summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* meta-xilinx-standalone: gcc-xilinx-standalone: Microblaze disable ↵Mark Hatle2024-04-262-0/+5
| | | | | | | | | | | | | | transactional memory These two files were missed when the other part of the patch was applied. On microblaze, add "--disable-tm-clone-registry" due to the image size increasing Disable TM clone registry in libgcc. It is enabled in libgcc by default. This option helps to reduce code size for embedded targets which do not use transactional memory. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* Revert "embeddedsw : Updated SRCREV for 2024.1_7731"Siva Addepalli2024-04-261-1/+1
| | | | This reverts commit 91cb12f9021cde165cb525f31044f03315440fc3.
* embeddedsw : Updated SRCREV for 2024.1_7731Sivaprasad Addepalli2024-04-261-1/+1
| | | | | | | | | | | | | | | Updated changelog for 2024.1 components-5 sw_services:xilrsa:Added additional files missing property to clean the target VPROCSS: Subcore array definition fix for VPSS dfeprach: Configure si570 in Linux examples dfeofdm: Configure si570 in Linux examples dfemix: Configure si570 in Linux examples dfeequ: Configure si570 in Linux examples dfeccf: Configure si570 in Linux examples Updated changelog for 2024.1 components-4 Updated changelog for 2024.1 components-2 Updated changelog for 2024.1 components-3 OpenAMP: Remove hard-coding cmake paths and dependencies
* aie-rt : Updated SRCREV for 2024.1_4207Sivaprasad Addepalli2024-04-261-1/+1
| | | | | driver: src: Added StarCol in XAie_GetTileBitPosFromLoc for non-zero partition and correction in SetColumnClk for set & cleat Bitmap. driver: src: Remove resource files from CMake
* linux-xlnx : Updated SRCREV for 2024.1_7479Sivaprasad Addepalli2024-04-251-1/+1
| | | | | | | | | | phy: xilinx-xhdmiphy: Add support for FRL 6G 3-lane mode phy: xilinx-xhdmiphy: Fix bug in xhdmiphy_rpll_param function phy: xilinx-xhdmiphy: Fix configuring retimer chip in HDMI 2.1 mode phy: xilinx-xhdmiphy: Clear all the config flags after being served phy: xilinx-xhdmiphy: Select FRL clock source after configuring in HDMI 2.1 mode firmware: xilinx: Fix feature check for crypto drivers usb: udc: remove warning when queue disabled ep
* vdu-ctrl-sw : Updated SRCREV for 2024.1_4667Sivaprasad Addepalli2024-04-251-1/+1
| | | | Fixed buildpath QA warning
* u-boot-xlnx : Updated SRCREV for 2024.1_6415Sivaprasad Addepalli2024-04-251-1/+1
| | | | mtd: spi-nor: Fix OSPI probe issue in stacked mode.
* embeddedsw : Updated SRCREV for 2024.1_6307Sivaprasad Addepalli2024-04-231-1/+1
| | | | | | | | | | Updated changelog for 2024.1 components_1 dsirxss: Update dsirxss to dsi2rxss. dsi2rx: Add new subcore driver for DSI RX. ThirdParty: openamp: Add Compiler flag -Os for applications by default BSP: cortexr5: Support lockstep_mode_debug in SDT flow iomodule: Ensure that xio.h is included only for MB and MB-V scripts:pyesw:create_bsp: Update the Findcommon.cmake file to maintain backward compatibility for NON_YOCTO variable
* aie-rt : Updated SRCREV for 2024.1_7267Sivaprasad Addepalli2024-04-231-1/+1
| | | | | fal: src: Fix combo event resource ID driver: src: io_backend: Clear TileInUse Bitmap _XAie_PrivilegeInitPart API
* meta-xilinx-standalone: gcc-xilinx-standalone: Microblaze disable ↵Mark Hatle2024-04-221-0/+1
| | | | | | | | | | | | transactional memory On microblaze, add "--disable-tm-clone-registry" due to the image size increasing Disable TM clone registry in libgcc. It is enabled in libgcc by default. This option helps to reduce code size for embedded targets which do not use transactional memory. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* linux-xlnx : Updated SRCREV for 2024.1_2095Sivaprasad Addepalli2024-04-221-1/+1
| | | | | | | | | | | | misc: rsmu: add rsmu cdev driver ptp: 82p33: move register definitions out of ptp folder mfd: rsmu: add FemtoClock3 support mfd: rsmu: support I2C SMBus access ptp: clockmatrix: move register and firmware related definition to idt8a340_reg.h ptp: clockmatrix: Fix caps.max_adj to reflect DPLL_MAX_FREQ_OFFSET[MAX_FFO] ptp: clockmatrix: dco input-to-output delay is 20 FOD cycles + 8ns ptp: clockmatrix: set write phase timer to 0 when not in PCW mode ptp: clockmatrix: support 32-bit address space
* u-boot-xlnx : Updated SRCREV for 2024.1_2155Sivaprasad Addepalli2024-04-221-1/+1
| | | | | Revert "Revert "lmb: consider EFI memory map"" common: fdt: replace error prints to debug
* embeddedsw : Updated SRCREV for 2024.1_4987Sivaprasad Addepalli2024-04-221-1/+1
| | | | | | | | dfeofdm: Update hw version in yamal sw_services: xloader: Added DDRMC registers Dump logs in Versal sw_services: xiltimer: Fix doxygen warnings sw_services: xiltimer: Add support for tick and sleep timers sw_services: xloader: Added DDRMC registers Dump logs in Versal-Net
* embeddedsw : Updated SRCREV for 2024.1_3487Sivaprasad Addepalli2024-04-191-1/+1
| | | | | | | | sw_services:xilsecure:Fixed doxygen warnings Revert "sw_services:Fixed doxygen warnings" sw_services: xilocp: Fix the size of buffer passed to XPlmi_MemSet sw_services:Fixed doxygen warnings sw_services: xilsecure: Update SHA2 minor version
* xilloader_2024.1: Updated dependency of xilloader library recipeNandanikhil Gajulapally2024-04-181-1/+1
| | | | | | | added xilsem as a dependency to xilloader. Signed-off-by: Nandanikhil Gajulapally <nandanikhil.gajulapally@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* ai-engine-driver: Switch to recipe versioningMark Hatle2024-04-181-1/+0
| | | | | | The hard coded PV = '3.3' does not match the recipe version which is 3.5. Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* embeddedsw : Updated SRCREV for 2024.1_2451Sivaprasad Addepalli2024-04-181-1/+1
| | | | | | | | | v_hdmitxss1: Exdes Independent mode Fix v_hdmirxss1: Exdes Independent mode fix csudma: Fix peripheral test failure for MB designs iicps: Add doxygen and editorial fixes mipicsiss: update CPHY support only for Rigel flow v_sdirx: Fix HD/SD/3G modes without st352 payload
* embeddedsw : Updated SRCREV for 2024.1_7559Sivaprasad Addepalli2024-04-171-1/+1
| | | | | | | | | | | sdps: Add doxygen and editorial fixes qspipsu: Add doxygen fixes ospipsv: Add doxygen and editorial fixes gpio: Add doxygen and editorial fixes sysmonpsv: Add doxygen and editorial fixes sw_services: xilplmi: Fix doxygen warnings ttcps: Add support for compiling examples in Yocto flow sw_services: xilloader: Added glitch checks after function call
* xen : Updated SRCREV for 2024.1_6403Sivaprasad Addepalli2024-04-171-1/+1
| | | | | xen/arm: fix build failure with XSM and PCI_PASSTHROUGH common: overlay: Fix array-out-of-bounds in dt_overlay_sysctl()
* linux-xlnx : Updated SRCREV for 2024.1_8599Sivaprasad Addepalli2024-04-171-1/+1
| | | | drivers: mailbox: handle SGI for shared IPI
* u-boot-xlnx : Updated SRCREV for 2024.1_8507Sivaprasad Addepalli2024-04-171-1/+1
| | | | spi: cadence_qspi: Fix OSPI probe issue when the prescaler is set to 2
* Fixed: Warnings related to QA issue: obsolete licenses GPLv2 [obsolete-license]Virendra Nakaskar2024-04-162-2/+2
| | | | | | | | | | | Removed Warning related obsolete licenses GPLv2 WARNING: kernel-module-vdu-1.0.0-xilinx-v2024.1+gitAUTOINC+25773344ce-r0 do_package_qa: QA Issue: Recipe LICENSE includes obsolete licenses GPLv2 [obsolete-license] Signed-off-by: Virendra Nakaskar <Virendra.Nakaskar2@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* aie-rt: Move to xlnx_rel_v2024.1 branchMark Hatle2024-04-161-2/+2
| | | | | | | Changelog: driver: src: io_backend: Request tiles before gating clocks Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* embeddedsw : Updated SRCREV for 2024.1_7987Sivaprasad Addepalli2024-04-161-1/+1
| | | | | v_hdmitxss: TxOnly: Fix compilation error with Txonly design v_hdmirxss: RxOnly: Fix compilation error with Rxonly design
* xrt, zocl: change commit idsaumya garg2024-04-151-2/+2
| | | | | | | | | | | | Changelog: Fix to handle input_ports_details and output_ports_details Interface tiles metric for PLIO designs (#8064) Changing a copy to a move for when profiling samples are written (#8065) VITIS-11806 Command-chaining: XRT C++ Command List (#8063) VITIS-11832 - Support transaction buffer patching in XRT (#8059) fix printing logs on windows (#8062) using the correct workspace path for windows (#8061) Signed-off-by: saumya garg <saumya.garg@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* embeddedsw : Updated SRCREV for 2024.1_4703Sivaprasad Addepalli2024-04-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | update Embedded SW license 2024.1 release sw_services: xilfpga: Add doxygen fixes sysmonpsu: Add Xiltimer to CMakeLists scripts: pyesw: Enable user-driven customization of library options for xilpm trngpsv: Update trngpsv minor version trngpsx: Update trngpsx minor version sw_services: xilsecure: Update minor version number to 24.1 sw_services:xilocp: Fix DME failure sysmonpsv: Handle Secondary SLRs sw_services:xilsecure:Fix Branch Past initialization sw_services:xilsecure:Fix MISRA-C Rule 17.7 sw_services:xilsecure:Fix MISRA-C Rule 10.3 sw_services:xilsecure:Fix overrun issue sw_services: xilpm: Enable the capability to adjust bsp config flags in the Rigel flow freertos10_xilinx: Fix portPOINTER_SIZE_TYPE value for Cortex A78 scripts: pyesw: retarget_app: Add support for shared workspace use case xilpm: versal_common: server: Add a macro to exclude USB idle code bsp: Add macro to disable long values print support as needed dp12txss: examples: Fix IIC Baseaddress for new unified version dp12rxss: examples: Fix IIC Baseaddress for new unified version xilpm: versal: NoC ScanClear workaround for xcvm2152
* linux-xlnx : Updated SRCREV for 2024.1_8411Sivaprasad Addepalli2024-04-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | microblaze: Change TLB mapping and free space allocation arm64: versal-net Add dcc node and dcc in aliases for versal-net-ipp-rev1.9.dts arm64: zynqmp: Disable Tri-state for SDIO arm64: dts: zynqmp: make hw-ecc as the default ecc mode mailbox: zynqmp: Enable Bufferless IPI usage on Versal-based SOCs mailbox: zynqmp: Move buffered IPI setup to of_match selected routine mailbox: zynqmp: Move of_match structure closer to usage phy: xilinx-xhdmiphy: Configure retimer at FRL training linerate video/hdmi: Add support for version 3 AVI Infoframe phy: xilinx-xhdmiphy: Configure HDMIPHY in TMDS mode drm: xlnx: hdmi: Set wait event flag for TMDS mode drm: xlnx: hdmi: Fix TMDS clock calculation for RGB YUV422 YUV444 formats phy: xilinx-xhdmiphy: Add pll-selection allowed range of values for GTYP/GTYE5 drm: xlnx: hdmi: Fix overwriting the max_frl_rate variable drm: xlnx: hdmi: Downgrade the FRL rate when sink requests drm: xlnx: hdmi: Fix lts2 state machine drm: xlnx: hdmi: Implement xlnx_hdmi_frl_config function drm: xlnx: hdmi: Implement streamdown callback function drm: xlnx: hdmi: Add support for all FRL line rates drm: xlnx: hdmi: Implement streamup callback function drm: xlnx: hdmi: Implement connect callback function drm: xlnx: hdmi: Set wait event flag in ltsp state drm: xlnx: hdmi: Fix FRL link and video clock values drm: xlnx: hdmi: Fix VTC macros as per the IP specification phy: xilinx-xhdmiphy: Fix MMCM parameter values for GTYE5/GTYP drm: xlnx: hdmi: Optimize phy configuration function calls firmware: xilinx: Dont send linux address to get fpga config get status
* embeddedsw : Updated SRCREV for 2024.1_8603Sivaprasad Addepalli2024-04-121-1/+1
| | | | | | | | | | | | | | xilpm: versal_common: server: Add error message for PSM-PLM version conflict lib: sw_services: versal_common: Add check for the IPI permission access in feature check API lwip : Add lwip_dhcp_does_acd_check sw_services:xilnvm:versalnet:Fix for MISRA-C Rule 8.3 sw_services:xilnvm:versalnet:Fix for coverity warning sw_services:xilnvm:versalnet:Fix MISRA-C Rule 12.1 XilSkey: efuse status bits of ultrascale devices srec_bootloader: Fix compilation error on Microblaze RISC-V xilpm: versal: server: Skip NoC clock gating consideration during the boot uartns550: Fix compilation warning of interrupt example dp14txss:zcu102_pt_hdcp: Modified applicaiton to continue without hdcp incase of wrong password entered during fetching keys from EEPROM.
* qemu : Updated SRCREV for 2024.1_4679Sivaprasad Addepalli2024-04-121-1/+1
| | | | | | fdt_generic_devices: Add phy aliases arm_generic_fdt: Create ethernet phy in postinit fdt_generic_util: Add a postinit call back
* openamp-layer: Move from 2024 to xlnx_rel_v2024.1Mark Hatle2024-04-102-2/+2
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* Switch from master to xlnx_rel_v2024.1 branchMark Hatle2024-04-1016-16/+16
| | | | Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* lopper: update SRCREVBen Levinsky2024-04-101-1/+1
| | | | | | | 30bed2b openamp: xlnx: Add vc-p and vn-p models Signed-off-by: Ben Levinsky <ben.levinsky@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* xrt, zocl: Update commit idsaumya garg2024-04-101-1/+1
| | | | | | | | | | | | | | | Changelog: Cleanup clangtidy warnings (#8057) Providing a work-around to allocate instruction buffer in HIP (#8047) SC warning fix on RAVE and xsabin extension warning fix on Versal (#8053) aie-status reports fix (#8051) VITIS-11503 - Dump instruction bo created from Elf so verification can be done (#8043) VITIS-11503 - change elf section name from mc_code to control-packet (#8054) Defining Mailbox Macro for QDMA to fix APU crash on RAVE (#8052) revert sdr changes (#8049) ML Timeline Plugin should read timestamp data before AIE Profile/Debug (#8045) Signed-off-by: saumya garg <saumya.garg@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* lopper: srcrev updateBen Levinsky2024-04-101-1/+1
| | | | | | | openamp: xlnx: versal: match model parsing same as VNET Signed-off-by: Ben Levinsky <ben.levinsky@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* embeddedsw : Updated SRCREV for 2024.1_3975Sivaprasad Addepalli2024-04-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | zynqmp_pmufw: Update FPGA config reg status to use local buf dp21txss: Add support for octa pixel mode dp21txss: Add support for OctaPixel Mode dp21rxss: Add support for OctaPixel Mode dp21: Add support for octa pixel mode dp21: Add support for OctaPixel Mode dp21: Fix C++ warnings dp14: Fix C++ warnings sw_services:xilocp:Fix issue for getting swpcr data sw_services:xilocp: Clear memory buffer after calculating PCR xilplmi: Correct configuration read format for VP1902 device. xilsem: Correct configuration read format for VP1902. i2s: Fix C++ compilation errors sw_services: xilcert: Fixed calculation of hash in serial field xilsecure: fixed header inclusion in SDT flow dfeofdm: Update hw version emacps: Fix HwTail check in XEmacPs_BdRingFromHwRX sw_services:xilnvm:Update validation check during additional PPK programming BSP: riscv: Fix instruction cache APIs dfeprach: Update device node name usbpsu: Add doxygen and editorial fixes sw_services: xilpm: Remove usage of GSW ERROR register in BISR code esw: In SDT flow for the Microblaze processor, include libgloss in the link libraries by default sw_services:xilskey:Add description for XILSKEY_PUF_KEK_REGEN_RDY_TIMEOUT xilpm: versal_common: server: Remove PGGS2 and PGGS3 related code
* linux-xlnx : Updated SRCREV for 2024.1_9495Sivaprasad Addepalli2024-04-101-1/+1
| | | | | | | | | | | | | | | | net: axienet: Correct tx_buff size when DRE is not enabled clk: clocking-wizard: calculate dividers fractional parts v4l: xilinx: dprxss: Fix xhdcp1x_rx_init() function declaration v4l: xilinx: dprxss: Fix gcc warning staging: xilinx_hdcp: Fix gcc warning mtd: spi-nor: Use same bit mask macro in spi & spi-nor core Revert "drivers: clk: zynqmp: add hack to use old algorithm for divider round rate" fpga: Fix the reset handling remoteproc: zynqmp_r5: Clean up support for Versal NET CTCM mtd: spi-nor: Add support for BP3 at SR bit 5 mtd: spi-nor: Use params->size for flash size info mtd: spi-nor: Avoid writing EAR register for flashes less than 16MB mtd: spi-nor: Use nor->info->id[0] for manufacturer id
* aie-rt : Updated SRCREV for 2024.1_2471Sivaprasad Addepalli2024-04-101-1/+1
| | | | driver:src:Softpartition boundary Isolation fixed
* embeddedsw : Updated SRCREV for 2024.1_8591Sivaprasad Addepalli2024-04-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Updated sysmonpsv to 4.2 Revert "sysmonpsv: Added SSIT Support" BSP: riscv: Fix FPU context handling in trap handler vphy: Added support for DP2.1 sw_services:xilocp:Fix review comments for XOcp_DmeXppuConfig sw_services:xilloader:Fixed doxygen comments format TPG: Addition of bool library in header file bsp: cortexr52: Use PMU as default timer for Cortex-R52 sw_services: xilplmi: Fix MISRA-C violation 8.6 sw_services: xilplmi: Fix MISRA-C violation 2.2 sw_services: xilplmi: Fix MISRA-C violation 17.8 sw_services: xilplmi: Fix MISRA-C violation 10.3 mipicsiss: example: update GPIO address. sw_apps: zynqmp_pmufw: Correct typo for SOM specific macro dp21: Fix linking issues in C++ dp14: Fix linking issues in C++ dp12: Fix linking issues in C++ rfdc: NCO Frequency xilplmi: added CDO debug prints intc: Fix xintc_low_level_example for HW designs with fast interrupts
* versal-ai-edge-generic: Fix QEMU boot issueSandeep Gundlupet Raju2024-04-091-0/+6
| | | | | | | | | | | | | | VEK280 SDT QEMU doesn't come up with PLM, this to default QEMU_HW_DTB_PS used from versal-generic.conf file doesn't work for VEK280 machine conf file. Fix QEMU PLM boot issue by setting the right QEMU_HW_DTB_PS to board-versal-ps-vek280.dtb and also adjust the QB_MEM to 12GB to match with board dtsi file, we need set same in QB_MEM for QEMU boot. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* README.sdt.bsp.md: Update README with QB_MEM infoSandeep Gundlupet Raju2024-04-091-17/+24
| | | | | | | | Update README with QB_MEM info to boot QEMU using SDT builds. Also fix typo in README. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* versal-hbm-generic: Fix QEMU boot issueSandeep Gundlupet Raju2024-04-081-0/+6
| | | | | | | | | | | | | | VHK158 SDT QEMU doesn't come up with PLM, this to default QEMU_HW_DTB_PS used from versal-generic.conf file doesn't work for VHK158 machine conf file. Fix QEMU PLM boot issue by setting the right QEMU_HW_DTB_PS to board-versal-ps-vmk158.dtb and also adjust the QB_MEM to 32GB as versal-vhk158-reva.dts has 32GB set, we need set same in QB_MEM for QEMU boot. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* lopper: Update SRCREV for lopperOnkar Harsh2024-04-081-1/+1
| | | | | | | | | | | | The SRCREV update contains below commits: assists: generate_config_object: Enable user-driven customization of library options assists: generate_config_object: Addressed the scenario where, not all masters are reset masters lopper:assists:baremetallinker: Do not consider linear SPIs for memory tests lopper:assists:gen_domain_dts: Remove axi_noc and noc_ddr4 IPs from linux ignore list base: add expression to clock phandle description Signed-off-by: Onkar Harsh <onkar.harsh@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* README.sdt.bsp.md: Add system device tree bsp READMESandeep Gundlupet Raju2024-04-081-0/+39
| | | | | | | | Add system device tree bsp README which provide BSP settings such as QEMU PMC/PMU DTB, QEMU PS DTB etc. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* versal-prime-generic: Fix QEMU PLM boot issueSandeep Gundlupet Raju2024-04-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QEMU PLM error code are observed as shown below. [13422.262]**************************************** [13422.490]Xilinx Versal Platform Loader and Manager [13422.508]Release 2024.1 Mar 30 2024 - 14:13:53 [13422.562]Platform Version: v0.0 PMC: v0.0, PS: v0.0 [13422.588]BOOTMODE: 0x5, MULTIBOOT: 0xF0000000 [13422.608]**************************************** [13427.899]Non Secure Boot [13441.028]PLM Initialization Time [13441.090]***********Boot PDI Load: Started*********** [13441.191]Loading PDI from SD1 [13441.218]Monolithic/Master Device [14850.660]1409.510 ms: PDI initialization time [14850.719]+++Loading Image#: 0x1, Name: lpd, Id: 0x04210002 [14850.755]---Loading Partition#: 0x1, Id: 0xC [14892.625] 41.831 ms for Partition#: 0x1, Size: 11360 Bytes [14893.706]---Loading Partition#: 0x2, Id: 0x0 [14902.163] 7.679 ms for Partition#: 0x2, Size: 65104 Bytes PSM Firmware version: 2024.1 [Build: Mar 30 2024 14:13:53 ] [15013.595]+++Loading Image#: 0x2, Name: pl_cfi, Id: 0x18700000 [15014.589]---Loading Partition#: 0x3, Id: 0x3 [21947.779]Polling 0xF11A0000 Mask: 0xFFFFFFFF ExpectedValue: 0x14CAA093 [21949.039]MaskPoll: Addr: 0x0F11A0000, Mask: 0xFFFFFFFF, ExpVal: 0x14CAA093, Timeout: 1000000, RegVal: 0x14CA8093 ...ERROR [21951.067]CMD: 0x00040101 execute failed, Processed Cdo Length 0x84 [21952.260]CMD Payload START, Len:0x00000004 0x00000000F20000A8: 0xF11A0000 0xFFFFFFFF 0x14CAA093 0x00000001 0x00000000F20000B4: [21954.516]CMD Payload END [21955.035]Error loading PL data: CFU_ISR: 0x00000000, CFU_STATUS: 0x0000080C PMC ERR1: 0x00000000, PMC ERR2: 0x00000000 [21957.810]PLM Error Status: 0x21010001 [21958.489]============Register Dump============ [21959.269]PMC_TAP_IDCODE: 0x14CA8093 [21959.887]EFUSE_CACHE_IP_DISABLE_0(EXTENDED IDCODE): 0x00004000 [21960.901]PMC_TAP_VERSION: 0x03000000 [21961.516]CRP_BOOT_MODE_USER: 0x00000005 [21962.179]CRP_BOOT_MODE_POR: 0x00000005 [21962.823]CRP_RESET_REASON: 0x00000202 [21963.462]PMC_GLOBAL_PMC_MULTI_BOOT: 0xF0000000 [21964.242]PMC_GLOBAL_PWR_STATUS: 0x00000000 [21964.946]PMC_GLOBAL_PMC_GSW_ERR: 0x00000000 [21965.666]PMC_GLOBAL_PLM_ERR: 0x00000000 [21966.342]PMC_GLOBAL_PMC_ERR1_STATUS: 0x00000000 [21967.136]PMC_GLOBAL_PMC_ERR2_STATUS: 0x00000000 [21967.917]PMC_GLOBAL_GICP0_IRQ_STATUS: 0x20000000 [21968.713]PMC_GLOBAL_GICP1_IRQ_STATUS: 0x00000000 [21969.507]PMC_GLOBAL_GICP2_IRQ_STATUS: 0x00000000 [21970.307]PMC_GLOBAL_GICP3_IRQ_STATUS: 0x00000000 [21971.113]PMC_GLOBAL_GICP4_IRQ_STATUS: 0x00000000 [21971.921]PMC_GLOBAL_GICP_PMC_IRQ_STATUS: 0x00000000 [21972.767]============Register Dump============ This is due to default QEMU_HW_DTB_PS used from versal-generic.conf file doesn't work for VMK180 machine conf file. Fix QEMU PLM boot issue by setting the right QEMU_HW_DTB_PS to board-versal-ps-vmk180.dtb. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* versal-generic.conf: Update QEMU_HW_DTB_PMCSandeep Gundlupet Raju2024-04-081-1/+1
| | | | | | | | | Update QEMU_HW_DTB_PMC to use board-versal-pmc-virt.dtb instead of board-versal-pmc-vc-p-a2197-00.dtb as board-versal-pmc-vc-p-a2197-00.dtb dtb targets tenzing board. Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com> Signed-off-by: Mark Hatle <mark.hatle@amd.com>
* u-boot-xlnx : Updated SRCREV for 2024.1_5819Sivaprasad Addepalli2024-04-081-1/+1
| | | | | | | | | | | arm64: versal-net Add dcc node and dcc in aliases for versal-net-ipp-rev1.9.dts mtd: spi-nor: Remove SPI_NOR_OCTAL_READ flag soc: zynqmp: Add the IDcode for TEG variant zlib: Remove incorrect ZLIB_VERSION zlib: Port fix for CVE-2016-9841 to U-Boot zlib: Rename write variable to wnext (window write index) zlib: Rename this variable to here (current decoding table entry) configs: versal: Disable the config for spansion flash
* qemu : Updated SRCREV for 2024.1_2095Sivaprasad Addepalli2024-04-081-1/+1
| | | | m25p80: Consider 4byte address for octal ddr mode
* dts : Updated SRCREV for 2024.1_1751Sivaprasad Addepalli2024-04-081-1/+1
| | | | vck190: Add 2g OSPI flash
* dts : Updated SRCREV for 2024.1_2055Sivaprasad Addepalli2024-04-081-1/+1
| | | | | | versal: Add support for xqvm1102, xqve2102, xqvp2502, xqvp1052 and xqve2302 versal: Add support for xave2602 and xave2802 versal: SE variants support
* dts : Updated SRCREV for 2024.1_6971Sivaprasad Addepalli2024-04-051-1/+1
| | | | | | versal: Add support for the SE variant of xcvp1002 versal: Add support for the SE variant of xcvm2152 versal: Add support for xcvm2152