Remove vck500, vhk158 and zcu670, these are not publicly available BSPs.

Signed-off-by: Mark Hatle <mark.hatle@amd.com>

4 files changed, 0 insertions, 154 deletions

diff --git a/meta-xilinx-bsp/README.md b/meta-xilinx-bsp/README.md
index 29177ad7..96a23687 100644
--- a/meta-xilinx-bsp/README.md
+++ b/meta-xilinx-bsp/README.md
@@ -37,14 +37,11 @@ The following boards are supported by the meta-xilinx-bsp layer:
 |            | [ZCU1285](https://www.xilinx.com/products/boards-and-kits/zcu1285.html)       | [zcu1285-zynqmp](conf/machine/zcu1285-zynqmp.conf)           | `zcu1285-zynqmp`      | `zcu1285-reva`                      | Yes         | Yes       |
 |            | [ZCU208](https://www.xilinx.com/products/boards-and-kits/zcu208.html)         | [zcu208-zynqmp](conf/machine/zcu208-zynqmp.conf)             | `zcu208-zynqmp`       | `zcu208-reva`                       | Yes         | Yes       |
 |            | [ZCU216](https://www.xilinx.com/products/boards-and-kits/zcu216.html)         | [zcu216-zynqmp](conf/machine/zcu216-zynqmp.conf)             | `zcu216-zynqmp`       | `zcu216-reva`                       | Yes         | Yes       |
-|            | [ZCU670](https://www.xilinx.com/products/boards-and-kits/zcu670.html)         | [zcu670-zynqmp](conf/machine/zcu670-zynqmp.conf)             | `zcu670-zynqmp`       | `zcu670-revb`                       | Yes         | Yes       |
 | Versal     | [VCK190](https://www.xilinx.com/products/boards-and-kits/vck190.html)         | [vck190-versal](conf/machine/vck190-versal.conf)             | `vck190-versal`       | `versal-vck190-reva-x-ebm-01-reva`  | Yes         | Yes       |
 |            | [VMK180](https://www.xilinx.com/products/boards-and-kits/vmk180.html)         | [vmk180-versal](conf/machine/vmk180-versal.conf)             | `vmk180-versal`       | `versal-vmk180-reva-x-ebm-01-reva`  | Yes         | Yes       |
-|            | [VCK5000](https://www.xilinx.com/products/boards-and-kits/vck5000.html)       | [vck5000-versal](conf/machine/vck5000-versal.conf)           | `vck5000-versal`      | `versal-vck5000-reva-x-ebm-01-reva` | No          | No        |
 |            | [VPK120](https://www.xilinx.com/products/boards-and-kits/vpk120.html)         | [vpk120-versal](conf/machine/vpk120-versal.conf)             | `vpk120-versal`       | `versal-vpk120-reva`                | Yes         | Yes       |
 |            | [VPK180](https://www.xilinx.com/products/boards-and-kits/vpk180.html)         | [vpk180-versal](conf/machine/vpk180-versal.conf)             | `vpk180-versal`       | `versal-vpk180-reva`                | Yes         | Yes       |
 |            | [VEK280](https://www.xilinx.com/products/boards-and-kits/vek280.html)         | [vek280-versal](conf/machine/vek280-versal.conf)             | `vek280-versal`       | `versal-vek280-reva`                | Yes         | Yes       |
-|            | [VHK158](https://www.xilinx.com/products/boards-and-kits/vhk158.html)         | [vhk158-versal](conf/machine/vhk158-versal.conf)             | `vhk158-versal`       | `versal-vhk158-reva`                | Yes         | Yes       |
 
 > **Note:** Additional information on Xilinx architectures can be found at:
         https://www.xilinx.com/products/silicon-devices.html
diff --git a/meta-xilinx-bsp/conf/machine/vck5000-versal.conf b/meta-xilinx-bsp/conf/machine/vck5000-versal.conf
deleted file mode 100644
index a80788cc..00000000
--- a/meta-xilinx-bsp/conf/machine/vck5000-versal.conf
+++ /dev/null
@@ -1,49 +0,0 @@
-#@TYPE: Machine
-#@NAME: vck500-versal
-#@DESCRIPTION: Machine configuration for the VCK5000 evaluation board.
-
-# Compatibility with old BOARD value.
-# TODO - Remove these once removed from petalinux bsp
-MACHINEOVERRIDES =. "vck5000:"
-
-#### Preamble
-MACHINEOVERRIDES =. "${@['', 'vck5000-versal:']['vck5000-versal' !='${MACHINE}']}"
-#### Regular settings follow
-
-# Variables that changes based on hw design or board specific requirement must be
-# defined before calling the required inclusion file else pre-expansion value
-# defined in versal-generic.conf will be set.
-
-# Yocto device-tree variables
-YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "versal_cips_0_pspmc_0_psv_sbsauart_0"
-YAML_DT_BOARD_FLAGS ?= "{BOARD template}"
-
-# Yocto arm-trusted-firmware(TF-A) variables
-ATF_CONSOLE_DEFAULT ?= "pl011"
-TFA_BL33_LOAD ?= "0x8000000"
-
-# Yocto PLM variables
-YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0"
-YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0"
-
-# Yocto KERNEL Variables
-UBOOT_ENTRYPOINT  ?= "0x200000"
-UBOOT_LOADADDRESS ?= "0x200000"
-
-# vck5000-versal Serial Console
-SERIAL_CONSOLES ?= "115200;ttyAMA0"
-YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200"
-
-# Required generic machine inclusion
-# VCK5000 board uses Versal AI Core device hence use soc variant based generic
-# machine inclusion
-require conf/machine/versal-ai-core-generic.conf
-
-# This machine conf file uses vck5000-versal xsa as reference input.
-# User can override with vck5000 custom xsa using HDF_BASE and HDF_PATH variables
-# from local.conf.
-HDF_MACHINE = "vck5000-versal"
-
-#### No additional settings should be after the Postamble
-#### Postamble
-PACKAGE_EXTRA_ARCHS:append = "${@['', 'vck5000_versal']['vck5000-versal' != '${MACHINE}']}"
diff --git a/meta-xilinx-bsp/conf/machine/vhk158-versal.conf b/meta-xilinx-bsp/conf/machine/vhk158-versal.conf
deleted file mode 100644
index 5c0406de..00000000
--- a/meta-xilinx-bsp/conf/machine/vhk158-versal.conf
+++ /dev/null
@@ -1,52 +0,0 @@
-#@TYPE: Machine
-#@NAME: vhk158-versal
-#@DESCRIPTION: Machine configuration for the VHK158 evaluation board.
-
-#### Preamble
-MACHINEOVERRIDES =. "${@['', 'vhk158-versal:']['vhk158-versal' !='${MACHINE}']}"
-#### Regular settings follow
-
-# Variables that changes based on hw design or board specific requirement must be
-# defined before calling the required inclusion file else pre-expansion value
-# defined in versal-generic.conf will be set.
-
-# Yocto device-tree variables
-YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "versal_cips_0_pspmc_0_psv_sbsauart_0"
-YAML_DT_BOARD_FLAGS ?= "{BOARD versal-vhk158-reva}"
-
-# Yocto arm-trusted-firmware(TF-A) variables
-ATF_CONSOLE_DEFAULT ?= "pl011"
-TFA_BL33_LOAD ?= "0x8000000"
-
-# Yocto PLM variables
-YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0"
-YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0"
-
-# Yocto KERNEL Variables
-UBOOT_ENTRYPOINT  ?= "0x200000"
-UBOOT_LOADADDRESS ?= "0x200000"
-
-# vhk158-versal Serial Console 
-SERIAL_CONSOLES ?= "115200;ttyAMA0"
-YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200"
-
-# Required generic machine inclusion
-# VHK158 board uses Versal HBM device hence use soc variant based generic
-# machine inclusion
-require conf/machine/versal-hbm-generic.conf
-
-# This machine conf file uses vhk158-versal xsa as reference input.
-# User can override with vhk158 custom xsa using HDF_BASE and HDF_PATH variables
-# from local.conf.
-HDF_MACHINE = "vhk158-versal"
-
-# VHK158 has 32GB memory only but default versal-generic has QB_MEM set to 8G,
-# Since versal-vhk158-reva.dts has 32GB set, we need set same in QB_MEM
-QB_MEM = "-m 32G"
-
-QEMU_HW_DTB_PS =  "${QEMU_HW_DTB_PATH}/board-versal-ps-vhk158.dtb"
-QEMU_HW_DTB_PMC = "${QEMU_HW_DTB_PATH}/board-versal-pmc-virt.dtb"
-
-#### No additional settings should be after the Postamble
-#### Postamble
-PACKAGE_EXTRA_ARCHS:append = "${@['', 'vhk158_versal']['vhk158-versal' != '${MACHINE}']}"
\ No newline at end of file
diff --git a/meta-xilinx-bsp/conf/machine/zcu670-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu670-zynqmp.conf
deleted file mode 100644
index 6b1dd488..00000000
--- a/meta-xilinx-bsp/conf/machine/zcu670-zynqmp.conf
+++ /dev/null
@@ -1,50 +0,0 @@
-#@TYPE: Machine
-#@NAME: zcu670-zynqmp
-#@DESCRIPTION: Machine configuration for the ZCU670 evaluation board.
-
-#### Preamble
-MACHINEOVERRIDES =. "${@['', 'zcu670-zynqmp:']['zcu670-zynqmp' !='${MACHINE}']}"
-#### Regular settings follow
-
-# Variables that changes based on hw design or board specific requirement must be
-# defined before calling the required inclusion file else pre-expansion value
-# defined in zynqmp-generic.conf will be set.
-
-# Yocto device-tree variables
-YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0"
-YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0"
-YAML_DT_BOARD_FLAGS ?= "{BOARD zcu670-revb}"
-
-# Yocto arm-trusted-firmware(TF-A) variables
-ATF_CONSOLE_DEFAULT ?= "cadence"
-TFA_BL33_LOAD ?= "0x8000000"
-
-# Yocto PMUFW variables
-YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0"
-YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0"
-
-# Yocto FSBL variables
-YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0"
-YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0"
-
-# Yocto KERNEL Variables
-UBOOT_ENTRYPOINT  ?= "0x200000"
-UBOOT_LOADADDRESS ?= "0x200000"
-
-# zcu670-zynqmp Serial Console 
-SERIAL_CONSOLES ?= "115200;ttyPS0"
-YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200"
-
-# Required generic machine inclusion
-# ZCU670 board uses ZynqMP DR device hence use soc variant based generic machine
-# inclusion
-require conf/machine/zynqmp-dr-generic.conf
-
-# This eval board machine conf file uses zcu670-zynqmp xsa as reference input.
-# User can override with zcu670 custom xsa using HDF_BASE and HDF_PATH variables
-# from local.conf.
-HDF_MACHINE = "zcu670-zynqmp"
-
-#### No additional settings should be after the Postamble
-#### Postamble
-PACKAGE_EXTRA_ARCHS:append = "${@['', 'zcu670_zynqmp']['zcu670-zynqmp' != '${MACHINE}']}"