Updated the release info with needed fixes and infoEnea_NFV_Access_2.4.0_RC2feature_CPDX-3521

Updated overflow issue in advanced config.

Change-Id: Ia9329872ea444de1f1acad3e921c09a8f2f3779f
Signed-off-by: mrpa <miruna.paun@enea.com>

4 files changed, 140 insertions, 86 deletions

diff --git a/doc/book-enea-nfv-access-getting-started/doc/advanced_configurations.xml b/doc/book-enea-nfv-access-getting-started/doc/advanced_configurations.xml
index 2a479b9..cb0ae5b 100644
--- a/doc/book-enea-nfv-access-getting-started/doc/advanced_configurations.xml
+++ b/doc/book-enea-nfv-access-getting-started/doc/advanced_configurations.xml
@@ -760,12 +760,14 @@ galera-4-26.4.6-1.el7.centos.x86_64</programlisting>
 <emphasis role="bold">wsrep_cluster_address="gcomm://192.168.10.11,192.168.10.12,..,192.168.10.16"</emphasis>
 
 # Human-readable node name (non-unique). Hostname by default.
-<emphasis role="bold">wsrep_node_name=Node1</emphasis> # current node's name. set node name for each server in the cluster
+<emphasis role="bold">wsrep_node_name=Node1</emphasis> # current node's name. set node name for each server in \
+the cluster
 
 # Base replication &lt;address|hostname&gt;[:port] of the node.
 # The values supplied will be used as defaults for state transfer receiving,
-# listening ports and so on. Default: address of the first network interface.
-<emphasis role="bold">wsrep_node_address=192.168.10.11</emphasis> #current node's interface IP . must be set for each node in the cluster</programlisting>
+# listening ports and so on. Default: address of the first network interface.\
+<emphasis role="bold">wsrep_node_address=192.168.10.11</emphasis> 
+#current node's interface IP . must be set for each node in the cluster</programlisting>
 
             <note>
               <para>Steps 2, 3 and 4 must be performed for each MariaDB node
diff --git a/doc/book-enea-nfv-access-release-info/doc/about_release.xml b/doc/book-enea-nfv-access-release-info/doc/about_release.xml
index 6141d1e..2078a30 100644
--- a/doc/book-enea-nfv-access-release-info/doc/about_release.xml
+++ b/doc/book-enea-nfv-access-release-info/doc/about_release.xml
@@ -38,10 +38,6 @@
       </listitem>
 
       <listitem>
-        <para>Enea_NFV_Access_AF-TH_&lt;version&gt;-build&lt;build_number&gt;.zip</para>
-      </listitem>
-
-      <listitem>
         <para>Enea_NFV_Access_uCPEManager_&lt;version&gt;-build&lt;build_number&gt;.tar.gz</para>
       </listitem>
 
@@ -52,6 +48,12 @@
       <listitem>
         <para>VNF_example_configurations.tar.gz</para>
       </listitem>
+      
+      <listitem>
+        <para>Enea_NFV_Access_AF-TH_&lt;version&gt;-build&lt;build_number&gt;.zip 
+          (deprecated, see <xref linkend="relinfo-changes-other">Section 2.1 New Features and
+  Improvements</xref>.)</para>
+      </listitem>
     </itemizedlist>
 
     <programlisting condition="arm">-- documentation/
@@ -132,45 +134,50 @@
       <listitem>
         <para><xi:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
         xmlns:xi="http://www.w3.org/2001/XInclude"
-        xpointer="element(book_enea_nfv_access_auto_fw_th_user_guide/1)" />.
-        Describes the Automation Framework and Test Harness for Enea NFV
-        Access and provides instructions regarding the necessary steps to run
-        these software tools.</para>
+        xpointer="element(book_enea_nfv_access_auto_fw_user_guide/1)" />. 
+                Describes the Automation Framework for Enea NFV Access.</para>
       </listitem>
 
       <listitem>
-        <para>Enea NFV Access Automation Framework User Guide. Describes the
-        Automation Framework for Enea NFV Access.</para>
+        <para><xi:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
+        xpointer="element(book_enea_nfv_access_auto_fw_th_user_guide/1)"
+        xmlns:xi="http://www.w3.org/2001/XInclude" />. Describes the 
+          Automation Framework and Test Harness for Enea NFV Access and 
+          provides instructions regarding the necessary steps to run these 
+          software tools (deprecated, see 
+          <xref linkend="relinfo-changes-other">Section 2.1 New Features 
+            and Improvements</xref>).</para>
       </listitem>
-
+          
       <listitem>
         <para><xi:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
         xmlns:xi="http://www.w3.org/2001/XInclude"
         xpointer="element(book_enea_nfv_access_system_test_specification/1)" />.
-        Describes a sample Test Suite for System Testing of Enea NFV
-        Access.</para>
+        Describes a sample Test Suite for System Testing of Enea NFV Access.
+        (deprecated, see <xref linkend="relinfo-changes-other">Section 2.1 
+          New Features and Improvements</xref>).</para>
       </listitem>
     </itemizedlist>
   </section>
 
   <section id="release-browsers">
-    <title>Supported Web Browsers<remark>These need to be
-    updated</remark></title>
+    <title>Supported Web Browsers</title>
+        
+        <remark>These need to be updated</remark>
 
-    <para>The current release has been tested using the following web
-    browsers:</para>
+    <para>The current release supports using the following web browsers:</para>
 
     <itemizedlist>
       <listitem>
-        <para>Google Chrome v86</para>
+        <para>Google Chrome (tested with version 86).</para>
       </listitem>
 
       <listitem>
-        <para>Mozilla Firefox v82</para>
+        <para>Mozilla Firefox (tested with version 82).</para>
       </listitem>
 
       <listitem>
-        <para>Microsoft Edge v84</para>
+        <para>Microsoft Edge (tested with version 84).</para>
       </listitem>
     </itemizedlist>
   </section>
diff --git a/doc/book-enea-nfv-access-release-info/doc/known_bugs_and_limitations.xml b/doc/book-enea-nfv-access-release-info/doc/known_bugs_and_limitations.xml
index 8282f23..31d3a03 100644
--- a/doc/book-enea-nfv-access-release-info/doc/known_bugs_and_limitations.xml
+++ b/doc/book-enea-nfv-access-release-info/doc/known_bugs_and_limitations.xml
@@ -84,39 +84,80 @@
     </listitem>
 
     <listitem>
-      <para><remark>ELCCR-912</remark>Adding an upgrade image into the Enea
-      uCPE Manager (<literal>Device &gt; Upgrade &gt; Add</literal>) fails,
-      producing the following error <literal>ostree: symbol lookup error:
-      /usr/local/lib/libostree-1.so.1: undefined symbol:
-      g_utf8_make_valid</literal>. This occurs when the Enea uCPE Manager is
-      installed on CentOS 7 prior to C7.1804 (kernel version &lt; 3.10.0-862).
-      As a workaround, update glib2 to version 2.54.2 or later, using
-      <command>#yum update glib2</command>.</para>
-    </listitem>
-
-    <listitem>
-      <para><remark>ELCCR-854</remark>Changing the management interface IP
-      address would result in a loss of connection with the device. If the
-      device is behind a NAT, while using Call Home connection, the connection
-      will not be reestablished until the old Call Home connection will cease
-      to exist. The exact amount of waiting time is determined by configurable
-      kernel parameters on the uCPE device, with the default waiting time of
-      more than 15 minutes. Restarting the vCPE Overlay will immediately
-      reestablish the connection, but that implies the existence of an
-      alternate way to trigger the vCPE restart operation on the
-      device.</para>
-    </listitem>
-
-    <listitem>
-      <para><remark>USERDOCAP-641</remark>Enea NFV Access does not support
-      IPv6 protocol.</para>
-    </listitem>
-
-    <listitem>
-      <para><remark>????</remark>On certain uCPE devices the Web-installer may
-      fail to create an NFV Access boot entry, this is a limitation in
-      firmware. The boot entry, however, will be detected automatically and
-      added by the firmware after a reboot.</para>
+      <para><remark>ELCCR-912</remark>When the Enea uCPE Manager is installed 
+        on CentOS 7, prior to C7.1804 (kernel version 3.10.0-862), adding an 
+        upgrade image fails. As a workaround, please update <literal>glib2</literal>
+        to version 2.54.2 or later, using <literal>#yum update glib2</literal>.</para>
+        </listitem>
+
+    <listitem>
+      <para><remark>ELCCR-854</remark>Changing the management interface IP address 
+        will result in a temporary loss of connection with the uCPE device. If the 
+        device is behind a NAT, while using the Call Home connection, 
+        reestablishing the connection automatically could take up to 20 minutes. 
+        Restarting the vCPE Overlay will immediately reestablish the connection, 
+        but that implies the existence of an alternate way to trigger the vCPE 
+        restart operation on the device.</para>
+    </listitem>
+
+    <listitem>
+      <para><remark>USERDOCAP-641</remark>Enea NFV Access does not have support 
+        for IPv6 addresses on both uCPE devices and the Enea uCPE Manager 
+        installation.</para>
+    </listitem>
+    
+    <listitem>
+      <para><remark>ELCCR-1428</remark>Wireless AP creation through the REST 
+        API does not validate that the wireless interface and LAN bridge are 
+        configured. Using these parameters may result in undefined behavior.</para>
+    </listitem>
+        
+        <listitem>
+      <para><remark>ELCCR-1351</remark>The updated <filename>.Keystore</filename>
+          and <filename>server.xml</filename> files from the 
+          <literal>/opt/ems/ucpemanager/application/3rdParty/apache-tomcat/conf/</literal> 
+          folder are overwritten during a product upgrade. As a workaround for 
+        this issue, after an upgrade, copy the updated <filename>.Keystore</filename> 
+        and <filename>server.xml</filename> files into the 
+        <literal>/opt/ems/ucpemanager/application/3rdParty/apache-tomcat/conf/</literal> 
+        folder and restart the ucpemanager service.</para>
+        </listitem>
+
+    <listitem>
+      <para><remark>ELCCR-1371</remark>The current self-signed certificate for 
+          the Enea uCPE Manager is generated at build time, with a hard-coded common-name 
+          causing the uCPE device upgrade to fail in HTTPS mode. As a workaround, 
+          another certificate (containing an IP based common-name) must be generated.</para>
+          
+          <para>Perform the following the steps to generate the certificate:</para>
+          
+          <orderedlist>
+                <listitem><para>Stop the uCPE Manager service.</para></listitem>
+                
+                <listitem><para>Create the certificate using the 
+                  <filename>createCertificate.sh</filename> script from distribution 
+                  folder. This will create a new <filename>.Keystore</filename> file 
+                  and copy it into the 
+                <literal>/opt/ems/ucpemanager/application/3rdParty/apache-tomcat/conf/config/certificates</literal> 
+                folder.</para></listitem>
+                
+                <listitem><para>Start the Enea uCPE Manager, the new certificate 
+                  should now take effect.</para></listitem>
+          </orderedlist>
+    </listitem>
+    
+    <listitem>
+      <para><remark>ELCCR-1378</remark>Modifying the type of the external interfaces can lead 
+        to errors. Instead of modifying, it is recommended to delete the old 
+        interfaces and recreate them with the desired type.</para>    
+    </listitem>
+    
+    <listitem>
+      <para><remark>ELCCR-907</remark>At times the VIP address is not acquired 
+        by any of the backup nodes if a power failure happens on primary node 
+        in a High Availability setup. To recover, follow the official documentation 
+        available at <ulink
+  url="https://mariadb.com/kb/en/galera-cluster-recovery/">Galera Cluster Recovery</ulink>.</para>    
     </listitem>
 
     <listitem condition="hidden">
diff --git a/doc/book-enea-nfv-access-release-info/doc/main_changes.xml b/doc/book-enea-nfv-access-release-info/doc/main_changes.xml
index 8d3e56c..10faf28 100644
--- a/doc/book-enea-nfv-access-release-info/doc/main_changes.xml
+++ b/doc/book-enea-nfv-access-release-info/doc/main_changes.xml
@@ -16,35 +16,18 @@
 
     <itemizedlist>
       <listitem>
-        <para><remark>CPDX-3500</remark>The Enea NFV Access Automation
-        Framework, a tool for automatic system configuration based on Python
-        scripting that will replace the existing Enea NFV Access Automation
-        Framework and Test Harness in the next major release.</para>
-
-        <para>The Enea NFV Access Automation Framework and Test Harness, and
-        its related documentation the <xi:include
-        href="../../s_docbuild/olinkdb/pardoc-common.xml"
-        xmlns:xi="http://www.w3.org/2001/XInclude"
-        xpointer="element(book_enea_nfv_access_auto_fw_th_user_guide/1)" />
-        and the <xi:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
-        xmlns:xi="http://www.w3.org/2001/XInclude"
-        xpointer="element(book_enea_nfv_access_system_test_specification/1)" />
-        are deprecated starting with Enea NFV Access 2.4.0.</para>
-      </listitem>
-
-      <listitem>
         <para><remark>CPDX-3496</remark>Embedded WiFi support for all-in-one
         store/home office deployment.</para>
       </listitem>
 
       <listitem>
-        <para><remark>CPDX-3499</remark>Expanded Hardware, OS and network
-        monitoring capability with InfluxDB and Grafana.</para>
+        <para><remark>CPDX-3499</remark>Expanded hardware, OS and network
+        monitoring capability with Grafana integration.</para>
       </listitem>
 
       <listitem>
-        <para><remark>CPDX-3498</remark>Redundant Enea uCPE Managers in active
-        standby configuration.</para>
+        <para><remark>CPDX-3498</remark>High Availability support with redundant 
+                Enea uCPE Managers in active standby configuration.</para>              
       </listitem>
 
       <listitem>
@@ -52,6 +35,23 @@
         simplified deployment of the Enea uCPE Manager in cloud
         environments.</para>
       </listitem>
+          
+      <listitem>
+        <para><remark>CPDX-3500</remark>The Enea NFV Access Automation
+        Framework, a tool for automatic system configuration based on Python
+        scripting that will replace the existing Enea NFV Access Automation
+        Framework and Test Harness in the next major release.</para>
+
+        <para>The Enea NFV Access Automation Framework and Test Harness, and
+        its related documentation the <xi:include
+        href="../../s_docbuild/olinkdb/pardoc-common.xml"
+        xmlns:xi="http://www.w3.org/2001/XInclude"
+        xpointer="element(book_enea_nfv_access_auto_fw_th_user_guide/1)" />
+        and the <xi:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
+        xmlns:xi="http://www.w3.org/2001/XInclude"
+        xpointer="element(book_enea_nfv_access_system_test_specification/1)" />
+        are deprecated starting with Enea NFV Access 2.4.0.</para>
+      </listitem>         
     </itemizedlist>
 
     <para><emphasis role="bold">Improvements:</emphasis></para>
@@ -125,28 +125,32 @@
       <listitem>
         <para><ns:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
         xpointer="element(book_enea_nfv_access_platform_open_source/1)"
-        xmlns:ns="http://www.w3.org/2001/XInclude" /></para>
+        xmlns:ns="http://www.w3.org/2001/XInclude" />.</para>
       </listitem>
 
       <listitem>
         <para><ns:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
         xpointer="element(book_enea_nfv_access_ucpem_open_source/1)"
-        xmlns:ns="http://www.w3.org/2001/XInclude" /></para>
+        xmlns:ns="http://www.w3.org/2001/XInclude" />.</para>
       </listitem>
-
-      <listitem>
+          
+          <listitem>
         <para><ns:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
-        xpointer="element(book_enea_nfv_access_auto_fw_th_open_source/1)"
-        xmlns:ns="http://www.w3.org/2001/XInclude" /></para>
+        xpointer="element(book_enea_nfv_access_telemetry_open_source/1)"
+        xmlns:ns="http://www.w3.org/2001/XInclude" />.</para>
       </listitem>
 
       <listitem>
-        <para>Enea NFV Access Automation Framework Open Source Report.</para>
+        <para><ns:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
+        xpointer="element(book_enea_nfv_access_auto_fw_open_source/1)"
+        xmlns:ns="http://www.w3.org/2001/XInclude" />.</para>
       </listitem>
 
       <listitem>
-        <para>Enea NFV Access Telemetry Open Source Report.</para>
-      </listitem>
+        <para><ns:include href="../../s_docbuild/olinkdb/pardoc-common.xml"
+        xpointer="element(book_enea_nfv_access_auto_fw_th_open_source/1)"
+        xmlns:ns="http://www.w3.org/2001/XInclude" />.</para>
+      </listitem>         
     </itemizedlist>
   </section>