO
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-DAEMON=/usr/bin/ovs-controller # Introduce the server's location here
-NAME=ovs-controller         # Introduce the short server's name here
-DESC=ovs-controller         # Introduce a short description here
-LOGDIR=/var/log/openvswitch # Log directory to use
-PIDFILE=/var/run/openvswitch/$NAME.pid 
-test -x $DAEMON || exit 0
-. /lib/lsb/init-functions
-# Default options, these can be overriden by the information
-# at /etc/default/openvswitch-controller
-DAEMON_OPTS=""          # Additional options given to the server 
-DODTIME=10              # Time to wait for the server to die, in seconds
-                        # If this value is set too low you might not
-                        # let some servers to die gracefully and
-                        # 'restart' will not work
-                        
-LOGFILE=$LOGDIR/$NAME.log  # Server logfile
-#DAEMONUSER=            # User to run the daemons as. If this value
-                        # is set start-stop-daemon will chuid the server
-# Include defaults if available
-default=/etc/default/openvswitch-controller
-if [ -f $default ] ; then
-    . $default
-fi
-# Check that the user exists (if we set a user)
-# Does the user exist?
-if [ -n "$DAEMONUSER" ] ; then
-    if getent passwd | grep -q "^$DAEMONUSER:"; then
-        # Obtain the uid and gid
-        DAEMONUID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $3}'`
-        DAEMONGID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $4}'`
-    else
-        log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist."
-        exit 1
-    fi
-fi
-set -e
-running_pid() {
-# Check if a given process pid's cmdline matches a given name
-    pid=$1
-    name=$2
-    [ -z "$pid" ] && return 1 
-    [ ! -d /proc/$pid ] &&  return 1
-    cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
-    # Is this the expected server
-    [ "$cmd" != "$name" ] &&  return 1
-    return 0
-}
-running() {
-# Check if the process is running looking at /proc
-# (works for all users)
-    # No pidfile, probably no daemon present
-    [ ! -f "$PIDFILE" ] && return 1
-    pid=`cat $PIDFILE`
-    running_pid $pid $DAEMON || return 1
-    return 0
-}
-start_server() {
-    if [ -z "$LISTEN" ]; then
-        echo "$default: No connection methods configured, controller disabled" >&2
-        exit 0
-    fi
-    if [ ! -d /var/run/openvswitch ]; then
-        install -d -m 755 -o root -g root /var/run/openvswitch
-    fi
-    SSL_OPTS=
-    case $LISTEN in
-        *ssl*)
-            : ${PRIVKEY:=/etc/openvswitch-controller/privkey.pem}
-            : ${CERT:=/etc/openvswitch-controller/cert.pem}
-            : ${CACERT:=/etc/openvswitch-controller/cacert.pem}
-            if test ! -e "$PRIVKEY" || test ! -e "$CERT" ||
-                test ! -e "$CACERT"; then
-                if test ! -e "$PRIVKEY"; then
-                    echo "$PRIVKEY: private key missing" >&2
-                fi
-                if test ! -e "$CERT"; then
-                    echo "$CERT: certificate for private key missing" >&2
-                fi
-                if test ! -e "$CACERT"; then
-                    echo "$CACERT: CA certificate missing" >&2
-                fi
-                exit 1
-            fi
-            SSL_OPTS="--private-key=$PRIVKEY --certificate=$CERT --ca-cert=$CACERT"
-            ;;
-    esac
-# Start the process using the wrapper
-        if [ -z "$DAEMONUSER" ] ; then
-            start-stop-daemon --start --pidfile $PIDFILE \
-                        --exec $DAEMON -- --detach --pidfile=$PIDFILE \
-                        $LISTEN $DAEMON_OPTS $SSL_OPTS
-            errcode=$?
-        else
-# if we are using a daemonuser then change the user id
-            start-stop-daemon --start --quiet --pidfile $PIDFILE \
-                        --chuid $DAEMONUSER --exec $DAEMON -- \
-                        --detach --pidfile=$PIDFILE $LISTEN $DAEMON_OPTS \
-                        $SSL_OPTS
-            errcode=$?
-        fi
-        return $errcode
-}
-stop_server() {
-# Stop the process using the wrapper
-        if [ -z "$DAEMONUSER" ] ; then
-            start-stop-daemon --stop --quiet --pidfile $PIDFILE \
-                        --exec $DAEMON
-            errcode=$?
-        else
-# if we are using a daemonuser then look for process that match
-            start-stop-daemon --stop --quiet --pidfile $PIDFILE \
-                        --user $DAEMONUSER --exec $DAEMON
-            errcode=$?
-        fi
-        return $errcode
-}
-reload_server() {
-    [ ! -f "$PIDFILE" ] && return 1
-    pid=`cat $PIDFILE` # This is the daemon's pid
-    # Send a SIGHUP
-    kill -1 $pid
-    return $?
-}
-force_stop() {
-# Force the process to die killing it manually
-    [ ! -e "$PIDFILE" ] && return
-    if running ; then
-        kill -15 $pid
-        # Is it really dead?
-        sleep "$DODTIME"
-        if running ; then
-            kill -9 $pid
-            sleep "$DODTIME"
-            if running ; then
-                echo "Cannot kill $NAME (pid=$pid)!"
-                exit 1
-            fi
-        fi
-    fi
-    rm -f $PIDFILE
-}
-case "$1" in
-  start)
-        log_begin_msg "Starting $DESC " "$NAME"
-        # Check if it's running first
-        if running ;  then
-            log_warning_msg "apparently already running"
-            log_end_msg 0
-            exit 0
-        fi
-        if start_server && running ;  then
-            # It's ok, the server started and is running
-            log_end_msg 0
-        else
-            # Either we could not start it or it is not running
-            # after we did
-            # NOTE: Some servers might die some time after they start,
-            # this code does not try to detect this and might give
-            # a false positive (use 'status' for that)
-            log_end_msg 1
-        fi
-        ;;
-  stop)
-        log_begin_msg "Stopping $DESC" "$NAME"
-        if running ; then
-            # Only stop the server if we see it running
-            stop_server
-            log_end_msg $?
-        else
-            # If it's not running don't do anything
-            log_warning_msg "apparently not running"
-            log_end_msg 0
-            exit 0
-        fi
-        ;;
-  force-stop)
-        # First try to stop gracefully the program
-        $0 stop
-        if running; then
-            # If it's still running try to kill it more forcefully
-            log_begin_msg "Stopping (force) $DESC" "$NAME"
-            force_stop
-            log_end_msg $?
-        fi
-        ;;
-  restart|force-reload)
-        log_begin_msg "Restarting $DESC" "$NAME"
-        stop_server
-        # Wait some sensible amount, some server need this
-        [ -n "$DODTIME" ] && sleep $DODTIME
-        start_server
-        running
-        log_end_msg $?
-        ;;
-  status)
-        log_begin_msg "Checking status of $DESC" "$NAME"
-        if running ;  then
-            log_begin_msg "running"
-            log_end_msg 0
-        else
-            log_warning_msg "apparently not running"
-            log_end_msg 1
-            exit 1
-        fi
-        ;;
-  # Use this if the daemon cannot reload
-  reload)
-        log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon"
-        log_warning_msg "cannot re-read the config file (use restart)."
-        ;;
-  *)
-        N=/etc/init.d/openvswitch-controller
-        echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2
-        exit 1
-        ;;
-esac
-exit 0

diff --git a/recipes-networking/openvswitch/files/openvswitch-controller b/recipes-networking/openvswitch/files/openvswitch-controller deleted file mode 100755 index 026974a7..00000000 --- a/recipes-networking/openvswitch/files/openvswitch-controller +++ /dev/null
@@ -1,274 +0,0 @@
1	#!/bin/sh
2	#
3	# Copyright (c) 2011 Nicira Networks Inc.
4	# Copyright (c) 2007, 2009 Javier Fernandez-Sanguino <jfs@debian.org>
5	#
6	# This is free software; you may redistribute it and/or modify
7	# it under the terms of the GNU General Public License as
8	# published by the Free Software Foundation; either version 2,
9	# or (at your option) any later version.
10	#
11	# This is distributed in the hope that it will be useful, but
12	# WITHOUT ANY WARRANTY; without even the implied warranty of
13	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14	# GNU General Public License for more details.
15	#
16	# You should have received a copy of the GNU General Public License with
17	# the Debian operating system, in /usr/share/common-licenses/GPL; if
18	# not, write to the Free Software Foundation, Inc., 59 Temple Place,
19	# Suite 330, Boston, MA 02111-1307 USA
20	#
21	### BEGIN INIT INFO
22	# Provides: openvswitch-controller
23	# Required-Start: $network $local_fs $remote_fs
24	# Required-Stop: $remote_fs
25	# Should-Start: $named
26	# Should-Stop:
27	# Default-Start: 2 3 4 5
28	# Default-Stop: 0 1 6
29	# Short-Description: Open vSwitch controller
30	### END INIT INFO
31
32	PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
33
34	DAEMON=/usr/bin/ovs-controller # Introduce the server's location here
35	NAME=ovs-controller # Introduce the short server's name here
36	DESC=ovs-controller # Introduce a short description here
37	LOGDIR=/var/log/openvswitch # Log directory to use
38
39	PIDFILE=/var/run/openvswitch/$NAME.pid
40
41	test -x $DAEMON \|\| exit 0
42
43	. /lib/lsb/init-functions
44
45	# Default options, these can be overriden by the information
46	# at /etc/default/openvswitch-controller
47	DAEMON_OPTS="" # Additional options given to the server
48
49	DODTIME=10 # Time to wait for the server to die, in seconds
50	# If this value is set too low you might not
51	# let some servers to die gracefully and
52	# 'restart' will not work
53
54	LOGFILE=$LOGDIR/$NAME.log # Server logfile
55	#DAEMONUSER= # User to run the daemons as. If this value
56	# is set start-stop-daemon will chuid the server
57
58	# Include defaults if available
59	default=/etc/default/openvswitch-controller
60	if [ -f $default ] ; then
61	. $default
62	fi
63
64	# Check that the user exists (if we set a user)
65	# Does the user exist?
66	if [ -n "$DAEMONUSER" ] ; then
67	if getent passwd \| grep -q "^$DAEMONUSER:"; then
68	# Obtain the uid and gid
69	DAEMONUID=`getent passwd \|grep "^$DAEMONUSER:" \| awk -F : '{print $3}'`
70	DAEMONGID=`getent passwd \|grep "^$DAEMONUSER:" \| awk -F : '{print $4}'`
71	else
72	log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist."
73	exit 1
74	fi
75	fi
76
77
78	set -e
79
80	running_pid() {
81	# Check if a given process pid's cmdline matches a given name
82	pid=$1
83	name=$2
84	[ -z "$pid" ] && return 1
85	[ ! -d /proc/$pid ] && return 1
86	cmd=`cat /proc/$pid/cmdline \| tr "\000" "\n"\|head -n 1 \|cut -d : -f 1`
87	# Is this the expected server
88	[ "$cmd" != "$name" ] && return 1
89	return 0
90	}
91
92	running() {
93	# Check if the process is running looking at /proc
94	# (works for all users)
95
96	# No pidfile, probably no daemon present
97	[ ! -f "$PIDFILE" ] && return 1
98	pid=`cat $PIDFILE`
99	running_pid $pid $DAEMON \|\| return 1
100	return 0
101	}
102
103	start_server() {
104	if [ -z "$LISTEN" ]; then
105	echo "$default: No connection methods configured, controller disabled" >&2
106	exit 0
107	fi
108
109	if [ ! -d /var/run/openvswitch ]; then
110	install -d -m 755 -o root -g root /var/run/openvswitch
111	fi
112
113	SSL_OPTS=
114	case $LISTEN in
115	ssl)
116	: ${PRIVKEY:=/etc/openvswitch-controller/privkey.pem}
117	: ${CERT:=/etc/openvswitch-controller/cert.pem}
118	: ${CACERT:=/etc/openvswitch-controller/cacert.pem}
119	if test ! -e "$PRIVKEY" \|\| test ! -e "$CERT" \|\|
120	test ! -e "$CACERT"; then
121	if test ! -e "$PRIVKEY"; then
122	echo "$PRIVKEY: private key missing" >&2
123	fi
124	if test ! -e "$CERT"; then
125	echo "$CERT: certificate for private key missing" >&2
126	fi
127	if test ! -e "$CACERT"; then
128	echo "$CACERT: CA certificate missing" >&2
129	fi
130	exit 1
131	fi
132	SSL_OPTS="--private-key=$PRIVKEY --certificate=$CERT --ca-cert=$CACERT"
133	;;
134	esac
135
136	# Start the process using the wrapper
137	if [ -z "$DAEMONUSER" ] ; then
138	start-stop-daemon --start --pidfile $PIDFILE \
139	--exec $DAEMON -- --detach --pidfile=$PIDFILE \
140	$LISTEN $DAEMON_OPTS $SSL_OPTS
141	errcode=$?
142	else
143	# if we are using a daemonuser then change the user id
144	start-stop-daemon --start --quiet --pidfile $PIDFILE \
145	--chuid $DAEMONUSER --exec $DAEMON -- \
146	--detach --pidfile=$PIDFILE $LISTEN $DAEMON_OPTS \
147	$SSL_OPTS
148	errcode=$?
149	fi
150	return $errcode
151	}
152
153	stop_server() {
154	# Stop the process using the wrapper
155	if [ -z "$DAEMONUSER" ] ; then
156	start-stop-daemon --stop --quiet --pidfile $PIDFILE \
157	--exec $DAEMON
158	errcode=$?
159	else
160	# if we are using a daemonuser then look for process that match
161	start-stop-daemon --stop --quiet --pidfile $PIDFILE \
162	--user $DAEMONUSER --exec $DAEMON
163	errcode=$?
164	fi
165
166	return $errcode
167	}
168
169	reload_server() {
170	[ ! -f "$PIDFILE" ] && return 1
171	pid=`cat $PIDFILE` # This is the daemon's pid
172	# Send a SIGHUP
173	kill -1 $pid
174	return $?
175	}
176
177	force_stop() {
178	# Force the process to die killing it manually
179	[ ! -e "$PIDFILE" ] && return
180	if running ; then
181	kill -15 $pid
182	# Is it really dead?
183	sleep "$DODTIME"
184	if running ; then
185	kill -9 $pid
186	sleep "$DODTIME"
187	if running ; then
188	echo "Cannot kill $NAME (pid=$pid)!"
189	exit 1
190	fi
191	fi
192	fi
193	rm -f $PIDFILE
194	}
195
196
197	case "$1" in
198	start)
199	log_begin_msg "Starting $DESC " "$NAME"
200	# Check if it's running first
201	if running ; then
202	log_warning_msg "apparently already running"
203	log_end_msg 0
204	exit 0
205	fi
206	if start_server && running ; then
207	# It's ok, the server started and is running
208	log_end_msg 0
209	else
210	# Either we could not start it or it is not running
211	# after we did
212	# NOTE: Some servers might die some time after they start,
213	# this code does not try to detect this and might give
214	# a false positive (use 'status' for that)
215	log_end_msg 1
216	fi
217	;;
218	stop)
219	log_begin_msg "Stopping $DESC" "$NAME"
220	if running ; then
221	# Only stop the server if we see it running
222	stop_server
223	log_end_msg $?
224	else
225	# If it's not running don't do anything
226	log_warning_msg "apparently not running"
227	log_end_msg 0
228	exit 0
229	fi
230	;;
231	force-stop)
232	# First try to stop gracefully the program
233	$0 stop
234	if running; then
235	# If it's still running try to kill it more forcefully
236	log_begin_msg "Stopping (force) $DESC" "$NAME"
237	force_stop
238	log_end_msg $?
239	fi
240	;;
241	restart\|force-reload)
242	log_begin_msg "Restarting $DESC" "$NAME"
243	stop_server
244	# Wait some sensible amount, some server need this
245	[ -n "$DODTIME" ] && sleep $DODTIME
246	start_server
247	running
248	log_end_msg $?
249	;;
250	status)
251
252	log_begin_msg "Checking status of $DESC" "$NAME"
253	if running ; then
254	log_begin_msg "running"
255	log_end_msg 0
256	else
257	log_warning_msg "apparently not running"
258	log_end_msg 1
259	exit 1
260	fi
261	;;
262	# Use this if the daemon cannot reload
263	reload)
264	log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon"
265	log_warning_msg "cannot re-read the config file (use restart)."
266	;;
267	*)
268	N=/etc/init.d/openvswitch-controller
269	echo "Usage: $N {start\|stop\|force-stop\|restart\|force-reload\|status}" >&2
270	exit 1
271	;;
272	esac
273
274	exit 0